ISO 7886-1:2017
Current
Current
The latest, up-to-date edition.
Sterile hypodermic syringes for single use — Part 1: Syringes for manual use
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
05-03-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 7886-1:2017 specifies requirements and test methods for verifying the design of empty sterile single-use hypodermic syringes, with or without needle, made of plastic or other materials and intended for the aspiration and injection of fluids after filling by the end-users. This document does not provide requirements for lot release. The syringes are primarily for use in humans.
Sterile syringes specified in this document are intended for use immediately after filling and are not intended to contain the medicament for extended periods of time.
It excludes syringes for use with insulin (see ISO 8537), single-use syringes made of glass, syringes for use with power-driven syringe pumps, syringes pre-filled by the manufacturer, and syringes intended to be stored after filling (e.g. in a kit for filling by a pharmacist).
Hypodermic syringes without a needle specified in this document are intended for use with hypodermic needles specified in ISO 7864.
| Committee |
ISO/TC 84
|
| DevelopmentNote |
Supersedes ISO/DIS 7886-1. (05/2017)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| BS ISO 11040-6:2012 | Prefilled syringes Plastic barrels for injectables |
| 10/30212297 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES |
| 13/30276989 DC : 0 | BS EN ISO 11070 - STERILE, SINGLE-USE INTRAVASCULAR CATHETER INTRODUCERS |
| 03/113406 DC : DRAFT OCT 2003 | ISO 7886-3 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED DOSE IMMUNIZATION |
| UNI EN 13976-2 : 2011 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| 12/30266576 DC : 0 | BS EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES |
| 17/30350521 DC : 0 | BS EN ISO 7886-4 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
| I.S. EN ISO 10555-1:2013 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017) |
| EN ISO 7886-4:2009 | Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006) |
| EN ISO 22413:2013 | Transfer sets for pharmaceutical preparations - Requirements and test methods (ISO 22413:2010) |
| I.S. EN ISO 22413:2013 | TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS (ISO 22413:2010) |
| AAMI CN6 : 2015 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS |
| UNI EN ISO 7886-4 : 2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
| UNE-EN ISO 80369-6:2016 | Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications (ISO 80369-6:2016, Corrected version 2016-11-15) |
| DIN EN ISO 11070:2015-03 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014) |
| EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| ISO 80369-3:2016 | Small-bore connectors for liquids and gases in healthcare applications — Part 3: Connectors for enteral applications |
| DIN EN ISO 7886-4:2010-01 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
| DIN EN ISO 21649:2010-01 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| ISO 12505-1:2014 | Skin barrier for ostomy aids Test methods Part 1: Size, surface pH and water-absorbency |
| 17/30345938 DC : 0 | BS ISO 20698 - CATHETER SYSTEMS FOR NEURAXIAL APPLICATION - STERILE AND SINGLE-USE CATHETERS AND ACCESSORIES |
| I.S. EN ISO 80369-6:2016 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO/IEC/DIS 80369-6:2014) |
| 17/30357741 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| BS ISO 11040-4:2015 | Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| BS EN ISO 80369-3:2016 | Small-bore connectors for liquids and gases in healthcare applications Connectors for enteral applications |
| ISO 20905:2004 | Coal preparation — Determination of dust/moisture relationship for coal |
| BS EN ISO 10555-1 : 2013 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS |
| ISO 80369-6:2016 | Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications |
| UNE-EN 13976-2:2011 | Rescue systems - Transportation of incubators - Part 2: System requirements |
| BS EN ISO 11070 : 2014 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES |
| I.S. EN ISO 80369-3:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 3: CONNECTORS FOR ENTERAL APPLICATIONS (ISO/IEC/DIS 80369-3:2014) |
| ISO 11040-8:2016 | Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes |
| I.S. EN ISO 11070:2014 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014) |
| ISO 11070:2014 | Sterile single-use intravascular introducers, dilators and guidewires |
| BS EN ISO 80369-6:2016 | Small bore connectors for liquids and gases in healthcare applications Connectors for neuraxial applications |
| BS EN ISO 7886-4:2009 | Sterile hypodermic syringes for single use Syringes with re-use prevention feature |
| BS EN ISO 8871-1:2004 | Elastomeric parts for parenterals and for devices for pharmaceutical use Extractables in aqueous autoclavates |
| UNE-EN ISO 11608-3:2013 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
| BS EN ISO 7886-3:2009 | Sterile hypodermic syringes for single use Auto-disable syringes for fixed-dose immunization |
| DIN EN ISO 7886-3:2010-01 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
| UNI EN ISO 7886-3 : 2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
| I.S. EN ISO 21649:2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11608-3:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS (ISO 11608-3:2012) |
| UNI EN ISO 11070 : 2015 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES |
| 16/30339096 DC : 0 | BS EN ISO 7886-3 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
| 13/30284773 DC : 0 | BS EN ISO 8536-10 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT |
| 13/30273499 DC : 0 | BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| 02/564517 DC : DRAFT OCT 2002 | BS EN ISO 8536-10 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR USE WITH PRESSURE INFUSION EQUIPMENT |
| 11/30228364 DC : 0 | BS EN ISO 10555-1 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 22413:2013-10 | Transfer sets for pharmaceutical preparations - Requirements and test methods (ISO 22413:2010) |
| ISO 7886-4:2006 | Sterile hypodermic syringes for single use Part 4: Syringes with re-use prevention feature |
| NF EN ISO 7886-3 : 2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
| DIN EN 13718-2:2015-05 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| BS EN ISO 21649:2009 | Needle-free injectors for medical use. Requirements and test methods |
| UNE-EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| ISO 21649:2006 | Needle-free injectors for medical use — Requirements and test methods |
| EN ISO 7886-3:2009 | Sterile hypodermic syringes for single use - Part 3: Auto-disable syringes for fixed-dose immunization (ISO 7886-3:2005) |
| I.S. EN ISO 7886-3:2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
| ONORM EN 13718-2 : 2015 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| UNI EN ISO 11608-3 : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS |
| PREN 13976-2 : DRAFT 2016 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| UNI EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| 15/30304642 DC : 0 | BS ISO 11040-8 - PREFILLED SYRINGES - PART 8: REQUIREMENTS AND TEST METHODS FOR FINISHED PRIFILLED SYRINGES |
| ANSI/AAMI/ISO 80369-3:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 3: CONNECTORS FOR ENTERAL APPLICATIONS |
| BS ISO 7886-2 : 1996 AMD 9835 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS |
| BS ISO 12505-1:2014 | Skin barrier for ostomy aids. Test methods Size, surface pH and water-absorbency |
| 16/30333925 DC : 0 | BS EN 13976-2 - RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| UNE-EN ISO 80369-3:2017 | Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016) |
| 10/30197474 DC : 0 | BS ISO 12505 - SKIN BARRIER FOR OSTOMY AIDS - TEST METHODS |
| BS EN ISO 22413:2013 | Transfer sets for pharmaceutical preparations. Requirements and test methods |
| ANSI/AAMI/ISO 80369-6:2016 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS |
| ISO 11040-4:2015 | Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| I.S. EN ISO 7886-4:2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
| I.S. EN 13976-2:2011 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| BS EN 13976-2:2011 | Rescue systems. Transportation of incubators System requirements |
| BS EN ISO 7886-2:1997 | Sterile hypodermic syringes for single use Syringes for use with power-driven syringe pumps |
| BS EN ISO 11608-3:2012 | Needle-based injection systems for medical use. Requirements and test methods Finished containers |
| UNE-EN ISO 22413:2013 | Transfer sets for pharmaceutical preparations - Requirements and test methods (ISO 22413:2010) |
| BS EN 13718-2:2015 | Medical vehicles and their equipment. Air ambulances Operational and technical requirements for air ambulances |
| UNE-EN ISO 11070:2015 | Sterile single-use intravascular introducers, dilators and guidewires (ISO 11070:2014) |
| EN ISO 7886-2:1997 | Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996) |
| I.S. EN 13718-2:2015 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| ISO 8871-1:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates |
| ISO 11608-3:2012 | Needle-based injection systems for medical use Requirements and test methods Part 3: Finished containers |
| I.S. EN 13718-2:2015+A1:2020 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| BS EN 30-1-2:2012 | Domestic cooking appliances burning gas. Safety Appliances having forced-convection ovens and/or grills |
| EN 30-1-2:2012 | Domestic cooking appliances burning gas - Safety - Part 1-2: Appliances having forced-convection ovens and/or grills |
| EN ISO 21649:2009 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN 1707:1996 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings |
| EN ISO 80369-3:2016 | Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016) |
| EN ISO 11608-3:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
| EN ISO 8871-1:2004 | Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates (ISO 8871-1:2003) |
| ONORM EN ISO 11070 : 2015 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014) |
| 03/301319 DC : 0 | ISO 20905 - COAL PREPARATION - DETERMINATION OF DUST/MOISTURE RELATIONSHIP FOR COAL |
| ISO 11040-6:2012 | Prefilled syringes Part 6: Plastic barrels for injectables |
| DIN ISO 11040-4:2007-10 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| BS ISO 22413:2010 | Transfer sets for pharmaceutical preparations. Requirements and test methods |
| 03/113382 DC : DRAFT SEP 2003 | BS EN ISO 21649 - NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| ISO 10555-1:2013 | Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements |
| EN ISO 80369-6 : 2016 COR 2016 | SMALL BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 6: CONNECTORS FOR NEURAXIAL APPLICATIONS (ISO 80369-6:2016, CORRECTED VERSION 2016-11-15) |
| NF EN ISO 7886-4 : 2009 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 4: SYRINGES WITH RE-USE PREVENTION FEATURE |
| EN 13976-2:2011 | Rescue systems - Transportation of incubators - Part 2: System requirements |
| DIN EN 13976-2:2016-03 (Draft) | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| ISO 22413:2010 | Transfer sets for pharmaceutical preparations Requirements and test methods |
| DIN EN ISO 11608-3:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
| UNI EN ISO 22413 : 2013 | TRANSFER SETS FOR PHARMACEUTICAL PREPARATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13976-2:2011-08 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 2: SYSTEM REQUIREMENTS |
| DIN ISO 11040-4:2017-07 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 15223-2:2010 | Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation |
| ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin |
| ISO 80369-20:2015 | Small-bore connectors for liquids and gases in healthcare applications Part 20: Common test methods |
| ISO 384:2015 | Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments |
| ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
| ISO 7864:2016 | Sterile hypodermic needles for single use — Requirements and test methods |
| ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
| ISO 80369-7:2016 | Small-bore connectors for liquids and gases in healthcare applications Part 7: Connectors for intravascular or hypodermic applications |
| ISO 23908:2011 | Sharps injury protection Requirements and test methods Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.