ISO/IEC 17021:2011
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Conformity assessment Requirements for bodies providing audit and certification of management systems
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
03-20-2019
Superseded by
Language(s)
English, French, Spanish, Castilian
Published date
01-31-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/IEC 17021:2011 contains principles and requirements for the competence, consistency and impartiality of the audit and certification of management systems of all types (e.g. quality management systems or environmental management systems) and for bodies providing these activities. Certification bodies operating to ISO/IEC 17021:2011 need not offer all types of management system certification.
Certification of management systems is a third-party conformity assessment activity. Bodies performing this activity are therefore third-party conformity assessment bodies.
| DevelopmentNote |
Supersedes ISO/IEC GUIDE 62 and ISO/IEC GUIDE 66 (09/2006)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST R ISO/IEC 17021 : 2012 | Identical |
| NBN EN ISO/IEC 17021 : 2011 | Identical |
| NEN EN ISO/IEC 17021 : 2011 | Identical |
| NS EN ISO/IEC 17021 : 2011 | Identical |
| I.S. EN ISO/IEC 17021:2011 | Identical |
| PN EN ISO/IEC 17021 : DEC 2011 | Identical |
| SN EN ISO/IEC 17021 : 2011 | Identical |
| UNI CEI EN ISO/IEC 17021 : 2011 | Identical |
| AS/NZS ISO/IEC 17021:2011 | Identical |
| UNE-EN ISO/IEC 17021:2011 | Identical |
| BS EN ISO/IEC 17021:2011 | Identical |
| CEI UNI EN ISO/IEC 17021 : 2011 | Identical |
| EN ISO/IEC 17021:2011 | Identical |
| NF EN ISO/IEC 17021 : 2011 | Identical |
| DIN EN ISO/IEC 17021:2011-07 | Identical |
| BIS IS/ISO/IEC 17021 : 2006 | Identical |
| I.S. EN ISO 19011:2011 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011) |
| 12/30236518 DC : 0 | BS ISO/IEC 27000 - INFORMATION SECURITY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| S.R. CEN/TS 12666-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| 11/30247943 DC : 0 | EN ISO/IEC 17065 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR CERTIFICATION BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES |
| UNE-ISO/IEC TS 17021-3:2014 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 3: Competence requirements for auditing and certification of quality management systems |
| DIN EN 15542:2008-06 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| PD ISO/IEC TS 17021-4:2013 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of event sustainability management systems |
| 03/307701 DC : DRAFT JUNE 2003 | ISO/IEC 17000 - CONFORMITY ASSESSMENT - GENERAL VOCABULARY |
| BS ISO 28004-3:2014 | Security management systems for the supply chain. Guidelines for the implementation of ISO 28000 Additional specific guidance for adopting ISO 28000 for use by medium and small businesses (other than marine ports) |
| UNI CEN/TS 13476-4 : 2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD ISO/TR 12859:2009 | Intelligent transport systems. System architecture. Privacy aspects in ITS standards and systems |
| UNI CEN/TR 16017 : 2010 | GUIDE TO THE USE OF EN 598 |
| DD ISO/PAS 28004:2006 | Security management systems for the supply chain. Guidelines for the implementation of ISO/PAS 28000 |
| 14/30272915 DC : 0 | BS ISO 18400-106 - SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE |
| BS ISO 20858:2007 | Ships and marine technology. Maritime port facility security assessments and security plan development |
| 11/30250685 DC : 0 | ISO/IEC DTS 17022 - CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS |
| CSA ISO/IEC 27000 : 2018 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| 15/30319488 DC : 0 | BS ISO/IEC 27000 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| DD CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity |
| CEI UNI EN ISO/IEC 17067 : 2013 | CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES |
| CEI EN 61400-22 : 2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| BS EN 9104-003:2010 | Aerospace series. Quality management systems Requirements for aerospace quality management system (AQMS) auditor training and qualification |
| UNI CEI 70016 : 2008 | CONFORMITY ASSESSMENT - CODE OF GOOD PRACTICE |
| BS ISO 12576-2:2008 | Thermal insulation products. Conformity control systems In-situ products |
| UNI CEN/TS 14632 : 2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITTY |
| PD ISO/IEC TR 20000-5:2013 | Information technology. Service management Exemplar implementation plan for ISO/IEC 20000-1 |
| PD ISO/IEC TR 20000-3:2009 | Information technology. Service management Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| UNE-ISO/IEC TS 17021-2:2013 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems. Part 2: Competence requirements for auditing and certification of environmental management systems |
| ISO/IEC TS 17027:2014 | Conformity assessment — Vocabulary related to competence of persons used for certification of persons |
| I.S. EN ISO/IEC 17050-1:2010 | CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO/IEC 80079-34:2012-03 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011) |
| 13/30278879 DC : 0 | BS ISO/IEC DTS 17023 - CONFORMITY ASSESSMENT - GUIDELINES FOR DETERMINING DURATION OF MANAGEMENT SYSTEM CERTIFICATION AUDITS |
| PD CEN/TS 1453-2:2017 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| 13/30283149 DC : 0 | BS EN 9104-002 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEMREGISTRATION/CERTIFICATION PROGRAMS |
| DD CEN/TS 13476-4:2008 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| PD CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity |
| ISO 19011:2011 | Guidelines for auditing management systems |
| PD ISO/IEC TR 17026:2015 | Conformity assessment. Example of a certification scheme for tangible products |
| CEI UNI 70018 : 2009 | CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| S.R. CEN/TS 1455-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNI CEN/TS 1455-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| CEI UNI ISO/IEC TS 17021-4 : 2014 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS |
| S.R. CEN/TS 12200-2:2017 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN ISO/IEC 17050-1:2010 | Conformity assessment. Suppliers declaration of conformity General requirements |
| CSA TELECOM ORGANIZATIONS PACKAGE : 2018 | CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR |
| CEI UNI 70019 : 2008 | CONFORMITY ASSESSMENT ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS |
| UNE-EN 9104-002:2017 | Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs |
| S.R. CEN ISO/TS 14441:2013 | HEALTH INFORMATICS - SECURITY AND PRIVACY REQUIREMENTS OF EHR SYSTEMS FOR USE IN CONFORMITY ASSESSMENT (ISO/TS 14441:2013) |
| CEN/TR 16017:2010 | Guide to the use of EN 598 |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| ISO/IEC 29110-3-2:2018 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-2: Conformity certification scheme |
| ISO/TR 12859:2009 | Intelligent transport systems System architecture Privacy aspects in ITS standards and systems |
| I.S. EN 15267-2:2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 2: INITIAL ASSESSMENT OF THE AMS MANUFACTURER'S QUALITY MANAGEMENT SYSTEM AND POST CERTIFICATION SURVEILLANCE FOR THE MANUFACTURING PROCESS |
| S.R. CEN/TS 1566-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| I.S. EN ISO/IEC 17067:2013 | CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES (ISO/IEC 17067:2013 (EQV)) |
| INCITS/ISO/IEC 27006 : 2012 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF INFORMATION SECURITY MANAGEMENT SYSTEMS |
| ISEA 125 : 2014 | CONFORMITY ASSESSMENT OF SAFETY AND PERSONAL PROTECTIVE EQUIPMENT |
| UNI CEI ISO/IEC 17007 : 2010 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| ISO 16919:2014 | Space data and information transfer systems — Requirements for bodies providing audit and certification of candidate trustworthy digital repositories |
| ISO/IEC TS 17022:2012 | Conformity assessment Requirements and recommendations for content of a third-party audit report on management systems |
| UNI EN 15267-1 : 2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES |
| S.R. CEN/TS 1329-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN ISO/IEC 27000:2017 | Information technology. Security techniques. Information security management systems. Overview and vocabulary |
| UNI EN ISO 19011 : 2012 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| UNI CEN ISO/TS 15877-7 : 2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNI CEN ISO/TS 22391-7 : 2012 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| XP ISO/IEC TS 17022 : 2012 XP | CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS |
| UNI CEN/TR 15545 : 2007 | GUIDE TO THE USE OF EN 545 |
| I.S. EN 9104-002:2016 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| ISO/IEC 27000:2018 | Information technology — Security techniques — Information security management systems — Overview and vocabulary |
| IECQ 03-4:2014 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 4: IECQ AVIONICS SCHEME - AVIONICS PARTS AND ASSEMBLY MANAGEMENT |
| NFPA 1801 : 2018 | THERMAL IMAGERS FOR THE FIRE SERVICE |
| NFPA 1953 : 2016 | PROTECTIVE ENSEMBLES FOR CONTAMINATED WATER DIVING |
| NFPA 1952 : 2015 | SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT |
| NFPA 1986 : 2017 | RESPIRATORY PROTECTION EQUIPMENT FOR TACTICAL AND TECHNICAL OPERATIONS |
| BS EN 13063-3:2007 | Chimneys. System chimneys with clay/ceramic flue liners Requirements and test methods for air flue system chimneys |
| BS EN 14901:2006 | Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods |
| I.S. EN 14901:2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity |
| DIN EN 13063-3:2007-10 | CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS |
| CEN/TS 1453-2:2017 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| CEN/CLC ISO/IEC/TS 17021-3:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013) |
| CEN/TS 12666-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity |
| CEN/TS 13476-4:2013 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity |
| CEN/TR 16626:2014 | Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures |
| CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for assessment of conformity |
| CEN/CLC ISO/IEC/TS 17021-2:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC/TS 17021-2:2012) |
| CEN/TS 1455-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity |
| EN ISO/IEC 17050-1:2010 | Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) |
| UNI CEN/TS 1452-7 : 2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN ISO/TS 22391-7:2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011) |
| BS ISO 28004-1:2007 | Security management systems for the supply chain. Guidelines for the implementation of ISO 28000 |
| PD ISO/PAS 28007:2012 | Ships and marine technology. Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) |
| NASA CCSDS 652.1-M : ISSUE 2 | REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF CANDIDATE TRUSTWORTHY DIGITAL REPOSITORIES |
| UNI CEI 70019 : 2008 | CONFORMITY ASSESSMENT - ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS |
| 13/30254361 DC : 0 | BS ISO 50003 - ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF ENERGY MANAGEMENT SYSTEMS |
| DIN ISO/IEC 27000:2015-12 (Draft) | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| EG 202 009-1 : 1.3.1 | USER GROUP; QUALITY OF TELECOM SERVICES; PART 1: METHODOLOGY FOR IDENTIFICATION OF INDICATORS RELEVANT TO THE USERS |
| 07/30161531 DC : 0 | BS ISO 28001 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - BEST PRACTICES FOR IMPLEMENTING SUPPLY CHAIN SECURITY, ASSESSMENTS AND PLANS - REQUIREMENTS AND GUIDANCE |
| 13/30282414 DC : 0 | ISO/IEC DTS 17021-4 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT |
| PD CEN/TR 15545:2006 | Guide to the use of EN 545 |
| BS ISO 16919:2014 | Space data and information transfer systems. Requirements for bodies providing audit and certification of candidate trustworthy digital repositories |
| PD CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity |
| 11/30218121 DC : 0 | BS EN 15085-1:2007/A1 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL |
| PREN 681-1 : DRAFT 2016 | ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| PD CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity |
| PD CEN/CLC ISO/IEC TS 17021-3:2016 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of quality management systems |
| BS EN ISO/IEC 80079-34:2011 | Explosive atmospheres Application of quality systems for equipment manufacture |
| ISO/IEC TR 20000-3:2009 | Information technology — Service management — Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| BS EN 3-10:2009 | Portable fire extinguishers Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| UNI CEI ISO/IEC TS 17021-2 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
| ISO/IEC TS 17021-5:2014 | Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 5: Competence requirements for auditing and certification of asset management systems |
| PD ISO/IEC TS 17021-6:2014 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of business continuity management systems |
| PD CEN/CLC ISO/IEC TS 17021-2:2016 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of environmental management systems |
| 10/30217031 DC : 0 | EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| UNE-ISO/IEC TS 17027:2015 | Conformity assessment -- Vocabulary related to competence of persons used for certification of persons |
| TR 101 533-2 : 1.3.1 | ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI); DATA PRESERVATION SYSTEMS SECURITY; PART 2: GUIDELINES FOR ASSESSORS |
| PD CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity |
| PD CEN/TR 16626:2014 | Vitrified clay pipe systems for drains and sewers. Guidance for voluntary third-party certification procedures |
| UNI EN 15542 : 2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| PD ISO/IEC TS 17021-7:2014 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of road traffic safety management systems |
| BS ISO/IEC 27000 : 2016 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| 13/30284691 DC : 0 | BS ISO/IEC 27000 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| BS ISO 28007-1:2015 | Ships and marine technology. Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) General |
| 14/30294800 DC : 0 | BS EN 14901 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 1519-2 : 2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS ISO 18400-106:2017 | Soil quality. Sampling Quality control and quality assurance |
| SAE AS 9104/2A : 2014 | REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| CEI UNI EN ISO/IEC 17050-1 : 2010 | CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| BS ISO/IEC 20000-3:2012 | Information technology. Service management Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| UNI CEN/TS 12666-2 : 2012 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 9104-003:2010 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION |
| TS 119 403 : 2.2.1 | ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI); TRUST SERVICE PROVIDER CONFORMITY ASSESSMENT - REQUIREMENTS FOR CONFORMITY ASSESSMENT BODIES ASSESSING TRUST SERVICE PROVIDERS |
| ISO/IEC Guide 53:2005 | Conformity assessment Guidance on the use of an organization's quality management system in product certification |
| S.R. CWA 15896-2:2008 | VALUE ADDED PURCHASING MANAGEMENT - PART 2: ACCREDITED STRUCTURE AND PROCESS FOR CERTIFICATION BODIES |
| S.R. CEN/TS 1452-7:2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CWA 16275:2011 | GUIDELINES FOR THE SELECTION OF CONSULTANTS ADVISING SMES ON INTEGRATED QUALITY, ENVIRONMENT, HEALTH AND SAFETY MANAGEMENT SYSTEMS |
| I.S. EN ISO/IEC 80079-34:2011 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| I.S. EN ISO/IEC 17065:2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES (ISO/IEC 17065:2012) |
| S.R. CEN/TS 14632:2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DIN EN ISO/IEC 17000:2005-03 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| EN ISO 19011:2011 COR 2011 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011) |
| UNE-ISO/IEC TS 17021-7:2018 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 7: Competence requirements for auditing and certification of road traffic safety management systems |
| UNI CEN/TS 1329-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNI CEN ISO/TS 14441 : 2014 | HEALTH INFORMATICS - SECURITY AND PRIVACY REQUIREMENTS OF HER SYSTEMS FOR USE IN CONFORMITY ASSESSMENT |
| CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011) |
| DD CEN ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity |
| UNI CEI ISO/IEC TS 17021-3 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEM |
| ISO/IEC TR 17026:2015 | Conformity assessment Example of a certification scheme for tangible products |
| CEI UNI EN ISO/IEC 17065 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES |
| IECQ 03-3:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME |
| UNE-ISO/IEC TS 17021-6:2018 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 6: Competence requirements for auditing and certification of business continuity management systems |
| NFPA 1992 : 2018 | LIQUID SPLASH-PROTECTIVE ENSEMBLES AND CLOTHING FOR HAZARDOUS MATERIALS EMERGENCIES |
| CEI UNI EN ISO/IEC 17000 : 2011 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| IECQ 03-8:2015 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 8: IECQ SCHEME FOR LED LIGHTING |
| IECQ 03-3-1:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 3-1: IECQ APPROVED COMPONENT PRODUCTS, RELATED MATERIALS & ASSEMBLIES SCHEME, IECQ APPROVED COMPONENT-TECHNOLOGY CERTIFICATION (IECQ AC-TC) |
| DIN EN 1858:2016-08 (Draft) | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| DIN EN 598:2009-10 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
| BS EN 598 : 2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| ISO/IEC TS 17021-2:2012 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for auditing and certification of environmental management systems |
| DIN EN 14901:2014-12 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylen (PE) - Part 2: Guidance for the assessment of conformity |
| I.S. EN 1858:2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| I.S. EN 598:2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12446:2011 | CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| ONORM F 3070 : 2010 | PLANNING, DEVELOPMENT, INSTALLATION, COMMISSIONING AND MAINTENANCE OF FIRE DETECTION AND FIRE ALARM SYSTEMS AND OF FIRE CONTROL DEVICES |
| VDI 2870 Blatt 2:2013-02 | Lean production systems - List of methods |
| NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
| BS ISO 30003:2009 | Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management |
| CSA ISO/IEC 27007 : 2013 : R2017 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR INFORMATION SECURITY MANAGEMENT SYSTEMS AUDITING |
| DIN EN 16497-1:2015-05 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| UNI CEN/TS 1565-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DD CEN/TS 1852-2:2009 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
| 13/30279205 DC : 0 | BS EN 9101 - QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANISATIONS |
| ISO 18400-106:2017 | Soil quality — Sampling — Part 106: Quality control and quality assurance |
| DIN CEN/TS 1452-7;DIN SPEC 19675:2014-05 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| DIN EN 15267-2:2009-07 | Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer?s quality management system and post certification surveillance for the manufacturing process |
| ISO/PAS 28004:2006 | Security management systems for the supply chain Guidelines for the implementation of ISO/PAS 28000 |
| UNE-ISO/IEC TS 17021-5:2015 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 5: Competence requirements for auditing and certification of asset management systems |
| BS EN ISO/IEC 17000:2004 | Conformity assessment. Vocabulary and general principles |
| UNE-ISO/TS 22003:2015 | Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems |
| UNE-ISO/IEC 20000-3:2015 | Information technology. Service management. Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| I.S. EN 3-10:2009 | PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7 |
| 17/30289082 DC : 0 | BS ISO/IEC 29110-3-2 - SYSTEMS AND SOFTWARE ENGINEERING - LIFECYCLE PROFILES FOR VERY SMALL ENTITIES (VSES) - PART 3-2: CONFORMITY CERTIFICATION SCHEME |
| NFPA 1984 : 2016 | RESPIRATORS FOR WILDLAND FIRE-FIGHTING OPERATIONS |
| UNI CEI EN ISO/IEC 17065 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES |
| 12/30257208 DC : DRAFT FEB 2012 | BS ISO/IEC 20000-3 - INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1 |
| 08/30139611 DC : DRAFT JUNE 2008 | BS ISO/IEC 17007 - CONFORMITY ASSESSMENT - GUIDELINES FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| UNI CEN/TS 1566-2 : 2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - CHORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| BS EN 16497-1:2015 | Chimneys. Concrete System Chimneys Non-balanced flue applications |
| PD CEN/TS 1566-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for assessment of conformity |
| 14/30276392 DC : 0 | BS ISO 28007-1 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR PRIVATE MARITIME SECURITY COMPANIES (PMSC) PROVIDING PRIVATELY CONTRACTED ARMED SECURITY PERSONNEL (PCASP) ON BOARD SHIPS (AND PRO FORMA CONTRACT) |
| BS ISO 50003:2014 | Energy management systems. Requirements for bodies providing audit and certification of energy management systems |
| 12/30236911 DC : 0 | BS EN ISO/IEC 17067 - CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES |
| BS ISO/IEC 29110-3-2:2018 | Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs) Conformity certification scheme |
| S.R. CEN/TS 1565-2:2012 | PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - STYRENE-COPOLYMER BLENDS (SAN+PVC) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 12201-7:2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNE-EN 3-10:2010 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| 12/30271063 DC : 0 | PD ISO/IEC/TS 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| UNE-ISO 20858:2012 | Ships and marine technology. Maritime port facility security assessments and security plan development |
| UNE-ISO 28004:2014 | Security management systems for the supply chain. Guidelines for the implementation of ISO 28000 |
| DD ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Certification and accreditation requirements |
| PD CEN/TS 12201-7:2014 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Guidance for the assessment of conformity |
| 03/307737 DC : DRAFT JUNE 2003 | ISO/IEC 17050-1 - CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| S.R. CEN/TS 13598-3:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| UNE-ISO/IEC 17007:2010 | Conformity assessment. Guidance for drafting normative documents suitable for use for conformity assessment |
| PREN 9104-002 : 200P2 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| ISO 28004-3:2014 | Security management systems for the supply chain — Guidelines for the implementation of ISO 28000 — Part 3: Additional specific guidance for adopting ISO 28000 for use by medium and small businesses (other than marine ports) |
| XP CEN/CLC ISO/IEC/TS 17021-3 : 2016 XP | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| CEI UNI ISO/IEC 17007 : 2012 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| UNE-EN ISO/IEC 17067:2014 | Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC 17067:2013) |
| NFPA 1991 : 2016 | Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies |
| NFPA 1951 : 2013 | PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| I.S. EN ISO/IEC 27000:2017 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY (ISO/IEC 27000:2016) |
| S.R. CEN/CLC ISO/IEC/TS 17021-2:2016 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-2:2012) |
| UNI CEN/TS 1451-2 : 2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 9104-001:2013 | Aerospace series. Quality management systems Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| CEN ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2009) |
| S.R. CEN/TS 1519-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLEN (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO/IEC TS 17021-6:2014 | Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 6: Competence requirements for auditing and certification of business continuity management systems |
| ISO/PAS 30003:2008 | Ships and marine technology Ship recycling management systems Requirements for bodies providing audit and certification of ship recycling management |
| CSA ISO 19011 : 2012 : R2017 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| S.R. CEN ISO TS 21003-7:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity |
| UNE-ISO/IEC TS 17021-4:2015 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 4: Competence requirements for auditing and certification of event sustainability management systems |
| UNE-EN ISO/IEC 80079-34:2012 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture |
| OIML D 9 : 2004 | PRINCIPLES OF METROLOGICAL SUPERVISION |
| ISO 28007-1:2015 | Ships and marine technology — Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) — Part 1: General |
| ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) — Part 3: Global conformity assessment procedures (GCAP) — Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| ISO 28003:2007 | Security management systems for the supply chain Requirements for bodies providing audit and certification of supply chain security management systems |
| IECQ 03-7:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 7: IECQ COUNTERFEIT AVOIDANCE PROGRAMME (IECQ AP-CAP) - PROGRAMME REQUIREMENTS |
| IECQ 03-1:2012 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 1: GENERAL REQUIREMENTS FOR ALL IECQ SCHEMES |
| IECQ 03-5:2014 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PRODECURE - PART 5: IECQ HSPM SCHEME - HAZARDOUS SUBSTANCE PROCESS MANAGEMENT REQUIREMENTS |
| DIN EN 12446:2011-09 | Chimneys - Components - Concrete outer wall elements |
| DIN EN 1858:2011-09 | Chimneys - Components - Concrete flue blocks |
| OVE/ONORM EN 61400-22 : 2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION (IEC 61400-22:2010) |
| UNE-EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
| UNI EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI/TS 11465-1 : 2012 | ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI) - DATA PRESERVATION SYSTEMS SECURITY - PART 1: REQUIREMENTS FOR IMPLEMENTATION AND MANAGEMENT |
| UNI EN 14901 : 2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| UNI EN 1858 : 2012 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| UNI EN 598 : 2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI EN 12446 : 2011 | CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| I.S. EN ISO/IEC 17000:2004 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| UNI CEN/TS 12201-7 : 2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PD ISO/IEC Guide 67:2004 | Conformity asessment. Fundamentals of product certification |
| XP PREN 9101 : 2010 XP | QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS |
| CEI UNI ISO/IEC TS 17023 : 2016 | CONFORMITY ASSESSMENT - GUIDELINES FOR DETERMINING THE DURATION OF MANAGEMENT SYSTEM CERTIFICATION AUDITS |
| PREN 295-2 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| UNI CEI ISO/IEC TR 20000-3 : 2010 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1 |
| UNI EN 9104-003 : 2011 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION |
| PD ISO/IEC TS 17021-5:2014 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of asset management systems |
| 10/30162769 DC : DRAFT NOV 2010 | BS ISO/IEC 27007 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR INFORMATION SECURITY MANAGEMENT SYSTEMS AUDITING |
| BS EN ISO/IEC 17065:2012 | Conformity assessment. Requirements for bodies certifying products, processes and services |
| ISO 50003:2014 | Energy management systems Requirements for bodies providing audit and certification of energy management systems |
| 11/30247214 DC : 0 | BS EN 9104-001 - REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| ISO 28001:2007 | Security management systems for the supply chain Best practices for implementing supply chain security, assessments and plans Requirements and guidance |
| CSA A660 : 2010 | CERTIFICATION OF MANUFACTURERS OF STEEL BUILDING SYSTEMS |
| UNI CEI ISO/IEC TS 17021-4 : 2014 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 4: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF EVENT SUSTAINABILITY MANAGEMENT SYSTEMS |
| CSA INFORMATION SECURITY PACKAGE : 2018 | CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION |
| 11/30240198 DC : 0 | BS ISO 16919 - SPACE DATA AND INFORMATION TRANSFER SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF CANDIDATE TRUSTWORTHY DIGITAL REPOSITORIES |
| PD CEN/TS 1452-7:2014 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| 10/30216987 DC : 0 | BS EN 295-2 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| UNE-CEN/TS 1453-2:2017 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| BIP 0071 : 2014 | GUIDELINES ON REQUIREMENTS AND PREPARATION FOR ISMS CERTIFICATION BASED ON ISO/IEC 27001 |
| PD CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| CEI UNI ISO/IEC TR 20000-3 : 2011 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 3: GUIDANCE ON SCOPE DEFINITION AND APPLICABILITY OF ISO/IEC 20000-1 |
| SR 003 091 : 1.1.2 | ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI); RECOMMENDATIONS ON GOVERNANCE AND AUDIT REGIME FOR CAB FORUM EXTENDED VALIDATION AND BASELINE CERTIFICATES |
| 11/30246891 DC : 0 | BS ISO/IEC 27006 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF INFORMATION SECURITY MANAGEMENT SYSTEMS |
| BS ISO 28003:2007 | Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems |
| UNE-ISO 28003:2014 | Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems |
| UNI CEN ISO/TS 21003-7 : 2010 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 15267-1:2009 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES |
| PD CEN/TS 1519-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylen (PE) Guidance for the assessment of conformity |
| PD ISO/IEC TS 17023:2013 | Conformity assessment. Guidelines for determining the duration of management system certification audits |
| DD ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| NFPA 1971:2018 | Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting |
| 14/30304113 DC : 0 | BS EN 16497-2 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 2: BALANCED FLUE APPLICATIONS |
| BIS IS/ISO 19011 : 2011(R2016) | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| PD ISO/IEC TR 15443-1:2012 | Information technology. Security techniques. Security assurance framework Introduction and concepts |
| UNI CEI EN ISO/IEC 17000 : 2005 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| BS EN 15542:2008 | Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods |
| UNE-EN ISO/IEC 17065:2012 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
| CSA ISO 19011 : 2012 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| BS EN ISO 19011:2011 | Guidelines for auditing management systems |
| S.R. CEN/TR 16626:2014 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - GUIDANCE FOR VOLUNTARY THIRD-PARTY CERTIFICATION PROCEDURES |
| 07/30156249 DC : 0 | BS EN 12446 - CHIMNEYS - COMPONENTS - CONCRETE OUTER WALL ELEMENTS |
| 07/30156246 DC : 0 | BS EN 1858 - CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| UNI CEN/TS 13598-3 : 2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNI EN 3-10 : 2010 | PORTABLE FIRE EXTINGUISHERS - PART 10: PROVISIONS FOR EVALUATING THE CONFORMITY OF A PORTABLE FIRE EXTINGUISHER TO EN 3-7 |
| ISO 12576-2:2008 | Thermal insulation products — Conformity control systems — Part 2: In-situ products |
| NFPA 1994 : 2018 | PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS |
| CSA ISO/IEC TR 20000-5 : 2015 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 5: EXEMPLAR IMPLEMENTATION PLAN FOR ISO/IEC 20000-1 |
| UNE-ISO/IEC 27000:2014 | Information technology -- Security techniques -- Information security management systems -- Overview and vocabulary |
| UNE-EN 9104-001:2013 | Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| UNI ISO/TS 22003 : 2014 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF FOOD SAFETY MANAGEMENT SYSTEMS |
| 16/30318653 DC : 0 | BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| CEI UNI EN ISO/IEC 80079-34 : 2013 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| S.R. CEN/TS 1453-2:2017 | PLASTICS PIPING SYSTEMS WITH STRUCTURED WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 13476-4:2013 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNI CEI 70018 : 2009 | CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| CSA ISO/IEC TR 15443-1 : 2015 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SECURITY ASSURANCE FRAMEWORK - PART 1: INTRODUCTION AND CONCEPTS |
| ISO 20858:2007 | Ships and marine technology — Maritime port facility security assessments and security plan development |
| I.S. EN 9101:2015 | QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANIZATIONS |
| ISO/TR 14639-2:2014 | Health informatics Capacity-based eHealth architecture roadmap Part 2: Architectural components and maturity model |
| BS EN 9104-002:2016 | Aerospace series. Quality management systems Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs |
| NFPA 1981 : 2013 | OPEN-CIRCUIT SELF-CONTAINED BREATHING APPARATUS (SCBA) FOR EMERGENCY SERVICES |
| UNE-ISO/IEC TR 20000-3:2011 IN | Information technology. Service management. Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| PREN 14901 : DRAFT 2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| ISO/PAS 28001:2006 | Security management systems for the supply chain Best practices for implementing supply chain security Assessments and plans |
| EN 9101:2018 | Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations |
| ISO/IEC TR 15443-1:2012 | Information technology Security techniques Security assurance framework Part 1: Introduction and concepts |
| ISO/IEC Guide 67:2004 | Conformity assessment Fundamentals of product certification |
| I.S. EN 15542:2008 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| ISO/IEC 80079-34:2011 | Explosive atmospheres Part 34: Application of quality systems for equipment manufacture |
| BS EN 1858 : 2008 | CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
| UNE-EN 14901:2015 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
| UNE-EN 12446:2012 | Chimneys - Components - Concrete outer wall elements |
| EN ISO/IEC 80079-34:2011 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
| ISO/IEC 17065:2012 | Conformity assessment — Requirements for bodies certifying products, processes and services |
| ISO/IEC 20000-3:2012 | Information technology Service management Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 |
| ISO/IEC TS 17021-3:2013 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for auditing and certification of quality management systems |
| ISO/TS 14441:2013 | Health informatics — Security and privacy requirements of EHR systems for use in conformity assessment |
| UNE-EN 1858:2011 | Chimneys - Components - Concrete flue blocks |
| ISO/IEC TR 20000-5:2013 | Information technology Service management Part 5: Exemplar implementation plan for ISO/IEC 20000-1 |
| EN ISO/IEC 27000:2017 | Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) |
| CEN/TS 1401-2:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity |
| ISO/IEC 17050-1:2004 | Conformity assessment Supplier's declaration of conformity Part 1: General requirements |
| BS EN 9104:2006 | Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs |
| CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity |
| EN 15267-2:2009 | Air quality - Certification of automated measuring systems - Part 2: Initial assessment of the AMS manufacturer’s quality management system and post certification surveillance for the manufacturing process |
| EN 9104-002:2016 | Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs |
| CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene-copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity |
| EN 9104:2006 | Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs |
| EN 9104-003:2010 | Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification |
| EN 1858:2008+A1:2011 | Chimneys - Components - Concrete flue blocks |
| EN ISO/IEC 17067:2013 | Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC 17067:2013) |
| EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
| EN 3-10:2009 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| EN 15542:2008 | Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods |
| EN 16497-1:2015 | Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applications |
| EN 15267-1:2009 | Air quality - Certification of automated measuring systems - Part 1: General principles |
| EN 14901:2014 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| I.S. CEN TR 15545:2006 | GUIDE TO THE USE OF EN 545 |
| PD CEN/TR 16017:2010 | Guide to the use of EN 598 |
| UNE-ISO/IEC TS 17023:2014 | Conformity assessment -- Guidelines for determining the duration of management system certification audits |
| 12/30266154 DC : 0 | BS EN 16497-1 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| BS ISO 28001:2007 | Security management systems for the supply chain. Best practices for implementing supply chain security, assessments and plans. Requirements and guidance |
| NF EN 61400-22:2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| UNE-EN 9104-003:2011 | Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification |
| I.S. EN 16497-1:2015 | CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
| DIN EN 3-10:2010-03 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| ISO/PAS 28003:2006 | Security management systems for the supply chain - Requirements for bodies providing audit and certification of supply chain security management systems |
| PD CEN/TS 14632:2012 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity |
| CSA A660 : 2010 : INC : UPD 1 : 2010 : R2014 | CERTIFICATION OF MANUFACTURERS OF STEEL BUILDING SYSTEMS |
| BS ISO 28004 : 2007 | SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - GUIDELINES FOR THE IMPLEMENTATION OF ISO 28000 |
| BS PD ISO/IEC TS 17021-2 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
| CSA ISO/IEC 27007 : 2013 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR INFORMATION SECURITY MANAGEMENT SYSTEMS AUDITING |
| BS EN 9101:2015 | Quality Management Systems. Audit Requirements for Aviation, Space, and Defence Organisations |
| UNE-CEN/CLC ISO/IEC/TS 17021-2:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC/TS 17021-2:2012) |
| BS EN 15267-2:2009 | Air quality. Certification of automated measuring systems Initial assessment of the AMS manufacturer\'s quality management system and post certification surveillance for the manufacturing process |
| PD ISO/TR 14639-2:2014 | Health informatics. Capacity-based eHealth architecture roadmap Architectural components and maturity model |
| UNI CEI EN ISO/IEC 17067 : 2013 | CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES |
| PD CEN ISO/TS 14441:2013 | Health informatics. Security and privacy requirements of EHR systems for use in conformity assessment |
| ISO/TS 21003-7:2008 | Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity |
| UNE-CEN/CLC ISO/IEC/TS 17021-3:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013) |
| BS PD ISO/IEC TS 17021-3 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| PD CEN/TS 1565-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene-copolymer blends (SAN+PVC) Guidance for the assessment of conformity |
| PD ISO/TS 22003:2013 | Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems |
| PD ISO/IEC Guide 53:2005 | Conformity assessment. Guidance on the use of an organization\'s quality management system in product certification |
| BS 8500-2(2015) : 2015 | CONCRETE - COMPLEMENTARY BRITISH STANDARD TO BS EN 206 - PART 2: SPECIFICATION FOR CONSTITUENT MATERIALS AND CONCRETE |
| 06/30148917 DC : DRAFT MAY 2006 | |
| DD CEN ISO/TS 21003-7 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| NFPA 1975 : 2014 | EMERGENCY SERVICES WORK CLOTHING ELEMENTS |
| DD ISO/PAS 30003:2008 | Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management |
| DD ISO/PAS 28001:2006 | Security management systems for the supply chain. Best practices for implementing supply chain security. Assessments and plans |
| BS EN 15267-1:2009 | Air quality. Certification of automated measuring systems General principles |
| UNI/TR 11465-2 : 2012 | ELECTRONIC SIGNATURES AND INFRASTRUCTURES (ESI) - DATA PRESERVATION SYSTEMS SECURITY - PART 2: GUIDELINES FOR ASSESSORS |
| DIN EN 15267-1:2009-07 | Air quality - Certification of automated measuring systems - Part 1: General principles |
| PREN 9104-003 : 200P2 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) - AUDITOR TRAINING AND QUALIFICATION |
| PREN 9104-001 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| IECQ 03-2:2013 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ SYSTEM) - RULES OF PROCEDURE - PART 2: IECQ APPROVED PROCESS SCHEME |
| UNI CEI ISO/IEC TS 17022 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS |
| ANSI Z359.7 : 2011 | QUALIFICATION AND VERIFICATION TESTING OF FALL PROTECTION PRODUCTS |
| S.R. CEN/CLC/ISO/IEC/TS 17021-3:2016 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-3:2013) |
| S.R. CEN TR 16017:2010 | GUIDE TO THE USE OF EN 598 |
| ISO 30003:2009 | Ships and marine technology — Ship recycling management systems — Requirements for bodies providing audit and certification of ship recycling management |
| ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 7: Guidance for the assessment of conformity |
| EG 202 009-2 : 1.3.1 | USER GROUP; QUALITY OF TELECOM SERVICES; PART 2: USER RELATED INDICATORS ON A SERVICE SPECIFIC BASIS |
| S.R. CEN/TS 1451-2:2012 | PLASTIC PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| S.R. CEN/TS 1401-2:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| DD ISO/PAS 28003:2006 | Security management systems for the supply chain. Requirements for bodies providing audit and certification of supply chain security management systems |
| ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) — Part 4: Global conformity assessment procedures (GCAP) — Certification and accreditation requirements |
| PD CEN/TS 1329-2:2012 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| ISO/IEC Guide 60:2004 | Conformity assessment Code of good practice |
| UNE-EN 9101:2016 | Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations |
| ISO 8539:2009 | Forged steel lifting components for use with Grade 8 chain |
| UNI CEI EN ISO/IEC 17050-1 : 2010 | CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 9104-001:2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| UNI EN 9104-001 : 2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| NF EN 9104-002 : 2017 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| UNI CEI EN ISO/IEC 80079-34 : 2012 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| ISO/IEC TS 17021-4:2013 | Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 4: Competence requirements for auditing and certification of event sustainability management systems |
| UNI CEN/TS 1401-2 : 2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGRONUD DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| CEN/TR 15545:2006 | Guide to the use of EN 545 |
| UNE-EN ISO 19011:2012 | Guidelines for auditing management systems (ISO 19011:2011) |
| ISO/IEC 17007:2009 | Conformity assessment — Guidance for drafting normative documents suitable for use for conformity assessment |
| EN ISO/IEC 17000:2004 | Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004) |
| ISO/TS 13131:2014 | Health informatics Telehealth services Quality planning guidelines |
| I.S. EN 61400-22:2011 | WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION |
| ISO/TS 22003:2013 | Food safety management systems Requirements for bodies providing audit and certification of food safety management systems |
| S.R. CEN ISO TS 15877-7:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| IEEE 1680.1-2009 | IEEE Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays |
| DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 12446:2011 | Chimneys. Components. Concrete outer wall elements |
| IEC 61400-22:2010 | Wind turbines - Part 22: Conformity testing and certification |
| BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
| CEN/TS 1451-2:2012 | Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity |
| CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| EN 13063-3:2007 | Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys |
| EN 12446:2011 | Chimneys - Components - Concrete outer wall elements |
| EN ISO/IEC 17065:2012 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
| CEN/TS 1452-7:2014 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
| CEN/TS 12201-7:2014 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| ISO 19011:2011 | Guidelines for auditing management systems |
| ISO/IEC 27006:2015 | Information technology — Security techniques — Requirements for bodies providing audit and certification of information security management systems |
| ISO/IEC 17030:2003 | Conformity assessment General requirements for third-party marks of conformity |
| ISO/TS 22003:2013 | Food safety management systems Requirements for bodies providing audit and certification of food safety management systems |
| ISO 10002:2014 | Quality management Customer satisfaction Guidelines for complaints handling in organizations |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO/IEC Guide 28:2004 | Conformity assessment Guidance on a third-party certification system for products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.