ISO 965-3:1998
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
07-06-2021
Superseded by
Published date
12-20-1998
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This part of ISO 965 specifies deviations for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to ISO 261 having basic profile according to ISO 68-1.
The deviations specified are derived from the fundamental deviations and tolerances specified in ISO 965-1.
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN ISO 965-3:1999-11 | Identical |
| JIS B 0209-3:2001 | Identical |
| ONORM ISO 965-3 : 2012 | Identical |
| NBN EN 28736 : 1992 | Identical |
| NBN EN 28737 : 1992 | Identical |
| NBN EN 22857 : 1992 | Identical |
| NBN EN 24766 : 1992 | Identical |
| NBN EN 27434 : 1992 | Identical |
| NBN EN 27435 : 1992 | Identical |
| NBN EN 27436 : 1992 | Identical |
| NEN ISO 965-3 : 1999 C1 2009 | Identical |
| PN ISO 965-3 : 2001 AC 1 2018 | Identical |
| SNV ISO 965-3 : 1999 | Identical |
| SS-ISO 965-3 : 2003 | Identical |
| UNI ISO 965-3:2020 | Identical |
| BIS IS 14962-3 : 2001 AMD 1 2013 | Identical |
| BS ISO 965-3:1998 | Identical |
| NF ISO 965-3 : 1999 | Identical |
| DIN 13-27:1983-12 | Similar to |
| UNE 17709:2002 | Identical |
| UNE-EN ISO 7380-2:2012 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| DIN EN 22857:1990-07 | GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES; MANUFACTURING TOLERANCES ON THE THREADED PORTION |
| BS ISO 17447-1:2015 | Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for metal-sheath-type glow-plugs |
| BS EN ISO 4766:2011 | Slotted set screws with flat point |
| 04/30102972 DC : DRAFT SEP 2004 | BS ISO 19812 - ROAD VEHICLES - M10 X 1 COMPACT SPARK PLUGS WITH FLAT SEATING AND 16 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING |
| ISO 9401:1991 | Machine tools Jaw mountings on power chucks |
| 09/30202626 DC : 0 | BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| 16/30340613 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| I.S. EN 22857:1990 | GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES - MANUFACTURING TOLERANCES ON THE THREADED PORTION |
| GOST R 52350.1 : 2005 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D" |
| 12/30236938 DC : 0 | BS ISO 28741 - ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS |
| 05/30135570 DC : DRAFT NOV 2005 | ISO 2705 - ROAD VEHICLES - M12 X 1,25 SPARK PLUGS WITH FLAT SEATING AND THEIR CYLINDER HEAD HOUSINGS |
| DIN EN ISO 4766:2011-11 | Slotted set screws with flat point (ISO 4766:2011) |
| BS ISO 28741:2013 | Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions |
| CSA C22.2 No. 60079.1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| BS ISO 2346:2001 | Road vehicles. M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| BS ISO 19812:2006 | Road vehicles. M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| BS ISO 22977:2005 | Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing |
| UNE-EN ISO 12474:2011 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| MIL-DTL-32546 Base Document:2016 | Connectors, Electrical, Circular, for High-Speed Data Bus Transmission, Copper Conductor, General Specification for |
| 13/30277311 DC : 0 | BS ISO 17447-2 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 2: BASIC CHARACTERISTICS AND DIMENSIONS FOR CERAMIC-SHEATH-TYPE GLOW-PLUGS |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| 03/303649 DC : DRAFT MAR 2003 | ISO 6415 - INTERNAL COMBUSTION ENGINES - SPIN-ON FILTERS FOR LUBRICATING OIL - DIMENSIONS |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BIS IS 2269 : 2006 | HEXAGON SOCKET HEAD CAP SCREWS |
| NF EN ISO 12474 : 2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| DIN EN ISO 7380-1:2011-11 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| UNE-EN 60079-1:2015 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| BIS IS 4218-3 : 1999 AMD 1 2012 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 3: BASIC DIMENSIONS |
| BS EN ISO 10683:2014 | Fasteners. Non-electrolytically applied zinc flake coatings |
| UNE-EN ISO 10683:2015 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| BS EN ISO 4042:2000 | Fasteners. Electroplated coatings |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| EN 15048-1:2016 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| I.S. EN ISO 10642:2004 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004) |
| DIN EN ISO 10642:2013-04 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012) |
| DIN EN ISO 21670:2014-09 | FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014) |
| BS EN ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN ISO 4762:2004 | Hexagon socket head cap screws |
| BS EN ISO 4029:2003 | Hexagon socket set screws with cup point |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| BS EN ISO 14579:2011 | Hexalobular socket head cap screws |
| I.S. EN ISO 21269:2004 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| DIN EN ISO 4029:2004-05 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| DIN EN ISO 10683:2001-02 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| EN ISO 4029:2003 | Hexagon socket set screws with cup point (ISO 4029:2003) |
| ONORM EN ISO 7380-2 : 2011 | BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR (ISO 7380-2:2011) |
| ONORM EN ISO 7380-1 : 2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011) |
| 09/30203245 DC : 0 | BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B) |
| BS 6322-1:1982 | Tolerances for fasteners Specification for tolerances of bolts, screws and nuts with thread diameters ≥ 1.6 mm and ≤ 150 mm and product grades A, B and C |
| 11/30229160 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| BS ISO 2705:2006 | Road vehicles. M12 x 1,25 spark plugs with flat seating and their cylinder head housings |
| 09/30208217 DC : 0 | BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| UNE-EN 15048-1:2018 | Non-preloaded structural bolting assemblies - Part 1: General requirements |
| BS ISO 2344:1998 | Road vehicles. M14 x 1,25 spark plugs with conical seating and their cylinder head housings |
| UNI EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS ISO 2982-2:2013 | Rolling bearings. Accessories Dimensions for locknuts and locking devices |
| UNI EN 3706 : 2012 | AEROSPACE SERIES - HEADLESS THREADED PLUGS, CROSS RECESS, IN ALUMINIUM ALLOY 5086 |
| 12/30264722 DC : 0 | BS ISO 965-1 - ISO GENERAL-PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA |
| UNE-ISO 3442-3:2013 | Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 3: Power-operated chucks with serrated jaws |
| ISO 8470:2006 | Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| DIN EN ISO 7380-2:2011-11 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| NF EN ISO 7380-2 : 2011 | BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR |
| ISO 6415:2005 | Internal combustion engines — Spin-on filters for lubricating oil — Dimensions |
| I.S. EN ISO 7380-2:2011 | BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| BS EN ISO 7380-2:2011 | Button head screws Hexagon socket button head screws with collar |
| I.S. EN ISO 12474:2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
| PREN ISO 1207 : DRAFT 2009 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| ISO 2705:2006 | Road vehicles M12 x 1,25 spark-plugs with flat seating and their cylinder head housings |
| NF EN ISO 4766 : 2011 | SLOTTED SET SCREWS WITH FLAT POINT |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ASTM F 1941/F1941M : 2016 : REDLINE | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
| I.S. EN 50018:2001 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| UNE-EN ISO 1207:2011 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| BS EN ISO 4027:2003 | Hexagon socket set screws with cone point |
| UNE-EN ISO 21670:2015 | Fasteners - Hexagon weld nuts with flange (ISO 21670:2014) |
| ONORM EN ISO 10642 : 2013 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004+AMD 1:2012) |
| ISO 10642:2004 | Hexagon socket countersunk head screws |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN 15048-1:2007 | Non-preloaded structural bolting assemblies General requirements |
| UNE-EN ISO 11381:2016 | Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016) |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| I.S. EN ISO 4762:2004 | HEXAGON SOCKET HEAD CAP SCREWS |
| I.S. EN ISO 21670:2014 | FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014) |
| I.S. EN ISO 7085:2000 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| DIN EN ISO 7380:2004-05 | HEXAGON SOCKET BUTTON HEAD SCREWS |
| I.S. EN ISO 14579:2011 | HEXALOBULAR SOCKET HEAD CAP SCREWS |
| C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| I.S. EN ISO 898-5:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
| I.S. EN ISO 1207:2011 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| I.S. EN ISO 11381:2016 | OPHTHALMIC OPTICS - SPECTACLE FRAMES - SCREW THREADS (ISO 11381:2016) |
| BS 4168-3:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cone point |
| BS 4168-5:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with cup point |
| BS 4168-2:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with flat point |
| BS 4168-4:1994 | Hexagon socket screws and wrench keys: metric series Specification for hexagon socket set screws with dog point |
| BS AU 262-3:1997 | Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M 10 glow plugs |
| BS ISO 1919:1998 | Road vehicles. M14 x 1,25 spark plugs with flat seating and their cylinder head housings |
| BS EN 3706:2012 | Aerospace series. Headless threaded plugs, cross recess, in aluminium alloy 5086 |
| 13/30277307 DC : 0 | BS ISO 17447-1 - ROAD VEHICLES - GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 1: BASIC CHARACTERISTICS AND DIMENSIONS FOR METAL-SHEATH-TYPE GLOW-PLUGS |
| 09/30208236 DC : 0 | BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT |
| BS EN ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread |
| ISO 6550-3:2013 | Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 3: M10 glow-plugs |
| BIS IS/IEC 60079-1 : 2007 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| BS EN 50018:2000 | Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure \'d\' |
| UNI EN ISO 4766 : 2012 | SLOTTED SET SCREWS WITH FLAT POINT |
| NF EN 22857 : 1990 | GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES - MANUFACTURING TOLERANCES ON THE THREADED PORTION |
| MIL-DTL-83538 Revision D:2006 | CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS FOR MIL-STD-1760 APPLICATIONS (METRIC), GENERAL SPECIFICATION FOR |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 04/30098930 DC : DRAFT FEB 2004 | ISO 6550-4 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW PLUGS (N983) |
| 04/30114086 DC : DRAFT JUL 2004 | EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE) |
| PREN ISO 4766 : DRAFT 2009 | SLOTTED SET SCREWS WITH FLAT POINT |
| 07/30155222 DC : 0 | BS ISO 28741 - ROAD VEHICLES - SPARK-PLUGS AND THEIR CYLINDER HEAD HOUSINGS - BASIC CHARACTERISTICS AND DIMENSIONS |
| BS ISO 3442-3:2007 | Machine tools. Dimensions and geometric tests for self-centring chucks with two-piece jaws Power-operated chucks with serrated jaws |
| BS ISO 16656:2004 | Hydraulic fluid power. Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar). Mounting dimensions |
| 02/711527 DC : DRAFT SEP 2002 | ISO 10684 - FASTENERS - HOT DIP GALVANIZED COATINGS |
| 02/207221 DC : DRAFT JULY 2002 | IEC 60079-1 ED.5 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D" |
| BS ISO 17447-2:2015 | Road Vehicles. Glow-plugs with conical seating and their cylinder head housing Basic characteristics and dimensions for ceramic-sheath-type glow-plugs |
| 04/30123544 DC : DRAFT OCT 2004 | IEC 60079-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES 'D' |
| UNI EN ISO 10683 : 2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| ISO 2347:1994 | Road vehicles M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing |
| I.S. EN 60079-1:2014 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| PREN 3706 : 200P1 | AEROSPACE SERIES - HEADLESS THREADED PLUGS CROSS RECESS, IN ALUMINIUM ALLOY 5086 |
| API 613:2003 | SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| EN ISO 10683:2014 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| ISO 2345:1994 | Road vehicles M18 x 1,5 spark-plugs with conical seating and their cylinder head housing |
| ISO 17447-2:2015 | Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs |
| DIN EN ISO 4042:2001-01 | FASTENERS - ELECTROPLATED COATINGS |
| UNE-EN ISO 4766:2012 | Slotted set screws with flat point (ISO 4766:2011) |
| UNI EN ISO 7380-2 : 2012 | BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR |
| UNI EN ISO 12474 : 2010 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| ISO 16656:2016 | Hydraulic fluid power Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) Mounting dimensions |
| ISO 7380:2004 | Hexagon socket button head screws |
| DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| EEMUA 186 : 2016 | A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES |
| DIN EN ISO 4762:2004-06 | Hexagon socket head cap screws (ISO 4762:2004) |
| ISO 4028:2003 | Hexagon socket set screws with dog point |
| BS EN ISO 4028:2003 | Hexagon socket set screws with dog point |
| BS EN ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread |
| PD ISO/TR 11364:2012 | Gas cylinders. Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system |
| EN ISO 4759-1:2000 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000) |
| EN ISO 7085 : 1999 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| UNI EN ISO 14579 : 2011 | HEXALOBULAR SOCKET HEAD CAP SCREWS |
| UNI EN ISO 21670 : 2014 | FASTENERS - HEXAGON WELD NUTS WITH FLANGE |
| UNI EN ISO 1207 : 2012 | SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A |
| UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| UNI EN ISO 898-5 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
| CSA C22.2 No. 60079.1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| UNI EN ISO 10642 : 2013 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS |
| DIN ISO 3442-3:2010-08 | Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws (ISO 3442-3:2007) |
| UNI EN ISO 7380-1 : 2012 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| BS ISO 16246:2005 | Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing |
| BIS IS 15248-3 : 2014 | MACHINE TOOLS - DIMENSIONS AND GEOMETRIC TESTS FOR SELF-CENTRING CHUCKS WITH TWO-PIECE JAWS - PART 3: POWER-OPERATED CHUCKS WITH SERRATED JAWS |
| 09/30203242 DC : 0 | BS ISO 7380-1 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 1: BUTTON HEAD (HEAD SHAPE A) |
| DIN ISO 4042:1992-06 | THREADED COMPONENTS - ELECTROPLATED COATINGS |
| 12/30259911 DC : 0 | BS ISO 2982-2 - ROLLING BEARINGS - ACCESSORIES - PART 2: DIMENSIONS FOR LOCKNUTS AND LOCKING DEVICES |
| BS ISO 6550-3:2013 | Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M10 glow-plugs |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| UNI ISO 3442-3 : 2009 | Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws |
| 08/30152628 DC : DRAFT SEP 2008 | BS ISO 6550-4 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 4: M8 X 1 GLOW-PLUGS |
| 11/30232174 DC : DRAFT AUG 2011 | BS ISO 6550-3 - ROAD VEHICLES - SHEATH-TYPE GLOW-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING - PART 3: M10 GLOW-PLUGS |
| BS EN ISO 7380-1:2011 | Button head screws Hexagon socket button head screws |
| API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| ISO 2346:2001 | Road vehicles M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| ISO 17447-1:2015 | Road Vehicles Glow-plugs with conical seating and their cylinder head housing Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs |
| I.S. EN ISO 4042:1999 | FASTENERS - ELECTROPLATED COATINGS |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| DIN EN ISO 12474:2011-01 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| I.S. EN 3706:2012 | AEROSPACE SERIES - HEADLESS THREADED PLUGS, CROSS RECESS, IN ALUMINIUM ALLOY 5086 |
| BS ISO 6550-4:2014 | Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing M8 x 1 glow-plugs |
| ISO 19812:2006 | Road vehicles M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| ISO 16246:2005 | Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing |
| ISO 28741:2013 | Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions |
| ISO 4762:2004 | Hexagon socket head cap screws |
| I.S. EN 15048-1:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| ISO 6550-4:2014 | Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 4: M8 x 1 glow-plugs |
| DIN EN 15048-1:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 21670:2014 | Fasteners. Hexagon weld nuts with flange |
| BS EN ISO 10642 : 2004 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| UNE-EN ISO 14579:2011 | Hexalobular socket head cap screws (ISO 14579:2011) |
| BS EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes. Requirements and test procedures |
| BS EN ISO 10684:2004 | Fasteners. Hot dip galvanized coatings |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 14579:2011 | Hexalobular socket head cap screws |
| ISO 2857:1973 | Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion |
| BS EN ISO 1207:2011 | Slotted cheese head screws. Product grade A |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS EN ISO 7380:2004 | Hexagon socket button head screws |
| ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| ISO 7380-1:2011 | Button head screws — Part 1: Hexagon socket button head screws |
| ISO/TR 11364:2012 | Gas cylinders Compilation of national and international valve stem/gas cylinder neck threads and their identification and marking system |
| ISO 7380-2:2011 | Button head screws — Part 2: Hexagon socket button head screws with collar |
| ISO 4766:2011 | Slotted set screws with flat point |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread |
| ISO 1207:2011 | Slotted cheese head screws Product grade A |
| 05/30134569 DC : DRAFT JUN 2005 | IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| BS EN ISO 11381:2016 | Ophthalmic optics. Spectacle frames. Screw threads |
| UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| ISO 4026:2003 | Hexagon socket set screws with flat point |
| UNE-EN ISO 898-5:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 4027:2003 | Hexagon socket set screws with cone point |
| ISO 11381:2016 | Ophthalmic optics Spectacle frames Screw threads |
| DIN EN ISO 4026:2004-05 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| DIN EN ISO 14579:2011-06 | Hexalobular socket head cap screws (ISO 14579:2011) |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN ISO 1207:2011 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| EN ISO 21670:2014 | Fasteners - Hexagon weld nuts with flange (ISO 21670:2014) |
| EN ISO 7380:2004 | Hexagon socket button head screws (ISO 7380:2004) |
| EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
| EN ISO 4762:2004 | Hexagon socket head cap screws (ISO 4762:2004, Corrected version 2024-08) |
| EN ISO 14579:2011 | Hexalobular socket head cap screws (ISO 14579:2011) |
| EN 3706:2012 | Aerospace series - Headless threaded plugs, cross recess, in aluminium alloy 5086 |
| EN ISO 4766:2011 | Slotted set screws with flat point (ISO 4766:2011) |
| EN ISO 7380-1:2011 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| EN ISO 7380-2:2011 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| EN ISO 4027:2003 | Hexagon socket set screws with cone point (ISO 4027:2003) |
| EN ISO 4026:2003 | Hexagon socket set screws with flat point (ISO 4026:2003) |
| EN ISO 12474:2010 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| EN 74-1:2005 | Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| EN ISO 4028:2003 | Hexagon socket set screws with dog point (ISO 4028:2003) |
| EN ISO 11381:2016 | Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016) |
| EN ISO 21269:2004 | Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004) |
| EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| EN 22857:1989 | Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches - Manufacturing tolerances on the threaded portion (ISO 2857:1973 + A1:1984 +A2:1986) |
| ISO 2982-2:2013 | Rolling bearings — Accessories — Part 2: Dimensions for locknuts and locking devices |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| FM 3615 : 2018 | EXPLOSIONPROOF ELECTRICAL EQUIPMENT GENERAL REQUIREMENTS |
| I.S. EN ISO 7380:2004 | HEXAGON SOCKET BUTTON HEAD SCREWS |
| I.S. EN ISO 7380-1:2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| ISO 3442-3:2007 | Machine tools Dimensions and geometric tests for self-centring chucks with two-piece jaws Part 3: Power-operated chucks with serrated jaws |
| BS ISO 8470:2006 | Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| UNE-EN ISO 7380-1:2012 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| BS ISO 6415:2005 | Internal combustion engines. Spin-on filters for lubricating oil. Dimensions |
| 02/707699 DC : DRAFT JUN 2002 | ISO/DIS 21670 - HEXAGON WELD NUTS WITH FLANGE |
| NF EN ISO 7380-1 : 2011 | BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| 06/30029245 DC : 0 | EN 3660-062 - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 062: CABLE OUTLET, STYLE K, 90 DEGREE, FOR HEAT SHRINKABLE BOOT SHIELDED, SEALED, SELF LOCKING - PRODUCT STANDARD |
| DIN 202:1999-11 | SCREW THREADS - GENERAL PLAN |
| BS ISO 2704:1998 | Road vehicles. M10 x 1 spark plugs with flat seating and their cylinder head housings |
| 11/30247086 DC : 0 | BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D" |
| SAE AS 29600 : 2017 | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS ASSOCIATED HARDWARE, GENERAL SPECIFICATION FOR |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| CSA B356 : 2000 : R2005 | WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
| CSA B356 : 2000 : R2010 | WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
| ISO 5713:1990 | Equipment for working the soil — Fixing bolts for soil working elements |
| 07/30139822 DC : 0 | |
| BS ISO 5483:2003 | Ships and marine technology. Drain facilities from oil and water tanks |
| 03/313530 DC : DRAFT AUG 2003 | ISO 16246 - ROAD VEHICLES - M12 X 1.25 SPARK-PLUGS WITH FLAT SEATING AND 14 MM HEXAGON AND THEIR CYLINDER HEAD HOUSING |
| DIN EN 50018 : 2001 AMD 1 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| CSA B356 : 2000 | WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
| BIS IS/IEC 60079-31 : 2008 | EXPLOSIVE ATMOSPHERES - PART 31: EQUIPMENT DUST IGNITION PROTECTION BY ENCLOSURE "T" |
| I.S. EN ISO 4766:2011 | SLOTTED SET SCREWS WITH FLAT POINT |
| ISO 22977:2005 | Road vehicles M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BIS IS 2148 : 2004 AMD 2 2008 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - FLAMEPROOF ENCLOSURES "D" |
| I.S. EN ISO 10683:2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| ISO 5483:2003 | Ships and marine technology — Drain facilities from oil and water tanks |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| DIN EN ISO 10684:2011-09 | Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008) |
| DIN EN ISO 1207:2011-10 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| BS EN ISO 4759-1:2001 | Tolerances for fasteners Bolts, screws, studs and nuts. Product grades A, B and C |
| BS ISO 13691 : 2001 AMD 14307 | PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
| 13/30286778 DC : 0 | BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| BS EN 28736:1992 | Taper pins with internal thread, unhardened |
| ISO 21670:2014 | Fasteners — Hexagon weld nuts with flange |
| BS EN ISO 4026:2003 | Hexagon socket set screws with flat point |
| BS EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| DIN EN ISO 21670:2004-01 | FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014) |
| DIN EN ISO 21269:2004-06 | HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD |
| EN 50018 : 2000 AMD 1 2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| DIN EN ISO 4028:2004-05 | Hexagon socket set screws with dog point (ISO 4028:2003) |
| CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS 3172(1995) : 1995 AMD 9448 | SPECIFICATION FOR SCREW THREADS FOR SPECTACLE FRAMES |
| ONORM EN ISO 4766 : 2011 | SLOTTED SET SCREWS WITH FLAT POINT (ISO 4766:2011) |
| ISO 5408:2009 | Screw threads Vocabulary |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.