ISO 6929:2013
Current
Current
The latest, up-to-date edition.
Steel products — Vocabulary
Available format(s)
Hardcopy , PDF
Language(s)
English, Russian
Published date
11-04-2013
US$230.00
Excluding Tax where applicable
ISO 6929:2013 defines terms for steel products according to their
a) stage of manufacture,
b) shape and dimensions, and
c) appearance.
| Committee |
ISO/TC 17
|
| DevelopmentNote |
Supersedes ISO/DIS 6929. (11/2013)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SAC GB/T 15574 : 1995 | Identical |
| BS EN 10079:2007 | Corresponds |
| 02/704957 DC : DRAFT NOV 2002 | ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| ISO/TR 15510:1997 | Stainless steels — Chemical composition |
| 15/30287641 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 9445-1:2010-06 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009) |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 17/30337413 DC : 0 | BS EN ISO 4957 - TOOL STEELS |
| API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
| 09/30196508 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| NF EN ISO 9445-1 : 2010 | CONTINUOUSLY COLD-ROLLED STAINLESS STEEL - TOLERANCES ON DIMENSIONS AND FORM - PART 1: NARROW STRIP AND CUT LENGTHS |
| 13/30247437 DC : 0 | BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| 13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
| 12/30272892 DC : 0 | BS ISO 15510 - STAINLESS STEELS - CHEMICAL COMPOSITION |
| 11/30191086 DC : 0 | BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| 15/30316161 DC : 0 | BS ISO 6931-1 - STAINLESS STEELS FOR SPRINGS - PART 1: WIRE |
| 17/30350817 DC : 0 | BS EN ISO 377 - STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING |
| 13/30256266 DC : 0 | BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
| 02/713148 DC : DRAFT NOV 2002 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 04/30069217 DC : DRAFT FEB 2004 | ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 06/30159843 DC : 0 | BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| ISO 10799-1:2011 | Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| ISO 4951-1:2001 | High yield strength steel bars and sections — Part 1: General delivery requirements |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| ISO 16124:2015 | Steel wire rod — Dimensions and tolerances |
| I.S. EN ISO 4957:2000 | TOOL STEELS |
| ISO 9328-1:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| NF EN ISO 9445-2 : 2010 | CONTINUOUSLY COLD-ROLLED STAINLESS STEEL - TOLERANCES ON DIMENSIONS AND FORM - PART 2: WIDE STRIP AND PLATE/SHEET |
| BS EN ISO 377:2017 | Steel and steel products. Location and preparation of samples and test pieces for mechanical testing |
| BS EN ISO 9445:2006 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form |
| EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| EN 10079:2007 | Definition of steel products |
| EN ISO 9445:2006 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002) |
| I.S. EN ISO 9444-2:2010 | CONTINUOUSLY HOT-ROLLED STAINLESS STEEL - TOLERANCES ON DIMENSIONS AND FORM - PART 2: WIDE STRIP AND SHEET/PLATE |
| 11/30191093 DC : 0 | BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| 08/30166437 DC : DRAFT JAN 2008 | BS ISO 15510 - STAINLESS STEELS - CHEMICAL COMPOSITION |
| BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 11/30230618 DC : 0 | BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
| 01/705644 DC : DRAFT MAR 2001 | ISO/DIS 9444 - CONTINUOUSLY HOT-ROLLED STAINLESS STEEL STRIP, PLATE/SHEET AND CUT LENGTHS - TOLERANCES ON DIMENSIONS AND FORM |
| BS EN ISO 9444-2:2010 | Continuously hot-rolled stainless steel. Tolerances on dimensions and form Wide strip and sheet/plate |
| 13/30252100 DC : 0 | BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| 09/30169302 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| BS EN ISO 9445-2:2010 | Continuously cold-rolled stainless steel. Tolerances on dimensions and form Wide strip and plate/sheet |
| 05/30114969 DC : DRAFT SEP 2005 | EN 10079 - DEFINITION OF STEEL PRODUCTS |
| 04/300984 DC : DRAFT JAN 2004 | BS ISO 4955 - HEAT-RESISTING STEELS |
| 08/30171579 DC : DRAFT SEP 2008 | BS ISO 9444-1 - CONTINUOUSLY HOT-ROLLED STAINLESS STEEL - TOLERANCES ON DIMENSIONS AND FORM - PART 1: NARROW STRIP AND CUT LENGTHS |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| DD ISO/TS 15510:2003 | Stainless steels. Chemical composition |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO/TS 15510:2003 | Stainless steels — Chemical composition |
| ISO 6931-2:2005 | Stainless steels for springs — Part 2: Narrow strip |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering· |
| I.S. EN ISO 16120-3:2011 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE, LOW-CARBON STEEL WIRE ROD |
| PREN ISO 683-17 : DRAFT 2013 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013) |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 15510:2014 | Stainless steels — Chemical composition |
| ISO 9444-1:2009 | Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths |
| ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete — Vocabulary |
| I.S. EN ISO 377:2017 | STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING (ISO 377:2017) |
| I.S. EN ISO 683-17:2014 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| I.S. EN 10079:2007 | DEFINITION OF STEEL PRODUCTS |
| 05/30092093 DC : DRAFT JUL 2005 | ISO 24314 - STRUCTURAL STEELS - STEELS FOR SEISMIC IMPROVED RESISTANCE FOR BUILDING |
| 15/30296029 DC : 0 | BS ISO 4955 - HEAT-RESISTANT STEELS |
| 01/705645 DC : DRAFT MAR 2001 | ISO/DIS 9445 - CONTINUOUSLY COLD-ROLLED STAINLESS STEEL NARROW STRIP, WIDE STRIP, PLATE/SHEET AND CUT LENGTHS - TOLERANCES ON DIMENSIONS AND FORM |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| BS ISO 16143-3:2014 | Stainless steels for general purposes Wire |
| 12/30250152 DC : 0 | BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| 14/30295082 DC : 0 | BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS |
| 12/30243622 DC : DRAFT APR 2012 | BS EN ISO 377 - STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| BS ISO 4990:2015 | Steel castings. General technical delivery requirements |
| 17/30347225 DC : 0 | BS EN ISO 9443 - SURFACE QUALITY CLASSES FOR HOT-ROLLED ROUND BARS AND WIRE ROD |
| DIN EN ISO 16120-1:2017-09 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 11/30227247 DC : 0 | BS ISO 7452 - HOT-ROLLED STEEL PLATES - TOLERANCES ON DIMENSIONS AND SHAPE |
| 11/30230615 DC : 0 | BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| BS EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire General requirements |
| DIN EN ISO 9444-2:2010-11 | Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009) |
| ISO/TS 4949:2016 | Steel names based on letter symbols |
| NF EN ISO 16120-3 : 2011 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE, LOW CARBON STEEL WIRE ROD |
| ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
| ISO 9444:2002 | Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths — Tolerances on dimensions and form |
| NF EN ISO 4957 : 2000 | TOOL STEELS |
| ISO 3183:2012 | Petroleum and natural gas industries — Steel pipe for pipeline transportation systems |
| IEC 60404-8-10:2009 | Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays |
| ISO 3183-1:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) — General requirements |
| ISO 7452:2013 | Hot-rolled steel plates — Tolerances on dimensions and shape |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| ISO 6931-1:2016 | Stainless steels for springs — Part 1: Wire |
| DIN EN ISO 683-17:2015-02 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| I.S. EN ISO 13680:2020 | Petroleum and natural gas industries – Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020) |
| ONORM EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN ISO 13680:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| ISO 6930-2:2004 | High yield strength steel plates and wide flats for cold forming — Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels |
| BS EN ISO 16120-3:2011 | Non-alloy steel wire rod for conversion to wire Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| ISO 22034-2:2016 | Steel wire and wire products — Part 2: Tolerances on wire dimensions |
| I.S. EN ISO 9445:2006 | CONTINUOUSLY COLD-ROLLED STAINLESS STEEL NARROW STRIP, WIDE STRIP, PLATE/SHEET AND CUT LENGTHS - TOLERANCES ON DIMENSIONS AND FORM |
| 15/30278130 DC : 0 | BS ISO 22034-2 - STEEL WIRE AND WIRE PRODUCTS - PART 2: TOLERANCES ON WIRE DIMENSIONS |
| ISO 20723:2004 | Structural steels — Surface condition of hot-rolled sections — Delivery requirements |
| BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
| 13/30252142 DC : 0 | BS ISO 16124 - STEEL WIRE ROD - DIMENSIONS AND TOLERANCES |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| 04/301144 DC : DRAFT JAN 2004 | ISO 6931-2 - STAINLESS STEELS FOR SPRINGS - PART 2: NARROW STRIP |
| BS ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete. Vocabulary |
| 11/30230612 DC : 0 | BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS |
| BS ISO 15510:2014 | Stainless steels. Chemical composition |
| BS ISO 16124:2015 | Steel wire rod. Dimensions and tolerances |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| 03/115881 DC : DRAFT OCT 2003 | ISO 20723 - STRUCTURAL STEELS - SURFACE CONDITION OF HOT-ROLLED SECTIONS - DELIVERY REQUIREMENTS |
| ISO 683-9:1988 | Heat-treatable steels, alloy steels and free-cutting steels — Part 9: Wrought free-cutting steels |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| I.S. EN ISO 9445-2:2010 | CONTINUOUSLY COLD-ROLLED STAINLESS STEEL - TOLERANCES ON DIMENSIONS AND FORM - PART 2: WIDE STRIP AND PLATE/SHEET |
| BIS IS 8910 : 2010 | GENERAL TECHNICAL DELIVERY REQUIREMENTS FOR STEEL AND STEEL PRODUCTS |
| ISO 16143-1:2014 | Stainless steels for general purposes — Part 1: Corrosion-resistant flat products |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| ISO 4990:2015 | Steel castings — General technical delivery requirements |
| ISO 4955:2016 | Heat-resistant steels |
| ISO 683-11:2012 | Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Case-hardening steels |
| ISO 4957:1999 | Tool steels |
| ONORM EN ISO 3183 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| ISO 13680:2010 | Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions |
| ISO 9445-2:2009 | Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and plate/sheet |
| ISO 9444-2:2009 | Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and sheet/plate |
| BS EN 10079:2007 | Definition of steel products |
| ISO 16120-3:2011 | Non-alloy steel wire rod for conversion to wire — Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod |
| ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire — Part 1: General requirements |
| BS EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels Ball and roller bearing steels |
| ISO 9445:2002 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths — Tolerances on dimensions and form |
| ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels |
| DIN EN ISO 377:2017-09 | STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING (ISO 377:2017) |
| EN ISO 683-17:2014 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| EN ISO 9445-1:2010 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009) |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 9445-2:2010 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009) |
| EN ISO 9444-2:2010 | Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009) |
| I.S. EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| DIN EN ISO 9445-2:2010-06 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009) |
| 12/30244863 DC : 0 | BS ISO 404 - STEEL AND STEEL PRODUCTS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| 14/30284697 DC : 0 | BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
| ISO/TR 11637:1997 | Boron treated engineering steels for quenching and tempering |
| 17/30346747 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| ISO 9443:1991 | Heat-treatable and alloy steels — Surface quality classes for hot-rolled round bars and wire rods — Technical delivery conditions |
| ISO 683-4:2016 | Heat-treatable steels, alloy steels and free-cutting steels — Part 4: Free-cutting steels |
| ISO 683-14:2004 | Heat-treatable steels, alloy steels and free-cutting steels — Part 14: Hot-rolled steels for quenched and tempered springs |
| BS EN ISO 9445-1:2010 | Continuously cold-rolled stainless steel. Tolerances on dimensions and form Narrow strip and cut lengths |
| 08/30171581 DC : DRAFT SEP 2008 | BS ISO 9444-2 - CONTINUOUSLY HOT-ROLLED STAINLESS STEEL - TOLERANCES ON DIMENSIONS AND FORM - PART 2: WIDE STRIP AND SHEET/PLATE |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 03/314809 DC : DRAFT SEP 2003 | EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
| I.S. EN ISO 9445-1:2010 | CONTINUOUSLY COLD-ROLLED STAINLESS STEEL - TOLERANCES ON DIMENSIONS AND FORM - PART 1: NARROW STRIP AND CUT LENGTHS |
| ISO 12633-1:2011 | Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| ISO 16143-3:2014 | Stainless steels for general purposes — Part 3: Wire |
| ISO 630-1:2011 | Structural steels — Part 1: General technical delivery conditions for hot-rolled products |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| ISO 683-10:1987 | Heat-treatable steels, alloy steels and free-cutting steels — Part 10: Wrought nitriding steels |
| ISO 9445-1:2009 | Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths |
| BS EN ISO 4957:2000 | Tool steels |
| DIN EN ISO 377:2015-12 | STEEL AND STEEL PRODUCTS - LOCATION AND PREPARATION OF SAMPLES AND TEST PIECES FOR MECHANICAL TESTING (ISO 377:2017) |
| DIN EN ISO 9445:2006-05 | CONTINUOUSLY COLD-ROLLED STAINLESS STEEL NARROW STRIP, WIDE STRIP, PLATE/SHEET AND CUT LENGTHS - TOLERANCES ON DIMENSIONS AND FORM |
| EN ISO 16120-3:2011 | Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) |
| DIN EN 10079:2007-06 | Definition of steel products |
| DIN EN ISO 16120-3:2011-10 | Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) |
| UNE-EN ISO 16120-3:2012 | Non-alloy steel wire rod for conversion to wire - Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod (ISO 16120-3:2011) |
| UNE-EN ISO 9445-1:2011 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009) |
| UNE-EN ISO 9445-2:2011 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009) |
| UNE-EN ISO 9444-2:2011 | Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009) |
| UNE-EN ISO 683-17:2015 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
| UNE-EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| UNE-EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| ONORM EN ISO 683-17 : 2015 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014) |
| EN 10079:2007 | Definition of steel products |
| ISO 4948-1:1982 | Steels — Classification — Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 4948-2:1981 | Steels — Classification — Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| ISO 10241-1:2011 | Terminological entries in standards — Part 1: General requirements and examples of presentation |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.