ISO/TR 17243-1:2014
Current
The latest, up-to-date edition.
Machine tool spindles Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
11-20-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/TR 17243-1: 2014 provides information on how to assess the severity of machine tool spindle vibrations measured on the spindle housing. The vibration criteria provided in this part of ISO/TR 17243 apply to spindles with integral drive intended for stationary machine tools with nominal operating speeds between 600 min1 and 30 000 min1. This part of ISO/TR 17243 only applies to spindles with rolling element bearing types.
ISO/TR 17243-1: 2014 applies to spindles assembled on metal cutting machine tools.
ISO/TR 17243-1: 2014 is applicable for testing, periodic verification, and continuous monitoring.
Spindles with bearing types other than rolling element bearings are excluded from this part of ISO/TR 17243.
ISO/TR 17243-1: 2014 does not address geometrical accuracy of axes of rotation (see ISO 2307).
ISO/TR 17243-1: 2014 does not address unacceptable cutting performance with regards to surface finish and accuracy.
ISO/TR 17243-1: 2014 does not address vibration severity issues of machine tool spindles operating at speeds below 600 min1 or exceeding 30 000 min1 due to lack of supporting vibration data and limitations in many vibration measurement instruments. Also, due to lack of data, machine tool spindles with bearing types other than rolling element bearings are excluded from this part of ISO/TR 17243.
ISO/TR 17243-1: 2014 does not address frequency domain analyses such as fast fourier transform (FFT) analyses, envelope analyses, or other similar techniques.
| DocumentType |
Technical Report
|
| Pages |
20
|
| ProductNote |
THIS STANDARD ALSO REFERS TO Guide ISO/IEC 98-3:2008/Suppl 1, Guide ISO/IEC 98-3:2008/Suppl 2.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| PD ISO/TR 17243-1:2014 | Identical |
| NEN NPR ISO/TR 17243-1 : 2014 | Identical |
| IS 17256 : Part 1 : 2019 | Identical |
| PNE-ISO/TR 17243-1 | Identical |
| ISO 230-7:2015 | Test code for machine tools Part 7: Geometric accuracy of axes of rotation |
| ISO 13373-1:2002 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures |
| ISO 5593:1997 | Rolling bearings Vocabulary |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| ISO 13373-2:2016 | Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data |
| ISO/TR 230-8:2010 | Test code for machine tools Part 8: Vibrations |
| ISO 841:2001 | Industrial automation systems and integration — Numerical control of machines — Coordinate system and motion nomenclature |
| ISO 230-1:2012 | Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 13372:2004 | Condition monitoring and diagnostics of machines Vocabulary |
| ISO 1925:2001 | Mechanical vibration Balancing Vocabulary |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| ISO 230-2:2014 | Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.