ISO/TS 21748:2004
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
03-20-2019
Superseded by
Language(s)
English, French
Published date
03-26-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
TS 21748:2004 gives guidance for the evaluation of measurement uncertainties using data obtained from studies conducted in accordance with ISO 5725-2, and for the comparison of collaborative study results with measurement uncertainty obtained using formal principles of uncertainty propagation. TS 21748:2003 is applicable in all measurement and test fields where an uncertainty associated with a result has to be determined, but does not describe the application of repeatability data in the absence of reproducibility data. The recommendations in this document are primarily for guidance.
| DevelopmentNote |
DRAFT ISO/DIS 21748 is also available for this standard. (01/2009)
|
| DocumentType |
Technical Specification
|
| Pages |
30
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| DD ISO/TS 21748:2004 | Identical |
| NF ISO/TS 21748 : 2004 FD | Identical |
| NEN NPR ISO/TS 21748 : 2004 | Identical |
| 10/30219384 DC : 0 | BS EN 15104 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| 10/30219396 DC : 0 | BS EN 15297 - SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| DIN EN 15297:2011-04 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| BS EN 15290:2011 | Solid biofuels. Determination of major elements. Al, Ca, Fe, Mg, P, K, Si, Na and Ti |
| UNE-EN ISO 14644-9:2014 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| 08/30099658 DC : DRAFT OCT 2008 | BS ISO 16900-4 - RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST AND TEST EQUIPMENT - PART 4: DETERMINATION OF GAS FILTER CAPACITY |
| ISO 5667-20:2008 | Water quality Sampling Part 20: Guidance on the use of sampling data for decision making Compliance with thresholds and classification systems |
| DIN ISO 16900-4:2015-09 (Draft) | RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST AND TEST EQUIPMENT - PART 4: DETERMINATION OF GAS FILTER CAPACITY AND MIGRATION, DESORPTION AND CARBON MONOXIDE DYNAMIC TESTING (ISO 16900-4:2011) |
| 11/30227624 DC : 0 | BS EN ISO 14720-2 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 2: INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP/AES) OR ION CHROMATOGRAPHY AFTER BURNING IN AN OXYGEN FLOW |
| 05/30133024 DC : DRAFT APR 2005 | EN 482 - WORKPLACE ATMOSPHERES - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| 10/30235960 DC : 0 | BS EN 482 - WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| UNI EN ISO 21258 : 2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| I.S. EN 15297:2011 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| UNE-EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| ISO/TS 21749:2005 | Measurement uncertainty for metrological applications — Repeated measurements and nested experiments |
| UNE-EN 15290:2011 | Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti |
| CSA ISO 16968 : 2015 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| I.S. EN 838:2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| EN 15297:2011 | Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| EN 1076:2009 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| EN 15290:2011 | Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti |
| EN 13890:2009 | Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods |
| ASME PTC22 : 2014 | GAS TURBINES |
| 09/30205176 DC : 0 | ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY |
| 10/30174936 DC : 0 | BS ISO 11352 - WATER QUALITY - DETERMINATION OF MEASUREMENT UNCERTAINTY BASED ON VALIDATION DATA |
| 11/30227621 DC : DRAFT MAY 2011 | BS EN ISO 14720-1 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DETERMINATION OF SULFUR IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS - PART 1: INFRARED MEASUREMENT METHODS |
| BS ISO 16900-4:2011 | Respiratory protective devices. Methods of test and test equipment Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing |
| BS EN 15105:2011 | Solid biofuels. Determination of the water soluble chloride, sodium and potassium content |
| 06/30112308 DC : 0 | EN ISO 13530 - WATER QUALITY - GUIDANCE ON ANALYTICAL QUALITY CONTROL FOR CHEMICAL AND PHYSICOCHEMICAL WATER ANALYSIS |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| PD ISO/TR 12134:2010 | Rubber. Estimation of uncertainty for test methods. Non-functional parameters |
| BS EN 15297:2011 | Solid biofuels. Determination of minor elements. As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| BS EN ISO 16968:2015 | Solid biofuels. Determination of minor elements |
| UNI ISO/TS 21749 : 2009 | MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS |
| 08/30193653 DC : 0 | BS ISO 17123-1 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 1: THEORY |
| I.S. EN ISO 16967:2015 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI (ISO 16967:2015) |
| 08/30163829 DC : DRAFT JAN 2008 | BS EN 1076 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| 08/30099651 DC : DRAFT OCT 2008 | BS ISO 16900-1 - RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST AND TEST EQUIPMENT - PART 1: DETERMINATION OF INWARD LEAKAGE |
| 10/30219390 DC : 0 | BS EN 15105 - SOLID BIOFUELS - DETERMINATION OF THE WATER-SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| DIN EN 1076:2010-04 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| UNE-EN 15289:2011 | Solid biofuels - Determination of total content of sulfur and chlorine |
| BS EN 13890:2009 | Workplace exposure. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods |
| I.S. EN 13890:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| UNI EN 838 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| DIN ISO 17123-1:2016-02 (Draft) | OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 1: THEORY (ISO 17123-1:2014) |
| BS EN 15289:2011 | Solid biofuels. Determination of total content of sulfur and chlorine |
| BS EN ISO 14644-9:2012 | Cleanrooms and associated controlled environments Classification of surface cleanliness by particle concentration |
| DIN EN 15105:2011-04 | SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| 08/30099661 DC : DRAFT FEB 2008 | BS ISO 16900-2 - RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST AND TEST EQUIPMENT - PART 2: DETERMINATION OF BREATHING RESISTANCE |
| 08/30172873 DC : DRAFT JULY 2008 | BS EN 838 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| DD ISO/TS 19036 : 2006 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GUIDELINES FOR THE ESTIMATION OF MEASUREMENT UNCERTAINTY FOR QUANTITATIVE DETERMINATIONS |
| 08/30099655 DC : DRAFT OCT 2008 | BS ISO 16900-3 - RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST AND TEST EQUIPMENT - PART 3: DETERMINATION OF PARTICLE FILTER PENETRATION |
| 13/30275861 DC : 0 | BS EN ISO 16968 - SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS |
| I.S. EN ISO 16968:2015 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS (ISO 16968:2015) |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| 13/30275855 DC : 0 | BS EN ISO 16948 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN |
| PD 6461-4:2004 | General metrology Practical guide to measurement uncertainty |
| BS EN ISO 16967:2015 | Solid biofuels. Determination of major elements. Al, Ca, Fe, Mg, P, K, Si, Na and Ti |
| DIN EN 15104:2011-04 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| 08/30133935 DC : DRAFT APR 2008 | ISO 24173 - MICROBEAM ANALYSIS - GUIDELINES FOR ORIENTATION MEASUREMENT USING ELECTRON BACKSCATTER DIFFRACTION |
| 10/30219393 DC : 0 | BS EN 15290 - SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| UNI 11367 : 2010 | BUILDING ACOUSTICS - ACOUSTIC CLASSIFICATION OF BUILDING UNITS - EVALUATION PROCEDURE AND IN SITU MEASUREMENTS |
| CSA ISO 16994 : 2015 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| I.S. EN ISO 14644-9:2012 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION (ISO 14644-9:2012) |
| I.S. EN 15104:2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| ASTM E 2530 : 2006 | Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps (Withdrawn 2015) |
| UNE 80407:2014 | Metrological control of measuring equipment used in the cement test |
| UNI CEI EN ISO/IEC 17043 : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| UNI EN 15290 : 2011 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| DIN EN 13890:2010-01 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| BS EN 1076:2009 | Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods |
| UNE-EN ISO 16948:2015 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO 16948:2015) |
| UNE-EN 15104:2011 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
| CSA ISO 16948 : 2015 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN |
| EN ISO 16948:2015 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO 16948:2015) |
| UNI EN 1076 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 15105 : 2011 | SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| UNI EN 15289 : 2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| UNI EN 13890 : 2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING METALS AND METALLOIDS IN AIRBORNE PARTICLES - REQUIREMENTS AND TEST METHODS |
| UNI EN 15104 : 2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| 13/30276433 DC : 0 | BS ISO 16995 - SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CONTENT OF CHLORIDE, SODIUM AND POTASSIUM |
| DIN EN ISO 14644-9:2012-12 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| DIN EN ISO 16968:2015-09 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS (ISO 16968:2015) |
| BS EN ISO 16948:2015 | Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen |
| 13/30275858 DC : 0 | BS EN ISO 16967 - SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS |
| BS ISO 5667-20:2008 | Water quality. Sampling Guidance on the use of sampling data for decision making. Compliance with thresholds and classification systems |
| BS EN ISO 21258:2010 | Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide (N2O). Reference method. Non-dispersive infrared method |
| 13/30277477 DC : 0 | BS EN ISO 16994 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE |
| UNE-EN 15297:2011 | Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| 08/30190157 DC : DRAFT SEP 2008 | BS EN ISO 14644-9 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE PARTICLE CLEANLINESS |
| DIN EN 15289:2011-04 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| DIN EN 15290:2011-04 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| UNI TR 11326 : 2009 | Acoustics - Evaluation of the uncertainty of measurements and calculations in acoustics - Parte 1: General concepts |
| I.S. EN ISO 16948:2015 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN (ISO 16948:2015) |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| I.S. EN ISO 21258:2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD |
| UNI EN ISO 14644-9 : 2012 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION |
| PREN 482 : DRAFT 2010 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
| I.S. EN 15105:2011 | SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| ISO/TR 12134:2010 | Rubber — Estimation of uncertainty for test methods — Non-functional parameters |
| I.S. EN ISO/IEC 17043:2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| DIN EN 838:2010-05 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| UNE-EN 15105:2011 | Solid biofuels - Determination of the water soluble chloride, sodium and potassium content |
| ISO 16948:2015 | Solid biofuels Determination of total content of carbon, hydrogen and nitrogen |
| BS EN ISO 20988:2007 | Air quality. Guidelines for estimating measurement uncertainty |
| ISO 14644-9:2012 | Cleanrooms and associated controlled environments Part 9: Classification of surface cleanliness by particle concentration |
| ISO 16968:2015 | Solid biofuels Determination of minor elements |
| ISO 21258:2010 | Stationary source emissions — Determination of the mass concentration of dinitrogen monoxide (N2O) — Reference method: Non-dispersive infrared method |
| BS EN 838:2010 | Workplace exposure. Procedures for measuring gases and vapours using diffusive samplers. Requirements and test methods |
| ISO 20988:2007 | Air quality Guidelines for estimating measurement uncertainty |
| I.S. EN 1076:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO/IEC 17043:2010-05 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN ISO 21258:2010 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| EN ISO 16968:2015 | Solid biofuels - Determination of minor elements (ISO 16968:2015) |
| EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN ISO 14644-9:2012 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| EN ISO 20988:2007 | Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007) |
| EN ISO 16967:2015 | Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti (ISO 16967:2015) |
| EN 838:2010 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| NF ISO 16900-4 : 2012 | RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST AND TEST EQUIPMENT - PART 4: DETERMINATION OF GAS FILTER CAPACITY AND MIGRATION, DESORPTION AND CARBON MONOXIDE DYNAMIC TESTING |
| BS EN ISO/IEC 17043:2010 | Conformity assessment. General requirements for proficiency testing |
| DIN EN ISO 21258:2010-11 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N<(Index)2>O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| UNE-EN ISO 16967:2015 | Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti (ISO 16967:2015) |
| BS EN 15104:2011 | Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods |
| UNE-EN ISO 21258:2010 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| DD ISO/TS 21749:2005 | Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments |
| 10/30219387 DC : 0 | BS EN 15289 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| UNE-EN ISO 16968:2015 | Solid biofuels - Determination of minor elements (ISO 16968:2015) |
| CEI UNI EN ISO/IEC 17043 : 2011 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| DIN EN ISO 16967:2015-07 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI (ISO 16967:2015) |
| UNI EN 15297 : 2011 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| I.S. EN 15290:2011 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| ISO 16900-4:2011 | Respiratory protective devices — Methods of test and test equipment — Part 4: Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing |
| ISO/TS 19036:2006 | Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative determinations |
| I.S. EN 15289:2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| CSA ISO 16967 : 2015 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| ISO/TS 13530:2009 | Water quality — Guidance on analytical quality control for chemical and physicochemical water analysis |
| ISO 16967:2015 | Solid biofuels Determination of major elements Al, Ca, Fe, Mg, P, K, Si, Na and Ti |
| DIN EN ISO 20988:2007-09 | AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY |
| EN 15289:2011 | Solid biofuels - Determination of total content of sulfur and chlorine |
| EN 15104:2011 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
| EN 15105:2011 | Solid biofuels - Determination of the water soluble chloride, sodium and potassium content |
| DIN EN ISO 16948:2015-09 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO 16948:2015) |
| ASME PTC46 : 2015 | PERFORMANCE TEST CODES - OVERALL PLANT PERFORMANCE |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| FD X07 021 : 99 FD | FUNDAMENTAL STANDARDS - METROLOGY AND APPLICATION OF THE STATISTICS - HELP TO THE PROCESS FOR THE ESTIMATION AND THE USE OF THE MEASUREMENT AND TEST RESULTS UNCERTAINTY |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 3534-3:2013 | Statistics — Vocabulary and symbols — Part 3: Design of experiments |
| ISO/IEC Guide 43-2:1997 | Proficiency testing by interlaboratory comparisons Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies |
| ISO/TR 7871:1997 | Cumulative sum charts Guidance on quality control and data analysis using CUSUM techniques |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.