ISO/TR 9272:2005
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Rubber and rubber products Determination of precision for test method standards
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
03-09-2019
Language(s)
English, Russian
Published date
08-05-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/TR 9272:2005 presents guidelines for determining, by means of interlaboratory test programmes (ITPs), precision for test method standards used in the rubber manufacturing and the carbon black industries. It uses the basic one-way analysis of variance calculation algorithms of ISO 5725 and as many of the terms and definitions of ISO 5725 as possible that do not conflict with the past history and procedures for precision determination in these two industries. Although bias is not determined in this Technical Report, it is an essential concept in understanding precision determination. The ISO 5725 concepts of accuracy and trueness are not determined in this Technical Report.
Two precision determination methods are given that are described as 'robust' statistical procedures that attempt to eliminate or substantially decrease the influence of outliers. The first is a 'level 1 precision' procedure intended for all test methods in the rubber manufacturing industry and the second is a specific variation of the general precision procedure, designated 'level 2 precision', that applies to carbon black testing. Both of these use the same uniform level experimental design and the Mandel h and k statistics to review the precision database for potential outliers. However, they use slight modifications in the procedure for rejecting incompatible data values as outliers. The 'level 2 precision' procedure is specific as to the number of replicates per database cell or material-laboratory combination.
| DocumentType |
Technical Report
|
| Pages |
78
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| NEN NPR ISO/TR 9272 : 2005 | Identical |
| BS ISO 14932:2012 | Rubber compounding ingredients. Organic vulcanizing agents. Determination of organic peroxide content |
| ISO 8942:2010 | Rubber compounding ingredients Carbon black Determination of individual pellet crushing strength |
| 12/30255141 DC : 0 | BS ISO 17278 - RUBBER, RAW NATURAL - DETERMINATION OF GEL CONTENT OF TECHNICALLY SPECIFIED RUBBER (TSR) |
| BS ISO 1658:2015 | Natural rubber (NR). Evaluation procedure |
| 08/30166267 DC : DRAFT MAY 2008 | BS ISO 2006-2 - RUBBER LATEX, SYNTHETIC - PART 2: DETERMINATION OF HIGH LOAD/MODERATE-SPEED MECHANICAL STABILITY |
| BS ISO 1652:2011 | Rubber latex. Determination of apparent viscosity by the Brookfield test method |
| BS ISO 289-2:2016 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of pre-vulcanization characteristics |
| BS ISO 4662:2017 | Rubber, vulcanized or thermoplastic. Determination of rebound resilience |
| BS ISO 11852:2017 | Rubber. Determination of magnesium content of field natural rubber latex by titration |
| ISO 13145:2012 | Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer |
| ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
| BS ISO 9924-3:2009 | Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction |
| BS ISO 289-1:2015 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of Mooney viscosity |
| 07/30164024 DC : 0 | BS ISO 23233 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF RESISTANCE TO ABRASION USING A DRIVEN, VERTICAL ABRASIVE DISC |
| DIN ISO 706:2006-03 | Rubber latex - Determination of coagulum content (sieve residue) (ISO 706:2004) |
| BS ISO 706:2004 | Rubber latex. Determination of coagulum content (sieve residue) |
| 12/30263490 DC : 0 | BS ISO 16565 - RUBBER - DETERMINATION OF 5-ETHYLIDENENORBORNENE (ENB) OR DICYCLOPENTADIENE (DCPD) IN ETHYLENE-PROPYLENE-DIENE (EPDM) TERPOLYMERS |
| ISO 19043:2015 | Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method |
| 17/30357593 DC : 0 | BS ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT-STRESS FLEXOMETER |
| BS ISO 19984-3:2017 | Rubber and rubber products. Determination of biobased content Biobased mass content |
| 13/30265630 DC : 0 | BS ISO 2322 - STYRENE-BUTADIENE RUBBER (SBR) - EMULSION- AND SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
| 14/30206260 DC : 0 | BS ISO 15825 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF AGGREGATE SIZE DISTRIBUTION BY DISC CENTRIFUGE PHOTOSEDIMENTOMETRY |
| BS ISO 21561-1:2015 | Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR <sup>1</sup>H-NMR and IR with cast-film method |
| UNE-ISO 15671:2015 | Rubber and rubber additives. Determination of total sulfur content using a automatic analyser |
| 07/30148751 DC : 0 | BS ISO 2439 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
| BS ISO 1437:2017 | Rubber compounding ingredients. Carbon black. Determination of sieve residue |
| BS ISO 11344:2016 | Rubber, raw synthetic. Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography |
| 16/30335323 DC : 0 | BS ISO 1437 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF SIEVE RESIDUE |
| ISO 3858:2008 | Rubber compounding ingredients Carbon black Determination of light transmittance of toluene extract |
| BS ISO 1817:2015 | Rubber, vulcanized or thermoplastic. Determination of the effect of liquids |
| BS ISO 21561 : 2005 | STYRENE-BUTADIENE RUBBER (SBR) - DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR |
| BS ISO 37:2017 | Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties |
| BS ISO 9924-1:2000 | Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers |
| 07/30148747 DC : 0 | EN ISO 8067 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TEAR STRENGTH |
| ISO 14932:2012 | Rubber compounding ingredients — Organic vulcanizing agents — Determination of organic peroxide content |
| BS ISO 17403:2014 | Rubber. Determination of magnesium content of field and concentrated natural rubber latices by titration (cyanide-free method) |
| 17/30355057 DC : 0 | BS ISO 2781 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY |
| 16/30343609 DC : 0 | BS ISO 22768 - RUBBER, RAW - DETERMINATION OF THE GLASS TRANSITION TEMPERATURE BY DIFFERENTIAL SCANNING CALORIMETRY (DSC) |
| 09/30180963 DC : 0 | BS ISO 11852 - RUBBER - DETERMINATION OF MAGNESIUM CONTENT OF FIELD AND CONCENTRATED NATURAL RUBBER LATEX BY TITRATION |
| NF ISO 3384 : 2006 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| BS ISO 126:2005 | Natural rubber latex concentrate. Determination of dry rubber content |
| 15/30318244 DC : 0 | BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| BS ISO 1304:2016 | Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number |
| BS ISO 2302:2014 | Isobutene-isoprene rubber (IIR). Evaluation procedure |
| BS ISO 22768:2017 | Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
| BS ISO 2475:2011 | Chloroprene rubber (CR). General-purpose types. Evaluation procedure |
| 04/30110197 DC : DRAFT MAR 2004 | BS ISO 1304 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF IODINE ADSORPTION NUMBER |
| 07/30148755 DC : 0 | BS ISO 24999 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF FATIGUE BY CONSTANT STRAIN PROCEDURE |
| 07/30144606 DC : 0 | ISO 2393 - RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANISATION - EQUIPMENT AND PROCEDURES |
| DIN ISO 132:2015-06 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF FLEX CRACKING AND CRACK GROWTH (DE MATTIA) (ISO 132:2011) |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| BS ISO 127:2012 | Rubber, natural latex concentrate. Determination of KOH number |
| ISO 4659:2014 | Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) Evaluation procedure |
| BS ISO 2303:2011 | Isoprene rubber (IR). Non-oil-extended, solution-polymerized types Evaluation procedures |
| UNE-ISO 1407:2012 | Rubber. Determination of solvent extract |
| ISO 17403:2014 | Rubber — Determination of magnesium content of field and concentrated natural rubber latices by titration (cyanide-free method) |
| UNI ISO 1652 : 2012 | RUBBER LATEX - DETERMINATION OF APPARENT VISCOSITY BY THE BROOKFIELD TEST METHOD |
| BS ISO 248-2:2012 | Rubber, raw. Determination of volatile-matter content Thermogravimetric methods using an automatic analyser with an infrared drying unit |
| ISO/TS 16176:2011 | Rubber compounding ingredients Carbon black Determination of the aggregate-size distribution at ultimate dispersion |
| UNI ISO 21461 : 2012 | RUBBER - DETERMINATION OF THE AROMATICITY OF OIL IN VULCANIZED RUBBER COMPOUNDS |
| BS ISO 7781:2017 | Styrene-butadiene rubber, raw. Determination of soap and organic-acid content |
| DIN ISO 11235:2006-07 | RUBBER COMPOUNDING INGREDIENTS - SULFENAMIDE ACCELERATORS - TEST METHODS |
| ONORM EN ISO 7231 : 2010 | POLYMERIC MATERIALS, CELLULAR, FLEXIBLE - DETERMINATION OF AIR FLOW VALUE AT CONSTANT PRESSURE-DROP |
| ISO 15671:2000 | Rubber and rubber additives — Determination of total sulfur content using an automatic analyser |
| BS ISO 1656:2014 | Rubber, raw natural, and rubber latex, natural. Determination of nitrogen content |
| ISO 1656:2014 | Rubber, raw natural, and rubber latex, natural Determination of nitrogen content |
| UNE-ISO 37:2013 | Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties |
| 14/30284712 DC : 0 | BS ISO 2005 - RUBBER LATEX, NATURAL, CONCENTRATE - DETERMINATION OF SLUDGE CONTENT |
| BS ISO 2005:2014 | Rubber latex, natural, concentrate. Determination of sludge content |
| UNI ISO 126 : 2008 | NATURAL RUBBER LATEX CONCENTRATE - DETERMINATION OF DRY RUBBER CONTENT |
| ISO 15825:2017 | Rubber compounding ingredients — Carbon black — Determination of aggregate size distribution by disc centrifuge photosedimentometry |
| UNI ISO 124 : 2014 | LATEX, RUBBER - DETERMINATION OF TOTAL SOLIDS CONTENT |
| 16/30334939 DC : 0 | BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE) |
| 16/30334942 DC : 0 | BS ISO 23337 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ABRASION RESISTANCE USING THE IMPROVED LAMBOURN TEST MACHINE |
| ISO 16565:2013 | Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers |
| UNI ISO 5435 : 2009 | RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF TINTING STRENGTH |
| BS ISO 248-1:2011 | Rubber, raw. Determination of volatile-matter content Hot-mill method and oven method |
| 16/30313049 DC : 0 | BS ISO 19984-2 - RUBBER AND RUBBER PRODUCTS - DETERMINATION OF BIOBASED CONTENT - PART 2: BIOBASED CARBON CONTENT |
| 14/30255646 DC : 0 | BS ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE |
| BS ISO 2930:2017 | Rubber, raw natural. Determination of plasticity retention index (PRI) |
| BS ISO 6101-3:2014 | Rubber. Determination of metal content by atomic absorption spectrometry Determination of copper content |
| 14/30304385 DC : 0 | BS ISO 34-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 2: SMALL (DELFT) TEST PIECES |
| ISO 4658:1999 | Acrylonitrile-butadiene rubber (NBR) Evaluation procedure |
| ISO 12965:2000 | Butadiene rubber Determination of microstructure by infra-red spectrometry |
| 09/30193376 DC : 0 | BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
| BS ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness) |
| ISO 17052:2007 | Rubber, raw Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography Thermal desorption (dynamic headspace) method |
| DIN ISO 125:2014-11 | NATURAL RUBBER LATEX CONCENTRATE - DETERMINATION OF ALKALINITY (ISO 125:2011) |
| BS ISO 28343:2010 | Rubber compounding ingredients. Process oils. Determination of glass transition temperature by DSC |
| UNI ISO 17052 : 2014 | RUBBER, RAW - DETERMINATION OF RESIDUAL MONOMERS AND OTHER VOLATILE LOW-MOLECULAR-MASS COMPOUNDS BY CAPILLARY GAS CHROMATOGRAPHY - THERMAL DESORPTION (DYNAMIC HEADSPACE) METHOD |
| ISO 5435:2017 | Rubber compounding ingredients — Carbon black — Determination of tinting strength |
| UNE-ISO 3384-1:2017 | Rubber, vulcanize or thermoplastic. Determination of stress relaxation in compression. Part 1: Testing at constant temperature |
| 13/30280254 DC : 0 | BS ISO 249 - RUBBER, RAW NATURAL - DETERMINATION OF DIRT CONTENT |
| BS ISO 4097:2014 | Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure |
| 07/30090853 DC : 0 | BS ISO 1658 - NATURAL RUBBER (NR) - EVALUATION PROCEDURE |
| BS 903-A3.3.2(1997) : 1997 | PHYSICAL TESTING OF RUBBER - DETERMINATION OF TEAR STRENGTH - SMALL (DELFT) TEST PIECES |
| ISO 2322:2014 | Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures |
| 07/30158191 DC : DRAFT AUG 2007 | BS ISO 28641 - RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
| 15/30317596 DC : 0 | BS ISO 11852 - RUBBER - DETERMINATION OF MAGNESIUM CONTENT OF FIELD NATURAL RUBBER LATEX BY TITRATION |
| DIN ISO 1652:2013-02 | Rubber latex - Determination of apparent viscosity by the Brookfield test method (ISO 1652:2011) |
| BS ISO 125:2011 | Natural rubber latex concentrate. Determination of alkalinity |
| 15/30314239 DC : 0 | BS ISO 247 - RUBBER - DETERMINATION OF ASH |
| ISO 2303:2011 | Isoprene rubber (IR) Non-oil-extended, solution-polymerized types Evaluation procedures |
| BS ISO 20463:2018 | Rubber and rubber products. Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials |
| 10/30212479 DC : 0 | BS ISO 2475 - CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE |
| BS ISO 2476:2014 | Butadiene rubber (BR). Solution-polymerized types. Evaluation procedures |
| BS 903-2:1997 | Physical testing of rubber Guide to the application of statistics to rubber testing |
| 12/30261825 DC : 0 | BS ISO 815-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT AMBIENT OR ELEVATED TEMPERATURES |
| PD ISO/TS 289-4:2017 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of the Mooney stress-relaxation rate |
| 08/30155570 DC : DRAFT APR 2008 | BS ISO 7231 - POLYMERIC MATERIALS, CELLULAR, FLEXIBLE DETERMINATION OF AIR FLOW VALUE AT CONSTANT PRESSURE-DROP |
| BS ISO 19984-2:2017 | Rubber and rubber products. Determination of biobased content Biobased carbon content |
| 08/30166566 DC : DRAFT MAY 2008 | BS ISO 8942 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF INDIVIDUAL PELLET CRUSHING STRENGTH |
| BS ISO 815-1:2014 | Rubber, vulcanized or thermoplastic. Determination of compression set At ambient or elevated temperatures |
| ISO 2302:2014 | Isobutene-isoprene rubber (IIR) Evaluation procedure |
| UNE-ISO 127:2017 | Rubber, natural latex concéntrate. Determination of KOH number |
| ISO 4666-3:2016 | Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type) |
| BS ISO 3858:2008 | Rubber compounding ingredients. Carbon black. Determination of light transmittance of toluene extract |
| ISO 3384-1:2011 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature |
| ISO 4662:2017 | Rubber, vulcanized or thermoplastic Determination of rebound resilience |
| BS ISO 3384-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| ISO 6101-4:2014 | Rubber Determination of metal content by atomic absorption spectrometry Part 4: Determination of manganese content |
| ISO 4097:2014 | Rubber, ethylene-propylene-diene (EPDM) Evaluation procedure |
| ISO 248-2:2012 | Rubber, raw Determination of volatile-matter content Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit |
| ISO 2005:2014 | Rubber latex, natural, concentrate — Determination of sludge content |
| ISO 1407:2011 | Rubber — Determination of solvent extract |
| ISO 2476:2014 | Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures |
| ISO 289-2:2016 | Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 2: Determination of pre-vulcanization characteristics |
| ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
| UNE-ISO 289-1:2018 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Part 1: Determination of Mooney viscosity |
| ISO 11344:2016 | Rubber, raw synthetic Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography |
| BS ISO 16565:2013 | Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylenepropylene-diene (EPDM) terpolymers |
| ISO 14285:2014 | Rubber and plastics gloves for food services — Limits for extractable substances |
| ISO 249:2016 | Rubber, raw natural Determination of dirt content |
| ISO 289-1:2015 | Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 1: Determination of Mooney viscosity |
| BS EN ISO 7231:2010 | Polymeric materials, cellular, flexible. Determination of air flow value at constant pressure-drop |
| DIN EN ISO 21171:2006-08 | Medical gloves - Determination of removable surface powder (ISO 21171:2006) |
| I.S. EN ISO 2439:2009 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
| DIN EN ISO 7231:2010-12 | Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop (ISO 7231:2010) |
| DIN ISO 815:2000-03 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET AT AMBIENT, ELEVATED OR LOW TEMPERATURES |
| I.S. EN ISO 7231:2010 | POLYMERIC MATERIALS, CELLULAR, FLEXIBLE - DETERMINATION OF AIR FLOW VALUE AT CONSTANT PRESSURE-DROP |
| I.S. EN ISO 3385:2014 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF FATIGUE BY CONSTANT-LOAD POUNDING (ISO 3385:2014) |
| I.S. EN ISO 1798:2008 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
| BS 903-0:2003 | Physical testing of rubber General |
| BS 5293-7(2001) : 2001 | SAMPLING AND TESTING CARBON BLACK FOR USE IN THE RUBBER INDUSTRY - METHOD FOR DETERMINATION OF ASH CONTENT |
| BS 7164-21:1996 | Chemical tests for raw and vulcanized rubber Determination of nitrogen content |
| BS 6995:1997 | Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types) |
| BS 7164-8:1996 | Chemical tests for raw and vulcanized rubber Method for determination of dirt content of raw natural rubber |
| BS 903-A3:1995 | Physical testing of rubber Method for determination of tear strength (trouser, angle and crescent test pieces) |
| BS 6057-3.5:1996 | Rubber latices. Methods of test Determination of KOH number of natural rubber latices |
| BS 6057-3.2:1997 | Rubber latices. Methods of test Determination of total solids content of rubber latices |
| BS 5293-10:2001 | Sampling and testing carbon black for use in the rubber industry Method for determination of iodine absorption number |
| BS 6057-3.9:1996 | Rubber latices. Methods of test Determination of pH |
| BS 5047:1997 | Method for evaluation of solution-polymerized types of butadiene rubber (BR) |
| BS 903-A26:1995 | Physical testing of rubber Method for determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| BS 6057-3.13:1993 | Rubber latices. Methods of test Determination of sludge content |
| BS 903-0:2012 | Physical testing of rubber General |
| DIN ISO 126:2008-06 | NATURAL RUBBER LATEX CONCENTRATE - DETERMINATION OF DRY RUBBER CONTENT |
| BS ISO 132:2011 | Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia) |
| BS ISO 21561-2:2016 | Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR FTIR with ATR method |
| 06/30150431 DC : DRAFT MAY 2006 | ISO 4097 - RUBBER, ETHYLENE-PROPYLENE-DIENE (EPDM) - EVALUATION PROCEDURE |
| 13/30269216 DC : 0 | BS ISO 124 - LATEX, RUBBER - DETERMINATION OF TOTAL SOLIDS CONTENT |
| 16/30335287 DC : 0 | BS ISO 15825 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF AGGREGATE SIZE DISTRIBUTION BY DISC CENTRIFUGE PHOTOSEDIMENTOMETRY |
| BS ISO 249:2014 | Rubber, raw natural. Determination of dirt content |
| BS ISO 7270-2:2012 | Rubber. Analysis by pyrolytic gas-chromatographic methods Determination of styrene/butadiene/isoprene ratio |
| BS ISO 2322:2014 | Styrene-butadiene rubber (SBR). Emulsion- and solution-polymerized types. Evaluation procedures |
| 14/30288446 DC : 0 | BS ISO 11344 - RUBBER, RAW SYNTHETIC - DETERMINATION OF THE MOLECULAR-MASS DISTRIBUTION OF SOLUTION POLYMERS BY GEL PERMEATION CHROMATOGRAPHY |
| 03/307996 DC : DRAFT MAY 2003 | ISO 11344 - RUBBER, RAW SYNTHETIC - DETERMINATION OF THE MOLECULAR MASS DISTRIBUTION OF SOLUTION POLYMERS BY GEL PERMEATION CHROMATOGRAPHY |
| 15/30318226 DC : 0 | BS ISO 289-2 - RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 2: DETERMINATION OF PRE-VULCANIZATION CHARACTERISTICS |
| 17/30335356 DC : DRAFT MAY 2017 | BS ISO 28641 - RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
| 10/30218417 DC : 0 | BS ISO 1652:2004/AMD1 - RUBBER LATEX - DETERMINATION OF APPARENT VISCOSITY BY THE BROOKFIELD TEST METHOD |
| 14/30304382 DC : 0 | BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
| UNE-ISO 34-2:2011 | Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces |
| 08/30167237 DC : DRAFT FEB 2008 | BS ISO 1407 - RUBBER - DETERMINATION OF SOLVENT EXTRACT |
| BS ISO 11235:2016 | Rubber compounding ingredients. Sulfenamide accelerators. Test methods |
| 16/30318232 DC : 0 | BS ISO 4662 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF REBOUND RESILIENCE |
| 10/30212482 DC : 0 | BS ISO 4658 - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - EVALUATION PROCEDURE |
| BS ISO 17564:2008 | Raw hydrogenated nitrile rubber (HNBR). Determination of residual unsaturation by iodine value |
| 04/30115588 DC : DRAFT JUN 2004 | ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST |
| ISO 4656:2012 | Rubber compounding ingredients — Carbon black — Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) |
| 14/30302222 DC : 0 | BS ISO 21561-1 - STYRENE-BUTADIENE RUBBER (SBR) - DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR - PART 1: 1H-NMR AND IR METHOD |
| 14/30295541 DC : 0 | BS ISO 4659 - STYRENE-BUTADIENE RUBBER (CARBON BLACK OR CARBON BLACK AND OIL MASTERBATCHES) - EVALUATION PROCEDURE |
| BS ISO 6101-4:2014 | Rubber. Determination of metal content by atomic absorption spectrometry Determination of manganese content |
| 15/30317717 DC : 0 | BS ISO 1304 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF IODINE ADSORPTION NUMBER |
| 07/30164724 DC : 0 | ISO 5435 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF TINTING STRENGTH |
| UNE-ISO 2393:2013 | Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
| 10/30196860 DC : 0 | BS ISO 1407 - RUBBER - DETERMINATION OF SOLVENT EXTRACT |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 21561-2:2016 | Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR — Part 2: FTIR with ATR method |
| BS ISO 7743:2017 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
| 08/30176630 DC : DRAFT JAN 2008 | BS ISO 2322 - STYRENE-BUTADIENE RUBBER (SBR) - EMULSION AND SOLUTION POLYMERIZED TYPES - EVALUATION PROCEDURES |
| ISO 34-2:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
| 08/30182133 DC : DRAFT MAY 2008 | BS ISO 2006-1 - RUBBER LATEX, SYNTHETIC - DETERMINATION OF MECHANICAL STABILITY - PART 1: HIGH-SPEED METHOD |
| BS ISO 7663:2014 | Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures |
| BS ISO 23337:2016 | Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using the Improved Lambourn test machine |
| 14/30295544 DC : 0 | BS ISO 7663 - HALOGENATED ISOBUTENE-ISOPRENE RUBBER (BIIR AND CIIR) - EVALUATION PROCEDURES |
| 11/30244786 DC : 0 | BS ISO 21461 - RUBBER - DETERMINATION OF THE AROMATICITY OF OIL IN VULCANIZED RUBBER COMPOUNDS |
| UNI ISO 1407 : 2012 | RUBBER - DETERMINATION OF SOLVENT EXTRACT |
| ISO 2006-1:2009 | Rubber latex, synthetic — Determination of mechanical stability — Part 1: High-speed method |
| UNI ISO 8942 : 2014 | RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF INDIVIDUAL PELLET CRUSHING STRENGTH |
| DIN ISO 34-1:2016-09 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES (ISO 34-1:2015) |
| ISO/TS 289-4:2017 | Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate |
| UNI ISO 3858 : 2009 | RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF LIGHT TRANSMITTANCE OF TOLUENE EXTRACT |
| ISO 248-1:2011 | Rubber, raw Determination of volatile-matter content Part 1: Hot-mill method and oven method |
| ISO 24999:2008 | Flexible cellular polymeric materials Determination of fatigue by a constant-strain procedure |
| UNI ISO 7619-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
| UNE-ISO 125:2012 | Natural rubber latex concentrate. Determination of alkalinity |
| ISO 17564:2008 | Raw hydrogenated nitrile rubber (HNBR) Determination of residual unsaturation by iodine value |
| UNI ISO 2303 : 2012 | ISOPRENE RUBBER (IR) - NON-OIL-EXTENDED, SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
| ISO 248:2005 | Rubber, raw Determination of volatile-matter content |
| UNI ISO 3384-1 : 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| BIS IS 3708-1 : 2013 | METHODS OF TEST FOR NATURAL RUBBER LATEX - PART 1: DETERMINATION OF DRY RUBBER CONTENT |
| UNI ISO 7743 : 2012 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
| UNI ISO 2006-1 : 2009 | RUBBER LATEX, SYNTHETIC - DETERMINATION OF MECHANICAL STABILITY - PART 1: HIGH- SPEED METHOD |
| UNI ISO 4656 : 2008 | RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF OIL ABSORPTION NUMBER (OAN) AND OIL ABSORPTION NUMBER OF COMPRESSED SAMPLE (COAN) |
| ISO 22768:2017 | Rubber, raw Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
| ISO 125:2011 | Natural rubber latex concentrate Determination of alkalinity |
| ISO 11235:2016 | Rubber compounding ingredients — Sulfenamide accelerators — Test methods |
| ISO 21561:2005 | Styrene-butadiene rubber (SBR) Determination of the microstructure of solution-polymerized SBR |
| ISO 7663:2014 | Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures |
| BS EN ISO 21171:2006 | Medical gloves. Determination of removable surface powder |
| ISO 1798:2008 | Flexible cellular polymeric materials Determination of tensile strength and elongation at break |
| ISO 21171:2006 | Medical gloves — Determination of removable surface powder |
| UNI EN ISO 3385 : 2014 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF FATIGUE BY CONSTANT-LOAD POUNDING |
| UNI EN ISO 7231 : 2010 | POLYMERIC MATERIALS, CELLULAR, FLEXIBLE - DETERMINATION OF AIR FLOW VALUE AT CONSTANT PRESSURE-DROP |
| UNI EN ISO 2439 : 2009 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
| UNI EN ISO 1798 : 2008 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
| UNE-ISO 248-1:2013 | Rubber, raw — Determination of volatile-matter content — Part 1: Hot-mill method and oven method |
| UNE-ISO 7619-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness) |
| UNI ISO 2393 : 2014 | RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANIZATION - EQUIPMENT AND PROCEDURES |
| BS ISO 34-2:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces |
| DIN ISO 48:2016-09 | Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010) |
| UNI ISO 3384 : 2009 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| 17/30355137 DC : 0 | BS ISO 5435 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF TINTING STRENGTH |
| 16/30317723 DC : 0 | BS ISO 2930 - RUBBER, RAW NATURAL - DETERMINATION OF PLASTICITY RETENTION INDEX (PRI) |
| BS ISO 15825:2017 | Rubber compounding ingredients. Carbon black. Determination of aggregate size distribution by disc centrifuge photosedimentometry |
| UNI ISO 127 : 2012 | RUBBER, NATURAL LATEX CONCENTRATE - DETERMINATION OF KOH NUMBER |
| BS ISO 19043:2015 | Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method |
| ISO 1652:2011 | Rubber latex Determination of apparent viscosity by the Brookfield test method |
| ISO 8332:2011 | Rubber compounding ingredients Sulfur Methods of test |
| 06/30150629 DC : DRAFT MAY 2006 | BS ISO 6452 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF FOGGING CHARACTERISTICS OF TRIM MATERIALS IN THE INTERIOR OF AUTOMOBILES |
| 11/30244285 DC : 0 | BS 903-0:2011 - PHYSICAL TESTING OF RUBBER - PART 0 - GENERAL |
| 13/30276463 DC : 0 | BS ISO 289-1 - RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY |
| ISO 812:2017 | Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness |
| BS ISO 35:2004 | Natural rubber latex concentrate. Determination of mechanical stability |
| UNI ISO 2322 : 2014 | STYRENE-BUTADIENE RUBBER (SBR) - EMULSION- AND SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
| UNI ISO 188 : 2012 | RUBBER, VULCANIZED OR THERMOPLASTIC - ACCELERATED AGEING AND HEAT RESISTANCE TESTS |
| 13/30280263 DC : 0 | BS ISO 1656 - RUBBER, RAW NATURAL, AND RUBBER LATEX, NATURAL - DETERMINATION OF NITROGEN CONTENT |
| ISO 2930:2017 | Rubber, raw natural — Determination of plasticity retention index (PRI) |
| BS ISO 976:2013 | Rubber and plastics. Polymer dispersions and rubber lattices. Determination of pH |
| ISO 9924-3:2009 | Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction |
| DD ISO/TS 16176:2011 | Rubber compounding ingredients. Carbon black. Determination of the aggregate-size distribution at ultimate dispersion |
| 17/30337340 DC : 0 | BS ISO 20463 - RUBBER AND RUBBER PRODUCTS - DETERMINATION OF COMBUSTION ENERGY AND CARBON DIOXIDE EMISSION FROM BIOBASED AND NONBIOBASED MATERIALS |
| ISO 1437:2017 | Rubber compounding ingredients — Carbon black — Determination of sieve residue |
| BS ISO 21461:2012 | Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds |
| UNI ISO 48 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD) |
| BS ISO 4666-3:2016 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Compression flexometer (constant-strain type) |
| BS ISO 12243 : 2003 | MEDICAL GLOVES MADE FROM NATURAL RUBBER LATEX - DETERMINATION OF WATER-EXTRACTABLE PROTEIN USING THE MODIFIED LOWRY METHOD |
| BS ISO 248:2005 | Rubber, raw. Determination of volatile-matter content |
| ISO 19004:2004 | Rubber and rubber products Determination of the sensitivity of test methods |
| BS ISO 11236:2017 | Rubber compounding ingredients. <i>p</i>-Phenylenediamine antidegradants (PPDs). Test methods |
| UNE-ISO 124:2011 | Latex, rubber -- Determination of total solids content |
| DIN EN 15702:2009-04 | CELLULAR PLASTICS - CELL COUNT PROCEDURE FOR FLEXIBLE AND RIGID POLYURETHANE |
| UNE-ISO 1304:2013 | Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number |
| BS ISO 1407:2011 | Rubber. Determination of solvent extract |
| UNE-ISO 248-2:2013 | Rubber, raw — Determination of volatilematter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit |
| ISO 12243:2003 | Medical gloves made from natural rubber latex — Determination of water-extractable protein using the modified Lowry method |
| BS ISO 4659:2014 | Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure |
| 11/30205364 DC : 0 | BS ISO 13145 - RUBBER - DETERMINATION OF VISCOSITY AND STRESS RELAXATION USING A ROTORLESS, SEALED OSCILLATING-SHEAR RHEOMETER |
| 17/30355090 DC : 0 | BS ISO 6101-6 - RUBBER - DETERMINATION OF METAL CONTENT BY ATOMIC ABSORPTION SPECTROMETRY - PART 6: DETERMINATION OF MAGNESIUM CONTENT |
| 16/30313052 DC : 0 | BS ISO 19984-3 - RUBBER AND RUBBER PRODUCTS - DETERMINATION OF BIOBASED CONTENT - PART 3: BIOBASED MASS CONTENT |
| BS ISO 34-1:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Trouser, angle and crescent test pieces |
| ISO 7270-2:2012 | Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio |
| 10/30212476 DC : 0 | BS ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST |
| 13/30265627 DC : 0 | BS ISO 2393 - RUBBER TEST MIXES - PREPARATION, MIXING AND VULCANIZATION - EQUIPMENT AND PROCEDURES |
| 13/30265633 DC : 0 | BS ISO 2476 - BUTADIENE RUBBER (BR) - SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
| 17/30351848 DC : 0 | BS ISO 7781 - STYRENE-BUTADIENE RUBBER, RAW - DETERMINATION OF SOAP AND ORGANIC-ACID CONTENT |
| BS ISO 8332:2011 | Rubber compounding ingredients. Sulfur. Methods of test |
| BS ISO 4656:2012 | Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) |
| BS ISO 812:2017 | Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness |
| BS ISO 13145:2012 | Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer |
| UNI ISO 125 : 2012 | NATURAL RUBBER LATEX CONCENTRATE - DETERMINATION OF ALKALINITY |
| BS ISO 19242:2015 | Rubber. Determination of total sulfur content by ion chromatography |
| 09/30167033 DC : 0 | |
| BS ISO 19003:2006 | Rubber and rubber products. Guidance on the application of statistics to physical testing |
| DIN ISO 7743:2016-08 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011) |
| UNI ISO 9924-3 : 2010 | RUBBER AND RUBBER PRODUCTS - DETERMINATION OF THE COMPOSITION OF VULCANIZATES AND UNCURED COMPOUNDS BY THERMOGRAVIMETRY - PART 3: HYDROCARBON RUBBERS, HALOGENATED RUBBERS AND POLYSILOXANE RUBBERS AFTER EXTRACTION |
| ISO 19984-2:2017 | Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content |
| ISO 21461:2012 | Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds |
| ISO 28343:2010 | Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC |
| DIN ISO 815-1:2016-09 | Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures (ISO 815-1:2014) |
| UNI ISO 706 : 2009 | RUBBER LATEX - DETERMINATION OF COAGULUM CONTENT (SIEVE RESIDUE) |
| ISO 2393:2014 | Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
| UNE-ISO 34-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces |
| ISO 19983:2017 | Rubber — Determination of precision of test methods |
| ISO 132:2017 | Rubber, vulcanized or thermoplastic Determination of flex cracking and crack growth (De Mattia) |
| ISO 35:2004 | Natural rubber latex concentrate Determination of mechanical stability |
| BS ISO 4666-4:2007 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Constant-stress flexometer |
| ISO 976:2013 | Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH |
| ISO 7781:2017 | Styrene-butadiene rubber, raw — Determination of soap and organic-acid content |
| ISO 706:2004 | Rubber latex — Determination of coagulum content (sieve residue) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 127:2012 | Rubber, natural latex concentrate Determination of KOH number |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| ISO 11236:2017 | Rubber compounding ingredients — p-Phenylenediamine antidegradants (PPDs) — Test methods |
| ISO 6101-3:2014 | Rubber Determination of metal content by atomic absorption spectrometry Part 3: Determination of copper content |
| UNE-EN ISO 7231:2011 | Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop (ISO 7231:2010) |
| DIN EN ISO 2439:2009-05 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
| DIN EN ISO 3385:2014-10 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF FATIGUE BY CONSTANT-LOAD POUNDING (ISO 3385:2014) |
| ISO 2439:2008 | Flexible cellular polymeric materials Determination of hardness (indentation technique) |
| BS EN 12365-4:2003 | Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling Recovery after accelerated ageing test method |
| BS EN ISO 2439:2008 | Flexible cellular polymeric materials. Determination of hardness (indentation technique) |
| ISO 3384:2005 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures |
| UNE-EN ISO 3385:2014 | Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014) |
| ISO 3385:2014 | Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding |
| BS EN ISO 3385:2014 | Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding |
| UNE-ISO 7743:2016 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
| EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
| EN ISO 7231:2010 | Polymeric materials, cellular, flexible - Determination of air flow value at constant pressure-drop (ISO 7231:2010) |
| EN ISO 3385:2014 | Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding (ISO 3385:2014) |
| EN ISO 21171:2006 | Medical gloves - Determination of removable surface powder (ISO 21171:2006) |
| EN ISO 1798:2008 | Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008) |
| BIS IS 3660-7 : 2013 | METHODS OF TEST FOR NATURAL RUBBER - PART 7: DETERMINATION OF MOONEY VISCOSITY |
| 11/30239316 DC : 0 | BS ISO 127 - RUBBER, NATURAL LATEX CONCENTRATE - DETERMINATION OF KOH NUMBER |
| 11/30239813 DC : 0 | BS ISO 4656:2007/AMD 1 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF OIL ABSORPTION NUMBER (OAN) AND OIL ABSORPTION NUMBER OF COMPRESSED SAMPLE (COAN) |
| BS ISO 14285:2014 | Rubber and plastics gloves for food services. Limits for extractable substances |
| BS ISO 17278:2013 | Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR) |
| BS ISO 4658:1999 | Acrylonitrile-butadiene rubber (NBR). Evaluation procedure |
| 17/30355143 DC : 0 | BS EN ISO 8067 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TEAR STRENGTH |
| BS ISO 15672:2000 | Rubber and rubber additives. Determination of total nitrogen content using an automatic analyser |
| 17/30355134 DC : 0 | BS ISO 3858 - RUBBER COMPOUNDING INGREDIENTS - CARBON BLACK - DETERMINATION OF LIGHT TRANSMITTANCE OF TOLUENE EXTRACT |
| BS ISO 48:2010 | Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 19984-3:2017 | Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content |
| ISO 19003:2006 | Rubber and rubber products — Guidance on the application of statistics to physical testing |
| UNI ISO 2475 : 2012 | CHLOROPRENE RUBBER (CR) - GENERAL-PURPOSE TYPES - EVALUATION PROCEDURE |
| 14/30288439 DC : 0 | BS ISO 1817 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF THE EFFECT OF LIQUIDS |
| BS ISO 12965:2000 | Butadiene rubber. Determination of microstructure by infra-red spectrometry |
| 06/30113809 DC : DRAFT APR 2006 | ISO 4666-4 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RAISE AND RESISTANCE TO FATIGUE IN FLEXOMETER TESTING - PART 4: CONSTANT STRESS FLEXOMETER |
| 08/30166722 DC : DRAFT MAR 2008 | BS ISO 4662 - RUBBER - DETERMINATION OF REBOUND RESILIENCE OF VULCANIZATES |
| BS ISO 2006-2:2009 | Rubber latex, synthetic. Determination of mechanical stability Moderate-speed method under load |
| ISO 2006-2:2009 | Rubber latex, synthetic — Determination of mechanical stability — Part 2: Moderate-speed method under load |
| BS ISO 2393:2014 | Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures |
| BS ISO 1125:2015 | Rubber compounding ingredients. Carbon black. Determination of ash |
| UNE-ISO 4662:2013 | Rubber, vulcanized or thermoplastic — Determination of rebound resilience |
| BS ISO 289-4:2003 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of the Mooney stress-relaxation rate |
| DIN ISO 127:2014-03 | RUBBER, NATURAL LATEX CONCENTRATE - DETERMINATION OF KOH NUMBER (ISO 127:2012) |
| BS ISO 2006-1:2009 | Rubber latex, synthetic. Determination of mechanical stability High-speed method |
| 08/30176627 DC : DRAFT JAN 2008 | BS ISO 2476 - RUBBER, BUTADIENE (BR) - SOLUTION-POLYMERIZED TYPES - EVALUATION PROCEDURES |
| BS ISO 8942:2010 | Rubber compounding ingredients. Carbon black. Determination of individual pellet crushing strength |
| 14/30295538 DC : 0 | BS ISO 2302 - ISOBUTENE-ISOPRENE RUBBER (IIR) - EVALUATION PROCEDURES |
| DIN ISO 3384-1:2015-12 | Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) |
| 16/30335353 DC : 0 | BS ISO 11236 - RUBBER COMPOUNDING INGREDIENTS - P-PHENYLENEDIAMINE (PPD) ANTIDEGRADANTS - TEST METHODS |
| BS ISO 19983:2017 | Rubber. Determination of precision of test methods |
| ISO 1304:2016 | Rubber compounding ingredients Carbon black Determination of iodine adsorption number |
| ISO 126:2005 | Natural rubber latex concentrate — Determination of dry rubber content |
| BS ISO 188:2011 | Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests |
| UNE-ISO 35:2012 | Elastomers. Natural rubber latex. Determination of mechanical stability |
| 15/30291997 DC : 0 | BS ISO 21561-2 - STYRENE-BUTADIENE RUBBER (SBR) - DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR - PART 2: FTIR WITH ATR METHOD |
| 17/30344532 DC : 0 | BS ISO 6502-3 - RUBBER - MEASUREMENT OF VULCANIZATION CHARACTERISTICS USING CUREMETERS - PART 3: ROTORLESS CUREMETER |
| BS ISO 5435:2017 | Rubber compounding ingredients. Carbon black. Determination of tinting strength |
| BS 903-1:1995 | Physical testing of rubber Guide to the selection and use of methods of test for rubber |
| BS ISO 28641:2010 | Rubber compounding ingredients. Organic chemicals. General test methods |
| 09/30184526 DC : DRAFT MAY 2009 | BS ISO 4666-3 - RUBBER, VULCANIZED - DETERMINATION OF TEMPERATURE RISE AND RESISTANCE TO FATIQUE IN FLEXOMETER TESTING - PART 3: COMPRESSION FLEXOMETER (CONSTANT-STRAIN TYPE) |
| 10/30219448 DC : 0 | BS ISO 125:2003/DAMD 1 - NATURAL RUBBER LATEX CONCENTRATE - DETERMINATION OF ALKALINITY |
| 17/30355140 DC : 0 | BS ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST |
| BS ISO 3384:2005 | Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures |
| 04/30110375 DC : DRAFT MAR 2004 | BS ISO 248 - RUBBERS, RAW - DETERMINATION OF VOLATILE MATTER CONTENT |
| 09/30193391 DC : DRAFT MAY 2009 | BS ISO 7619-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS) |
| UNI ISO 976 : 2014 | RUBBER AND PLASTICS - POLYMER DISPERSIONS AND RUBBER LATICES - DETERMINATION OF PH |
| BS ISO 124:2014 | Latex, rubber. Determination of total solids content |
| ISO 11852:2017 | Rubber — Determination of magnesium content of field natural rubber latex by titration |
| BS ISO 15671:2000 | Rubber and rubber additives. Determination of total sulfur content using an automatic analyser |
| BS ISO 6452:2007 | Rubber- or plastics-coated fabrics. Determination of fogging characteristics of trim materials in the interior of automobiles |
| UNE-ISO 706:2012 | Rubber latex. Determination of coagulum content (sieve residue) |
| UNE-ISO 4656:2013 | Rubber compounding ingredients — Carbon black — Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) |
| ISO 7743:2017 | Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
| DIN ISO 35:2008-06 | Natural rubber latex concentrate - Determination of mechanical stability (ISO 35:2004 + Amd. 1:2006) |
| UNE-ISO 126:2013 | Natural rubber latex concentrate — Determination of dry rubber content |
| ISO 1125:2015 | Rubber compounding ingredients Carbon black Determination of ash |
| ISO 1658:2015 | Natural rubber (NR) Evaluation procedure |
| ISO 19242:2015 | Rubber Determination of total sulfur content by ion chromatography |
| UNI ISO 248-1 : 2012 | RUBBER, RAW - DETERMINATION OF VOLATILE-MATTER CONTENT - PART 1: HOT-MILL METHOD AND OVEN METHOD |
| ISO 17278:2013 | Rubber, raw natural Determination of the gel content of technically specified rubber (TSR) |
| UNE-ISO 815-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures |
| UNE-ISO 976:2017 | Rubber and plastics. Polymer dispersions and rubber lattices. Determination of pH |
| ISO 20463:2018 | Rubber and rubber products — Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials |
| ISO 2475:2011 | Chloroprene rubber (CR) — General-purpose types — Evaluation procedure |
| ISO 6452:2007 | Rubber- or plastics-coated fabrics Determination of fogging characteristics of trim materials in the interior of automobiles |
| ISO 4666-4:2007 | Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 4: Constant-stress flexometer |
| ISO 23337:2016 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine |
| ISO 21561-1:2015 | Styrene-butadiene rubber (SBR) Determination of the microstructure of solution-polymerized SBR Part 1: 1H-NMR and IR with cast-film method |
| ISO 124:2014 | Latex, rubber — Determination of total solids content |
| ISO 28641:2010 | Rubber compounding ingredients Organic chemicals General test methods |
| ISO 9924-1:2016 | Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers |
| ISO 289-4:2003 | Rubber, unvulcanized Determinations using a shearing-disc viscometer Part 4: Determination of the Mooney stress-relaxation rate |
| ISO 7231:2010 | Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop |
| BS EN ISO 1798:2008 | Flexible cellular polymeric materials. Determination of tensile strength and elongation at break |
| DIN EN ISO 1798:2008-04 | Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008) |
| EN 12365-4:2003 | Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 4: Recovery after accelerated ageing test method |
| DIN ISO 3384:2008-07 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| ISO 289:1985 | Rubber, unvulcanized Determination of Mooney viscosity |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.