ISO 7779:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-27-2019
Superseded by
Language(s)
English, French
Published date
07-29-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 7779:2010 specifies procedures for measuring and reporting the noise emission of information technology and telecommunications equipment.
The basic emission quantity is the A-weighted sound power level which may be used for comparing equipment of the same type but from different manufacturers, or for comparing different equipment.
Three basic noise emission standards for determination of the sound power levels are specified in ISO 7779:2010 in order to avoid undue restriction on existing facilities and experience. ISO 3741 specifies comparison measurements in a reverberation test room; ISO 3744 and ISO 3745 specify measurements in an essentially free field over a reflecting plane. Any one of these three basic noise emission standards can be selected and used exclusively in accordance with ISO 7779:2010 when determining sound power levels of a machine.
The A-weighted sound power level is supplemented by the A-weighted emission sound pressure level determined at the operator position(s) or the bystander positions, based on basic noise emission standard ISO 11201. This sound pressure level is not a worker's immission rating level, but it can assist in identifying any potential problems that could cause annoyance, activity interference, or hearing damage to operators and bystanders.
Methods for determination of whether the noise emission includes prominent discrete tones or is impulsive in character are specified in annexes.
ISO 7779:2010 is suitable for type tests and provides methods for manufacturers and testing laboratories to obtain comparable results.
The methods specified in ISO 7779:2010 allow the determination of noise emission levels for a functional unit tested individually.
The procedures apply to equipment which emits broadband noise, narrowband noise and noise which contains discrete-frequency components, or impulsive noise.
The sound power and emission sound pressure levels obtained can serve noise emission declaration and comparison purposes (see ISO 9296).
If sound power levels obtained are determined for a number of functional units of the same production series, they can be used to determine a statistical value for that production series (see ISO 9296).
| DevelopmentNote |
DRAFT ISO/DIS 7779 is also available for this standard. (07/2017)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| JIS X 7779:2012 | Identical |
| ONORM EN ISO 7779 : 2010 | Identical |
| PN EN ISO 7779 : 2010 | Identical |
| BS EN ISO 7779:2010 | Identical |
| NS EN ISO 7779 : 1ED 2010 | Identical |
| NEN EN ISO 7779 : 2010 | Identical |
| UNI EN ISO 7779 : 2010 | Identical |
| UNE-EN ISO 7779:2011 | Identical |
| I.S. EN ISO 7779:2010 | Identical |
| NBN EN ISO 7779 : 2010 | Identical |
| EN ISO 7779:2010 | Identical |
| NF EN ISO 7779 : 2010 | Identical |
| NFS 31 072 : LATEST | Identical |
| SN EN ISO 7779 : 2010 | Identical |
| NF EN 27779 : 1992 | Identical |
| I.S. EN 27779:1992 | Identical |
| NEN ISO 7779 : 1992 | Identical |
| DIN EN 27779:1991-11 | Corresponds |
| EN 27779 : 1991 | Identical |
| NBN EN 27779 : 1992 | Identical |
| DIN EN ISO 7779:2011-01 | Identical |
| SAC GB/T 18313 : 2001 | Identical |
| BS 7135-1:1989 | Identical |
| UNE 74158:1995 | Similar to |
| NS ISO 7779 : 1ED 1988 | Identical |
| DIN 45635-19:1989-09 | Similar to |
| ISO/IEC 14473:1999 | Information technology — Office equipment — Minimum information to be specified for image scanners |
| INCITS/ISO/IEC 21118 : 2013 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - DATA PROJECTORS |
| ECMA 341 : 4ED 2010 | ENVIRONMENTAL DESIGN CONSIDERATIONS FOR ICT & CE PRODUCTS |
| BS 848-2.6:2000 | Fans for general purposes. Methods of noise testing Airborne noise emitted by small air-moving devices |
| BS ISO/IEC 11159:1992 | Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines |
| INCITS/ISO/IEC 11159 : 1996 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
| INCITS/ISO/IEC 21117 : 2013 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - COPYING MACHINES AND MULTI-FUNCTION DEVICES - INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS AND RELATED TEST METHODS |
| ISO 28961:2012 | Acoustics — Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions |
| ISO/IEC 15404:2000 | Information technology — Office machines — Minimum information to be included in specification sheets — Facsimile equipment |
| IEC 61947-2:2001 | Electronic projection - Measurement and documentation of key performance criteria - Part 2: Variable resolution projectors |
| IEC 61969-1:2011 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| I.S. EN ISO 4871:2009 | ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| EN 62040-5-3:2017 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| EN 61947-1:2002 | Electronic projection - Measurement and documentation of key performance criteria - Part 1: Fixed resolution projectors |
| DIN EN ISO 4871:2009-11 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| ASA/ANSI S12.11:2013/Part 2/ISO 10302-2:2011(R2023) | Acoustics – Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices – Part 2: Structure-borne vibration measurements |
| IPC 9592 : B | REQUIREMENTS FOR POWER CONVERSION DEVICES FOR THE COMPUTER AND TELECOMMUNICATIONS INDUSTRIES |
| A-A-58047 Revision D:2016 | SIGNAL GENERATOR |
| ECMA 160 : 2ED 92 | DETERMINATION OF SOUND POWER LEVELS OF COMPUTER AND BUSINESS EQUIPMENT USING SOUND INTENSITY MEASUREMENTS; SCANNING METHOD IN CONTROLLED ROOMS |
| 10/30236476 DC : 0 | BS ISO/IEC 21118 - INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - DATA PROJECTORS |
| BS ISO 28961:2012 | Acoustics. Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions |
| BS EN 62310-3:2008 | Static transfer systems (STS) Method for specifying performance and test requirements |
| BS EN 62075:2012 | Audio/video, information and communication technology equipment. Environmentally conscious design |
| ISO/IEC 11160-2:2013 | Information technology Office equipment Minimum information to be included in specification sheets Printers Part 2: Class 3 and Class 4 printers |
| BS ISO 10302-2:2011 | Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Structure-borne vibration measurements |
| NF EN 62310-3 : 2008 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| 12/30260137 DC : 0 | BS ISO/IEC 11160-2 - INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - PRINTERS - PART 2: CLASS 3 AND CLASS 4 PRINTERS |
| ANSI INCITS 397 VOL-1 : 2005 | |
| BS ISO/IEC 11160-2:2013 | Information technology. Office equipment. Minimum information to be included in specification sheets. Printers Class 3 and Class 4 printers |
| BS ISO 9296:2017 | Acoustics. Declared noise emission values of information technology and telecommunications equipment |
| 14/30297921 DC : 0 | BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS |
| BS EN 62040-5-3:2017 | Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements |
| INCITS/ISO/IEC 11159 : 1996 : R2004 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
| BS ISO/IEC 21118:2012 | Information technology. Office equipment |
| MIL-PRF-28800 Revision F:1996 | TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| INCITS/ISO/IEC 11160-1 : 1996 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - PRINTERS - PART 1: CLASS 1 AND CLASS 2 PRINTERS |
| I.S. EN 62040-5-3:2017 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS |
| TR 101 075 : 4.2.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2); BASE STATION AND ANCILLARY EQUIPMENT; PHYSICAL AND ELECTRICAL PARAMETERS; APPLICATION OF STANDARDS AND GUIDANCE NOTES (GSM 11.22 VERSION 4.2.0) |
| I.S. EN 62040-3:2011 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| OVE/ONORM EN 61969-1 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES (IEC 61969-1:2011) |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO/IEC 11159:1996 | Information technology — Office equipment — Minimum information to be included in specification sheets — Copying machines |
| ECMA 275 : 3ED 2015 | MEASUREMENT OF STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR MOVING DEVICES |
| I.S. EN ISO/IEC 11159:1998 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
| I.S. EN ISO 1680:2013 | ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013) |
| OVE/ONORM EN 62040-3 : 2012 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS (IEC 62040-3:2011) |
| ANSI S12.11 : 1987 | METHODS FOR THE MEASUREMENT OF NOISE EMITTED BY SMALL AIR-MOVING DEVICES |
| BS ISO 6198:1993 | Micrographics. Readers for transparent microforms. Performance characteristics |
| ECMA 74 : 14ED 2017 | MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| BS ISO 10302-1:2011 | Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Airborne noise measurement |
| 11/30246444 DC : 0 | BS EN 62075 ED 2.0 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| UNI ISO 28961 : 2012 | ACOUSTICS - STATISTICAL DISTRIBUTION OF HEARING THRESHOLDS OF OTOLOGICALLY NORMAL PERSONS IN THE AGE RANGE FROM 18 YEARS TO 25 YEARS UNDER FREE-FIELD LISTENING CONDITIONS |
| I.S. EN ISO 9295:2015 | ACOUSTICS - DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY MACHINERY AND EQUIPMENT (ISO 9295:2015) |
| BS EN 61969-1:2012 | Mechanical structures for electronic equipment. Outdoor enclosures Design guidelines |
| EN 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| BS EN 62040-3:2011 | Uninterruptible power systems (UPS) Method of specifying the performance and test requirements |
| I.S. EN 61947-1:2002 | ELECTRONIC PROJECTION - MEASUREMENT AND DOCUMENTATION OF KEY PERFORMANCE CRITERIA - PART 1: FIXED RESOLUTION PROJECTORS |
| ISO/IEC 21118:2012 | Information technology Office equipment Information to be included in specification sheets Data projectors |
| ANSI S12.11-2 : 2013 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 2: STRUCTURE-BORNE VIBRATION MEASUREMENTS |
| ANSI S12.11-1 : 2013 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 1: AIRBORNE NOISE MEASUREMENT |
| ISO/IEC 24739-1:2009 | Information technology AT Attachment with Packet Interface - 7 Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1) |
| ECMA 275-1 : 4ED 2017 | MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 1: AIRBORNE NOISE MEASUREMENT |
| ASTM F 963 : 2017 : REDLINE | Standard Consumer Safety Specification for Toy Safety |
| ISO 9296:2017 | Acoustics — Declared noise emission values of information technology and telecommunications equipment |
| DIN EN ISO 1680:2014-04 | ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013) |
| UNE-EN ISO 11203:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| EN 61969-1:2012 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines |
| EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| UNI EN ISO 11203 : 2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
| I.S. EN ISO 11203:2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
| UNI EN ISO 4871 : 2009 | ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| UNI EN ISO 1680 : 2014 | ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES |
| ISO 6198:1993 | Micrographics Readers for transparent microforms Performance characteristics |
| 14/30291684 DC : 0 | BS ISO 9296 - ACOUSTICS - DECLARED NOISE EMISSION VALUES OF INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS |
| CEI EN 61947-2 : 2002 | ELECTRONIC PROJECTION - MEASUREMENT AND DOCUMENTATION OF KEY PERFORMANCE CRITERIA - PART 2: VARIABLE RESOLUTION PROJECTORS (IEC 61947-2:2001) |
| 07/30098123 DC : 0 | BS ISO 10302-1 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 1: AIRBORNE NOISE MEASUREMENT |
| ISO/IEC 21117:2012 | Information technology — Office equipment — Copying machines and multi-function devices — Information to be included in specification sheets and related test methods |
| CEI EN 61947-1 : 2003 | ELECTRONIC PROJECTION - MEASUREMENT AND DOCUMENTATION OF KEY PERFORMANCE CRITERIA - PART 1: FIXED RESOLUTION PROJECTORS (IEC 61947-1:2002) |
| BS EN 61947-2:2002 | Electronic projection. Measurement and documentation of key performance criteria Variable resolution projectors |
| ANSI INCITS 482 : 2012 | INFORMATION TECHNOLOGY - ATA/ATAPI COMMAND SET - 2 (ACS-2) |
| ISO/IEC 17760-101:2015 | Information technology — AT Attachment — Part 101: ATA/ATAPI Command Set (ATA8-ACS) |
| BS EN ISO 9295:2015 | Acoustics. Determination of high-frequency sound power levels emitted by machinery and equipment |
| INCITS/ISO/IEC 11160-2 : 2014 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - PRINTERS - PART 2: CLASS 3 AND CLASS 4 PRINTERS |
| I.S. EN 61969-1:2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES (IEC 61969-1:2011 (EQV)) |
| ANSI INCITS 397 VOL-3 : 2005 | INFORMATION TECHNOLOGY - AT ATTACHMENT WITH PACKET INTERFACE - 7 VOLUME 3 - SERIAL TRANSPORT PROTOCOLS AND PHYSICAL INTERCONNECT (ATA/ATAPI-7 V3) |
| INCITS/ISO/IEC 15404 : 2008 | INFORMATION TECHNOLOGY - OFFICE MACHINES - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - FACSIMILE EQUIPMENT |
| I.S. EN 62310-3:2008 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
| ECMA 370 : 5ED 2015 | TED - THE ECO DECLARATION |
| ISO/IEC 17760-102:2016 | Information technology AT Attachment Part 102: ATA/ATAPI Command set - 2 (ACS-2) |
| ECMA/TR 70 : 3ED 2004 | PRODUCT-RELATED ENVIRONMENTAL DECLARATION |
| ISO 10302-2:2011 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 2: Structure-borne vibration measurements |
| I.S. EN 62075:2012 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012 (EQV)) |
| BS EN ISO 1680:2013 | Acoustics. Test code for the measurement of airborne noise emitted by rotating electrical machines |
| 12/30254781 DC : 0 | BS ISO/IEC 17760-101 - INFORMATION TECHNOLOGY - AT ATTACHMENT 8 - PART 101: ATA/ATAPI COMMAND SET (ATA8-ACS) |
| IEC 62310-3:2008 | Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements |
| IEC 62040-5-3:2016 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| ISO 1680:2013 | Acoustics — Test code for the measurement of airborne noise emitted by rotating electrical machines |
| ISO 9241-6:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 6: Guidance on the work environment |
| ISO 11064-6:2005 | Ergonomic design of control centres — Part 6: Environmental requirements for control centres |
| IEC 62075:2012 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| IEC 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| BS EN ISO 4871:2009 | Acoustics. Declaration and verification of noise emission values of machinery and equipment |
| BS EN ISO/IEC 11159:1998 | Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines |
| UNE-EN ISO 4871:2010 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| IEC 61947-1:2002 | Electronic projection - Measurement and documentation of key performance criteria - Part 1: Fixed resolution projectors |
| EN 62310-3:2008 | Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements |
| EN 29295:1991 | Acoustics - Measurement of high-frequency noise emitted by computer and business equipment (ISO 9295:1988) |
| EN ISO 11064-6:2005 | Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005) |
| EN ISO/IEC 11159 : 1998 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
| EN ISO 9241-6:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
| EN ISO 9295:2015 | Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015) |
| EN ISO 1680:2013 | Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013) |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| ANSI INCITS 452 : 2009 | INFORMATION TECHNOLOGY - AT ATTACHMENT 8 - ATA/ATAPI COMMAND SET (ATA8-ACS) |
| UNE-EN 62075:2013 | Audio/video, information and communication technology equipment - Environmentally conscious design |
| CEI EN 61969-1 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 1: DESIGN GUIDELINES |
| 13/30264708 DC : 0 | BS EN ISO 9295 - ACOUSTICS - DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY MACHINERY AND EQUIPMENT |
| BS ISO/IEC 21117:2012 | Information technology. Office equipment. Copying machines and multi-function devices. Information to be included in specification sheets and related test methods |
| DIN EN ISO 11203:2010-01 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| DIN EN ISO 9295:2015-09 | ACOUSTICS - DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY MACHINERY AND EQUIPMENT (ISO 9295:2015) |
| BS EN 61947-1:2002 | Electronic projection. Measurement and documentation of key performance criteria Fixed resolution projectors |
| BS ISO 10198:1994 | Micrographics. Rotary camera for 16 mm microfilm. Mechanical and optical characteristics |
| ECMA 108 : 6ED 2016 | DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| CEI EN 62075 : 2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN |
| I.S. EN 29295:1992 | ACOUSTICS - MEASUREMENT OF HIGH-FREQUENCY NOISE EMITTED BY COMPUTER AND BUSINESS EQUIPMENT |
| CEI EN 62310-3 : 2010 | STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS |
| ISO 10302:1996 | Acoustics Method for the measurement of airborne noise emitted by small air-moving devices |
| ISO 10302-1:2011 | Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement |
| ISO/IEC 24739-3:2010 | Information technology AT Attachment with Packet Interface - 7 Part 3: Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3) |
| BS EN ISO 11064-6:2005 | Ergonomic design of control centres Environmental requirements for control centres |
| ISO/TS 7849-2:2009 | Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor |
| ISO 9295:2015 | Acoustics Determination of high-frequency sound power levels emitted by machinery and equipment |
| EN 62075:2012/AC:2013 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 62075:2012) |
| EN 61947-2:2002 | Electronic projection - Measurement and documentation of key performance criteria - Part 2: Variable resolution projectors |
| DIN EN ISO 11064-6:2005-10 | Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005) |
| ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 389-7:2005 | Acoustics Reference zero for the calibration of audiometric equipment Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions |
| ISO/TR 25417:2007 | Acoustics Definitions of basic quantities and terms |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| ISO 9296:2017 | Acoustics — Declared noise emission values of information technology and telecommunications equipment |
| ECMA 108 : 6ED 2016 | DETERMINATION OF HIGH-FREQUENCY SOUND POWER LEVELS EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| ISO 80000-8:2007 | Quantities and units Part 8: Acoustics |
| ISO 9295:2015 | Acoustics Determination of high-frequency sound power levels emitted by machinery and equipment |
| ISO 6926:2016 | Acoustics Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 3741:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Precision methods for reverberation test rooms |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
| ECMA 109 : 7ED 2016 | DECLARED NOISE EMISSION VALUES OF INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| ECMA/TR 27 : 2ED 95 | METHOD FOR THE PREDICTION OF INSTALLATION NOISE LEVELS |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.