ISO Guide 30:2015
Current
Current
The latest, up-to-date edition.
Reference materials — Selected terms and definitions
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
02-06-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO Guide 30:2015 recommends terms and definitions that should be assigned to them when used in connection with reference materials, with particular attention to terms that are used in reference material certificates and corresponding certification reports.
| Committee |
ISO/TC 334
|
| DocumentType |
Guide
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PD ISO GUIDE 30:2015 | Identical |
| FD ISO/GUIDE 30 : 2015 FD | Identical |
| SA HB 19.30:2018 | Identical |
| UNE 82130:2003 IN | Identical |
| PKN ISO GUIDE 30 : 2018 | Identical |
| ASTM D 6362 : 1998 : R2003 | Standard Practice for Certificates of Reference Materials for Water Analysis |
| FD ISO GUIDE 34 : 2010 FD | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| ISO 5-1:2009 | Photography and graphic technology Density measurements Part 1: Geometry and functional notation |
| PD 6532-5:1997 | Reference materials. Guide to the contents of certificates of reference materials Quality system guidelines for the production of reference materials |
| BS ISO 16042:2007 | Iron ores. Guidelines for the use of certified reference materials (CRMs) |
| 11/30199166 DC : 0 | BS ISO 11952 - SURFACE CHEMICAL ANALYSIS - SCANNING PROBE MICROSCOPY - DETERMINATION OF GEOMETRIC QUANTITIES USING SPM - CALIBRATION OF MEASURING SYSTEMS |
| OIML D 18 : 2008 | THE USE OF CERTIFIED REFERENCE MATERIALS IN FIELDS COVERED BY METROLOGICAL CONTROL EXERCISED BY NATIONAL SERVICES OF LEGAL METROLOGY. BASIC PRINCIPLES |
| ISO 18115-1:2013 | Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy |
| BS ISO 14606:2015 | Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials |
| 13/30288139 DC : 0 | BS EN 15063-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) - PART 1: GUIDELINES TO THE ROUTINE METHOD |
| BS ISO 11074:2005 | Soil quality. Vocabulary |
| BS ISO 6107-2 : 2006 | WATER QUALITY - VOCABULARY - PART 2 |
| 08/30192855 DC : 0 | BS ISO 5-4 - PHOTOGRAPHY AND GRAPHIC TECHNOLOGY - SPECTRAL DENSITY MEASUREMENTS - PART 4: GEOMETRIC CONDITIONS FOR REFLECTION DENSITY |
| ISO/TS 19159-1:2014 | Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 1: Optical sensors |
| ISO/TR 16268:2009 | Surface chemical analysis Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation |
| PD CEN/TS 16827-2:2015 | Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for FFPE tissue Isolated proteins |
| I.S. EN ISO 11074:2015 | SOIL QUALITY - VOCABULARY (ISO 11074:2015) |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| 13/30213813 DC : 0 | BS EN ISO 16140-1 - MICROBIOLOGY OF FOOD AND ANIMAL FEED - METHOD VALIDATION - PART 1: VOCABULARY |
| ISO 6879:1995 | Air quality — Performance characteristics and related concepts for air quality measuring methods |
| BS ISO 11843-3:2003 | Capability of detection Methodology for determination of the critical value for the response variable when no calibration data are used |
| BS 7825-3.1:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties |
| BIS IS/ISO 15189 : 2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| 01/713866 DC : DRAFT OCT 2001 | PREN 12258-2 - ALUMINIUM AND ALUMINIUM ALLOYS - TERMS AND DEFINITIONS - PART 2: CHEMICAL ANALYSIS |
| BS ISO 14532 : 2001 AMD 15911 | NATURAL GAS - VOCABULARY |
| 08/30182372 DC : DRAFT JULY 2008 | BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| BS 7825-2:1996 | Calibration of rubber and plastics test equipment Calibration procedures |
| PD CEN/TS 16827-3:2015 | Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for FFPE tissue Isolated DNA |
| BS ISO 5-1:2009 | Photography and graphic technology. Density measurements Geometry and functional notation |
| ASTM E 131 : 2010 : R2015 | Standard Terminology Relating to Molecular Spectroscopy |
| ISO Guide 31:2015 | Reference materials — Contents of certificates, labels and accompanying documentation |
| BS 6068-2.91(2004) : 2004 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
| BS 7825-3.6:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Dimensional properties |
| PD CEN/TS 16835-1:2015 | Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for venous whole blood Isolated cellular RNA |
| BS ISO 22036:2008 | Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma-atomic emission spectrometry (ICP-AES) |
| ASTM D 6596 : 2000 : R2005 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
| BS ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| BS ISO 15790:2004 | Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty |
| UNE-ISO 7504:2016 | Gas analysis. Vocabulary |
| CSA ISO 10993-12 : 98(R2002) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - SAMPLE PREPARATION AND REFERENCE MATERIALS |
| ASTM D 6362 : 1998 : R2013 | Standard Practice for Certificates of Reference Materials for Water Analysis |
| ISO 11843-4:2003 | Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value |
| S.R. CEN/TS 16827-3:2015 | MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR FFPE TISSUE - PART 3: ISOLATED DNA |
| PREN 3976 : 200P1 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHOD - CHEMICAL ANALYSIS FOR THE DETERMINATION OF HYDROGEN CONTENT |
| 03/109441 DC : DRAFT JUNE 2003 | EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| XP T51 506 : 1990 XP | PLASTICS - THERMOSETTING - ANALYSIS BY LIQUID CHROMATOGRAPHY (HPLC) |
| PREN 15063-1 : DRAFT 2013 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) - PART 1: GUIDELINES TO THE ROUTINE METHOD |
| ASTM C 1297 : 2003 : R2011 | Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials |
| I.S. EN ISO 11133:2014 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO/DIS 11133:2012) |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| ISO/TS 19590:2017 | Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry |
| PD ISO/TS 19590:2017 | Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| S.R. CEN/TR 10350:2013 | ANALYSIS OF STEELS AND IRONS - INTERNAL LABORATORY PROCEDURE FOR CHECKING THE ACCURACY OF AN ANALYTICAL METHOD BY USING CERTIFIED REFERENCE MATERIALS |
| ASTM E 2972 : 2015 | Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials |
| ASTM D 7578 : 2015-06 | GUIDE FOR CALIBRATION REQUIREMENTS FOR ELEMENTAL ANALYSIS OF PETROLEUM PRODUCTS AND LUBRICANTS |
| CSA ISO 10012-1 : 0 | QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - PART 1: METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT |
| ASTM D 6792 : 2017 : REDLINE | Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories |
| I.S. EN ISO 15194:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| ASTM D 6568 : 2000 : R2006 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ASTM E 131 : 2010 | Standard Terminology Relating to Molecular Spectroscopy |
| ASTM C 1128 : 2018 : REDLINE | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
| DIN EN ISO 17294-1:2007-02 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| BS EN ISO 11885:2009 | Water quality. Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| BS EN ISO 10993-12:2012 | Biological evaluation of medical devices Sample preparation and reference materials |
| UNE-EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| BS EN 14662-4:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by thermal desorption and gas chromatography |
| ISO 17511:2003 | In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| I.S. EN ISO 15189:2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15) |
| CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| EN 12287 : 1999 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - DESCRIPTION OF REFERENCE MATERIALS |
| EN 62321-1:2013 | Determination of certain substances in electrotechnical products - Part 1: Introduction and overview |
| CEN/TS 16826-2:2015 | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 2: Isolated proteins |
| CEN/TS 16835-1:2015 | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA |
| CEN/TS 16827-3:2015 | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 3: Isolated DNA |
| EN 12258-2:2004 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| EN 1330-11:2007 | Non-destructive testing - Terminology - Terms used in X-ray diffraction from polycrystalline and amorphous materials |
| DIN EN ISO 148-3:2017-04 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| EN ISO 148-3:2016 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
| CEN/TS 16835-2:2015 | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 2: Isolated genomic DNA |
| UNI EN ISO 10993-12 : 2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| ASTM E 1724 : 1995 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
| I.S. EN ISO 15195:2003 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| BS ISO 11095:1996 | Linear calibration using reference materials |
| 17/30331313 DC : 0 | BS EN ISO 20186-2 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR VENOUS WHOLE BLOOD - PART 2: ISOLATED GENOMIC DNA CORRECT |
| ASTM E 1301 : 1995 : R2003 | Standard Guide for Proficiency Testing by Interlaboratory Comparisons (Withdrawn 2003) |
| ASTM E 1301 : 1995 : EDT 1 | Standard Guide for Proficiency Testing by Interlaboratory Comparisons |
| 16/30326649 DC : 0 | BS EN ISO 20184-1 - MOLECULAR IN-VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR FROZEN TISSUE - PART 1: ISOLATED RNA |
| 15/30322609 DC : 0 | BS ISO 13655 - GRAPHIC TECHNOLOGY - SPECTRAL MEASUREMENT AND COLORIMETRIC COMPUTATION FOR GRAPHIC ARTS IMAGES |
| BS 7825-3.2:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Electrical properties |
| PD CEN/TS 16827-1:2015 | Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for FFPE tissue Isolated RNA |
| ASTM D 6596:2000 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
| ANSI CGATS/ISO 15790 : 2005(R2007) | GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY |
| 09/30179503 DC : DRAFT FEB 2009 | BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS GIVING A PERIODIC DIFFRACTION PATTERN |
| UNI EN 15842 : 2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| BS ISO 18158:2016 | Workplace air. Terminology |
| BS ISO 19017 : 2015 COR 2017 | GUIDANCE FOR GAMMA SPECTROMETRY MEASUREMENT OF RADIOACTIVE WASTE |
| 16/30331322 DC : 0 | BS EN ISO 20166-2 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATIONS PROCESSES FOR FORMALIN-FIXED AND PARAFFIN-EMBEDDED (FFPE) TISSUE - PART 2: ISOLATED PROTEINS |
| PD 6532-4:1992 | Reference materials. Guide to the contents of certificates of reference materials Guide to general and statistical principles for the certification of reference materials |
| GOST R ISO 6879 : 2005 | AIR QUALITY - PERFORMANCE CHARACTERISTICS AND RELATED CONCEPTS FOR AIR QUALITY MEASURING METHODS |
| UNI CEN/TR 10317 : 2009 | EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION |
| PD CEN/TS 16826-2:2015 | Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for snap frozen tissue Isolated proteins |
| ISO Guide 32:1997 | Calibration in analytical chemistry and use of certified reference materials |
| CEN/TS 16945:2016 | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma |
| DIN EN 15842:2010-06 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| 17/30349163 DC : 0 | BS ISO 20387 - BIOTECHNOLOGY - BIOBANKING - GENERAL REQUIREMENTS FOR BIOBANKING |
| EN ISO 17511:2003 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| 10/30216336 DC : 0 | BS ISO 13099-2 - COLLOIDAL SYSTEMS - METHODS FOR ZETA-POTENTIAL DETERMINATION - PART 2: OPTICAL METHODS |
| PD ISO GUIDE 35:2017 | Reference materials. Guidance for characterization and assessment of homogeneity and stability |
| BS ISO 13495:2013 | Foodstuffs. Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid |
| BS ISO 20481:2008 | Coffee and coffee products. Determination of the caffeine content using high performance liquid chromatography (HPLC). Reference method |
| BS EN ISO 18453:2005 | Natural gas. Correlation between water content and water dew point |
| BS ISO 16700:2004 | Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification |
| 07/30157023 DC : 0 | BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| I.S. EN ISO 17511:2003 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN BIOLOGICAL SAMPLES - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
| ISO 7504:2015 | Gas analysis Vocabulary |
| I.S. EN ISO 17034:2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016) |
| ASTM D 6596 : 2000 : R2016 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| BS ISO 11843-6:2013 | Capability of detection Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| ISO 13655:2017 | Graphic technology — Spectral measurement and colorimetric computation for graphic arts images |
| I.S. EN ISO 16140-1:2016 | MICROBIOLOGY OF THE FOOD CHAIN - METHOD VALIDATION - PART 1: VOCABULARY (ISO 16140-1:2016) |
| I.S. EN 62321-1:2013 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW (IEC 62321-1:2013 (EQV)) |
| ISO 20481:2008 | Coffee and coffee products — Determination of the caffeine content using high performance liquid chromatography (HPLC) — Reference method |
| UNE-EN ISO 16140-1:2016 | Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) |
| ISO 13495:2013 | Foodstuffs — Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid |
| ASTM D 6362 : 1998 : R2008 | Standard Practice for Certificates of Reference Materials for Water Analysis |
| ISO 18158:2016 | Workplace air Terminology |
| PREN ISO 15189 : DRAFT 2011 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| CSA ISO 10012-2 : 0 | QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES |
| NF ISO 16700 : 2006 | MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
| BS EN ISO 19017:2017 | Guidance for gamma spectrometry measurement of radioactive waste |
| UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| I.S. EN ISO 148-3:2016 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| ASTM E 2328 : 2004 | Standard Terminology Relating to Seized-Drug Analysis (Withdrawn 2005) |
| CR 13695-1:2000 | Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging |
| ASTM C 1297 : 2003 | Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials |
| DIN EN ISO 11133:2015-01 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO 11133:2014, CORRECTED VERSION 2014-11-01) |
| I.S. EN 14726:2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| DIN EN 15063-1:2015-03 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) - PART 1: GUIDELINES TO THE ROUTINE METHOD |
| DIN EN ISO 10993-12:2012-10 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| BS EN ISO 14532:2017 | Natural gas. Vocabulary |
| DIN EN 15079:2015-07 | COPPER AND COPPER ALLOYS - ANALYSIS BY SPARK OPTICAL EMISSION SPECTROMETRY (S-OES) |
| UNE-EN 196-2:2014 | Method of testing cement - Part 2: Chemical analysis of cement |
| UNE-EN ISO 15189:2013 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| I.S. EN 15063-1:2014 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) - PART 1: GUIDELINES TO THE ROUTINE METHOD |
| I.S. EN ISO 10993-8:2000 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
| I.S. EN 15079:2015 | COPPER AND COPPER ALLOYS - ANALYSIS BY SOURCE OPTICAL EMISSION SPECTROMETRY (S-OES) |
| I.S. EN ISO 14532:2017 | NATURAL GAS - VOCABULARY (ISO 14532:2014) |
| I.S. EN ISO 10993-12:2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
| I.S. EN ISO 11885:2009 | WATER QUALITY - DETERMINATION OF SELECTED ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| I.S. EN 196-2:2013 | METHODS OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
| DIN EN 196-2:2013-10 | METHODS OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
| DIN EN ISO 24276:2013-10 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS (ISO 24276:2006 + AMD 1:2013) |
| PD 6532-3:2000 | Reference materials. Guide to the contents of certificates of reference materials Guide to the uses of certified reference materials |
| PD 6532-2:2000 | Reference materials. Guide to the contents of certificates of reference materials Guide to the contents of certificates and labels of reference materials |
| PD 6532-5:2000 | Reference materials. Guide to the contents of certificates of reference materials General requirements for the competence of reference material producers |
| BS EN 62321-1:2013 | Determination of certain substances in electrotechnical products Introduction and overview |
| BS ISO 18115 : 2001 | SURFACE CHEMICAL ANALYSIS - VOCABULARY |
| 17/30346182 DC : 0 | BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS HAVING PERIODIC STRUCTURES |
| 07/30148930 DC : 0 | BS ISO 11843-5 - CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| PD ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| BS 7825-1:1995 | Calibration of rubber and plastics test equipment Specification for principles and general requirements |
| BS ISO 29581-2:2010 | Cement. Test methods Chemical analysis by X-ray fluorescence |
| 04/19973037 DC : DRAFT OCT 2004 | BS EN 1330-11 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 11: X-RAY DIFFRACTION FROM POLYCRYSTALLINE AND AMORPHOUS MATERIALS |
| 03/305268 DC : DRAFT APR 2003 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) FOR THE DETERMINATION OF ELEMENTS - PART 1: GENERAL GUIDELINES AND BASIC PRINCIPLES |
| PD CEN/TS 16945:2016 | Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma |
| DIN ISO 20481:2011-01 | Coffee and coffee products - Determination of the caffeine content using high performance liquid chromatography (HPLC) - Reference method (ISO 20481:2008) |
| UNE-EN ISO 17034:2017 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| 96/708815 DC : DRAFT JUN 1996 | IVM 2:1993 - INTERNATIONAL VOCABULARY OF BASIC AND GENERAL TERMS IN METROLOGY |
| ISO 20938:2008 | Instant coffee — Determination of moisture content — Karl Fischer method (Reference method) |
| ISO/TS 14167:2003 | Gas analysis General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
| 12/30198107 DC : 0 | BS EN ISO 11133 - MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA |
| BS EN ISO 16140-1:2016 | Microbiology of the food chain. Method validation Vocabulary |
| 11/30173018 DC : 0 | BS EN ISO 15189 - MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| 13/30247136 DC : 0 | BS EN ISO 11074 - SOIL QUALITY - VOCABULARY |
| 07/30174471 DC : 0 | BS ISO 13655 - GRAPHIC TECHNOLOGY - SPECTRAL MEASUREMENT AND COLORIMETRIC COMPUTATION FOR GRAPHIC ARTS IMAGES |
| ASTM E 1732 : 2017-09 | TERMINOLOGY RELATING TO FORENSIC SCIENCE |
| DIN ISO 18115-1:2016-09 (Draft) | SURFACE CHEMICAL ANALYSIS - VOCABULARY - PART 1: GENERAL TERMS AND TERMS USED IN SPECTROSCOPY (ISO 18115-1:2013) |
| PD 6461-1:1985 | Vocabulary of metrology Basic and general terms (international) |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| BS EN ISO 15194:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
| 08/30192173 DC : 0 | BS EN 62542 ED1 - ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - STANDARDIZATION OF ENVIRONMENTAL ASPECTS - GLOSSARY OF TERMS |
| UNI ISO 11843-6 : 2014 | CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUE IN POISSON DISTRIBUTED MEASUREMENTS BY NORMAL APPROXIMATIONS |
| 93/408219 DC : MAR 93 | BS 5781 QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT. PART 2: MEASUREMENT PROCESS CONTROL |
| PD CEN/TS 16826-1:2015 | Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for snap frozen tissue Isolated RNA |
| PD CEN/TS 16835-3:2015 | Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for venous whole blood Isolated circulating cell free DNA from plasma |
| BS EN ISO 11133 : 2014 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA |
| BS ISO 20938:2008 | Instant coffee. Determination of moisture content. Karl Fischer method (Reference method) |
| BS ISO 11843-4:2003 | Capability of detection Methodology for comparing the minimum detectable value with a given value |
| 03/105598 DC : DRAFT MAY 2003 | BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
| PD ISO/TS 14411-1:2017 | Preparation of particulate reference materials Polydisperse material based on picket fence of monodisperse spherical particles |
| PD CEN/TR 10317:2014 | European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
| BS ISO 13099-2:2012 | Colloidal systems. Methods for zetapotential determination Optical methods |
| 13/30255474 DC : 0 | BS ISO 7504 - GAS ANALYSIS - VOCABULARY |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| 04/30086456 DC : DRAFT APR 2004 | BS ISO 11074 - SOIL QUALITY - VOCABULARY |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| BS ISO 22412:2017 | Particle size analysis. Dynamic light scattering (DLS) |
| 16/30326643 DC : 0 | BS EN ISO 20166-1 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR FORMALIN-FIXED AND PARAFFIN-EMBEDDED (FFPE) TISSUE - PART 1: ISOLATED RNA |
| BS 7825-3.9:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Flammability characteristics |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| S.R. CEN/TS 16835-3:2015 | MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR VENOUS WHOLE BLOOD - PART 3: ISOLATED CIRCULATING CELL FREE DNA FROM PLASMA |
| ASTM F 1569 : 1994 : R1999 | Standard Guide for Generation of Consensus Reference Materials for Semiconductor Technology (Withdrawn 2003) |
| ASTM D 6568 : 2000 : R2011 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ISO 14606:2015 | Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials |
| ISO Guide 80:2014 | Guidance for the in-house preparation of quality control materials (QCMs) |
| UNI ISO 11095 : 2010 | LINEAR CALIBRATION USING REFERENCE MATERIALS |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| S.R. CEN/TS 16827-2:2015 | MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR FFPE TISSUE - PART 2: ISOLATED PROTEINS |
| S.R. CEN/TR 10317:2014 | EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION (ECISS) |
| ONORM EN 14726 : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| ISO/TS 14411-1:2017 | Preparation of particulate reference materials — Part 1: Polydisperse material based on picket fence of monodisperse spherical particles |
| ISO 15194:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| FD V03 115 : 96 FD | ANALYSIS OF AGRICULTURAL AND FOOD PRODUCTS - GUIDE FOR THE USE OF REFERENCE MATERIALS |
| BS EN 15842:2010 | Foodstuffs. Detection of food allergens. General considerations and validation of methods |
| UNI ISO 11843-2 : 2009 | CAPABILITY OF DETECTION - PART 2: METHODOLOGY IN THE LINEAR CALIBRATION CASE |
| ASTM D 6568 : 2000 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ASTM D 7911 : 2014 | Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
| ASTM D 6568 : 2000 : R2018 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| ISO 22036:2008 | Soil quality — Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP - AES) |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| BS EN ISO 15195:2003 | Laboratory medicine. Requirements for reference measurement laboratories |
| S.R. CR 13695-1:2000 | PACKAGING - REQUIREMENTS FOR MEASURING AND VERIFYING THE FOUR HEAVY METALS AND OTHER DANGEROUS SUBSTANCES PRESENT IN PACKAGING AND THEIR RELEASE INTO THE ENVIRONMENT - PART 1: REQUIREMENTS FOR MEASURING AND VERIFYING THE FOUR HEAVY METALS PRESENT IN PACKAGING |
| ISO 11095:1996 | Linear calibration using reference materials |
| ISO 18115:2001 | Surface chemical analysis Vocabulary |
| ISO 15195:2003 | Laboratory medicine Requirements for reference measurement laboratories |
| DIN EN ISO 15189:2014-11 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| BS EN 14726:2005 | Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis |
| BS EN ISO 17294-1:2006 | Water quality. Application of inductively coupled plasma mass spectrometry (ICP-MS) General guidelines |
| BS EN ISO 10993-8:2001 | Biological evaluation of medical devices Selection and qualification of reference materials for biological tests |
| BS EN 14662-1:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Pumped sampling followed by thermal desorption and gas chromatography |
| BS EN 12287:1999 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials |
| DIN EN ISO 21571:2013-08 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - NUCLEIC ACID EXTRACTION (ISO 21571:2005 + AMD 1:2013) |
| UNE-ISO 6107-2:2010 | Water quality. Vocabulary. Part 2. |
| EN ISO 6143:2006 | Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001) |
| EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| EN ISO 16140-1:2016 | Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) |
| EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| UNI EN ISO 21571 : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - NUCLEIC ACID EXTRACTION |
| UNI EN 196-2 : 2013 | METHOD OF TESTING CEMENT - PART 2: CHEMICAL ANALYSIS OF CEMENT |
| UNI EN ISO 24276 : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS |
| PD 6461-1:1995 | General metrology Basic and general terms (VIM) |
| BS 5233:1986 | Glossary of terms used in metrology (incorporating BS 2643) |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| UNI EN ISO 11885 : 2009 | WATER QUALITY - DETERMINATION OF SELECTED ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| UNI EN ISO 15189 : 2013 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| BIS IS/ISO/IEC GUIDE 43-1 : 1997 | PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS - GUIDELINES - PART 1: DEVELOPMENT AND OPERATION OF PROFICIENCY TESTING SCHEME |
| UNE-EN ISO 148-3:2017 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
| DIN EN ISO 148-3:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| ECA ILAC G19 : 2014 | MODULES IN A FORENSIC SCIENCE PROCESS |
| ISO 22412:2017 | Particle size analysis — Dynamic light scattering (DLS) |
| S.R. CEN/TS 16826-1:2015 | MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR SNAP FROZEN TISSUE - PART 1: ISOLATED RNA |
| 12/30271500 DC : 0 | BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
| BS ISO 18115-1:2013 | Surface chemical analysis. Vocabulary General terms and terms used in spectroscopy |
| 17/30345272 DC : 0 | BS ISO 14167 - GAS ANALYSIS - GENERAL QUALITY ASPECTS AND METROLOGICAL TRACEABILITY OF CALIBRATION GAS MIXTURES |
| ISO 11952:2014 | Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems |
| UNI ISO 11885 : 2009 | WATER QUALITY - DETERMINATION OF SELECTED ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| DIN EN ISO 15194:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| BS ISO 13655:2017 | Graphic technology. Spectral measurement and colorimetric computation for graphic arts images |
| DIN ISO 22036:2009-06 | Soil quality - Determination of trace elements in extracts of soil by inductively coupled plasma - atomic emission spectrometry (ICP-AES) (ISO 22036:2008) |
| BS 7755-1.2:1999 | Soil quality. Terminology and classification Terms and definitions relating to sampling |
| BS 7825-3.4:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of rubber |
| BS EN ISO 148-3:2016 | Metallic materials. Charpy pendulum impact test Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| CEN/TR 10350:2013 | Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials |
| BS DD260(2003) : 2003 | WATER QUALITY - ENUMERATION OF MICRO-ORGANISMS IN WATER SAMPLES - GUIDANCE ON THE ESTIMATION OF VARIATION OF RESULTS WITH PARTICULAR REFERENCE TO THE CONTRIBUTION OF UNCERTAINTY OF MEASUREMENT |
| CEN/TR 10317:2014 | European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
| 10/30229130 DC : 0 | BS EN 62321-1 ED 1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTRO TECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW |
| BS ISO 6879:1995 | Air quality. Performance characteristics and related concepts for air quality measuring methods |
| 14/30316056 DC : 0 | BS ISO/GUIDE 31 - REFERENCE MATERIALS - CONTENTS OF CERTIFICATES, LABELS AND ACCOMPANYING DOCUMENTATION |
| 15/30317578 DC : 0 | BS ISO 16700 - MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
| ISO 16700:2016 | Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification |
| BS 7825-3.10:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Conditioning, sample and test piece preparation |
| BS ISO 11323:2010 | Iron ore and direct reduced iron. Vocabulary |
| PREN 45001 : DRAFT 1997 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| BS 7825-3.3:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics |
| I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| ASTM D 6808 : 2002 : R2012 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| CEI EN 62321-1 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW |
| BS ISO 17294-1 : 2004 AMD 16802 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
| 14/30295796 DC : 0 | BS ISO 19017 - GUIDE FOR GAMMA SPECTROMETRY MEASUREMENT OF RADIOACTIVE WASTE |
| BS ISO 11843-2:2000 | Capability of detection Methodology in the linear calibration case |
| 06/30146511 DC : 0 | BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| BS ISO 17315:2014 | Petroleum products and other liquids. Ethanol. Determination of total acidity by potentiometric titration |
| UNI ISO 11843-4 : 2014 | CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
| 16/30331325 DC : 0 | BS EN ISO 20166-3 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE- EXAMINATION PROCESSES FOR FORMALIN-FIXED AND PARAFFIN-EMBEDDED (FFPE) TISSUE - PART 3: ISOLATED DNA |
| BS 7825-3.5:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties |
| NF ISO 11843-3 : 2003 | CAPABILITY OF DETECTION - PART 3: METHODOLOGY FOR DETERMINATION OF THE CRITICAL VALUE FOR THE RESPONSE VARIABLE WHEN NO CALIBRATION DATA ARE USED |
| PD ISO/TR 16268:2009 | Surface chemical analysis. Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation |
| UNI EN 3976 : 2008 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TEST METHOD - CHEMICAL ANALYSIS FOR THE DETERMINATION OF HYDROGEN CONTENT |
| S.R. CEN/TS 16945:2016 | MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR METABOLOMICS IN URINE, VENOUS BLOOD SERUM AND PLASMA |
| I.S. EN ISO 19017:2017 | GUIDANCE FOR GAMMA SPECTROMETRY MEASUREMENT OF RADIOACTIVE WASTE (ISO 19017:2015) |
| CEI UNI EN ISO 17034 : 1ED 2018 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| ISO 29301:2017 | Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures |
| CSA Z15189 : 2003 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| BS ISO 17034 : 2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| ISO 11323:2010 | Iron ore and direct reduced iron Vocabulary |
| PD CEN/TR 10350:2013 | Analysis of steels and irons. Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials |
| ASTM D 6362 : 1998 | Standard Practice for Certificates of Reference Materials for Water Analysis |
| ASTM D 6808 : 2002 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| ASTM D 6596 : 2000 : R2011 | Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials |
| ISO 11843-6:2013 | Capability of detection Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| ISO 19017:2015 | Guidance for gamma spectrometry measurement of radioactive waste |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO 18602:2013 | Packaging and the environment — Optimization of the packaging system |
| I.S. EN 15842:2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| DIN EN ISO 17511:2003-11 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| ISO 16042:2007 | Iron ores Guidelines for the use of certified reference materials (CRMs) |
| ISO 6107-2:2006 | Water quality Vocabulary Part 2: |
| UNE-EN 15063-1:2015 | Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method |
| BS EN 1330-11:2007 | Non-destructive testing. Terminology Terms used in X-ray diffraction from polycrystalline and amorphous materials |
| BS EN 12258-2:2004 | Aluminium and aluminium alloys. Terms and definitions Chemical analysis |
| ISO 10993-8:2000 | Biological evaluation of medical devices Part 8: Selection and qualification of reference materials for biological tests |
| ISO 6143:2001 | Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures |
| ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
| BS EN 14662-5:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by solvent desorption and gas chromatography |
| BS EN 15063-1:2014 | Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) Guidelines to the routine method |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| UNE-EN ISO 11133:2014 | Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media (ISO 11133:2014) |
| BS EN ISO 17511:2003 | In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials |
| IEC 62321:2008 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
| UNE-EN ISO 10993-12:2013 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| ISO 10993-12:2012 | Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
| ISO 21571:2005 | Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Nucleic acid extraction |
| UNE-EN 15079:2015 | Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES) |
| ISO 17294-1:2004 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| ISO 24276:2006 | Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products General requirements and definitions |
| BS EN ISO 6143:2006 | Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures |
| BS EN ISO 15189:2012 | Medical laboratories. Requirements for quality and competence |
| BS EN 14662-2:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Pumped sampling followed by solvent desorption and gas chromatography |
| ISO 17034:2016 | General requirements for the competence of reference material producers |
| ISO 16140-1:2016 | Microbiology of the food chain — Method validation — Part 1: Vocabulary |
| EN ISO 18453:2005 | Natural gas - Correlation between water content and water dew point (ISO 18453:2004) |
| EN 14662-4:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography |
| EN 15063-1:2014 | Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method |
| EN ISO 14111:1999 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
| EN 15079:2015 | Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES) |
| CEN/TS 16827-2:2015 | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 2: Isolated proteins |
| EN ISO 17034:2016 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| EN ISO 10993-8 : 2000 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 8: SELECTION AND QUALIFICATION OF REFERENCE MATERIALS FOR BIOLOGICAL TESTS |
| EN 14662-5:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography |
| EN 14662-2:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography |
| EN 15842:2010 | Foodstuffs - Detection of food allergens - General considerations and validation of methods |
| EN 3976:2006 | Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
| EN ISO 15194:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
| EN 14662-1:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography |
| EN ISO 17294-1:2006 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| PREN ISO 21572 : DRAFT 2010 | FOODSTUFFS - MOLECULAR BIOMARKER ANALYSIS - PROTEIN-BASED METHODS |
| EN ISO 19017:2017 | Guidance for gamma spectrometry measurement of radioactive waste (ISO 19017:2015) |
| BS EN ISO 17034:2016 | General requirements for the competence of reference material producers |
| PD CEN/TS 16835-2:2015 | Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for venous whole blood Isolated genomic DNA |
| ISO 11459:1997 | Iron ores — Certified reference materials — Preparation and certification for use in chemical analysis |
| DIN EN ISO 18113-1:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
| 11/30239628 DC : 0 | BS ISO 18602 - PACKAGING AND THE ENVIRONMENT - OPTIMIZATION OF THE PACKAGING SYSTEM |
| 09/30186154 DC : 0 | BS ISO 11323 - IRON ORE AND DIRECT REDUCED IRON - VOCABULARY |
| 17/30326658 DC : 0 | BS EN ISO 20186-1 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR VENOUS WHOLE BLOOD - PART 1: ISOLATED CELLULAR RNA |
| BS ISO 29301:2017 | Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures |
| BS 3156-11.0.3(1997) : 1997 AMD 10655 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
| PD CR 13695-1:2000 | Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment Requirements for measuring and verifying the four heavy metals present in packaging |
| 10/30180621 DC : 0 | BS EN ISO 21572 - FOODSTUFFS - MOLECULAR BIOMARKER ANALYSIS - PROTEIN-BASED METHODS |
| 12/30247157 DC : 0 | BS ISO 14532 - NATURAL GAS - VOCABULARY |
| BS EN 62321:2009 | Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
| DIN ISO 6143 E : 2004 | GAS ANALYSIS - COMPARISON METHODS FOR DETERMINING AND CHECKING THE COMPOSITION OF CALIBRATION GAS MIXTURES |
| 16/30331319 DC : 0 | BS EN ISO 20184-2 - MOLECULAR IN-VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR FROZEN TISSUE - PART 2: ISOLATED PROTEINS |
| BS 7825-3.11:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Rubber polymer identification and chemical properties |
| BS ISO 6143 : 2001 AMD 16904 | GAS ANALYSIS - COMPARISON METHODS FOR DETERMINING AND CHECKING THE COMPOSITION OF CALIBRATION GAS MIXTURES |
| PD ISO GUIDE 33:2015 | Reference materials. Good practice in using reference materials |
| BS 7825-3.7:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Rheological properties |
| EN ISO 10993-12:2012 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| ISO 11133:2014 | Microbiology of food, animal feed and water — Preparation, production, storage and performance testing of culture media |
| ASTM E 1775 : 2016 : REDLINE | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM D 7778 : 2015 : REDLINE | Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| 97/402277 DC : DRAFT APR 1997 | PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| NF ISO 11843-2 : 2000 | CAPABILITY OF DETECTION - PART 2: METHODOLOGY IN THE LINEAR CALIBRATION CASE |
| BS ISO 5-4:2009 | Photography and graphic technology. Density measurements Geometric conditions for reflection density |
| 00/565675 DC : DRAFT DEC 2000 | BS EN ISO 17511 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - METROLOGICAL TRACEABILITY OF VALUES ASSIGNED TO CALIBRATORS AND CONTROL MATERIALS |
| PD ISO GUIDE 31:2015 | Reference materials. Contents of certificates, labels and accompanying documentation |
| DIN EN ISO 18453:2006-01 | Natural gas - Correlation between water content and water dew point (ISO 18453:2004) |
| UNI EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| ISO 5-4:2009 | Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density |
| ISO 29581-2:2010 | Cement Test methods Part 2: Chemical analysis by X-ray fluorescence |
| I.S. EN 62321:2009 | ELECTROTECHNICAL PRODUCTS - DETERMINATION OF LEVELS OF SIX REGULATED SUBSTANCES (LEAD, MERCURY, CADMIUM, HEXAVALENT CHROMIUM, POLYBROMINATED BIPHENYLS, POLYBROMINATED DIPHENYL ETHERS) |
| ISO 18453:2004 | Natural gas — Correlation between water content and water dew point |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| S.R. CEN/TS 16827-1:2015 | MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR FFPE TISSUE - PART 1: ISOLATED RNA |
| ANSI/AAMI/ISO 10993-12:2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| S.R. CEN/TS 16826-2:2015 | MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR SNAP FROZEN TISSUE - PART 2: ISOLATED PROTEINS |
| ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| ISO 13099-2:2012 | Colloidal systems — Methods for zeta-potential determination — Part 2: Optical methods |
| S.R. CEN/TS 16835-1:2015 | MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR VENOUS WHOLE BLOOD - PART 1: ISOLATED CELLULAR RNA |
| BS ISO 7504:2015 | Gas analysis. Vocabulary |
| S.R. CEN/TS 16835-2:2015 | MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR VENOUS WHOLE BLOOD - PART 2: ISOLATED GENOMIC DNA |
| ISO 11843-3:2003 | Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
| UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| ASTM E 807 : 1996 | Practice for Metallographic Laboratory Evaluation (Withdrawn 2001) |
| ASTM E 1645 : 2016 : REDLINE | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM D 6808 : 2002 : R2007 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| NF EN 14726 : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| ASTM E 1724 : 1995 : R2001 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010) |
| ISO 17315:2014 | Petroleum products and other liquids — Ethanol — Determination of total acidity by potentiometric titration |
| EN ISO 15195:2003 | Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003) |
| ASTM E 1726 : 2016 : REDLINE | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| I.S. EN ISO 18453:2005 | NATURAL GAS - CORRELATION BETWEEN WATER CONTENT AND WATER DEW POINT |
| ISO 11074:2015 | Soil quality — Vocabulary |
| BS EN 196-2:2013 | Method of testing cement Chemical analysis of cement |
| ISO 148-3:2016 | Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| BS EN 3976:2006 | Aerospace series. Titanium and titanium alloys. Test method. Chemical analysis for the determination of hydrogen content |
| BS EN ISO 21571 : 2005 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - NUCLEIC ACID EXTRACTION |
| BS EN ISO 24276 : 2006 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - GENERAL REQUIREMENTS AND DEFINITIONS |
| BS EN 15079:2015 | Copper and copper alloys. Analysis by spark optical emission spectrometry (S-OES) |
| DIN EN 14662-4:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 4: DIFFUSIVE SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY |
| CEN/TS 16835-3:2015 | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma |
| DIN EN 14662-1:2005-08 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography |
| DIN EN 14726:2005-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| CEN/TS 16826-1:2015 | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 1: Isolated RNA |
| DIN EN ISO 11885:2009-09 | WATER QUALITY - DETERMINATION OF SELECTED ELEMENTS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| EN 62321:2009 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
| DIN EN 14662-5:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 5: DIFFUSIVE SAMPLING FOLLOWED BY SOLVENT DESORPTION AND GAS CHROMATOGRAPHY |
| DIN ISO 6143:2004-05 | GAS ANALYSIS - COMPARISON METHODS FOR DETERMINING AND CHECKING THE COMPOSITION OF CALIBRATION GAS MIXTURES |
| DIN EN ISO 15195:2004-01 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| DIN EN ISO 6143:2006-11 | Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001) |
| DIN EN 14662-2:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 2:PUMPED SAMPLING FOLLOWED BY SOLVENT DESORPTION AND GAS CHROMATOGRAPHY |
| CEN/TS 16827-1:2015 | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 1: Isolated RNA |
| I.S. EN ISO 17294-1:2006 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 1: GENERAL GUIDELINES |
| CEI UNI EN ISO 20387:2021 | Biotechnology - Biobanking - General requirements for biobanking (ISO 20387:2018) |
| BS 5781-1(1992) : AMD 8147 | QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT |
| NS-EN 14662-1:2023 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography |
| NS-EN 17917:2023 | Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of aluminium in aqueous extracts |
| I.S. EN 14662-1:2005 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 1: PUMPED SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| AS ISO 20387:2020 | Biotechnology - Biobanking - General requirements for biobanking |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 17511:2003 | In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| ISO Guide 31:2015 | Reference materials — Contents of certificates, labels and accompanying documentation |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| CLSI EP30 A : 1ED 2010 | CHARACTERIZATION AND QUALIFICATION OF COMMUTABLE REFERENCE MATERIALS FOR LABORATORY MEDICINE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.