ISO 9591:2004
Current
Current
The latest, up-to-date edition.
Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
Available format(s)
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
Language(s)
English, French
Published date
09-13-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 9591:2004 specifies a method for the determination of resistance to stress corrosion cracking (SCC) of aluminium alloys.
It covers the method of sampling, the types of specimens, the loading procedure, the type of environment and the interpretation of results.
This International Standard is aimed at determining resistance to SCC as a function of the chemical composition, the method of manufacture and heat treatment of aluminium alloys.
It applies to cast and wrought aluminium alloys in the form of castings, semi-finished products, parts and weldments.
Since most natural and many artificial environments contain chlorides, ISO 9591:2004 can be used to compare the performance of products employed under marine atmospheres and in environments containing chlorides, providing that the failure mechanism is not changed.
| Committee |
ISO/TC 156
|
| DevelopmentNote |
Supersedes ISO/DIS 9591 (09/2004)
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| LN 65666:1974-07 | Identical |
| SS-ISO 9591 : 2005 | Identical |
| LN 65666:1974-07 | Corresponds |
| 06/30136505 DC : 0 | EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| 06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 586-2:1994-11 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 2: MECHANICAL PROPERTIES AND ADDITIONAL PROPERTY REQUIREMENTS |
| BS EN 586-2:1994 | Aluminium and aluminium alloys. Forgings Mechanical properties and additional property requirements |
| BS EN 754-1:2016 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery |
| I.S. EN 754-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| ISO 6361-1:2011 | Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery |
| ONORM EN 754-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 755-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 755-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| 06/30136187 DC : 0 | EN 755-1 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| PREN 754-1 : DRAFT 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| 15/30324460 DC : 0 | BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 754-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| UNE-EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| UNI EN 755-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| PREN 485-2 : DRAFT 99 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| 09/30196316 DC : 0 | BS ISO 6361-1 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS, STRIPS AND PLATES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| ISO 6362-1:2012 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery |
| DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 755-1:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| UNE-EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| 99/710776 DC : DRAFT JULY 1999 | PREN 485-2 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| ISO 6363-1:2012 | Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery |
| ISO 7539-4:1989 | Corrosion of metals and alloys Stress corrosion testing Part 4: Preparation and use of uniaxially loaded tension specimens |
| ISO 7539-8:2000 | Corrosion of metals and alloys Stress corrosion testing Part 8: Preparation and use of specimens to evaluate weldments |
| ISO 7539-2:1989 | Corrosion of metals and alloys Stress corrosion testing Part 2: Preparation and use of bent-beam specimens |
| ISO 7539-9:2003 | Corrosion of metals and alloys Stress corrosion testing Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement |
| ISO 7539-6:2011 | Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement |
| ISO 7539-7:2005 | Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing |
| ISO 7539-1:2012 | Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures |
| NFA 05 301 : 2012 | ALUMINIUM ALLOYS - STRESS CORROSION CRACKING OF THICK PRODUCTS |
| ISO 7539-5:1989 | Corrosion of metals and alloys Stress corrosion testing Part 5: Preparation and use of C-ring specimens |
| ISO 7539-3:1989 | Corrosion of metals and alloys Stress corrosion testing Part 3: Preparation and use of U-bend specimens |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.