ISO 9277:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Determination of the specific surface area of solids by gas adsorption — BET method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
11-08-2022
Superseded by
Language(s)
English, Russian
Published date
08-20-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 9277:2010 specifies the determination of the overall specific external and internal surface area of disperse (e.g. nano-powders) or porous solids by measuring the amount of physically adsorbed gas according to the Brunauer, Emmett and Teller (BET) method. It takes account of the International Union for Pure and Applied Chemistry (IUPAC) recommendations of 1984 and 1994.
The BET method is applicable only to adsorption isotherms of type II (disperse, nonporous or macroporous solids) and type IV (mesoporous solids, pore diameter between 2 nm and 50 nm). Inaccessible pores are not detected. The BET method cannot reliably be applied to solids which absorb the measuring gas.
A strategy for specific surface area determination of microporous materials (type I isotherms) is described in an annex.
| DevelopmentNote |
Supersedes ISO/DIS 9277. (08/2010)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN ISO 9277:2014-01 | Identical |
| BS ISO 9277:2010 | Identical |
| NEN ISO 9277 : 2010 | Identical |
| JIS Z 8830:2013 | Identical |
| NF ISO 9277 : 1996 | Identical |
| PN ISO 9277 : 2000 | Identical |
| DIN 66131:1993-07 | Identical |
| UNE-ISO 9277:2009 | Identical |
| BS 8439:2005 | Continuous handling equipment and systems. Guide to properties of powders and bulk materials |
| 14/30300499 DC : 0 | BS ISO 18852 - RUBBER COMPOUNDING INGREDIENTS - DETERMINATION OF MULTIPOINT NITROGEN SURFACE AREA (NSA) AND STATISTICAL THICKNESS SURFACE AREA (STSA) |
| CEN/TR 16912:2016 | Guidelines for a procedure to support the European standardization of cements |
| PD ISO/TR 18196:2016 | Nanotechnologies. Measurement technique matrix for the characterization of nano-objects |
| BS ISO 15901-3:2007 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Analysis of micropores by gas adsorption |
| DD ISO/TS 12805:2011 | Nanotechnologies. Materials specifications. Guidance on specifying nano-objects |
| ISO 12800:2017 | Nuclear fuel technology — Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method |
| BS ISO 18852:2015 | Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) |
| BS PD ISO/TS 80004-6 : 2013 | NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION |
| CEN ISO/TS 80004-6:2015 | Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) |
| 09/30205526 DC : 0 | BS EN 197-1 - CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS |
| ISO/TR 10993-22:2017 | Biological evaluation of medical devices — Part 22: Guidance on nanomaterials |
| I.S. EN 12206-1:2004 | PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER |
| 03/319412 DC : DRAFT NOV 2003 | EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| CAN/CSA-Z5100-17 | Cellulose nanomaterials - Test methods for characterization |
| S.R. CEN ISO/TS 80004-6:2015 | NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION (ISO/TS 80004-6:2013) |
| S.R. CEN ISO TS 27687:2009 | NANOTECHNOLOGIES - TERMINOLOGY AND DEFINITIONS FOR NANO-OBJECTS - NANOPARTICLE, NANOFIBRE AND NANOPLATE |
| ONORM EN 1018 : 2015 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE |
| S.R. CEN ISO/TS 17200:2015 | NANOTECHNOLOGY - NANOPARTICLES IN POWDER FORM - CHARACTERISTICS AND MEASUREMENTS (ISO/TS 17200:2013) |
| BS EN 13753:2009 | Products used for treatment of water intended for human consumption. Granular activated alumina |
| BS EN 1018 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE |
| CEN ISO/TS 27687:2009 | Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008, Corrected version 2009-02-01) |
| EN 13263-1:2005+A1:2009 | Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
| BS ISO 26824:2013 | Particle characterization of particulate systems. Vocabulary |
| 17/30356313 DC : 0 | BS ISO 21755-1 - MOTORCYCLES - MEASUREMENT METHOD FOR EVAPORATIVE EMISSIONS - PART 1: SHED TEST PROCEDURE |
| 16/30323504 DC : DRAFT JAN 2016 | BS EN 16966 - WORKPLACE EXPOSURE - METRICS TO BE USED FOR THE MEASUREMENTS OF EXPOSURE TO INHALED NANOPARTICLES (NANO-OBJECTS AND NANOSTRUCTURED MATERIALS) SUCH AS MASS CONCENTRATION, NUMBER CONCENTRATION AND SURFACE AREA CONCENTRATION |
| 12/30263752 DC : 0 | BS ISO 12154 - DETERMINATION OF DENSITY BY VOLUMETRIC DISPLACEMENT - SKELETON DENSITY BY GAS PYCNOMETRY |
| PD ISO/TS 11937:2012 | Nanotechnologies. Nanoscale titanium dioxide in powder form. Characteristics and measurement |
| EN 1018:2013+A1:2015 | Chemicals used for treatment of water intended for human consumption - Calcium carbonate |
| 16/30311732 DC : 0 | BS ISO 12800 - NUCLEAR FUEL TECHNOLOGY - GUIDE TO THE MEASUREMENT OF THE SPECIFIC SURFACE AREA OF URANIUM OXIDE POWDERS BY THE BET METHOD |
| 14/30299224 DC : 0 | BS ISO 18473-1 - FUNCTIONAL PIGMENTS AND EXTENDERS FOR SPECIAL APPLICATIONS - PART 1: NANOSCALE CALCIUM CARBONATE FOR SEALANT APPLICATION |
| BS 8471:2007 | Guide to particle sizing methods |
| 02/104525 DC : DRAFT JULY 2002 | EN 13263-1 - SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| 13/30282202 DC : 0 | BS EN 16622 - HYDRAULIC SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| PREN 197-1 : DRAFT 2014 | CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS |
| DIN EN 16622:2016-02 | SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| UNI EN 16357 : 2013 | CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| I.S. EN 15029:2012 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) HYDROXIDE OXIDE |
| S.R. CEN/TR 16912:2016 | GUIDELINES FOR A PROCEDURE TO SUPPORT THE EUROPEAN STANDARDIZATION OF CEMENTS |
| ISO 26824:2013 | Particle characterization of particulate systems — Vocabulary |
| ISO 21340:2017 | Test methods for fibrous activated carbon |
| ISO/TR 19716:2016 | Nanotechnologies Characterization of cellulose nanocrystals |
| PREN 16966 : DRAFT 2016 | WORKPLACE EXPOSURE - METRICS TO BE USED FOR THE MEASUREMENTS OF EXPOSURE TO INHALED NANOPARTICLES (NANO-OBJECTS AND NANOSTRUCTURED MATERIALS) SUCH AS MASS CONCENTRATION, NUMBER CONCENTRATION AND SURFACE AREA CONCENTRATION |
| DIN EN 1018:2015-05 | Chemicals used for treatment of water intended for human consumption - Calcium carbonate (includes Amendment A1:2015) |
| DIN EN 14369:2015-06 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON-COATED GRANULAR ACTIVATED ALUMINA |
| I.S. EN 14369:2015 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON-COATED GRANULAR ACTIVATED ALUMINA |
| I.S. EN 197-1:2011 | CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS |
| I.S. EN 13753:2009 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GRANULAR ACTIVATED ALUMINA |
| I.S. EN 1018:2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE |
| DIN EN 12878:1999-09 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 197-1:2011-11 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| I.S. EN 13263-1:2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| I.S. EN 12878:2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| UNI EN 12878 : 2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| VDI 3674:2013-04 | Waste gas cleaning by adsorption - Process gas and waste gas cleaning |
| VDI 2286 Blatt 1:2013-08 | Emission control - Electrolytic aluminium reduction process |
| VDI 3476 Blatt 1:2015-06 | Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals |
| VDI 3405 Blatt 2.3:2017-07 (Draft) | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Characterisation of powder raw material |
| UNI EN 15029 : 2013 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) HYDROXIDE OXIDE |
| I.S. EN ISO 18757:2005 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF SPECIFIC SURFACE AREA OF CERAMIC POWDERS BY GAS ADSORPTION USING THE BET METHOD |
| BS ISO 18473-2 : 2015 | FUNCTIONAL PIGMENTS AND EXTENDERS FOR SPECIAL APPLICATIONS - PART 2: NANOSCALE TITANIUM DIOXIDE FOR SUNSCREEN APPLICATION |
| BS EN 16357:2013 | Carbonate liming materials. Determination of reactivity. Automatic titration method with citric acid |
| 17/30250386 DC : 0 | BS ISO 17327-1 - NON-ACTIVE SURGICAL IMPLANTS - IMPLANT COATING - PART 1: GENERAL REQUIREMENTS |
| 17/30358420 DC : 0 | BS ISO 22146 - CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| 14/30299228 DC : 0 | BS ISO 18473-2 - FUNCTIONAL PIGMENTS AND EXTENDERS FOR SPECIAL APPLICATIONS - PART 2: NANOSCALE TITANIUM DIOXIDE FOR SUNSCREEN APPLICATION |
| PD CEN ISO/TS 27687:2009 | Nanotechnologies. Terminology and definitions for nano-objects. Nanoparticle, nanofibre and nanoplate |
| BS ISO 21340:2017 | Test methods for fibrous activated carbon |
| 14/30300225 DC : DRAFT JUNE 2014 | BS EN 197-1 - CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS |
| DD CEN ISO/TS 27687 : 2009 | NANOTECHNOLOGIES - TERMINOLOGY AND DEFINITIONS FOR NANO-OBJECTS - NANOPARTICLE, NANOFIBRE AND NANOPLATE |
| BS ISO 15901-2:2006 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Analysis of mesopores and macropores by gas adsorption |
| PD 6699-1:2007 | Nanotechnologies Good practice guide for specifying manufactured nanomaterials |
| BS EN ISO 17296-3:2016 | Additive manufacturing. General principles Main characteristics and corresponding test methods |
| 17/30335516 DC : 0 | BS ISO 18473-3 - FUNCTIONAL PIGMENTS AND EXTENDERS FOR SPECIAL APPLICATION - PART 3: FUMED SILICA FOR SILICONE RUBBER APPLICATION |
| ISO/TS 11931:2012 | Nanotechnologies — Nanoscale calcium carbonate in powder form — Characteristics and measurement |
| I.S. EN 16622:2015 | SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| ASTM C 1274 : 2012 : REDLINE | Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption |
| ISO 18473-3:2018 | Functional pigments and extenders for special application — Part 3: Fumed silica for silicone rubber application |
| ISO/TS 12805:2011 | Nanotechnologies — Materials specifications — Guidance on specifying nano-objects |
| ISO 18852:2015 | Rubber compounding ingredients Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) |
| DIN EN 13263-1:2009-07 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| DIN EN 12878:2014-07 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
| EN 13753:2009 | Products used for treatment of water intended for human consumption - Granular activated alumina |
| UNI EN 13263-1 : 2009 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| UNI EN 197-1 : 2011 | CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS |
| UNI CEN ISO/TS 27687 : 2010 | NANOTECHNOLOGIES - TERMINOLOGY AND DEFINITIONS FOR NANO-OBJECTS - NANOPARTICLE, NANOFIBRE AND NANOPLATE |
| I.S. EN 14344:2004 | |
| UNI EN 13753 : 2009 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GRANULAR ACTIVATED ALUMINA |
| PREN 12878 : DRAFT 2012 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| PD CEN ISO/TS 17200:2015 | Nanotechnology. Nanoparticles in powder form. Characteristics and measurements |
| UNE-EN 16622:2016 | Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
| BS EN 15029:2012 | Products used for treatment of water intended for human consumption. Iron (III) hydroxide oxide |
| 04/30116586 DC : DRAFT JUL 2004 | ISO 15901-2 - PORE SIZE DISTRIBUTION AND POROSIMETRY OF MATERIALS - EVALUATION BY MERCURY POSIMETRY AND GAS ADSORPTION - PART 2: ANALYSIS OF MESO-PORES AND MACRO-PORES BY GAS ADSORPTION |
| 12/30268248 DC : 0 | BS EN 1018 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE |
| ISO 15901-3:2007 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 3: Analysis of micropores by gas adsorption |
| DIN EN 15029:2013-01 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) HYDROXIDE OXIDE |
| PD CEN ISO/TS 80004-6:2015 | Nanotechnologies. Vocabulary Nano-object characterization |
| BS EN 16622:2015 | Silica-calcium fume for concrete. Definitions, requirements and conformity criteria |
| BS ISO 12800:2017 | Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method |
| PD CEN ISO/TS 80004-2:2017 | Nanotechnologies. Vocabulary Nano-objects |
| ASTM E 2864 : 2013 | Standard Test Method for Measurement of Airborne Metal and Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption |
| DIN CEN ISO/TS 27687:2008-11 | NANOTECHNOLOGIES - TERMINOLOGY AND DEFINITIONS FOR NANO-OBJECTS - NANOPARTICLE, NANOFIBRE AND NANOPLATE |
| PREN 13043 : DRAFT 2015 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| I.S. EN 16357:2013 | CARBONATE LIMING MATERIALS - DETERMINATION OF REACTIVITY - AUTOMATIC TITRATION METHOD WITH CITRIC ACID |
| PREN 1018 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE |
| UNE-EN 15029:2013 | Products used for treatment of water intended for human consumption - Iron (III) hydroxide oxide |
| ISO 12154:2014 | Determination of density by volumetric displacement — Skeleton density by gas pycnometry |
| ISO/TR 18196:2016 | Nanotechnologies — Measurement technique matrix for the characterization of nano-objects |
| ISO/TS 11937:2012 | Nanotechnologies — Nanoscale titanium dioxide in powder form — Characteristics and measurement |
| ISO/TS 16195:2013 | Nanotechnologies Guidance for developing representative test materials consisting of nano-objects in dry powder form |
| BS EN 13263-1 : 2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| ISO/TS 80004-2:2015 | Nanotechnologies — Vocabulary — Part 2: Nano-objects |
| ISO/TS 80004-6:2013 | Nanotechnologies Vocabulary Part 6: Nano-object characterization |
| BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| UNE-CEN ISO/TS 27687:2010 | Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008) |
| ISO/TS 17200:2013 | Nanotechnology Nanoparticles in powder form Characteristics and measurements |
| ISO/TS 27687:2008 | Nanotechnologies Terminology and definitions for nano-objects Nanoparticle, nanofibre and nanoplate |
| BS EN 14369:2015 | Products used for treatment of water intended for human consumption. Iron-coated granular activated alumina |
| ISO 17296-3:2014 | Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods |
| UNE-EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| UNE-EN 14369:2015 | Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina |
| EN 15029:2012 | Products used for treatment of water intended for human consumption - Iron (III) hydroxide oxide |
| EN 16622:2015 | Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
| EN ISO 18757:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003) |
| EN 16357:2013 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
| EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
| EN ISO 17296-3:2016 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN 14369:2015 | Products used for treatment of water intended for human consumption - Iron-coated granular activated alumina |
| BS ISO 17296-3 : 2014 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS |
| PD ISO/TS 11931:2012 | Nanotechnologies. Nanoscale calcium carbonate in powder form. Characteristics and measurement |
| ISO 18473-1:2015 | Functional pigments and extenders for special applications Part 1: Nanoscale calcium carbonate for sealant application |
| PD CEN/TR 16912:2016 | Guidelines for a procedure to support the European standardization of cements |
| BS ISO 12154:2014 | Determination of density by volumetric displacement. Skeleton density by gas pycnometry |
| 12/30256100 DC : 0 | BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| PD ISO/TR 19716:2016 | Nanotechnologies. Characterization of cellulose nanocrystals |
| PD ISO/TR 10993-22:2017 | Biological evaluation of medical devices Guidance on nanomaterials |
| 12/30257315 DC : 0 | BS EN 15029 - PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - IRON (3) HYDROXIDE OXIDE |
| BS ISO 18473-1 : 2015 | FUNCTIONAL PIGMENTS AND EXTENDERS FOR SPECIAL APPLICATIONS - PART 1: NANOSCALE CALCIUM CARBONATE FOR SEALANT APPLICATION |
| DIN EN 16357:2013-11 | Carbonate liming materials - Determination of reactivity - Automatic titration method with citric acid |
| 05/30132409 DC : DRAFT APR 2005 | ISO 15901-3 - PORE SIZE DISTRIBUTION AND POROSITY OF SOLID MATERIALS BY MERCURY POROSIMETRY AND GAS ADSORPTION - PART 3: ANALYSIS OF MICRO-PORES BY GAS ADSORPTION |
| I.S. EN ISO 17296-3:2016 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014) |
| CSA Z5100/Z5200 PACKAGE : 2017 | CONSISTS OF Z5100-17, CELLULOSE NANOMATERIALS - TEST METHODS FOR CHARACTERIZATION AND Z5200-17, CELLULOSE NANOMATERIALS - BLANK DETAIL SPECIFICATION |
| S.R. CEN ISO/TS 80004-2:2017 | NANOTECHNOLOGIES - VOCABULARY - PART 2: NANO-OBJECTS (ISO/TS 80004-2:2015) |
| ISO 15901-2:2006 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 2: Analysis of mesopores and macropores by gas adsorption |
| UNE-EN ISO 17296-3:2017 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| BS EN ISO 18757:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of specific surface area of ceramic powders by gas adsorption using the BET method |
| DIN EN 13753:2009-07 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GRANULAR ACTIVATED ALUMINA |
| CEN ISO/TS 17200:2015 | Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013) |
| CEN ISO/TS 80004-2:2017 | Nanotechnologies - Vocabulary - Part 2: Nano-objects (ISO/TS 80004-2:2015) |
| DIN EN ISO 18757:2006-01 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003) |
| UNE-EN 1018:2013 | Chemicals used for treatment of water intended for human consumption - Calcium carbonate |
| ISO 15901-3:2007 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 3: Analysis of micropores by gas adsorption |
| ISO 15901-2:2006 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 2: Analysis of mesopores and macropores by gas adsorption |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 8213:1986 | Chemical products for industrial use — Sampling techniques — Solid chemical products in the form of particles varying from powders to coarse lumps |
| ISO 15901-1:2016 | Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 1: Mercury porosimetry |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 14488:2007 | Particulate materials — Sampling and sample splitting for the determination of particulate properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.