ISO 8085-2:2001
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
03-25-2019
Superseded by
ISO 4437-1:2014
ISO 4437-5:2014
ISO 4437-2:2014
ISO 4437-3:2014
Published date
09-13-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Supersedes ISO/FDIS 8085-2 (09/2001)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| BS ISO 8085-2:2001 | Identical |
| BS ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Electrofusion fittings |
| BS ISO 10838-3:2001 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm |
| 04/30126864 DC : DRAFT DEC 2004 | ISO 18225 - PLASTIC PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS |
| ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm |
| 04/30126871 DC : DRAFT DEC 2004 | ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTI-LAYERED PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR - PART 1: SPECIFICATIONS FOR SYSTEMS |
| 07/30170699 DC : DRAFT AUG 2007 | BS ISO 11414 - PLASTICS PIPES AND FITTINGS - PREPARATION OF POLYETHYLENE (PE) PIPE/PIPE OR PIPE/FITTING TEST PIECE ASSEMBLIES BY BUTT FUSION |
| UNI ISO 12176-4 : 2014 | PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 4: TRACEABILITY CODING |
| ISO 11413:2008 | Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| BS ISO 11414:2009 | Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| 07/30170567 DC : DRAFT AUG 2007 | BS ISO 11413 - PLASTICS PIPES AND FITTINGS - PREPARATION OF TEST PIECE ASSEMBLIES BETWEEN A POLYETHYLENE (PE) PIPE AND AN ELECTROFUSION FITTING |
| BS ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Fittings for socket fusion using heated tools |
| BS 2782-11:Method 1150E:1997 | Methods of testing plastics. Thermoplastics pipes, fittings and valves Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| BS 2782-11:Method 1150B:1998 | Methods of testing plastics. Thermoplastics pipes, fittings and valves Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| ISO 11414:2009 | Plastics pipes and fittings Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| ISO/TS 10839:2000 | Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation |
| BS ISO 10838-2:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Metal fittings for pipes of nominal outside diameter greater than 63mm |
| BS ISO 11413:2008 | Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 3: Electrofusion fittings |
| ISO 10838-2:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm |
| ISO 10838-3:2001 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm |
| BS ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Metal fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 21307:2011 | Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems |
| 10/30234867 DC : 0 | BS ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION |
| 05/30130517 DC : DRAFT MAR 2005 | ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION-JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION |
| ISO/TR 19480:2005 | Polyethylene pipes and fittings for the supply of gaseous fuels or water — Training and assessment of fusion operators |
| ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 1: Fittings for socket fusion using heated tools |
| ISO 12176-4:2003 | Plastics pipes and fittings Equipment for fusion jointing polyethylene systems Part 4: Traceability coding |
| ISO 13953:2001 | Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| ISO 6964:1986 | Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification |
| ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 3: Electrofusion fittings |
| ISO 161-1:1996 | Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series |
| ISO 12176-1:2017 | Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion |
| ISO 9080:2012 | Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| ISO 13477:2008 | Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test) |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| ISO 18553:2002 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| ISO/TS 10839:2000 | Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation |
| ISO 13479:2009 | Polyolefin pipes for the conveyance of fluids Determination of resistance to crack propagation Test method for slow crack growth on notched pipes |
| ISO 11414:2009 | Plastics pipes and fittings Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
| ISO 13478:2007 | Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST) |
| ISO 3126:2005 | Plastics piping systems Plastics components Determination of dimensions |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| ASTM D 4019 : 1994 : REV A | Standard Test Method for Moisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide (Withdrawn 2002) |
| ISO 9356:1989 | Polyolefin pipe assemblies with or without jointed fittings Resistance to internal pressure Test method |
| ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 1: Fittings for socket fusion using heated tools |
| ISO 1183-3:1999 | Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
| ISO 11357-6:2008 | Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
| ISO 1872-1:1993 | Plastics Polyethylene (PE) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels Metric series Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.