ISO 9352:2012
Current
Current
The latest, up-to-date edition.
Plastics — Determination of resistance to wear by abrasive wheels
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, Russian
Published date
04-13-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1.1 This International Standard specifies a general method for determining the resistance to abrasive wear of plastics under the action of abrasive wheels. It is equally applicable to moulded test specimens, components
and finished products.
1.2 The particular test conditions and the method of expressing the results may differ according to the type of material. The test conditions and specific method are specified in the relevant standards for each material or product.
This method is not applicable to cellular materials or paints.
| DevelopmentNote |
Supersedes ISO/DIS 9352. (04/2012)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 9352 : 2012 | Identical |
| SS-ISO 9352:2012 | Identical |
| BS ISO 9352:2012 | Identical |
| BS 2782-3 Method 370:1990 | Identical |
| UNI ISO 9352 : 1999 | Identical |
| BS ISO 11798:1999 | Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods |
| 12/30269195 DC : 0 | BS ISO/IEC 30190 - INFORMATION TECHNOLOGY - DIGITALLY RECORDED MEDIA FOR INFORMATION INTERCHANGE AND STORAGE - 120 MM SINGLE LAYER (25,0 GBYTES PER DISK) AND DUAL LAYER (50,0 GBYTES PER DISK) BD RECORDABLE DISK (BD-RSL/DL) |
| 12/30276397 DC : 0 | BS ISO/IEC 18745-1 - TEST METHODS FOR MACHINE READABLE TRAVEL DOCUMENTS (MRTD) - PART 1: PHYSICAL TEST METHODS FOR PASSPORT BOOKS (DURABILITY) |
| BS ISO/IEC 30193:2016 | Information technology — Digitally recorded media for information interchange and storage — 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk |
| ISO 4586-2:2015 | High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| I.S. CEN TS 15185:2006 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| UNE-EN 14688:2016 | Sanitary appliances - Wash basins - Functional requirements and test methods |
| UNI ISO 11798 : 2011 | INFORMATION AND DOCUMENTATION - PERMANENCE AND DURABILITY OF WRITING, PRINTING AND COPYING ON PAPER - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 5470-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
| BS EN ISO 7784-2:2016 | Paints and varnishes. Determination of resistance to abrasion Method with abrasive rubber wheels and rotating test specimen |
| BS EN 14323:2017 | Wood-based panels. Melamine faced boards for interior uses. Test methods |
| CEN/TS 15185:2005 | Furniture - Assessment of the surface resistance to abrasion |
| EN 60505:2011/AC:2017-03 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017) |
| DIN EN ISO 5470-1:2017-04 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| EN 15185:2011 | Furniture - Assessment of the surface resistance to abrasion |
| 05/30129278 DC : DRAFT FEB 2005 | ISO/DIS 8029-2 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| ISO 14656:1999 | Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
| DD CEN/TS 15185:2005 | Furniture. Assessment of the surface resistance to abrasion |
| 14/30266788 DC : 0 | BS EN ISO 7784-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 1: METHOD WITH ABRASIVE-PAPER COVERED WHEELS AND ROTATING TEST PANEL |
| PREN 15185 : DRAFT 2009 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| UNI EN 15185 : 2011 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| I.S. EN 60505:2011 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| ANSI/AAMI/ISO 15676:2016 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO) |
| DIN EN 13310:2015-09 | KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DIN EN 14323:2004-06 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS |
| I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| I.S. EN ISO 5470-1:2016 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| I.S. EN 14323:2017 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS |
| I.S. EN ISO 7784-2:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 2: METHOD WITH ABRASIVE RUBBER WHEELS AND ROTATING TEST SPECIMEN (ISO 7784-2:2016) |
| I.S. EN ISO 7784-1:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 1: METHOD WITH ABRASIVE-PAPER COVERED WHEELS AND ROTATING TEST SPECIMEN (ISO 7784-1:2016) |
| UNE 68401:2016 | Animal identification. Plastic ear tags. |
| I.S. EN 14688:2015 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| BS EN ISO 8029:2014 | Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification |
| 14/30266791 DC : 0 | BS EN ISO 7784-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO ABRASION - PART 2: METHOD WITH ABRASIVE RUBBER WHEELS AND ROTATING TEST PANEL |
| 11/30244915 DC : 0 | BS EN ISO 8029 - PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| BS EN 15185:2011 | Furniture. Assessment of the surface resistance to abrasion |
| UNE-EN 15185:2011 | Furniture - Assessment of the surface resistance to abrasion |
| ASTM D 1044 : 2013 : REDLINE | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| 02/121747 DC : DRAFT APR 2002 | PREN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| DIN EN ISO 8029:2014-12 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| PREN 14688 : DRAFT 2014 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| NF EN 15185 : 2011 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| DIN EN 14688:2015-10 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| NF CEN/TS 15185 : 2006 XP | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| UNI EN ISO 8029 : 2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| UNE-EN ISO 7784-1:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016) |
| UNE-EN ISO 7784-2:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016) |
| UNI EN ISO 13628-2 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| I.S. EN 13310:2015 | KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| 15/30317619 DC : 0 | BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER |
| DIN EN 15185:2011-07 | Furniture - Assessment of the surface resistance to abrasion |
| 09/30207453 DC : 0 | BS EN 15185 - FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| 14/30311457 DC : 0 | BS EN 13310 - KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| BS 7825-3.3:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics |
| BS EN 60505:2011 | Evaluation and qualification of electrical insulation systems |
| 14/30311463 DC : 0 | BS EN 14688 - SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ISO 11798:1999 | Information and documentation — Permanence and durability of writing, printing and copying on paper — Requirements and test methods |
| EN 14688:2015 | Sanitary appliances - Wash basins - Functional requirements and test methods |
| EN 13310:2015 | Kitchen sinks - Functional requirements and test methods |
| API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| I.S. EN 15185:2011 | FLUESSIGGAS-GERAETE UND AUSRUESTUNGSTEILE - KENNZEICHNUNG VON FLASCHEN UND FAESSERN |
| BS ISO/IEC 18745-1:2014 | Information technology. Test methods for machine readable travel documents (MRTD) and associated devices Physical test methods for passport books (durability) |
| BS EN 13310 : 2015 | KITCHEN SINKS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| CEI EN 60505 : 2012 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| I.S. EN ISO 8029:2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| ISO 15676:2016 | Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) |
| ISO/IEC 18745-1:2014 | Information technology Test methods for machine readable travel documents (MRTD) and associated devices Part 1: Physical test methods for passport books (durability) |
| ISO 7784-1:2016 | Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen |
| BS EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader |
| IEC 60505:2011 | Evaluation and qualification of electrical insulation systems |
| ISO 5470-1:2016 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
| ISO 7784-2:2016 | Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive rubber wheels and rotating test specimen |
| BS EN 14688 : 2015 | SANITARY APPLIANCES - WASH BASINS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| UNE-EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| ISO 13628-2:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| DIN EN 15334:2007-05 | Sanitary appliances - Methacrylic dispersions of high filler content |
| EN 15334:2007 | Sanitary appliances - Methacrylic dispersions of high filler content |
| EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
| EN ISO 7784-2:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016) |
| EN ISO 7784-1:2016 | Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen (ISO 7784-1:2016) |
| EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| BS ISO 14656:1999 | Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
| ISO/IEC 30191:2015 | Information technology Digitally recorded media for information interchange and storage 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk |
| ISO/IEC 30193:2016 | Information technology Digitally recorded media for information interchange and storage 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk |
| UNE-EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
| ISO/IEC 30192:2016 | Information technology Digitally recorded media for information interchange and storage 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk |
| 15/30314236 DC : 0 | BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO) |
| UNE-EN 13310:2016 | Kitchen sinks - Functional requirements and test methods |
| UNE-EN ISO 5470-1:2017 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| BS EN 15334:2007 | Sanitary appliances. Methacrylic dispersions of high filler content |
| BS EN ISO 7784-1:2016 | Paints and varnishes. Determination of resistance to abrasion Method with abrasive-paper covered wheels and rotating test specimen |
| ISO 8029:2014 | Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
| EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| ONORM EN 15185 : 2011 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| ASTM D 1044 : 2013 : REDLINE | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.