ISO 806:2004
Current
The latest, up-to-date edition.
Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C and 1 000 degrees C
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
10-12-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 806:2004 specifies a method for the determination of loss of mass on heating of aluminium oxide at 300 °C and further loss of mass on ignition at 1 000 °C. By industry convention, these mass losses are often referred to as "moisture (MOI)" and "loss on ignition (LOI)" respectively.
This method is suitable for calcined alumina in the range 0,2 % to 5 % loss of mass at 300 °C and 0,1 % to 2 % loss of mass at 1 000 °C.
This method provides for samples to be treated on an "as-received" basis for determination of actual MOI and LOI in alumina samples. To improve precision of analysis in cases where "as-received" results are not required, samples can be "air-equilibrated" prior to analysis. "Air-equilibration" can greatly affect MOI results and significantly alter LOI results. The "air-equilibration" procedure and its effects are discussed.
Instrumental methods are also discussed.
| Committee |
ISO/TC 226
|
| DevelopmentNote |
Supersedes ISO/DIS 806 and ISO 803 (10/2004)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 806:2004 | Identical |
| NEN ISO 806 : 2004 | Identical |
| BS 4140-3:1986 | Identical |
| NBN T 03 405 : 1983 | Identical |
| BS 4140-8:1986 | Methods of test for aluminium oxide Determination of absolute density using a pyknometer |
| 09/30196939 DC : 0 | BS ISO 12315 - ALUMINIUM OXIDE PRIMARILY USED FOR PRODUCTION OF ALUMINIUM - METHOD FOR CALCULATING THE AL[2]O[3] CONTENT OF SMELTER-GRADE ALUMINA |
| BS 4140-9:1986 | Methods of test for aluminium oxide Measurement of the angle of repose |
| BS ISO 12315:2010 | Aluminium oxide primarily used for production of aluminium. Method for calculating the Al<sub>2</sub>O<sub>3</sub> content of smelter-grade alumina |
| BS ISO 23202:2006 | Aluminium oxide used for the production of aluminium. Determination of particles passing a 20 micrometre aperture sieve |
| BS 4140-13:1986 | Methods of test for aluminium oxide Preparation of sample solution by treatment with hydrochloric acid under pressure |
| BS 4140-6:1980 | Methods of test for aluminium oxide Determination of titanium content |
| 05/30133220 DC : DRAFT MAY 2005 | ISO 230-3 - TEST CODE FOR MACHINE TOOLS - PART 3: DETERMINATION OF THERMAL EFFECTS |
| VDI 2286 Blatt 1:2013-08 | Emission control - Electrolytic aluminium reduction process |
| ISO 23202:2006 | Aluminium oxide used for the production of aluminium Determination of particles passing a 20 micrometre aperture sieve |
| BS 4140-1:1986 | Methods of test for aluminium oxide Preparation and storage of test samples |
| BS 4140-16:1986 | Methods of test for aluminium oxide Determination of zinc content by flame atomic absorption |
| BS ISO 18842:2015 | Aluminium oxide primarily used for the production of aluminium. Method for the determination of tapped and untapped density |
| ISO 18842:2015 | Aluminium oxide primarily used for the production of aluminium — Method for the determination of tapped and untapped density |
| 05/30119065 DC : DRAFT MAY 2005 | ISO 23202 - ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM - DETERMINATION OF PARTICLES PASSING A 20 MICRON APERTURE SIEVE |
| 13/30293301 DC : 0 | BS ISO 18842 - ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM - METHOD FOR THE DETERMINATION OF TAPPED AND UNTAPPED DENSITY |
| BS ISO 23201:2015 | Aluminium oxide primarily used for production of aluminium. Determination of trace elements. Wavelength dispersive X-ray fluorescence spectrometric method |
| BS 4140-7:1986 | Methods of test for aluminium oxide Determination of iron content |
| BS 4140-22:1980 | Methods of test for aluminium oxide Determination of manganese content |
| BS 4140-5:1986 | Methods of test for aluminium oxide Determination of silica content |
| BS 4140-4:1986 | Methods of test for aluminium oxide Preparation of sample solution by alkaline fusion |
| ISO 12315:2010 | Aluminium oxide primarily used for production of aluminium — Method for calculating the Al2O3 content of smelter-grade alumina |
| BS 4140-12:1986 | Methods of test for aluminium oxide Determination of vanadium content |
| BS 4140-11:1986 | Methods of test for aluminium oxide Determination of sodium content |
| BS 4140-10:1986 | Methods of test for aluminium oxide Determination of untamped density |
| ISO 23201:2015 | Aluminium oxide primarily used for production of aluminium — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.