ISO/IEC Guide 98:1993
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Guide to the expression of uncertainty in measurement (GUM)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
09-23-2021
Superseded by
Language(s)
English, French
Published date
01-01-1993
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DocumentType |
Guide
|
| Pages |
105
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| I.S. EN IEC 62828-1:2018 | REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
| 09/30165942 DC : 0 | BS ISO 21438-3 - WORKPLACE ATMOSPHERES - DETERMINATION OF INORGANIC ACIDS BY ION CHROMATOGRAPHY - PART 3: HYDROFLUORIC ACID AND PARTICULATE FLUORIDES |
| 17/30349825 DC : 0 | BS EN ISO 10704 - WATER QUALITY - GROSS ALPHA AND GROSS BETA ACTIVITY - TEST METHOD USING THIN SOURCE DEPOSIT |
| DD CEN ISO/TS 15530-3:2007 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or standards |
| 09/30187538 DC : 0 | BS EN 15979 - TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION |
| 13/30247422 DC : 0 | BS EN 62220-1-1 - MEDICAL ELECTRICAL EQUIPMENT - CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - PART 1-1: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY - DETECTORS USED IN RADIOGRAPHIC IMAGING |
| BS EN 62494-1:2008 | Medical electrical equipment. Exposure index of digital X-ray imaging systems Definitions and requirements for general radiography |
| BS EN 15305:2008 | Non-destructive testing. Test method for residual stress analysis by X-ray diffraction |
| DD ISO/TS 29041:2008 | Gas mixtures. Gravimetric preparation. Mastering correlations in composition |
| I.S. EN ISO 4869-3:2007 | ACOUSTICS - HEARING PROTECTORS - PART 3: MEASUREMENT OF INSERTION LOSS OF EAR-MUFF TYPE PROTECTORS USING AN ACOUSTIC TEST FIXTURE |
| BS EN 62220-1-3:2008 | Medical electrical equipment. Characteristics of digital X-ray imaging devices Determination of the detective quantum efficiency. Detectors used in dynamic imaging |
| ISO 5130:2007 | Acoustics Measurements of sound pressure level emitted by stationary road vehicles |
| OIML R 80-1 : 2009 | ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| BS ISO 12789-2:2008 | Reference radiation fields. Simulated workplace neutron fields Calibration fundamentals related to the basic quantities |
| 08/30192855 DC : 0 | BS ISO 5-4 - PHOTOGRAPHY AND GRAPHIC TECHNOLOGY - SPECTRAL DENSITY MEASUREMENTS - PART 4: GEOMETRIC CONDITIONS FOR REFLECTION DENSITY |
| ISO 1088:2007 | Hydrometry Velocity-area methods using current-meters Collection and processing of data for determination of uncertainties in flow measurement |
| 08/30173423 DC : DRAFT JULY 2008 | BS EN 60601-2-5 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT |
| 09/30205921 DC : 0 | BS EN 1794-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS |
| PREN ISO 80601-2-61 : DRAFT 2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| 12/30234846 DC : 0 | BS ISO 19238 - RADIATION PROTECTION - PERFORMANCE CRITERIA FOR SERVICE LABORATORIES PERFORMING BIOLOGICAL DOSIMETRY BY CYTOGENETICS |
| 08/30182096 DC : 0 | BS ISO 27894 - VACUUM TECHNOLOGY - VACUUM GAUGES - SPECIFICATIONS FOR HOT CATHODE IONIZATION GAUGES |
| 09/30196964 DC : 0 | BS EN ISO 25178-7 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS |
| 09/30187541 DC : 0 | BS EN 15991 - TESTING OF CERAMIC AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF NON-OXIDIC CERAMIC RAW AND BASIC MATERIALS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROSCOPY (ICP OES) WITH ELECTROTHERMAL VAPORISATION (ETV) |
| CEI EN 60942 : 2004 | ELECTROACOUSTICS SOUND CALIBRATORS |
| S.R. CEN ISO/TR 22007-5:2014 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011) |
| UNI EN ISO 9241-305 : 2009 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 305: OPTICAL LABORATORY TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS |
| 08/30189820 DC : DRAFT SEP 2008 | BS EN ISO 8253-1 - ACOUSTICS - AUDIOMETRIC TEST METHODS - PART 1: BASIC PURE-TONE AIR AND BONE CONDUCTION THRESHOLD AUDIOMETRY |
| UNI EN ISO 6145-4 : 2009 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 4: CONTINUOUS SYRINGE INJECTION METHOD |
| 09/30205918 DC : 0 | BS EN 1794-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE AND STABILITY REQUIREMENTS |
| DD ISO/TS 19101-2:2008 | Geographic information. Reference model Imagery |
| ISO 11843-5:2008 | Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases |
| BS EN ISO 6145-11:2008 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Electrochemical generation |
| DIN EN 1793-4:2015-05 | ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION |
| 13/30290089 DC : 0 | IEC 62321 2ND EDITION - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY PYROLYZER GAS CHROMATOGRAPHY-MASS SPECTROMETRY (PY-GC-MS), ION ATTACHMENT MASS SPECTROMETRY (IAMS), GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS) AND LIQUID CHROMATOGRAPHY - MASS SPECTROMETRY (LC-MS) |
| ISO 5667-20:2008 | Water quality Sampling Part 20: Guidance on the use of sampling data for decision making Compliance with thresholds and classification systems |
| 08/30152625 DC : DRAFT APR 2008 | BS ISO 16110-2 - HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 2: PROCEDURES TO DETERMINE EFFICIENCY |
| 11/30236685 DC : 0 | BS ISO/IEC 18047-2 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 2: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ |
| I.S. EN 60601-2-5:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-5: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC PHYSIOTHERAPY EQUIPMENT |
| 09/30196542 DC : 0 | BS ISO 9698 - WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD |
| 10/30218973 DC : DRAFT JUNE 2010 | BS EN 1793-6 - ROAD TRAFFIC NOISE REDUCING DEVICES - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 6: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF AIRBORNE SOUND INSULATION UNDER DIRECT SOUND FIELD CONDITIONS |
| BIS IS/ISO 10012 : 2003(R2009) | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| I.S. EN 62058-31:2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 31: PARTICULAR REQUIREMENTS FOR STATIC METERS FOR ACTIVE ENERGY (CLASSES 0,2 S, 0,5 S, 1 AND 2, AND CLASS INDEXES A, B AND C) |
| DD ISO/TS 13473-4:2008 | Characterization of pavement texture by use of surface profiles Spectral analysis of texture profiles |
| OIML R 81 : 1998 | DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS |
| 09/30185156 DC : 0 | BS EN 1811 - REFERENCE TEST METHODS FOR RELEASE OF NICKEL FROM PRODUCTS INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN |
| DIN EN ISO 6145-1:2008-11 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| I.S. EN 60601-2-37:2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT |
| BS EN 62127-3 : 2007 | ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ |
| UNI CEN/TS 16011 : 2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| NF EN 62127-1 : 2008 AMD 1 2013 | ULTRASONICS - HYDROPHONES - PART 1: MEASUREMENT AND CHARACTERIZATION OF MEDICAL ULTRASONIC FIELDS UP TO 40 MHZ |
| BS EN ISO 17201-1:2005 | Acoustics. Noise from shooting ranges Determination of muzzle blast by measurement |
| UNI EN 12102 : 2014 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL |
| BS EN ISO 8041:2005 | Human response to vibration. Measuring instrumentation |
| ISO/TS 25377:2007 | Hydrometric uncertainty guidance (HUG) |
| 11/30239716 DC : 0 | BS EN 16242 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| UNE-EN ISO 11205:2010 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
| UNE-EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| ISO 6142:2001 | Gas analysis Preparation of calibration gas mixtures Gravimetric method |
| BS EN ISO 4869-3:2007 | Acoustics. Hearing protectors Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
| EN 62058-21:2010 | Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B) |
| EN 62271-109:2009/A1:2013 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008/A1:2013) |
| EN 62494-1:2008 | Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements for general radiography |
| EN 61280-2-9:2009 | Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems |
| CEN ISO/TS 25377:2007 | Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007) |
| EN 62369-1:2009 | Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems |
| EN 12470-3:2000+A1:2009 | Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device |
| EN 12470-2:2000+A1:2009 | Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers |
| DIN EN ISO 15971 E : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX (ISO 15971:2008) |
| NF EN 62058-21 : 2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 21: PARTICULAR REQUIREMENTS FOR ELECTROMECHANICAL METERS FOR ACTIVE ENERGY (CLASSES 0,5, 1 AND 2 AND CLASS INDEXES A AND B) |
| I.S. EN 60068-3-11:2007 | ENVIRONMENTAL TESTING - PART 3-11: SUPPORTING DOCUMENTATION AND GUIDANCE - CALCULATION OF UNCERTAINTY OF CONDITIONS IN CLIMATIC TEST CHAMBERS |
| UNI 11314 : 2009 | METALLIC MATERIALS - CALIBRATION OF STATIC TORQUE MEASURING DEVICES |
| ISO 20486:2017 | Non-destructive testing — Leak testing — Calibration of reference leaks for gases |
| PD ISO/TR 26762:2008 | Natural gas. Upstream area. Allocation of gas and condensate |
| BS EN 60318-6:2008 | Electroacoustics. Simulators of human head and ear Mechanical coupler for the measurement of bone vibrators |
| BS EN ISO 14509-1:2008 | Small craft. Airborne sound emitted by powered recreational craft Pass-by measurement procedures |
| BS EN 60861:2008 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
| DD ISO/TS 16610-1:2006 | Geometrical product specifications (GPS). Filtration Overview and basic concepts |
| UNI EN ISO 6145-1 : 2009 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| PD CEN/TS 16011:2013 | Plastics. Recycled plastics. Sample preparation |
| UNE-EN 60601-2-5:2016 | Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
| 08/30177421 DC : DRAFT AUG 2008 | BS ISO 10302-2 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
| OIML R 115 : 1995 | CLINICAL ELECTRICAL THERMOMETERS WITH MAXIMUM DEVICE |
| 14/30313017 DC : 0 | BS ISO 17183 - SOIL QUALITY - SCREENING SOILS FOR ISOPROPANOL-EXTRACTABLE ORGANIC COMPOUNDS BY DETERMINING EMULSIFICATION INDEX BY LIGHT ATTENUATION |
| I.S. EN 62311:2008 | ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| BS ISO 15971 : 2008 | NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX |
| 13/30231417 DC : 0 | BS ISO 16258-2 - WORKPLACE AIR - RESPIRABLE CRYSTALLINE SILICA BY X-RAY DIFFRACTION - PART 2: METHOD BY INDIRECT ANALYSIS |
| 09/30198206 DC : 0 | BS ISO 17736 - WORKPLACE AIR QUALITY - DETERMINATION OF ISOCYANATE IN AIR USING A DOUBLE-FILTER SAMPLING DEVICE AND ANALYSIS BY HIGH PRESSURE LIQUID CHROMATOGRAPHY |
| NF EN 62321 : 2009 | ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS) |
| 08/30180118 DC : DRAFT MAR 2008 | BS ISO 9277 - DETERMINATION OF THE SPECIFIC SURFACE AREA OF SOLIDS BY GAS ADSORPTION - BET METHOD |
| BS EN 15483:2008 | Ambient air quality. Atmospheric measurements near ground with FTIR spectroscopy |
| ISO/TS 15530-4:2008 | Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation |
| 09/30175027 DC : 0 | BS ISO 14934-1 - FIRE TESTS - CALIBRATION AND USE OF HEAT FLUX METERS - PART 1: GENERAL PRINCIPLES |
| BS ISO 18738-1:2012 | Measurement of ride quality Lifts (elevators) |
| DIN ISO/TS 16952-1:2007-03 | TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES |
| UNI ISO/TS 21749 : 2009 | MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS |
| 08/30193653 DC : 0 | BS ISO 17123-1 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 1: THEORY |
| BS EN 60601-2-5:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
| 08/30168462 DC : DRAFT APR 2008 | BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST |
| PD CEN ISO/TR 24094:2007 | Analysis of natural gas. Validation methods for gaseous reference materials |
| BS EN ISO 6145-10:2008 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Permeation method |
| BS ISO 21243:2008 | Radiation protection. Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies. General principles and application to dicentric assay |
| UNI ISO 16702 : 2010 | WORKPLACE AIR QUALITY - DETERMINATION OF TOTAL ORGANIC ISOCYANATE GROUPS IN AIR USING 1-(2-METHOXYPHENYL)PIPERAZINE AND LIQUID CHROMATOGRAPHY |
| 09/30181956 DC : DRAFT MAY 2009 | BS ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| 08/30192767 DC : 0 | BS EN 62301 - HOUSEHOLD ELECTRICAL APPLIANCES - MANAGEMENT OF STANDBY POWER |
| CEI EN 62369-1 : 2013 | EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM SHORT RANGE DEVICES (SRDS) IN VARIOUS APPLICATIONS OVER THE FREQUENCY RANGE 0 GHZ TO 300 GHZ - PART 1: FIELDS PRODUCED BY DEVICES USED FOR ELECTRONIC ARTICLE SURVEILLANCE, RADIO FREQUENCY IDENTIFICATION AND SIMILAR SYSTEMS |
| DIN ISO 12789-2:2013-01 | REFERENCE RADIATION FIELDS - SIMULATED WORKPLACE NEUTRON FIELDS - PART 2: CALIBRATION FUNDAMENTALS RELATED TO THE BASIC QUANTITIES (ISO 12789-2:2008) |
| ISO 18738-1:2012 | Measurement of ride quality Part 1: Lifts (elevators) |
| ISO/TR 26762:2008 | Natural gas — Upstream area — Allocation of gas and condensate |
| I.S. EN ISO 15796:2008 | GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS |
| I.S. EN ISO 6145-4:2008 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 4: CONTINUOUS SYRINGE INJECTION METHOD |
| ISO 17183:2016 | Soil quality Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuation |
| BS ISO 5130 : 2007 | ACOUSTICS - MEASUREMENTS OF SOUND PRESSURE LEVEL EMITTED BY STATIONARY ROAD VEHICLES |
| OIML R 114 : 1995 | CLINICAL ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| ASTM E 2536 : 2015 : REV A | Standard Guide for Assessment of Measurement Uncertainty in Fire Tests |
| ISO 17201-1:2005 | Acoustics Noise from shooting ranges Part 1: Determination of muzzle blast by measurement |
| IEC TS 62492-1:2008 | Industrial process control devices - Radiation thermometers - Part 1: Technical data for radiation thermometers |
| UNI EN ISO 14978 : 2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| I.S. EN ISO 19739:2006 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| I.S. EN 62494-1:2008 | MEDICAL ELECTRICAL EQUIPMENT - EXPOSURE INDEX OF DIGITAL X-RAY IMAGING SYSTEMS - PART 1: DEFINITIONS AND REQUIREMENTS FOR GENERAL RADIOGRAPHY |
| IEC 62369-1:2008 | Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems |
| EN 62311:2008 | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
| IEC 62127-2:2007+AMD1:2013+AMD2:2017 CSV | Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz |
| BS EN 12470-3 : 2000 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| I.S. EN ISO 21649:2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 5667-1:2006 | WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES |
| I.S. EN 12470-2:2000 | CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| I.S. EN ISO 11205:2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY |
| I.S. EN ISO 9614-3:2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| BS EN 61280-2-9:2009 | Fibre optic communication subsystem test procedures Digital systems. Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems |
| 11/30241721 DC : 0 | BS EN 62321-6 ED1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 6: DETERMINATION OF POLYBROMINATED BIPHENYLS AND POLYBROMINATED DIPHENYL ETHERS IN POLYMERS AND ELECTRONICS BY GC-MS, IAMS AND HPLC-UV |
| OIML R 140 : 2007 | MEASURING SYSTEMS FOR GASEOUS FUEL |
| DIN EN ISO 6145-4:2008-11 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004) |
| DD ISO/TS 15530-4:2008 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation |
| I.S. EN ISO 9919:2009 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| 09/30125465 DC : 0 | BS ISO 8769 - REFERENCE SOURCES - CALIBRATION OF SURFACE CONTAMINATION MONITORS - ALPHA-, BETA- AND PHOTON EMITTERS |
| I.S. EN 50492:2008 | BASIC STANDARD FOR THE IN-SITU MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH RELATED TO HUMAN EXPOSURE IN THE VICINITY OF BASE STATIONS |
| BS ISO 16000-8:2007 | Indoor air Determination of local mean ages of air in buildings for characterizing ventilation conditions |
| 13/30286032 DC : 0 | BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS |
| BS EN 60068-3-11:2007 | Environmental testing Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers |
| BS EN ISO 6145-4:2008 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Continuous syringe injection method |
| DD ISO/TS 19036 : 2006 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GUIDELINES FOR THE ESTIMATION OF MEASUREMENT UNCERTAINTY FOR QUANTITATIVE DETERMINATIONS |
| 08/30139611 DC : DRAFT JUNE 2008 | BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| 09/30205176 DC : 0 | ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY |
| BS EN 62369-1:2009 | Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems |
| UNI EN 15483 : 2009 | AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY |
| BS EN ISO 16000-15:2008 | Indoor air Sampling strategy for nitrogen dioxide (NO2) |
| DIN EN ISO 10360-10:2017-03 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| UNI EN ISO 6145-11 : 2009 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 11: ELECTROCHEMICAL GENERATION |
| NF EN 62058-31 : 2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 31: PARTICULAR REQUIREMENTS FOR STATIC METERS FOR ACTIVE ENERGY (CLASSES 0,2 S, 0,5 S, 1 AND 2 AND CLASS INDEXES A, B AND C) |
| OIML R 137-1 : 2006 | GAS METERS - PART 1: REQUIREMENTS |
| OIML R 129 : 2000 | MULTI-DIMENSIONAL MEASURING INSTRUMENTS |
| PD CEN ISO/TR 22007-5:2014 | Plastics. Determination of thermal conductivity and thermal diffusivity Results of interlaboratory testing of poly(methyl methacrylate) samples |
| 09/30198179 DC : 0 | BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES |
| BS ISO 1088:2007 | Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement |
| 17/30339109 DC : 0 | BS ISO 17123-9 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 9: TERRESTRIAL LASER SCANNERS |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| BS EN 62233:2008 | Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| UNI ISO 11648-2 : 2008 | STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 2: SAMPLING OF PARTICULATE MATERIALS |
| NF EN 60861 : 2008 | EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS |
| ISO 14509-1:2008 | Small craft — Airborne sound emitted by powered recreational craft — Part 1: Pass-by measurement procedures |
| UNE-EN ISO 10360-10:2017 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| BS EN 62271-100 : 2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008) |
| ISO/TS 29041:2008 | Gas mixtures — Gravimetric preparation — Mastering correlations in composition |
| I.S. EN ISO 6145-10:2008 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 10: PERMEATION METHOD |
| ISO 15011-4:2017 | Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets |
| UNI EN ISO 15796 : 2009 | GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS |
| I.S. EN 62220-1-3:2008 | MEDICAL ELECTRICAL EQUIPMENT - CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - PART 1-3: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY - DETECTORS USED IN DYNAMIC IMAGING |
| I.S. EN 62471:2008 | PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS |
| CEI EN 62058-21 : 2011 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 21: PARTICULAR REQUIREMENTS FOR ELECTROMECHANICAL METERS FOR ACTIVE ENERGY (CLASSES 0,5, 1 AND 2 AND CLASS INDEXES A AND B) |
| UNI EN ISO 15971 : 2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX |
| ISO 18589-1:2005 | Measurement of radioactivity in the environment Soil Part 1: General guidelines and definitions |
| UNE-EN 62369-1:2011 | Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz -- Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems |
| ASTM D 7911 : 2014 | Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
| I.S. EN 15483:2008 | AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY |
| ISO 16702:2007 | Workplace air quality — Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl)piperazine and liquid chromatography |
| IEC 62058-31:2008 | Electricity metering equipment (AC) - Acceptance inspection - Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) |
| BS EN ISO 9919:2009 | Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
| ISO 6145-1:2003 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration |
| IEC 61280-2-9:2009 | Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems |
| ASA/ANSI S12.75:2012(R2020) | METHODS FOR THE MEASUREMENT OF NOISE EMISSIONS FROM HIGH PERFORMANCE MILITARY JET AIRCRAFT |
| BIS IS 1608 : 2005 | METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE |
| I.S. EN ISO 8655-6:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR |
| EN ISO 16000-15:2008 | Indoor air - Part 15: Sampling strategy for nitrogen dioxide (NO2) (ISO 16000-15:2008) |
| EN ISO 9241-305:2008 | Ergonomics of human-system interaction - Part 305: Optical laboratory test methods for electronic visual displays (ISO 9241-305:2008) |
| UNI EN 12470-4 : 2009 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| PREN ISO 25178-7 : DRAFT 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS |
| UNI EN ISO 11205 : 2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY |
| UNI EN 12470-3 : 2009 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| UNI EN ISO 9614-3 : 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
| UNI EN 12470-2 : 2009 | CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| EN ISO 9919:2009 | Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use (ISO 9919:2005) |
| UNI EN ISO 9919 : 2009 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| 08/30173520 DC : DRAFT FEB 2008 | BS EN 15758 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS |
| IEEE/ANSI C63.5-2017 | American National Standard for Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control--Calibration and Qualification of Antennas (9 kHz to 40 GHz) |
| DIN EN 15483:2009-02 | AMBIENT AIR QUALITY - ATMOSPHERIC MEASUREMENTS NEAR GROUND WITH FTIR SPECTROSCOPY |
| IEC 62303:2008 | Radiation protection instrumentation - Equipment for monitoring airborne tritium |
| PD ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| DD IEC TS 62492-1 : DRAFT 2008 | INDUSTRIAL PROCESS CONTROL DEVICES - RADIATION THERMOMETERS - PART 1: TECHNICAL DATA FOR RADIATION THERMOMETERS |
| 14/30288436 DC : 0 | BS EN ISO 27971 - CEREALS AND CEREAL PRODUCTS - COMMON WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF ALVEOGRAPHIC PROPERTIES OF DOUGH AT CONSTANT HYDRATION FROM COMMERCIAL OR TEST FLOURS AND TEST MILLING METHODOLOGY |
| BS EN ISO 15796:2008 | Gas analysis. Investigation and treatment of analytical bias |
| PREN 15979 : DRAFT 2009 | TESTING OF CERAMIC RAW AND BASIC MATERIALS - DIRECT DETERMINATION OF MASS FRACTIONS OF IMPURITIES IN POWDERS AND GRANULES OF SILICON CARBIDE BY OES BY DC ARC EXCITATION |
| 09/30165939 DC : 0 | BS ISO 30011 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY |
| ISO/TS 13473-4:2008 | Characterization of pavement texture by use of surface profiles — Part 4: Spectral analysis of surface profiles |
| 08/30176438 DC : DRAFT JAN 2008 | BS EN 60645-1 - ELECTRO ACOUSTICS - AUDIOMETRIC EQUIPMENT - PART 1: PURE-TONE AUDIOMETERS |
| OIML R 99-1 & 2 : 2008 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| IEC 62058-21:2008 | Electricity metering equipment (AC) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2) |
| BS ISO 5667-20:2008 | Water quality. Sampling Guidance on the use of sampling data for decision making. Compliance with thresholds and classification systems |
| ISO 21243:2008 | Radiation protection — Performance criteria for laboratories performing cytogenetic triage for assessment of mass casualties in radiological or nuclear emergencies — General principles and application to dicentric assay |
| OIML R 117-1 : 2007 | DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| 07/30126052 DC : 0 | BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS |
| 12/30191872 DC : 0 | BS EN 60601-2-62 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-62: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HIGH INTENSITY THERAPEUTIC ULTRASOUND (HITU) SYSTEM |
| S.R. CLC/TR 50462:2008 | RULES FOR THE DETERMINATION OF UNCERTAINTIES IN THE MEASUREMENT OF THE LOSSES ON POWER TRANSFORMERS AND REACTORS |
| BS EN ISO 16610-85:2013 | Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation |
| PREN 16523-2 : DRAFT 2013 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| PREN 1811 : DRAFT 2009 | REFERENCE TEST METHOD FOR RELEASE OF NICKEL FROM POST ASSEMBLIES WHICH ARE INSERTED INTO PIERCED PARTS OF THE HUMAN BODY AND PRODUCTS INTENDED TO COME INTO DIRECT AND PROLONGED CONTACT WITH THE SKIN |
| DIN EN ISO 9241-305:2009-06 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 305: OPTICAL LABORATORY TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS |
| UNI EN ISO 16000-12 : 2008 | INDOOR AIR - PART 12: SAMPLING STRATEGY FOR POLYCHLORINATED BIPHENYLS (PCBS), POLYCHLORINATED DIBENZO-P-DIOXINS (PCDDS), POLYCHLORINATED DIBENZOFURANS (PCDFS) AND POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) |
| 09/30191982 DC : 0 | BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION |
| BS EN ISO 14912:2006 | Gas analysis. Conversion of gas mixture composition data |
| 08/30157876 DC : 0 | |
| 08/30158227 DC : DRAFT JUNE 2008 | BS EN ISO 21258 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE - REFERENCE METHOD - NON-DISPERSIVE INFRARED METHOD |
| 14/30297521 DC : 0 | BS EN 16272-4 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE - PART 4: INTRINSIC CHARACTERISTICS - IN SITU VALUES OF SOUND DIFFRACTION UNDER DIRECT SOUND FIELD CONDITIONS |
| BS EN 62471:2008 | Photobiological safety of lamps and lamp systems |
| CEI EN 62220-1-3 : 2010 | MEDICAL ELECTRICAL EQUIPMENT - CHARACTERISTICS OF DIGITAL X-RAY IMAGING DEVICES - PART 1: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY - DETECTORS USED IN DYNAMIC IMAGING |
| BS ISO 15796 : 2005 | GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS |
| 09/30168992 DC : 0 | BS ISO 1100-2 - HYDROMETRY MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - PART 2: DETERMINATION OF THE STAGE-DISCHARGE RELATION |
| ISO/TS 16610-1:2006 | Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts |
| BS ISO 18589-1:2005 | Measurement of radioactivity in the environment. Soil General guidelines and definitions |
| 09/30192061 DC : 0 | BS ISO 11382 - OPTICS AND PHOTONICS - OPTICAL MATERIALS AND COMPONENTS - CHARACTERIZATION OF OPTICAL MATERIALS USED IN THE INFRARED SPECTRAL RANGE FROM 0,78 [MU]M TO 25 [MU]M |
| UNI EN ISO 15011-4 : 2009 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 4: FUME DATA SHEETS |
| CAN/CSA-C62301:2011(R2016) | HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| UNI ISO 11648-1 : 2008 | STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 1: GENERAL PRINCIPLES |
| DIN EN ISO 15971:2014-09 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| ANSI/ASA S12.75 : 2012 | METHODS FOR THE MEASUREMENT OF NOISE EMISSIONS FROM HIGH PERFORMANCE MILITARY JET AIRCRAFT |
| ASTM G 213 : 2017 | Standard Guide for Evaluating Uncertainty in Calibration and Field Measurements of Broadband Irradiance with Pyranometers and Pyrheliometers |
| S.R. CEN/TS 16011:2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| UNI EN 15305 : 2008 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| EN 62271-100 : 2009 AMD 2/COR 18 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 100: ALTERNATING-CURRENT CIRCUIT-BREAKERS (IEC 62271-100:2008/A2:2017/COR1:2018) |
| BIS IS 1500 : 2005 | METHOD FOR BRINELL HARDNESS TEST FOR METALLIC MATERIALS |
| PREN 1794-2 : DRAFT 2009 | ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 2: GENERAL SAFETY AND ENVIRONMENTAL REQUIREMENTS |
| I.S. EN 62271-109:2009 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008 (EQV)) |
| I.S. EN 15305:2008 | NON-DESTRUCTIVE TESTING - TEST METHOD FOR RESIDUAL STRESS ANALYSIS BY X-RAY DIFFRACTION |
| EN ISO 14509-1:2008 | Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008) |
| I.S. EN ISO 10846-5:2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ANSI S12.76 : 2017 | METHODS FOR MEASUREMENT OF SUPERSONIC JET NOISE FROM UNINSTALLED MILITARY AIRCRAFT ENGINES |
| EN IEC 62828-1:2018 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters |
| BS EN ISO 6145-1:2008 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Methods of calibration |
| TS 102 706 : 1.3.1 | ENVIRONMENTAL ENGINEERING (EE); MEASUREMENT METHOD FOR ENERGY EFFICIENCY OF WIRELESS ACCESS NETWORK EQUIPMENT |
| ISO/TR 9464:2008 | Guidelines for the use of ISO 5167:2003 |
| I.S. EN 61280-2-9:2009 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 2-9: DIGITAL SYSTEMS - OPTICAL SIGNAL-TO-NOISE RATIO MEASUREMENT FOR DENSE WAVELENGTH-DIVISION MULTIPLEXED SYSTEMS |
| ISO 9241-305:2008 | Ergonomics of human-system interaction — Part 305: Optical laboratory test methods for electronic visual displays |
| IEC 62220-1-3:2008 | Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging |
| IEC 61966-5:2008 | Multimedia systems and equipment - Colour measurement and management - Part 5: Equipment using plasma display panels |
| ISO 6145-11:2005 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11: Electrochemical generation |
| ISO 4869-3:2007 | Acoustics — Hearing protectors — Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
| BS EN ISO 20988:2007 | Air quality. Guidelines for estimating measurement uncertainty |
| IEC 62321:2008 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
| ISO 15796:2005 | Gas analysis — Investigation and treatment of analytical bias |
| ISO 6145-10:2002 | Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method |
| ISO/TR 22007-5:2011 | Plastics Determination of thermal conductivity and thermal diffusivity Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples |
| IEC 62494-1:2008 | Medical electrical equipment - Exposure index of digital X-ray imaging systems - Part 1: Definitions and requirements for general radiography |
| ISO 14912:2003 | Gas analysis — Conversion of gas mixture composition data |
| UNE-EN ISO 9614-3:2010 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| IEC 62271-109:2008+AMD1:2013 CSV | High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches |
| BS EN 12470-2 : 2001 | CLINICAL THERMOMETERS - PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| ISO/TS 15530-3:2004 | Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 3: Use of calibrated workpieces or standards |
| ISO 20988:2007 | Air quality Guidelines for estimating measurement uncertainty |
| UNE-CEN/TS 16011:2015 EX | Plastics - Recycled plastics - Sample preparation |
| ISO 12179:2000 | Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
| ISO 15971:2008 | Natural gas Measurement of properties Calorific value and Wobbe index |
| EN 60318-6:2008 | Electroacoustics - Simulators of human head and ear - Part 6: Mechanical coupler for the measurement of bone vibrators |
| EN ISO 6145-10:2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002) |
| I.S. EN ISO 12179:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
| EN ISO 15796:2008 | Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005) |
| EN ISO 4869-3:2007 | Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) |
| EN ISO 6145-1:2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003) |
| EN 15483:2008 | Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy |
| EN ISO 6145-11:2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005) |
| EN ISO 6145-4:2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004) |
| EN ISO 20988:2007 | Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007) |
| UNI EN ISO 5667-1 : 2007 | WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES |
| EN ISO 5667-1 : 2006 COR 2007 | WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES |
| I.S. EN ISO 14509-1:2008 | SMALL CRAFT - AIRBORNE SOUND EMITTED BY POWERED RECREATIONAL CRAFT - PART 1: PASS-BY MEASUREMENT PROCEDURES |
| DIN EN ISO 6145-11:2008-11 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 11: ELECTROCHEMICAL GENERATION |
| 09/30169001 DC : 0 | BS ISO 2425 - HYDROMETRY - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS UNDER TIDAL CONDITIONS |
| BS EN ISO 9241-305:2008 | Ergonomics of human-system interaction Optical laboratory test methods for electronic visual displays |
| I.S. EN ISO 16000-15:2008 | INDOOR AIR - PART 15: SAMPLING STRATEGY FOR NITROGEN DIOXIDE (NO[2]) |
| CEI EN 62494-1 : 2010 | MEDICAL ELECTRICAL EQUIPMENT - EXPOSURE INDEX OF DIGITAL X-RAY IMAGING SYSTEMS - PART 1: DEFINITIONS AND REQUIREMENTS FOR GENERAL RADIOGRAPHY |
| CEI CLC/TR 50462 : 2009 | RULES FOR THE DETERMINATION OF UNCERTAINTIES IN THE MEASUREMENT OF THE LOSSES ON POWER TRANSFORMERS AND REACTORS |
| 16/30341847 DC : 0 | BS EN 62321-8 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 8: PHTHALATES IN POLYMERS BY GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC- MS), PYROLYSIS/THERMAL DESORPTION-GAS CHROMATOGRAPHY-MASS SPECTROMETRY (PY/TD-GC-MS) |
| I.S. EN 62058-21:2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 21: PARTICULAR REQUIREMENTS FOR ELECTROMECHANICAL METERS FOR ACTIVE ENERGY (CLASSES 0,5, 1 AND 2 AND CLASS INDEXES A AND B) |
| 08/30192849 DC : 0 | BS ISO 5-2 - PHOTOGRAPHY AND GRAPHIC TECHNOLOGY - SPECTRAL DENSITY MEASUREMENTS - PART 2: GEOMETRIC CONDITIONS FOR TRANSMISSION DENSITY |
| 10/30213842 DC : 0 | BS EN ISO 11608-5 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS |
| I.S. EN 62369-1:2009 | EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM SHORT RANGE DEVICES (SRDS) IN VARIOUS APPLICATIONS OVER THE FREQUENCY RANGE 0 GHZ TO 300 GHZ - PART 1: FIELDS PRODUCED BY DEVICES USED FOR ELECTRONIC ARTICLE SURVEILLANCE, RADIO FREQUENCY IDENTIFICATION AND SIMILAR SYSTEMS |
| BS ISO 16702:2007 | Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography |
| DD CEN ISO/TS 25377:2007 | Hydrometric uncertainty guide |
| DIN EN ISO 6145-10:2008-11 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 10: PERMEATION METHOD |
| BS ISO 17183:2016 | Soil quality. Screening soils for isopropanol-extractable organic compounds by determining emulsification index by light attenuation |
| BS EN 62321:2009 | Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
| BS ISO 12789-1:2008 | Reference radiation fields. Simulated workplace neutron fields Characteristics and methods of production |
| CSA C62301:2011 | HOUSEHOLD ELECTRICAL APPLIANCES - MEASUREMENT OF STANDBY POWER |
| I.S. EN ISO 6145-11:2008 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 11: ELECTROCHEMICAL GENERATION |
| CLC/TR 50462:2008 | Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors |
| I.S. EN 60861:2008 | EQUIPMENT FOR MONITORING OF RADIONUCLIDES IN LIQUID EFFLUENTS AND SURFACE WATERS |
| I.S. EN ISO 15971:2014 | NATURAL GAS - MEASUREMENT OF PROPERTIES - CALORIFIC VALUE AND WOBBE INDEX (ISO 15971:2008) |
| UNI EN ISO 6145-10 : 2009 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 10: PERMEATION METHOD |
| BS ISO 11843-5 : 2008 | CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| ISO/TS 19036:2006 | Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative determinations |
| I.S. EN 62321:2009 | ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS) |
| UNE-EN ISO 15971:2014 | Natural gas - Measurement of properties - Calorific value and Wobbe index (ISO 15971:2008) |
| I.S. EN ISO 17201-1:2005 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: DETERMINATION OF MUZZLE BLAST BY MEASUREMENT |
| I.S. EN 62127-3:2007 | ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-3:2007 (EQV)) |
| CEI EN 62058-31 : 2012 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 31: PARTICULAR REQUIREMENTS FOR STATIC METERS FOR ACTIVE ENERGY (CLASSES 0,2 S, 0,5 S, 1 AND 2, AND CLASS INDEXES A, B AND C) |
| IEC 60601-2-5:2009 | Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
| ISO 12789-2:2008 | Reference radiation fields — Simulated workplace neutron fields — Part 2: Calibration fundamentals related to the basic quantities |
| I.S. EN ISO 6145-1:2008 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| ISO/TS 19101-2:2008 | Geographic information Reference model Part 2: Imagery |
| I.S. EN ISO 9241-305:2009 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 305: OPTICAL LABORATORY TEST METHODS FOR ELECTRONIC VISUAL DISPLAYS |
| I.S. CEN ISO/TS 25377:2007 | HYDROMETRIC UNCERTAINTY GUIDANCE (HUG) |
| I.S. EN 60318-6:2008 | ELECTROACOUSTICS - SIMULATORS OF HUMAN HEAD AND EAR - PART 6: MECHANICAL COUPLER FOR THE MEASUREMENT OF BONE VIBRATORS |
| EN 62127-3:2007/A1:2013 | ULTRASONICS - HYDROPHONES - PART 3: PROPERTIES OF HYDROPHONES FOR ULTRASONIC FIELDS UP TO 40 MHZ (IEC 62127-3:2007/A1:2013) |
| ISO 5667-1:2006 | Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques |
| BS EN ISO 12179:2001 | Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments |
| ISO 6145-4:2004 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 4: Continuous syringe injection method |
| BS EN ISO 8655-6:2002 | Piston-operated volumetric apparatus Gravimetric methods for the determination of measurement error |
| ISO 9919:2005 | Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
| ISO 8655-6:2002 | Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error |
| ISO 8041:2005 | Human response to vibration Measuring instrumentation |
| EN 62220-1-3:2008 | Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3: Determination of the detective quantum efficiency - Detectors used in dynamic imaging |
| CEN ISO/TR 22007-5:2014 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011) |
| CEN/TS 16011:2013 | Plastics - Recycled plastics - Sample preparation |
| CEN ISO/TS 15530-3:2007 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004) |
| DIN EN ISO 20988:2007-09 | AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY |
| EN 62471:2008 | Photobiological safety of lamps and lamp systems |
| EN 60601-2-5:2015 | Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
| EN 62321:2009 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
| EN 60861:2008 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
| DIN EN ISO 4869-3:2007-09 | Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007); German version EN ISO 4869-3:2007 |
| EN 60068-3-11:2007 | Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers |
| CSA C22.2 No. 60601.2.37 : 2008 : R2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT |
| CSA C22.2 No. 60601.2.37:2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.