ISO 9329-1:1989
Current
Current
The latest, up-to-date edition.
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
06-29-1989
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Applies to seamless steel tubes with circular section of non-alloy quality steel. These tubes are provided for general pressure purposes including transporting of pressurized fluids. There are standards and rules permitting the use of these tubes up to a temperature of 350 0C (see annex A). The terms "tube" and "pipe" are synonymous terms. For general technical delivery conditions see ISO 404.
| DevelopmentNote |
Supersedes ISO 2604-2 (04/2004)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN 1629:1984-10 | Similar to |
| I.S. EN ISO 11118:2015&LC:2015-12 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
| DIN EN ISO 11118:2016-03 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
| BS EN ISO 9809-2:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
| 06/30148179 DC : DRAFT SEP 2006 | ISO 9809-3 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| 12/30251283 DC : 0 | BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
| PREN 1554 : DRAFT 2011 | CONVEYOR BELTS - DRUM FRICTION TESTING |
| 06/30148176 DC : DRAFT SEP 2006 | ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| I.S. EN ISO 9809-2:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| BS EN ISO 15749-2:2004 | Ships and marine technology. Drainage systems on ships and marine structures Sanitary drainage, drain piping for gravity system |
| BS EN ISO 9455-12:1994 | Soft soldering fluxes. Test methods Steel tube corrosion test |
| DIN EN ISO 15749-3:2004-09 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (ISO 15749-3:2004) |
| BS EN ISO 9809-1:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
| I.S. EN ISO 9809-1:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| UNI EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| BS ISO 22968:2010 | Forced draught oil burners |
| I.S. EN ISO 9809-3:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| NF EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| UNI EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| ISO 20238:2018 | Conveyor belts — Drum friction testing |
| EN 267:2009+A1:2011 | Automatic forced draught burners for liquid fuels |
| DIN EN 1554:2012-10 | CONVEYOR BELTS - DRUM FRICTION TESTING |
| DIN EN 13617-1:2012-08 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| DIN EN 267:2012-03 (Draft) | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| DIN EN 267:2011-11 | Automatic forced draught burners for liquid fuels |
| BS EN 1554:2012 | Conveyor belts. Drum friction testing |
| I.S. EN ISO 9455-12:1995 | SOFT SOLDERING FLUXES - TEST METHODS - PART 12: STEEL TUBE CORROSION TEST |
| I.S. EN 13617-1:2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| VDI 6002 Blatt 1:2014-03 | Solar heating for potable water - Basic principles - System technology and application in residential buildings |
| NF EN ISO 9809-3 : 2011 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| PREN 13617-1 : DRAFT 2010 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| 10/30219405 DC : 0 | BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| BS EN ISO 9809-3:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
| 12/30258099 DC | BS EN 267. Forced draught burners for liquid fuels |
| DIN EN ISO 9809-3:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| ISO 9809-4:2014 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| BS EN 267 : 2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| ISO 15749-3:2004 | Ships and marine technology — Drainage systems on ships and marine structures — Part 3: Sanitary drainage, drain piping for vacuum systems |
| UNI EN 267 : 2011 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| EN ISO 15749-3:2004 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum system (ISO 15749-3:2004) |
| EN ISO 9455-12:1994 | Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992) |
| UNI EN 13617-1 : 2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| UNI EN 1554 : 2012 | CONVEYOR BELTS - DRUM FRICTION TESTING |
| NF EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| ISO 22968:2010 | Forced draught oil burners |
| 06/30148173 DC : DRAFT SEP 2006 | ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| BS ISO 22967:2010 | Forced draught gas burners |
| BS ISO 9809-4:2014 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| BS EN ISO 11118:2015 | Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods |
| DIN EN ISO 9809-1:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| UNE-EN ISO 11118:2016 | Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015) |
| ONORM EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| I.S. EN 267:2009 | AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
| UNE-EN 1554:2012 | Conveyor belts - Drum friction testing |
| BS EN 13617-1:2012 | Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| BS EN ISO 15749-3:2004 | Ships and marine technology. Drainage systems on ships and marine structures Sanitary drainage, drain piping for vacuum system |
| ONORM EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| ISO 11118:2015 | Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| BS EN ISO 15749-5:2004 | Ships and marine technology. Drainage systems on ships and marine structures Drainage of decks, cargo spaces and swimming pools |
| ISO 15749-5:2004 | Ships and marine technology — Drainage systems on ships and marine structures — Part 5: Drainage of decks, cargo spaces and swimming pools |
| UNE-EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| ISO 9455-12:1992 | Soft soldering fluxes Test methods Part 12: Steel tube corrosion test |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| EN ISO 11118 : 2015 COR 2015 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
| DIN EN ISO 15749-5:2004-09 | Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools (ISO 15749-5:2004) |
| EN ISO 15749-4:2004 | Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO 15749-4:2004) |
| EN 1554:2012 | Conveyor belts - Drum friction testing |
| EN ISO 9809-1:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
| EN ISO 9809-3:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
| EN ISO 9809-2:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
| EN ISO 15749-5:2004 | Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools (ISO 15749-5:2004) |
| EN ISO 15749-2:2004 | Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system (ISO 15749-2:2004) |
| ISO 22967:2010 | Forced draught gas burners |
| I.S. EN 1554:2012 | CONVEYOR BELTS - DRUM FRICTION TESTING |
| 11/30250552 DC : 0 | BS EN 1554 - CONVEYOR BELTS - DRUM FRICTION TESTING |
| DIN EN ISO 9809-2:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| UNI EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| ONORM EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| ISO 15749-4:2004 | Ships and marine technology — Drainage systems on ships and marine structures — Part 4: Sanitary drainage, sewage disposal pipes |
| ISO 15749-2:2004 | Ships and marine technology — Drainage systems on ships and marine structures — Part 2: Sanitary drainage, drain piping for gravity systems |
| BS EN 286-1 : 1998 | SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
| BS EN ISO 15749-4:2004 | Ships and marine technology. Drainage systems on ships and marine structures Sanitary drainage, sewage disposal pipes |
| DIN EN ISO 15749-4:2004-09 | Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes (ISO 15749-4:2004) |
| DIN EN ISO 9455-12:1994-11 | SOFT SOLDERING FLUXES - TEST METHODS - PART 12: STEEL TUBE CORROSION TEST |
| DIN EN ISO 15749-2:2004-09 | Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems (ISO 15749-2:2004) |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO 8496:2013 | Metallic materials Tube Ring tensile test |
| ISO 6892:1998 | Metallic materials Tensile testing at ambient temperature |
| ISO 9302:1994 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Electromagnetic testing for verification of hydraulic leak-tightness |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 7438:2016 | Metallic materials Bend test |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ISO 5252:1991 | Steel tubes — Tolerance systems |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.