ISO 9330-4:2000
Current
The latest, up-to-date edition.
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
07-13-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This part of ISO 9330 specifies the technical delivery conditions for submerged arc-welded tubes of circular crosssection,
made of unalloyed or alloyed steel with specified elevated temperature properties. These tubes are
intended for pressure purposes in cases when the material is also subjected to elevated temperatures, e.g. for the
construction of steam generating equipment and for interconnecting pipework.
The requirements of appropriate international application standards and relevant national legal regulations shall be
taken into account by the user. For boilers and pressure vessels International Standards ISO 831, ISO 2604 and
ISO 5730 are available.
For the general technical delivery requirements, see ISO 404.
NOTE The English words "tube" and "pipe" are synonymous.
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO/TS 4949:2016 | Steel names based on letter symbols |
| ISO 12094:1994 | Welded steel tubes for pressure purposes Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ISO 3545-1:1989 | Steel tubes and fittings — Symbols for use in specifications — Part 1: Tubes and tubular accessories with circular cross-section |
| ISO 3205:1976 | Preferred test temperatures |
| ISO 783:1999 | Metallic materials Tensile testing at elevated temperature |
| ISO 11496:1993 | Seamless and welded steel tubes for pressure purposes Ultrasonic testing of tube ends for the detection of laminar imperfections |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 148:1983 | Steel — Charpy impact test (V-notch) |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 6761:1981 | Steel tubes Preparation of ends of tubes and fittings for welding |
| ISO 5252:1991 | Steel tubes — Tolerance systems |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 9765:1990 | Submerged arc-welded steel tubes for pressure purposes Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 12096:1996 | Submerged arc-welded steel tubes for pressure purposes Radiographic testing of the weld seam for the detection of imperfections |
| ISO 5177:1981 | Fusion welded butt joints in steel Transverse side bend test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.