ISO/IEC 18000-63:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Information technology Radio frequency identification for item management Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
11-17-2021
Superseded by
Language(s)
Russian, English
Published date
10-20-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/IEC 18000-3:2015 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. This part of ISO/IEC 18000 is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface.
ISO/IEC 18000-3:2015 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator.
In detail, ISO/IEC 18000-3:2015 contains Type C.
Type C uses PIE in the forward link and a random slotted collision-arbitration algorithm.
ISO/IEC 18000-3:2015 specifies
- physical interactions (the signalling layer of the communication link) between Interrogators and tags,
- logical operating procedures and commands between Interrogators and Tags,
- the collision arbitration scheme used to identify a specific tag in a multiple-tag environment,
- optional security commands that allow the use of crypto suites of ISO/IEC 29167.
| DevelopmentNote |
Together with ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-64 & ISO/IEC 18000-6:2013 it supersedes ISO/IEC 18000-6:2010. (03/2013)
|
| DocumentType |
Standard
|
| Pages |
361
|
| ProductNote |
THIS STANDARD ALSO REFERS TO IETF RFC 1769,ETSI EN 302 208-2,ETSI EN 302 208-2,ETSI EN 300 220 (all parts),CEPT/ERC Recommendation 70-03, ARIB STD-T89,ARIB STD-T90
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO/IEC 18000-63 : 2015 | Identical |
| CAN/CSA-ISO/IEC 18000-63:16 | Identical |
| BS ISO/IEC 18000-63:2015 | Identical |
| BS ISO/IEC 29173-1:2012 | Information technology. Mobile item identification and management Mobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C |
| 17/30365759 DC : 0 | BS ISO/IEC 15963-1 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - UNIQUE IDENTIFICATION FOR RF TAGS - PART 1: UNIQUE IDENTIFICATION FOR RF TAGS NUMBERING SYSTEMS |
| BS EN 16571:2014 | Information technology. RFID privacy impact assessment process |
| SAE AS 5678 : 2015 | PASSIVE RFID TAGS INTENDED FOR AIRCRAFT USE |
| PD ISO/TS 28560-4:2014 | Information and documentation. RFID in libraries Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory |
| CEN/TR 16671:2014 | Information technology - Authorization of mobile phones when used as RFID interrogators |
| CEN/TR 16670:2014 | Information technology - RFID threat and vulnerability analysis |
| ISO 18616-1:2016 | Transport packaging Reusable, rigid plastic distribution boxes Part 1: General purpose application |
| CEN/TR 16669:2014 | Information technology - Device interface to support ISO/IEC 18000-3 |
| S.R. CEN/TR 16671:2014 | INFORMATION TECHNOLOGY - AUTHORIZATION OF MOBILE PHONES WHEN USED AS RFID INTERROGATORS |
| ISO/IEC 29167-10:2017 | Information technology — Automatic identification and data capture techniques — Part 10: Crypto suite AES-128 security services for air interface communications |
| CSA ISO/IEC 29167-10 : 2016 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - PART 10: CRYPTO SUITE AES-128 SECURITY SERVICES FOR AIR INTERFACE COMMUNICATIONS |
| ISO/TS 28560-4:2014 | Information and documentation — RFID in libraries — Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory |
| VDA 5509 : 2016 | AUTOID/RFID-APPLICATION AND DATA TRANSFER FOR TRACKING PARTS AND COMPONENTS IN THE VEHICLE DEVELOPMENT PROCESS |
| 11/30246357 DC : 0 | BS ISO/IEC 18000-6 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 6: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
| PD ISO/TS 18625:2017 | Freight containers. Container Tracking and Monitoring Systems (CTMS): Requirements |
| 17/30336182 DC : 0 | BS ISO/IEC 29167-22 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - PART 22: CRYPTO SUITE SPECK SECURITY SERVICES FOR AIR INTERFACE COMMUNICATIONS |
| BS ISO 17365:2013 | Supply chain applications of RFID. Transport units |
| ISO/IEC 29167-14:2015 | Information technology Automatic identification and data capture techniques Part 14: Crypto suite AES OFB security services for air interface communications |
| BS ISO/IEC 18047-6:2017 | Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications at 860 MHz to 960 MHz |
| PD CEN/TR 16670:2014 | Information technology. RFID threat and vulnerability analysis |
| BS ISO/IEC 29161:2016 | Information technology. Data structure. Unique identification for the Internet of Things |
| 13/30264428 DC : 0 | BS ISO/IEC 15961-4 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION (RFID) FOR ITEM MANAGEMENT: DATA PROTOCOL - PART 4: APPLICATION INTERFACE COMMANDS FOR BATTERY ASSIST AND SENSOR FUNCTIONALITY |
| 16/30322561 DC | BS ISO/IEC 19823-10. Information technology. Conformance test methods for security service crypto suites. Part 10. Crypto suite AES-128 |
| ISO/IEC 15961-4:2016 | Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 4: Application interface commands for battery assist and sensor functionality |
| ISO/TS 18625:2017 | Freight containers — Container Tracking and Monitoring Systems (CTMS): Requirements |
| ISO/IEC 18047-6:2017 | Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
| PD ISO/IEC TS 29167-15:2017 | Information technology. Automatic identification and data capture techniques Crypto suite XOR security services for air interface communications |
| DIN EN 16571:2014-10 | INFORMATION TECHNOLOGY - RFID PRIVACY IMPACT ASSESSMENT PROCESS |
| ISO/IEC 18000-6:2013 | Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General |
| ISO/IEC 29167-17:2015 | Information technology Automatic identification and data capture techniques Part 17: Crypto suite cryptoGPS security services for air interface communications |
| BS ISO/IEC 18000-6:2013 | Information technology. Radio frequency identification for item management Parameters for air interface communications at 860 MHz to 960 MHz General |
| BS ISO 17367:2013 | Supply chain applications of RFID. Product tagging |
| ISO/IEC 21277:2018 | Information technology — Radio frequency identification device performance test methods — Crypto suite |
| 16/30332188 DC : 0 | BS ISO/IEC 29167-10 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - PART 10: CRYPTO SUITE AES-128 SECURITY SERVICES FOR AIR INTERFACE COMMUNICATIONS |
| BS ISO/IEC 19823-10:2017 | Information technology. Conformance test methods for security service crypto suites Crypto suite AES-128 |
| 15/30274808 DC : 0 | BS ISO/IEC 29161 - INFORMATION TECHNOLOGY - DATA STRUCTURE - UNIQUE IDENTIFICATION FOR LOT |
| CSA ISO/IEC 18000-6 : 2015 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 6: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ GENERAL |
| BS ISO/IEC 29167-10:2017 | Information technology. Automatic identification and data capture techniques Crypto suite AES-128 security services for air interface communications |
| CAN/CSA-ISO/IEC 29167-12:16 | Information technology Automatic identification and data capture techniques Part 12: Crypto suite ECC-DH security services for air interface communication (Adopted ISO/IEC 29167-12:2015, first edition, 2015-05-15) |
| ISO/IEC TS 29167-15:2017 | Information technology — Automatic identification and data capture techniques — Part 15: Crypto suite XOR security services for air interface communications |
| ISO/IEC 20248:2018 | Information technology Automatic identification and data capture techniques Data structures Digital signature meta structure |
| ISO 17367:2013 | Supply chain applications of RFID — Product tagging |
| TS 101 602 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TECHNICAL SPECIFICATION ON PRELIMINARY TESTS AND TRIAL TO VERIFY MITIGATION TECHNIQUES USED BY RFID SYSTEMS FOR SHARING SPECTRUM BETWEEN RFID AND ER-GSM |
| ISO 17365:2013 | Supply chain applications of RFID — Transport units |
| UNI EN 16571 : 2014 | INFORMATION TECHNOLOGY - RFID PRIVACY IMPACT ASSESSMENT PROCESS |
| ISO/IEC 29167-11:2014 | Information technology — Automatic identification and data capture techniques — Part 11: Crypto suite PRESENT-80 security services for air interface communications |
| ISO 17366:2013 | Supply chain applications of RFID — Product packaging |
| ISO/IEC 29167-12:2015 | Information technology Automatic identification and data capture techniques Part 12: Crypto suite ECC-DH security services for air interface communications |
| VDA 5500 : APR 2015 | BASIC PRINCIPLES FOR RFID APPLICATION IN THE AUTOMOTIVE INDUSTRY |
| 16/30315793 DC : 0 | BS ISO/IEC 18047-6 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
| PD CEN/TR 16672:2014 | Information technology. Privacy capability features of current RFID technologies |
| 17/30336179 DC : 0 | BS ISO/IEC 29167-21 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - PART 21: CRYPTO SUITE SIMON SECURITY SERVICES FOR AIR INTERFACE COMMUNICATIONS |
| 17/30357733 DC : 0 | BS ISO 20909 - RADIO FREQUENCY IDENTIFICATION (RFID) TYRE TAGS |
| BS ISO 18616-1:2016 | Transport packaging. Reusable, rigid plastic distribution boxes General purpose application |
| PD CEN/TR 16669:2014 | Information technology. Device interface to support ISO/IEC 18000-3 |
| BS ISO 17366:2013 | Supply chain applications of RFID. Product packaging |
| I.S. EN 16571:2014 | INFORMATION TECHNOLOGY - RFID PRIVACY IMPACT ASSESSMENT PROCESS |
| CAN/CSA-ISO/IEC 29167-14:16 | Information technology Automatic identification and data capture techniques Part 14: Crypto suite AES OFB security services for air interface communications (Adopted ISO/IEC 29167-14:2015, first edition, 2015-10-15) |
| ISO/IEC 19823-10:2017 | Information technology Conformance test methods for security service crypto suites Part 10: Crypto suite AES-128 |
| ISO/IEC 29167-13:2015 | Information technology — Automatic identification and data capture techniques — Part 13: Crypto suite Grain-128A security services for air interface communications |
| ISO/TR 17370:2013 | Application Guideline on Data Carriers for Supply Chain Management |
| CAN/CSA-ISO/IEC 29167-17:16 | Information technology Automatic identification and data capture techniques Part 17: Crypto suite cryptoGPS security services for air interface communications (Adopted ISO/IEC 29167-17:2015, first edition, 2015-06-01) |
| CSA ISO/IEC 29167-19 : 2018 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - PART 19: CRYPTO SUITE RAMON SECURITY SERVICES FOR AIR INTERFACE COMMUNICATIONS |
| ISO/IEC 29161:2016 | Information technology Data structure Unique identification for the Internet of Things |
| S.R. CEN/TR 16669:2014 | INFORMATION TECHNOLOGY - DEVICE INTERFACE TO SUPPORT ISO/IEC 18000-3 |
| CAN/CSA-ISO/IEC 29167-13:16 | Information technology Automatic identification and data capture techniques Part 13: Crypto suite Grain-128A security services for air interface communications (Adopted ISO/IEC 29167-13:2015, first edition, 2015-05-15) |
| ISO 17364:2013 | Supply chain applications of RFID — Returnable transport items (RTIs) and returnable packaging items (RPIs) |
| EN 16571:2014 | Information technology - RFID privacy impact assessment process |
| 17/30357736 DC : 0 | BS ISO 20910 - CODING FOR RADIO FREQUENCY IDENTIFICATION (RFID) TYRE TAGS |
| S.R. CEN/TR 16670:2014 | INFORMATION TECHNOLOGY - RFID THREAT AND VULNERABILITY ANALYSIS |
| 18/30357579 DC : 0 | BS ISO/IEC 19823-19 - INFORMATION TECHNOLOGY - CONFORMANCE TEST METHODS FOR SECURITY SERVICE CRYPTO SUITES - PART 19: CRYPTO SUITE RAMON |
| BS ISO 17364:2013 | Supply chain applications of RFID. Returnable transport items (RTIs) and returnable packaging items (RPIs) |
| VDA 5510 : 2015 | RFID FOR TRACKING PARTS AND COMPONENTS IN THE AUTOMOTIVE INDUSTRY |
| 18/30367946 DC : 0 | BS ISO/IEC 15963-2 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 2: UNIQUE IDENTIFICATION FOR RF TAGS REGISTRATION PROCEDURES |
| VDA 5501 : 2016 | RFID FOR CONTAINER MANAGEMENT IN THE SUPPLY CHAIN |
| 17/30322567 DC : 0 | BS ISO/IEC 19823-13 - INFORMATION TECHNOLOGY - CONFORMANCE TEST METHODS FOR SECURITY SERVICE CRYPTO SUITES - PART 13: CRYPTOGRAPHIC SUITE GRAIN-128A |
| DIN EN 16571 E : 2014 | INFORMATION TECHNOLOGY - RFID PRIVACY IMPACT ASSESSMENT PROCESS |
| 17/30339128 DC : 0 | BS ISO/IEC 21277 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - CRYPTO SUITE |
| CEN/TR 16672:2014 | Information technology - Privacy capability features of current RFID technologies |
| VDA 5520 : 2017 | RFID FOR VEHICLE IDENTIFICATION IN PRODUCTION, LOGISTICS AND FOR THE REALIZATION OF SERVICES |
| S.R. CEN/TR 16672:2014 | INFORMATION TECHNOLOGY - PRIVACY CAPABILITY FEATURES OF CURRENT RFID TECHNOLOGIES |
| ISO/IEC 29173-1:2012 | Information technology Mobile item identification and management Part 1: Mobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C |
| CAN/CSA-ISO/IEC 15961-4:18 | Information technology ? Radio frequency identification (RFID) for item management: Data protocol ? Part 4: Application interface commands for battery assist and sensor functionality (Adopted ISO/IEC 15961-4:2016, first edition, 2016-08-01) |
| ISO/IEC 18047-6:2017 | Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
| ISO/IEC 15962:2013 | Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions |
| ISO/IEC 7816-6:2016 | Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange |
| ISO/IEC 24753:2011 | Information technology — Radio frequency identification (RFID) for item management — Application protocol: encoding and processing rules for sensors and batteries |
| ISO/IEC 29167-1:2014 | Information technology Automatic identification and data capture techniques Part 1: Security services for RFID air interfaces |
| ISO/IEC 15963:2009 | Information technology Radio frequency identification for item management Unique identification for RF tags |
| ISO/IEC 15961:2004 | Information technology Radio frequency identification (RFID) for item management Data protocol: application interface |
| ISO/IEC 18000-7:2014 | Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| ISO/IEC 29143:2011 | Information technology — Automatic identification and data capture techniques — Air interface specification for Mobile RFID interrogators |
| ISO/IEC 13239:2002 | Information technology Telecommunications and information exchange between systems High-level data link control (HDLC) procedures |
| ISO/IEC 18000-2:2009 | Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz |
| ISO/IEC 18000-4:2015 | Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz |
| ISO/IEC 18046-3:2012 | Information technology Radio frequency identification device performance test methods Part 3: Test methods for tag performance |
| EN 302 208-2 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| IEEE 1588-2008 REDLINE | IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems |
| IEEE 1451.7-2010 | IEEE Standard for Smart Transducer Interface for Sensors and Actuators--Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats |
| ISO/IEC 18000-1:2008 | Information technology Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized |
| EN 302 208-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 1: TECHNICAL REQUIREMENTS AND METHODS OF MEASUREMENT |
| ISO/IEC 18000-3:2010 | Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.