ISO 760:1978
Current
Current
The latest, up-to-date edition.
Determination of water Karl Fischer method (General method)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
12-01-1978
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Two methods of titration depending on whether the end point is detected visually or electrometrically are specified. The visual method is only applicable to colourless solutions but can be used when no electrometric apparatus is available. The electrometric method, whether by direct titration or back-titration, is the more accurate one and for this reason recommended. The principle of the test consists in reaction of any water present in a test portion with a solution of iodine and sulphur dioxide in a pyridine/methanol mixture (Karl Fischer reagent), previously standardized by titration with an exactly known mass of water.
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| BS 2511:1970 | Similar to |
| PN ISO 760 : 2001 | Identical |
| SS-ISO 760 : 1993 | Identical |
| NBN T 02 201 : 1979 | Identical |
| UNE 55525:1990 | Identical |
| BS 684-2.1:1976 | Similar to |
| BS 576-2:1988 | Acetic acid for industrial use Methods of test for acetic acid |
| BS 509-2:1984 | Acetone for industrial use Methods of test |
| SAE AMS 2980/4 : 2014 | CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 4 - PURCHASING SPECIFICATION - RESIN |
| BS 684-2.1:1976 | Methods of analysis of fats and fatty oils. Other methods. Determination of water by the Karl Fischer method |
| BS ISO 15512 : 1999 AMD 14837 | PLASTICS - DETERMINATION OF WATER CONTENT |
| ISO 4020:2001 | Road vehicles — Fuel filters for diesel engines — Test methods |
| BS ISO 12922 : 99 AMD 13874 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| ISO 4020-1:1979 | Road vehicles — Fuel filters for automotive compression ignition engines — Part 1: Test methods |
| BS 4993-5:1980 | Methods of test for aluminium fluoride for industrial use Determination of moisture content (Karl Fischer method) |
| DD ISO/TS 11365:2011 | Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
| BS ISO 4020:2001 | Road vehicles. Fuel filters for diesel engines.Test methods |
| 07/30144836 DC : 0 | EN ISO 15512 - PLASTICS - DETERMINATION OF WATER CONTENT |
| 12/30259884 DC : 0 | BS EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS |
| DIN EN 15692:2009-08 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
| BS ISO 14900:2017 | Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number |
| EN ISO 3452-2:2013 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| BS 3900-A24(2000) : 2000 AMD 13286 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A24: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A GAS CHROMATOGRAPHIC METHOD |
| 04/30126883 DC : DRAFT DEC 2004 | ISO 4437 - BURIED POLYETHYLENE (PE) PIPES FOR THE SUPPLY OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| SAE AMS 2950/1 : 2008 | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61221:2004 | PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
| ISO 1388-1:1981 | Ethanol for industrial use — Methods of test — Part 1: General |
| ISO 17494:2001 | Aromatic extracts, flavouring and perfuming compounds Determination of ethanol content Gas chromatographic method on packed and capillary columns |
| ISO 4317:2011 | Surface-active agents and detergents — Determination of water content — Karl Fischer methods |
| UNI EN 1555-1 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| ISO 14900:2017 | Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number |
| DIN EN ISO 4491-3:2006-06 | Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997) |
| DIN EN 12201-1:2011-11 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| UNE-EN 16245-2:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| BS EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General |
| BS EN 14998:2005 | Derivatives from coal pyrolysis. Coal tar based oils: fluxings oils. Specifications and test methods |
| BS EN ISO 3452-2:2013 | Non-destructive testing. Penetrant testing Testing of penetrant materials |
| EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| BS EN ISO 9369:1997 | Plastics. Basic materials for polyurethanes. Pure isocyanates. Analysis of isocyanate groups |
| BS EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| BS EN 13991:2003 | Derivatives from coal pyrolysis. Coal tar based oils. Creosotes. Specifications and test methods |
| EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| DIN EN 15536:2007-06 | Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods |
| DIN EN 13244-1:2003-04 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL |
| EN 13244-1:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General |
| EN 1019:2005 | Chemicals used for treatment of water intended for human consumption - Sulfur dioxide |
| DIN EN ISO 15512:2017-03 | PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016) |
| EN 12123:2012 | Chemicals used for treatment of water intended for human consumption - Ammonium sulfate |
| DIN EN 14998:2005-04 | Derivatives from coal pyrolysis - Coal tar based oils: fluxing oils - Specifications and test methods |
| DIN EN ISO 3672-2:2002-07 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 10/30227632 DC : 0 | BS ISO 4317 - SURFACE-ACTIVE AGENTS AND DETERGENTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD |
| 05/30098184 DC : DRAFT MAY 2005 | ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
| BS 5050-9(1980) : 1980 | METHODS OF TEST FOR CRYOLITE - DETERMINATION OF MOISTURE CONTENT (KARL FISHER METHOD) |
| BS EN ISO 14446:2010 | Binders for paints and varnishes. Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
| BS ISO 17322:2015 | Fertilizers and soil conditioners. Analytical methods for Sulfur Coated Urea (SCU) |
| BS ISO 8068:2006 | Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
| BS ISO 11021:1999 | Essential oils. Determination of water content. Karl Fischer method |
| ISO/TS 16332:2006 | Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency |
| 11/30239977 DC : 0 | BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| I.S. EN 13244-1:2002 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL |
| DIN EN 16245-2:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| 93/708490 DC : 0 | PREN 3840 - AEROSPACE SERIES - PAINTS AND VARNISHES TECHNICAL SPECIFICATION |
| BS ISO 2596:2006 | Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods |
| 12/30258200 DC : 0 | BS EN 12123 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
| PD CEN/TR 14548:2003 | Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| PREN ISO 15512 : DRAFT 2013 | PLASTICS - DETERMINATION OF WATER CONTENT (ISO/DIS 15512:2013) |
| PREN 12123 : DRAFT 2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
| 08/30178054 DC : DRAFT FEB 2008 | BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| BS EN 61221:2004 | Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications |
| UNE-EN ISO 15494:2016 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| ISO 8068:2006 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
| DIN EN 16028:2012-10 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| BS ISO 12492:2012 | Rubber, raw. Determination of water content by Karl Fischer method |
| 04/30098945 DC : DRAFT OCT 2004 | EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS |
| BS EN ISO 15494:2015 | Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system |
| SAE AMS 2980/1 : 2014 | CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| EN ISO 15512:2016 | Plastics - Determination of water content (ISO 15512:2016) |
| ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General |
| NF EN ISO 14446 : 2011 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
| NF ISO 10050 : 2006 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS OF TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) |
| I.S. EN ISO 15512:2016 | PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016) |
| I.S. EN 15692:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| DIN EN ISO 12922:2013-04 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| BS EN ISO 10082:2000 | Plastics. Phenolic resins. Classification and test methods |
| ISO 5381:1983 | Starch hydrolysis products Determination of water content Modified Karl Fischer method |
| UNE-EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| BS EN ISO 11890-1:2007 | Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
| BS EN 15536:2007 | Derivatives from coal pyrolysis. Coal tar based oils. Wash oils. Specifications and test methods |
| BS EN 14156:2003 | Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods |
| EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| I.S. EN ISO 3452-2:2013 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013) |
| I.S. EN 1019:2005 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SULPHUR DIOXIDE |
| I.S. EN 12201-1:2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| I.S. EN ISO 11890-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| I.S. EN 1555-1:2010-2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| ONORM EN ISO 11890-2 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| I.S. EN 12123:2012 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
| ONORM EN 12123 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| ISO 17322:2015 | Fertilizers and soil conditioners Analytical methods for Sulfur Coated Urea (SCU) |
| BS ISO 10050:2005 | Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| UNI EN 15692 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| PREN 1279-4 : DRAFT 2015 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| 06/30154367 DC : DRAFT AUG 2006 | EN 15536 - DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS, WASH OILS - SPECIFICATIONS AND TEST METHODS |
| 12/30256736 DC : 0 | BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| 03/303313 DC : DRAFT APR 2003 | EN 14639 - CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS |
| 08/30191143 DC : 0 | BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| BS ISO 3672-2 : 2000 AMD 13326 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 14446:2011-02 | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
| BS 3900-A23(2000) : 2000 AMD 13285 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD |
| 16/30323482 DC : 0 | BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
| BS ISO 4437-1:2014 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
| ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| EN 15692:2009 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
| I.S. EN 16245-2:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| ISO 11365:2017 | Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
| UNE-EN ISO 14446:2011 | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
| I.S. EN 16028:2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| ISO/TS 11365:2011 | Petroleum and related products Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
| EN 1279-2:2002 | Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
| ISO 20492-1:2008 | Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests |
| UNE-EN ISO 3452-2:2014 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| DIN EN 1555-1:2010-12 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| DIN EN 1019:2005-08 | Chemicals used for treatment of water intended for human consumption - Sulfur dioxide |
| DIN EN ISO 11890-1:2007-09 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| DIN EN 12123:2013-02 | Chemicals used for treatment of water intended for human consumption - Ammonium sulfate |
| DIN EN ISO 3452-2:2014-03 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| BS EN ISO 5381:1994 | Starch hydrolysis products. Determination of water content. Modified Karl Fischer method |
| BS EN 12201-1:2011 | Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General |
| UNI EN ISO 12922 : 2013 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| I.S. EN ISO 11890-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| UNI EN ISO 11890-2 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD |
| EN 14998:2005 | Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods |
| EN 14156:2003 | Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods |
| EN 16245-2:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| UNI EN 16028 : 2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| UNI EN 16245-2 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| UNI EN 12123 : 2013 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE |
| UNI EN 12201-1 : 2012 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| ONORM EN 16028 : 2013 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| 13/30265463 DC : 0 | BS ISO 17197 - DIMETHYL ETHER (DME) FOR FUELS - DETERMINATION OF WATER CONTENT - KARL FISCHER TITRATION METHOD |
| 13/30212494 DC : 0 | BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES |
| 10/30212144 DC : 0 | BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
| ISO 5787:1979 | Methyl chloride and ethyl chloride for industrial use — Methods of test |
| PREN ISO 15494 : DRAFT 2013 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013) |
| ISO 11021:1999 | Essential oils Determination of water content Karl Fischer method |
| UNI EN ISO 14446 : 2011 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
| BS EN 16245-2:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
| BS EN 16028:2012 | Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications |
| BS 6782-11(1999) : 1999 | BINDERS FOR PAINTS - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND THEIR CLASSIFICATION |
| BS ISO 11500:2008 | Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| 09/30207718 DC : 0 | BS ISO 7745 - HYDRAULIC FLUID POWER - FIRE-RESISTANT (FR) FLUIDS - GUIDELINES FOR USE |
| 03/300973 DC : DRAFT JAN 2003 | ISO 6488 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD |
| BS ISO 17197:2014 | Dimethyl ether (DME) for fuels. Determination of water content. Karl Fischer titration method |
| BS EN 16682:2017 | Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| 13/30266500 DC : 0 | BS EN ISO 15512 - PLASTICS - DETERMINATION OF WATER CONTENT (ISO/DIS 15512:2013) |
| BS EN ISO 15512:2016 | Plastics. Determination of water content |
| DIN ISO 4491-3:1998-07 | METALLIC POWDERS - DETERMINATION OF OXYGEN CONTENT BY REDUCTION METHODS - PART 3: HYDROGEN-REDUCIBLE OXYGEN |
| I.S. EN ISO 15494:2015 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| ISO 6191:1981 | Light olefins for industrial use Determination of traces of water Karl Fischer method |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| I.S. EN ISO 14446:2010 | BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS |
| UNE-EN ISO 15512:2017 | Plastics - Determination of water content (ISO 15512:2016) |
| I.S. CEN TR 14548:2003 | ADHESIVES - GUIDE TO TEST METHODS AND OTHER STANDARDS FOR THE GENERAL REQUIREMENTS, CHARACTERIZATION AND SAFETY OF STRUCTURAL ADHESIVES |
| ISO 15512:2016 | Plastics Determination of water content |
| DIN EN 16682:2016-01 (Draft) | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| I.S. EN 16682:2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| 15/30319712 DC : 0 | BS EN 1279-4 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| ISO 2596:2006 | Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods |
| BS EN 1279-2:2002 | Glass in building. Insulating glass units Long term test method and requirements for moisture penetration |
| DIN EN ISO 15494:2016-03 | PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015) |
| SAE AMS 2950/1 : 2008(R2019) | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
| BIS IS 16029 : 2012 | ROASTED GROUND COFFEE - DETERMINATION OF MOISTURE CONTENT - KARL FISCHER METHOD (REFERENCE METHOD) |
| ISO 10050:2005 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| I.S. EN 1279-2:2002 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION |
| BS EN ISO 10101-1:1998 | Natural gas. Determination of water by the Karl Fischer method Introduction |
| UNE-EN ISO 12922:2013 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| UNE-EN 16028:2013 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| ISO 960:1988 | Plastics — Polyamides (PA) — Determination of water content |
| BS EN 14639:2005 | Crude tar and crude benzole. Characteristics and test methods |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| BS EN 1019:2005 | Chemicals used for treatment of water intended for human consumption. Sulfur dioxide |
| BS EN ISO 3672-2:2001 | Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties |
| BS EN ISO 11890-2:2013 | Paints and varnishes. Determination of volatile organic compound (VOC) content Gas-chromatographic method |
| BS EN 14155:2003 | Derivatives from coal pyrolysis. Carbon black feedstock. Specifications and test methods |
| ISO 9369:1997 | Plastics Basic materials for polyurethanes Pure isocyanates Analysis of isocyanate groups |
| UNE-EN 1555-1:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| I.S. EN ISO 12922:2012 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| ISO 4491-3:1997 | Metallic powders — Determination of oxygen content by reduction methods — Part 3: Hydrogen-reducible oxygen |
| IEC 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| ISO 3672-2:2000 | Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 7327:1997 | Plastics. Hardeners and accelerators for epoxide resins. Determination of free acid in acid anhydride |
| ISO 7327:1994 | Plastics Hardeners and accelerators for epoxide resins Determination of free acid in acid anhydride |
| BS EN 12123:2012 | Chemicals used for treatment of water intended for human consumption. Ammonium sulfate |
| UNE-EN 12123:2013 | Chemicals used for treatment of water intended for human consumption - Ammonium sulfate |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| BS EN ISO 4491-3:2006 | Metallic powders. Determination of oxygen content by reduction methods Hydrogen-reducible oxygen |
| ISO 14446:1999 | Binders for paints and varnishes — Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
| EN ISO 7327:1997 | Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994) |
| EN 16028:2012 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| EN 16682:2017 | Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| EN ISO 3672-2:2001 | Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000) |
| EN ISO 4491-3:2006 | Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997) |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 960 : 1997 | PLASTICS - POLYAMIDES (PA) - DETERMINATION OF WATER CONTENT |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| EN ISO 5381:1994 | Starch hydrolysis products - Determination of water content - Modified Karl Fischer method (ISO 5381:1983) |
| EN 14155:2003 | Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods |
| EN 14639:2005 | Crude tar and crude benzole - Characteristics and test methods |
| EN 13991:2003 | Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods |
| EN ISO 9369 : 1997 | PLASTICS - BASIC MATERIALS FOR POLYURETHANES - PURE ISOCYANATES - ANALYSIS OF ISOCYANATE GROUPS |
| EN ISO 14446:2010 | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
| EN 15536:2007 | Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods |
| BS ISO 7745:2010 | Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use |
| BS ISO 18237:2017 | Hydraulic fluid power. Method for evaluating water separation performance of dehydrators |
| BS 2782-4.433E(1996) : AMD 9699 | METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF FREE ACID IN ACID ANHYDRIDE FOR HARDENERS AND ACCELERATORS IN EPOXIDE RESINS |
| BS ISO 11365:2017 | Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
| I.S. EN ISO 9369:1997 | PLASTICS - BASIC MATERIALS FOR POLYURETHANES - PURE ISOCYANATES - ANALYSIS OF ISOCYANATE GROUPS |
| NF ISO 28641 : 2010 | RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS |
| DIN EN 3840:2007-10 | Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007 |
| 13/30253060 DC : 0 | BS ISO 17322 - FERTILIZERS AND SOIL CONDITIONERS - SULFUR COATED UREA (SCU) - ANALYTICAL METHODS |
| 16/30268528 DC : 0 | BS ISO 18237 - HYDRAULIC FLUID POWER - METHOD FOR EVALUATING WATER SEPARATION PERFORMANCE OF DEHYDRATORS |
| 07/30164620 DC : 0 | BS EN 15692 - ETHANOL AS A BLENDING COMPONENT FOR GASOLINE - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| BS ISO 28641:2010 | Rubber compounding ingredients. Organic chemicals. General test methods |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| BS EN 15692:2009 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method |
| 05/30046519 DC : 0 | ISO 2596 - IRON ORES - DETERMINATION OF HYGROSCOPIC MOISTURE IN ANALYTICAL SAMPLES - GRAVIMETRIC, KARL FISCHER AND MASS-LOSS METHODS |
| NF EN 16682 : 2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| NF ISO 8068 : 2006 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
| EN ISO 15494:2015 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
| ISO 11817:1994 | Roasted ground coffee Determination of moisture content Karl Fischer method (Reference method) |
| ISO 12492:2012 | Rubber, raw — Determination of water content by Karl Fischer method |
| NF EN 1279-2 : 2003 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION |
| DIN EN ISO 15512:2016-06 (Draft) | PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016) |
| BS 2000-572(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| ISO 10933:1997 | Polyethylene (PE) valves for gas distribution systems |
| ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| UNE-EN 12201-1:2012 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| ISO 3452-2:2013 | Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
| BS EN ISO 960:1998 | Plastics. Polyamides (PA). Determination of water content |
| ONORM EN 1555-1 : 2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| CEN/TR 14548:2003 | Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| DIN EN 14156:2003-11 | DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: COAL TAR FUEL - SPECIFICATIONS AND TEST METHODS |
| DIN EN 14155:2003-11 | DERIVATIVES FROM COAL PYROLYSIS - CARBON BLACK FEEDSTOCK - SPECIFICATIONS AND TEST METHODS |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| DIN EN 14639:2005-11 | Crude tar and crude benzole - Characteristics and test methods; German version EN 14639:2005 |
| UNI EN ISO 3452-2 : 2014 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS |
| EN 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| ONORM EN ISO 11890-1 : 2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| UNE-EN ISO 15494:2019 | Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.