ISO 9330-3:1997
Current
Current
The latest, up-to-date edition.
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
02-27-1997
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies the technical delivery conditions for electric resistance and induction welded tubes of circular cross-section having a wall thickness up to and including 16 mm. These pipes are intended for low temperature piping systems. For boilers and pressure vessels ISO 5730 is available. Partial revision of ISO 2604-3:1975.
| DevelopmentNote |
Supersedes ISO 2604-3 (09/2002)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN 17174:1985-02 | Corresponds |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO 8496:2013 | Metallic materials Tube Ring tensile test |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| ISO 1129:1980 | Steel tubes for boilers, superheaters and heat exchangers Dimensions, tolerances and conventional masses per unit length |
| ISO 10332:2010 | Non-destructive testing of steel tubes Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ISO 9302:1994 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Electromagnetic testing for verification of hydraulic leak-tightness |
| ISO 3545-1:1989 | Steel tubes and fittings — Symbols for use in specifications — Part 1: Tubes and tubular accessories with circular cross-section |
| ISO 3205:1976 | Preferred test temperatures |
| ISO 9303:1989 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections |
| ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
| ISO 377-2:1989 | Selection and preparation of samples and test pieces of wrought steels Part 2: Samples for the determination of the chemical composition |
| ISO/TR 4949:1989 | Steel names based on letter symbols |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 5730:1992 | Stationary shell boilers of welded construction (other than water-tube boilers) |
| ISO 148:1983 | Steel — Charpy impact test (V-notch) |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 6761:1981 | Steel tubes Preparation of ends of tubes and fittings for welding |
| ISO 5252:1991 | Steel tubes — Tolerance systems |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 8495:2013 | Metallic materials Tube Ring-expanding test |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| ISO 377-1:1989 | Selection and preparation of samples and test pieces of wrought steels Part 1: Samples and test pieces for mechanical test |
| ISO 9764:1989 | Electric resistance and induction welded steel tubes for pressure purposes Ultrasonic testing of the weld seam for the detection of longitudinal imperfections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.