ISO 836:2001
Current
Current
The latest, up-to-date edition.
Terminology for refractories
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, English - French
Published date
03-15-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This International Standard describes terms used in International Standards dealing with refractory materials and products and that assist in the understanding of the terms and the standards themselves. The descriptions are those generally understood within the refractories industry and should not be taken as absolute definitions.
| DevelopmentNote |
Supersedes ISO/R 836:1968 (05/2001)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BIS IS 4041 : 2006 | Identical |
| BS 3446:1962 | Similar to |
| BS ISO 10081-4:2007 | Classification of dense shaped refractory products Special products |
| DIN EN ISO 20182:2008-04 | Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008) |
| 02/123018 DC : DRAFT NOV 2002 | ISO 20182 - REFRACTORY TEST PIECE PREPARATION - GUNNING REFRACTORIES BY THE PNEUMATIC-NOZZLE MIXING TYPE GUNS |
| I.S. EN ISO 10081-4:2014 | CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 4: SPECIAL PRODUCTS (ISO 10081-4:2014) |
| ISO 20310:2018 | Thermal insulation for building equipment and industrial installations — Aluminosilicate wool products — Specification |
| BS EN ISO 21078-2:2007 | Determination of boron (III) oxide in refractory products Acid extraction method for the determination of boron (III) oxide in binder components |
| CEN ISO/TS 80004-8:2015 | Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013) |
| EN 12698-2:2007 | Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods |
| DIN EN 12698-1:2007-06 | Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods |
| EN 12698-1:2007 | Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods |
| DIN EN 12698-2:2007-06 | Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods |
| EN ISO 26845:2008 | Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008) |
| DIN EN ISO 21078-2:2007-12 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 2: ACID EXTRACTION METHOD FOR THE DETERMINATION OF BORON(3) OXIDE IN BINDER COMPONENTS |
| NF EN ISO 21078-2 : 2009 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 2: ACID EXTRACTION METHOD FOR THE DETERMINATION OF BORON(3) OXIDE IN BINDER COMPONENTS |
| NF EN ISO 26845 : 2008 | CHEMICAL ANALYSIS OF REFRACTORIES - GENERAL REQUIREMENTS FOR WET CHEMICALS ANALYSIS, ATOMIC ABSORPTION SPECTROMETRY (AAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP-AES) METHODS |
| BS ISO 22016:2015 | Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods |
| 05/30079469 DC : DRAFT JAN 2005 | ISO 2245 - SHAPED INSULATING REFRACTORY PRODUCTS - CLASSIFICATION |
| 15/30284782 DC : 0 | BS ISO 18886 - REFRACTORY TEST-PIECE PREPARATION - GUNNING REFRACTORY PANELS BY WET GUNNING TECHNIQUES |
| DIN EN ISO 26845:2008-06 | CHEMICAL ANALYSIS OF REFRACTORIES - GENERAL REQUIREMENTS FOR WET CHEMICAL ANALYSIS, ATOMIC ABSORPTION SPECTROMETRY (AAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP-AES) METHODS |
| S.R. CEN ISO/TS 80004-8:2015 | NANOTECHNOLOGIES - VOCABULARY - PART 8: NANOMANUFACTURING PROCESSES (ISO/TS 80004-8:2013) |
| ISO 16334:2013 | Monolithic refractory products — Determination of resistance to explosive spalling |
| NF EN ISO 20182 : 2008 | REFRACTORY TEST PIECE PREPARATION - GUNNING REFRACTORY PANELS BY THE PNEUMATIC-NOZZLE MIXING TYPE GUNS |
| BS EN 12698-1:2007 | Chemical analysis of nitride bonded silicon carbide refractories Chemical methods |
| BS EN 12698-2:2007 | Chemical analysis of nitride bonded silicon carbide refractories XRD methods |
| ISO 10081-4:2014 | Classification of dense shaped refractory products — Part 4: Special products |
| ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes |
| PD CEN ISO/TS 80004-8:2015 | Nanotechnologies. Vocabulary Nanomanufacturing processes |
| NF EN ISO 21078-1 : 2008 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 1: DETERMINATION OF TOTAL BORON (3) OXIDE IN OXIDIC MATERIALS FOR CERAMICS, GLASS AND GLAZES |
| 13/30261093 DC : 0 | BS ISO 17942 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF BORON NITRIDE POWDERS |
| BS EN ISO 10081-4:2014 | Classification of dense shaped refractory products Special products |
| BS ISO 16334:2013 | Monolithic refractory products. Determination of resistance to explosivespalling |
| BS ISO 17942:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of boron nitride powders |
| ISO 16835:2014 | Refractory products — Determination of thermal expansion |
| I.S. EN ISO 21078-1:2008 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 1: DETERMINATION OF TOTAL BORON(3) OXIDE IN OXIDIC MATERIALS FOR CERAMICS, GLASS AND GLAZES |
| ISO 17942:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of boron nitride powders |
| ISO 2245:2006 | Shaped insulating refractory products Classification |
| ISO 20182:2008 | Refractory test-piece preparation — Gunning refractory panels by the pneumatic-nozzle mixing type guns |
| ISO 21078-2:2006 | Determination of boron(III) oxide in refractory products — Part 2: Acid extraction method for the determination of boron(III) oxide in binder components |
| EN ISO 21078-2:2007 | Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components (ISO 21078-2:2006) |
| DIN EN ISO 10081-4:2014-12 | Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014) |
| 05/30085737 DC : DRAFT JULY 2005 | ISO 21587-1 - WET CHEMICAL ANALYSIS OF ALUMINOSILICATE REFRACTORY PRODUCTS - PART 1: GENERAL METHODS |
| UNI EN ISO 10081-4 : 2014 | CLASSIFICATION OF DENSE SHAPED REFRACTORY PRODUCTS - PART 4: SPECIAL PRODUCTS |
| BS EN ISO 20182:2008 | Refractory testpiece preparation. Gunning refractory panels by the pneumatic-nozzle mixing type guns |
| BS EN ISO 26845:2008 | Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods |
| 06/30153327 DC : DRAFT JULY 2006 | BS ISO 20182 - REFRACTORY TEST PIECE PREPARATION - GUNNING REFRACTORY PANELS BY THE PNEUMATIC-NOZZLE MIXING TYPE GUNS |
| UNI EN ISO 21078-1 : 2008 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 1: DETERMINATION OF TOTAL BORON(3) OXIDE IN OXIDIC MATERIALS FOR CERAMICS, GLASS AND GLAZES |
| 13/30261099 DC : 0 | BS ISO 17947 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF FINE SILICON NITRIDE POWDERS |
| BS ISO 18886:2016 | Refractory test-piece preparation. Gunning refractory panels by wet gunning techniques |
| 14/30276977 DC : 0 | BS ISO 22016 - DETERMINATION OF SULFUR IN REFRACTORY PRODUCTS AND RAW MATERIALS BY GRAVIMETRIC, PHOTOMETRIC AND TITRIMETRIC METHODS |
| DIN EN ISO 21078-1:2008-04 | Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008) |
| ISO/TS 80004-8:2013 | Nanotechnologies Vocabulary Part 8: Nanomanufacturing processes |
| ISO 26845:2008 | Chemical analysis of refractories General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods |
| EN ISO 6817:1995 | Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992) |
| EN ISO 20182:2008 | Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns (ISO 20182:2008) |
| EN ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008) |
| DIN ISO 5018:1989-10 | REFRACTORY MATERIALS - DETERMINATION OF TRUE DENSITY |
| I.S. EN ISO 20182:2008 | REFRACTORY TEST-PIECE PREPARATION - GUNNING REFRACTORY PANELS BY THE PNEUMATIC-NOZZLE MIXING TYPE GUNS |
| ISO 18886:2016 | Refractory test-piece preparation Gunning refractory panels by wet gunning techniques |
| 12/30234138 DC : 0 | BS ISO 16334 - MONOLITHIC REFRACTORY PRODUCTS - DETERMINATION OF RESISTANCE TO EXPLOSIVE SPALLING |
| BS EN ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes |
| 06/30153824 DC : DRAFT JULY 2006 | ISO 26845 - CHEMICAL ANALYSIS OF REFRACTORIES - GENERAL REQUIREMENTS FOR WET CHEMICAL ANALYSIS, ATOMIC ABSORPTION SPECTROMETRY AND INDUCTIVELY COUPLED PLASMA METHODS |
| NF EN 12698-1 : 2008 | CHEMICAL ANALYSIS OF NITRIDE BONDED SILICON CARBIDE REFRACTORIES - PART 1: CHEMICAL METHODS |
| UNI EN ISO 26845 : 2008 | |
| UNI EN ISO 20182 : 2008 | REFRACTORY TEST-PIECE PREPARATION - GUNNING REFRACTORY PANELS BY THE PNEUMATIC-NOZZLE MIXING TYPE GUNS |
| 04/30079468 DC : DRAFT DEC 2004 | ISO 2245 - SHAPED INSULATING REFRACTORY PRODUCTS - CLASSIFICATION |
| ISO 2477:2005 | Shaped insulating refractory products — Determination of permanent change in dimensions on heating |
| ISO 22016:2015 | Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods |
| I.S. EN ISO 26845:2008 | CHEMICAL ANALYSIS OF REFRACTORIES - GENERAL REQUIREMENTS FOR WET CHEMICAL ANALYSIS, ATOMIC ABSORPTION SPECTROMETRY (AAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICPAES) METHODS |
| EN ISO 10081-4:2014 | Classification of dense shaped refractory products - Part 4: Special products (ISO 10081-4:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.