ISO 6892-1:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Metallic materials Tensile testing Part 1: Method of test at room temperature
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
11-15-2019
Superseded by
Language(s)
French, English
Published date
06-27-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 6892-1:2016 specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at room temperature.
NOTE Annex A contains further recommendations for computer controlled testing machines.
| DevelopmentNote |
Supersedes ISO 6892. (08/2009) Supersedes ISO/DIS 6892-1. (06/2016)
|
| DocumentType |
Standard
|
| Pages |
78
|
| ProductNote |
THIS STANDARD ALSO REFERS TO NIS 80 : 1994, NIS 3003 : 1995, CWA 15261-2 : 2005
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 6892-1 : 2017 | Identical |
| PN-EN ISO 6892-1:2016-09 | Identical |
| EN ISO 6892-1:2016 | Identical |
| UNI EN ISO 6892-1:2016 | Identical |
| IS 1608 : Part 1 : 2018 | Identical |
| NS EN ISO 6892-1 : 2016 | Identical |
| BS EN ISO 6892-1:2016 | Identical |
| NBN EN ISO 6892-1 : 2009 | Identical |
| SS-EN ISO 6892-1:2016 | Identical |
| NEN EN ISO 6892-1 : 2016 | Identical |
| I.S. EN ISO 6892-1:2016 | Identical |
| UNE-EN ISO 6892-1:2017 | Identical |
| NF EN ISO 6892-1 : 2016 | Identical |
| SN EN ISO 6892-1 : 2016 | Identical |
| DIN EN ISO 6892-1:2017-02 | Identical |
| UNI EN ISO 6892-1 : 2009 | Identical |
| ABNT NBR ISO 6892-1:2013 Corrigida 2:2018 | Identical |
| NBR ISO 6892-1 : 2013 ERRATA 1 2015 | Identical |
| I.S. EN ISO 15630-3:2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| BS ISO 2408:2017 | Steel wire ropes. Requirements |
| 11/30239491 DC : 0 | BS EN 10149-1 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| BS EN 61788-6:2011 | Superconductivity Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| UNE-EN 14811:2007 | Railway applications - Track - Special purpose rail - Grooved and associated construction |
| DIN EN ISO 15156-3:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| CEI EN 62047-9 : 2012 | SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 9: WAFER TO WAFER BONDING STRENGTH MEASUREMENT FOR MEMS |
| BS ISO 9364:2017 | Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
| BS ISO 8535-1:2016 | Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes |
| DIN EN ISO 21672-1:2012-07 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| I.S. EN ISO 11118:2015&LC:2015-12 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
| 17/30352962 DC : 0 | BS EN ISO 15630-1 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
| 15/30316712 DC : 0 | BS ISO 27306 - METALLIC MATERIALS - METHOD OF CONSTRAINT LOSS CORRECTION OF CTOD FRACTURE TOUGHNESS FOR FRACTURE ASSESSMENT OF STEEL COMPONENTS |
| DIN EN 10152:2009-07 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
| 17/30355209 DC : 0 | BS EN ISO 18592 - RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS |
| 13/30216084 DC : 0 | BS ISO 7441 - CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN OUTDOOR EXPOSURE CORROSION TESTS |
| ONORM EN ISO 26203-1 : 2010 | METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS |
| BS ISO 5832-1:2007 | Implants for surgery. Metallic materials Wrought stainless steel |
| DIN EN 10338:2015-10 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| 16/30258478 DC : 0 | BS EN 13674-2 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| ISO 7500-1:2018 | Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| 14/30248087 DC : 0 | BS ISO 11950 - COLD-REDUCED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
| BS EN 10294-2:2012 | Hollow bars for machining. Technical delivery conditions Stainless steels with specified machinability properties |
| 15/30287641 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| 12/30258618 DC : 0 | BS ISO 5951 - HOT-ROLLED STEEL SHEET OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY |
| BS ISO 4991:2015 | Steel castings for pressure purposes |
| API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
| DIN EN ISO 26203-1:2010-06 | METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS |
| ISO 11949:2016 | Cold-reduced tinmill products Electrolytic tinplate |
| ASTM F 1295 : 2016 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
| 17/30357660 DC : DRAFT AUG 2017 | BS ISO 4960 - STEEL STRIP, COLD-REDUCED WITH A MASS FRACTION OF CARBON OVER 0,25% |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| PREN 12493 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| 15/30312510 DC : 0 | BS ISO 13976 - HOT-ROLLED STEEL SHEET IN COILS OF STRUCTURAL QUALITY AND HEAVY THICKNESS |
| DIN EN ISO 11118:2016-03 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| 17/30312468 DC : 0 | BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
| PREN 1442 : DRAFT 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| 13/30263803 DC : 0 | BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
| CSA B625 : 2013 | PORTABLE TANKS FOR THE TRANSPORT OF DANGEROUS GOODS |
| 17/30363845 DC : 0 | BS ISO 21927-3 - SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
| PREN 10207 : DRAFT 2015 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| EN ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010) |
| PREN 598 : DRAFT 2017 | COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
| 16/30338590 DC : 0 | BS EN 10164 - STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 12449:2015-11 (Draft) | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| 12/30258891 DC : 0 | BS ISO 5002 - HOT-ROLLED AND COLD-REDUCED ELECTROLYTIC ZINC-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
| UNI EN 13749 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHODS OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIES FRAMES |
| BS EN ISO 21672-1:2012 | Dentistry. Periodontal probes General requirements |
| 12/30257641 DC : 0 | BS ISO 7778 - THROUGH-THICKNESS CHARACTERISTICS FOR STEEL PRODUCTS |
| 13/30280536 DC : 0 | BS ISO 4998 - CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF STRUCTURAL QUALITY |
| UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| 15/30310217 DC : 0 | BS ISO 5832-1 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 1: WROUGHT STAINLESS STEEL |
| ONORM EN ISO 15630-2 : 2011 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
| 16/30332611 DC : DRAFT JAN 2016 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| 11/30239473 DC : 0 | BS EN 10025-1 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10149-1:2013-12 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
| NF EN ISO 26203-1 : 2010 | METALLIC MATERIALS - TENSILE TESTING METHOD AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS |
| BS ISO 15177:2012 | Hot-rolled twin-roll cast carbon steel sheet of commercial quality |
| BS ISO 20032:2013 | Method for evaluation of tensile properties of metallic superplastic materials |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| CEI EN 50149 : 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES |
| 15/30325000 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| UNI EN 13600 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| 14/30301152 DC : 0 | BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| BS EN 15566:2016 | Railway applications. Railway rolling stock. Draw gear and screw coupling |
| 11/30251682 DC : 0 | BS EN 1977 - COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| BS ISO 14737:2015 | Carbon and low alloy cast steels for general applications |
| 12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
| BS EN 16124:2011 | Founding. Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
| UNI EN ISO 15630-3 : 2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| 17/30357663 DC : 0 | BS ISO 5000 - STEEL SHEET, ALUMINIUM-SILICON ALLOY-COATED BY THE CONTINUOUS HOT-DIP PROCESS, OF COMMERCIAL AND DRAWING QUALITIES |
| 12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| 11/30191086 DC : 0 | BS ISO 12633-1 - HOT-FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| 10/30201497 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| PREN 14811 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GRVED AND ASSOCIATED CONSTRUCTION |
| I.S. EN ISO 898-2:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| 15/30316161 DC : 0 | BS ISO 6931-1 - STAINLESS STEELS FOR SPRINGS - PART 1: WIRE |
| BS EN ISO 7866:2012 | Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing |
| PREN 12392 : DRAFT 2014 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| BS EN 1562:2012 | Founding. Malleable cast irons |
| PD CEN/TS 17010:2016 | Nanotechnologies. Guidance on measurands for characterising nano-objects and materials that contain them |
| 14/30287983 DC : 0 | BS ISO 4997 - COLD-REDUCED CARBON STEEL SHEET OF STRUCTURAL QUALITY |
| 12/30251283 DC : 0 | BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
| I.S. EN ISO 5832-3:2016 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY (ISO 5832-3:2016) |
| 13/30256266 DC : 0 | BS ISO 683-18 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 18: BRIGHT STEEL PRODUCTS |
| BS ISO 5832-7:2016 | Implants for surgery. Metallic materials Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
| UNE-EN ISO/ASTM 52921:2017 | Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013) |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| UNI EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| PREN 2576 : 200P2 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| I.S. EN 15827:2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| UNI EN 4800-006 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| API 6A CHINESE : 2011 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| UNI EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| CEI EN 50288-1 : 2014 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| DIN EN ISO 12004-2:2009-02 | Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008) |
| UNE-EN ISO 5755:2013 | Sintered metal materials - Specifications (ISO 5755:2012) |
| API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
| I.S. EN 14638-3:2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| PREN ISO 15614-13 : DRAFT 2010 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
| PREN 14140 : DRAFT 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| ISO 8168:2016 | Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Procurement specification |
| PREN 10120 : DRAFT 2014 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| BS EN 14353 : 2007 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 21672-1:2012 | DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS (ISO 21672-1:2012) |
| I.S. EN 1563:2011 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| API 5C6 : 2006 : R2012 | PIPE WITH WELDED CONNECTORS |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
| I.S. EN ISO 9809-2:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| PREN 1977 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| PREN 10028-1 : DRAFT 2014 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| ISO 11951:2016 | Cold-reduced tinmill products Blackplate |
| I.S. EN ISO 17078-4:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| ISO 606:2015 | Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
| BS EN ISO 18592:2009 | Resistance welding. Destructive testing of welds. Method for the fatigue testing of multispot- welded specimens |
| ASTM F 1058 : 2016 : REDLINE | Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008) |
| I.S. EN 12493:2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| ISO 9725:2017 | Nickel and nickel alloy forgings |
| 17/30359541 DC : 0 | BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| DIN EN ISO 15630-2:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
| 15/30322070 DC : 0 | BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| ISO 13583-1:2015 | Centrifugally cast steel and alloy products — Part 1: General testing and tolerances |
| UNE-EN 15048-2:2017 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| PD CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications Design method |
| I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| NF EN ISO 15630-3 : 2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEELS |
| 16/30332605 DC : 0 | BS EN 10210-1 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| ISO 16220:2017 | Magnesium and magnesium alloys — Magnesium alloy ingots and castings |
| 17/30244737 DC : 0 | BS EN 17149 - RAILWAY APPLICATIONS - FATIGUE STRENGTH ASSESSMENT OF RAILWAY VEHICLE STRUCTURES BASED ON CUMULATIVE DAMAGE |
| UNI EN ISO 15630-1 : 2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
| EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
| I.S. EN 10216-2:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| EN 12167:2016 | Copper and copper alloys - Profiles and bars for general purposes |
| EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| DIN EN 13605:2013-09 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| DIN EN 13599:2014-12 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| DIN EN ISO 15156-2:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| DIN EN 12732:2014-07 | Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014) |
| DIN EN 1982:2016-01 (Draft) | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| DIN EN 1396:2015-06 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| DIN EN ISO 11120:2015-05 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
| DIN EN 13602:2013-09 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| DIN EN 13604:2013-09 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| BS EN 13600:2013 | Copper and copper alloys. Seamless copper tubes for electrical purposes |
| UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| UNE-EN ISO 17641-2:2016 | Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2015) |
| BS EN 12101-3:2015 | Smoke and heat control systems Specification for powered smoke and heat control ventilators (Fans) |
| BS EN 13835:2012 | Founding. Austenitic cast irons |
| BS EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| BS EN ISO 9018:2015 | Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints |
| UNE-EN 10272:2016 | Stainless steel bars for pressure purposes |
| UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| BS EN ISO 22674:2016 | Dentistry. Metallic materials for fixed and removable restorations and appliances |
| BS EN 754-1:2016 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Technical conditions for inspection and delivery |
| BS EN 13348:2016 | Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum |
| BS EN 10305-2:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes |
| BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
| DIN EN 14893:2014-09 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| BS EN 10205:2016 | Cold reduced tinmill products. Blackplate |
| I.S. EN 14276-1:2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| BS EN 10272:2007 | Stainless steel bars for pressure purposes |
| UNE-EN 10314:2016 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| DIN EN 10305-1:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| BS EN ISO 17641-2:2015 | Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes Self-restraint tests |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| BS EN 755-2:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Mechanical properties |
| I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| DIN EN 1562:2012-05 | FOUNDING - MALLEABLE CAST IRONS |
| I.S. EN 10305-2:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| I.S. EN 13148:2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| I.S. EN 10216-4:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| I.S. EN 10120:2017 | STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| I.S. EN 10222-1:2017 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS |
| DIN EN 14195:2015-03 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| EN 13230-3:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
| EN 62561-2:2012 | Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes |
| EN 12101-3:2015 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
| EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 10314:2016 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| CEN/TS 15718:2011 | Railway applications - Wheelsets and bogies - Product requirements for cast wheels |
| EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| EN 12952-5:2011 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| EN 12166:2016 | Copper and copper alloys - Wire for general purposes |
| EN 10270-1:2011+A1:2017 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
| EN 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| EN 10268:2006+A1:2013 | Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 10270-2:2011 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
| EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| CEN/TS 17010:2016 | Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| DIN EN 10205:2017-03 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| UNI EN 12732 : 2014 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| EN 10205:2016 | Cold reduced tinmill products - Blackplate |
| EN 10207:2017 | Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars |
| ONORM EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| EN 12451:2012 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
| EN 50149:2012 | Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| DIN EN 15551:2011-01 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| ONORM EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| ONORM EN ISO 5755 : 2013 | SINTERED METAL MATERIALS - SPECIFICATIONS (ISO 5755:2012) |
| ONORM EN 15001-1 : 2011 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| ONORM EN 10209 : 2013 | COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| ONORM EN 1396 : 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| ISO 11950:2016 | Cold-reduced tinmill products Electrolytic chromium/chromium oxide-coated steel |
| ISO 17440:2014 | Cranes General design Limit states and proof of competence of forged steel hooks |
| EN 13600:2013 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| ISO 6363-2:2012 | Wrought aluminium and aluminium alloys — Cold-drawn rods/bars and tubes and wires — Part 2: Mechanical properties |
| DIN EN ISO 26203-2:2012-01 | Metallic materials - Tensile testing at high strain rates - Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011) |
| UNI EN 16482 : 2014 | FOUNDING - CONTINUOUS CAST IRON BARS |
| BS ISO 15208:2012 | Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality |
| DIN EN ISO 5832-3:2015-06 (Draft) | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY (ISO 5832-3:2016) |
| S.R. CEN/TS 17010:2016 | NANOTECHNOLOGIES - GUIDANCE ON MEASURANDS FOR CHARACTERISING NANO-OBJECTS AND MATERIALS THAT CONTAIN THEM |
| 11/30191093 DC : 0 | BS ISO 10799-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
| BS EN 61788-19:2014 | Superconductivity Mechanical properties measurement. Room temperature tensile test of reacted Nb<sub>3</sub>Sn composite superconductors |
| BS ISO 25217:2009 | Adhesives. Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens |
| 14/30291911 DC : 0 | BS ISO 6362-2 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED RODS/BARS, TUBES AND PROFILES - PART 2: MECHANICAL PROPERTIES |
| PREN 10303 : DRAFT 2013 | THIN MAGNETIC STEEL SHEET AND STRIP FOR USE AT MEDIUM FREQUENCIES |
| DIN EN ISO 6892-2:2011-05 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| BS EN ISO 9809-1:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
| BS ISO 6892-4:2015 | Metallic materials. Tensile testing Method of test in liquid helium |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| 11/30230618 DC : 0 | BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| 13/30266550 DC : 0 | BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| BS EN 50525-2-11:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750V (U0/U) Cables for general applications. Flexible cables with thermoplastic PVC insulation |
| DIN EN ISO 22068 E : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| PD CEN/TR 16748:2014 | Aluminium and aluminium alloys. Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting |
| UNI EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| 13/30280395 DC : 0 | BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| BS ISO 14788:2017 | Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
| BS ISO 4999:2014 | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
| BS EN ISO 26203-2:2011 | Metallic materials. Tensile testing at high strain rates Servo-hydraulic and other test systems |
| DIN EN 16451:2015-09 | Railway applications - Braking - Brake pad holder |
| API 9A : 2011 : INC : ERR 1 : 2012 : R2016 | SPECIFICATION FOR WIRE ROPE |
| 14/30300966 DC : 0 | BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DIN EN ISO 9693-1:2012-06 | DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS (ISO 9693-1:2012) |
| 12/30270633 DC : 0 | BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 13/30252100 DC : 0 | BS ISO 4990 - STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS |
| 12/30258888 DC : 0 | BS ISO 3573 - HOT-ROLLED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
| BS ISO 22068 : 2012 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| 17/30334106 DC : 0 | BS ISO 13887 - STEEL SHEET, COLD-REDUCED, OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY |
| 17/30339115 DC : 0 | ISO/DIS 4978 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| 11/30239494 DC : 0 | BS EN 10149-2 - HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| ISO 5832-2:2018 | Implants for surgery — Metallic materials — Part 2: Unalloyed titanium |
| ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| 09/30209028 DC : 0 | BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| 17/30342659 DC : 0 | BS ISO 21635 - SHIPS AND MARINE TECHNOLOGY - SPECIFICATION OF HIGH MANGANESE AUSTENITIC STEEL USED FOR LNG TANKS ON BOARD SHIPS |
| DIN EN ISO 4136:2013-02 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| DIN EN 16482:2014-09 | Founding - Continuous cast iron bars |
| 17/30334103 DC : 0 | BS ISO 9364 - CONTINUOUS HOT-DIP 55% ALUMINIUM/ZINC ALLOY-COATED STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
| 11/30253751 DC : 0 | BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| BS ISO 5838-1:2013 | Implants for surgery. Metallic skeletal pins and wires General requirements |
| 15/30248084 DC : 0 | BS ISO 11949 - COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE |
| PREN 10219-1 : DRAFT 2016 | COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| DIN EN 15551:2013-05 (Draft) | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| PREN 755-2 : DRAFT 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
| UNI EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| NF EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| BS EN 14811 : 2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| 12/30255914 DC : 0 | BS ISO 5950 - ELECTROLYTIC TIN-COATED COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
| ONORM EN 15512 : 2010 | STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| 17/30368523 DC : 0 | BS ISO 13782 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - UNALLOYED TANTALUM FOR SURGICAL IMPLANT APPLICATIONS |
| UNI EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| S.R. CEN/TS 15718:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| 15/30331537 DC : 0 | BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| BS EN 16019:2014 | Railway applications. Automatic coupler. Performance requirements, specific interface geometry and test method |
| 17/30337809 DC : DRAFT JAN 2017 | BS EN 15512 - STEEL STATIC STORAGE SYSTEMS - ADJUSTABLE PALLET RACKING SYSTEMS - PRINCIPLES FOR STRUCTURAL DESIGN |
| 10/30207746 DC : 0 | BS ISO 20805 - HOT-ROLLED STEEL SHEET IN COILS OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY AND HEAVY THICKNESS FOR COLD FORMING |
| 11/30251991 DC : 0 | BS EN 14195 - METAL FRAMING COMPONENTS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 13/30252112 DC : 0 | BS EN ISO 11970 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS |
| 17/30354713 DC : 0 | BS ISO 19642-8 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 4: DIMENSIONS AND REQUIREMENTS FOR 30 V A.C. AND 60 V D.C. SINGLE CORE ALUMINIUM CONDUCTOR CABLES |
| DIN EN ISO 9809-3:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| 11/30212226 DC : 0 | BS ISO 21672-1 - DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS |
| BS ISO 18762:2016 | Tubes of titanium and titanium alloys. Welded tubes for condensers and heat exchangers. Technical delivery conditions |
| PREN 10164 : DRAFT 2016 | STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
| ISO 15461:2018 | Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 4800-004 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| UNI EN 14592 : 2012 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| BS EN 50525-2-83:2011 | Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Cables for general applications. Multicore cables with crosslinked silicone rubber insulation |
| BS EN ISO 6892-3:2015 | Metallic materials. Tensile testing Method of test at low temperature |
| UNI EN ISO 4136 : 2012 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| DIN EN 16019:2014-06 | RAILWAY APPLICATIONS - AUTOMATIC COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHOD |
| 15/30310220 DC : 0 | BS ISO 5832-3 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANADIUM ALLOY |
| BS EN 62047-9:2011 | Semiconductor devices. Micro-electromechanical devices Wafer to wafer bonding strength measurement for MEMS |
| 17/30357669 DC : 0 | BS ISO 16172 - STEEL SHEET, METALLIC-COATED BY THE CONTINUOUS HOT-DIP PROCESS FOR CORRUGATED STEEL PIPE |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| BS EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming. Technical delivery conditions |
| DIN EN ISO 7866:2013-01 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
| BS EN 15551:2017 | Railway applications. Railway rolling stock. Buffers |
| UNI EN 4800-005 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 11/30239433 DC : 0 | BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| DD CEN/TS 15718:2011 | Railway applications. Wheelsets and bogies. Product requirements for cast wheels |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| BS EN 13749:2011 | Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames |
| I.S. EN 13445-2:2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| I.S. EN 4800-006:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| BS ISO 5950:2012 | Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 5838-1:2013 | Implants for surgery Metallic skeletal pins and wires Part 1: General requirements |
| CEI EN 62561-2 : 2013 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| I.S. EN 62561-2:2012 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES (IEC 62561-2:2012 (MOD)) |
| API 9A : 2011 : INC : ERR 1 : 2012 | SPECIFICATION FOR WIRE ROPE |
| ONORM EN 13600 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| PREN 10210-1 : DRAFT 2016 | HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL |
| DIN EN 14893 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| ISO 13976:2016 | Hot-rolled steel sheet in coils of structural quality and heavy thickness |
| PREN 764-4 : DRAFT 2012 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| I.S. EN ISO 9809-3:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| I.S. EN 16914:2017 | ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
| API SPEC 9A : 2011 | SPECIFICATION FOR WIRE ROPE |
| BS ISO 5952:2011 | Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance |
| ISO 9364:2017 | Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
| ISO 14590:2016 | Cold-reduced steel sheet of high tensile strength and low yield point with improved formability |
| PREN 10149-2 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS |
| BS EN 14592 : 2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| I.S. EN ISO/ASTM 52921:2016 | STANDARD TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES (ISO/ASTM 52921:2013) |
| I.S. EN 754-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| PREN 131-2 : DRAFT 2009 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
| I.S. EN 12449:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| I.S. EN 16124:2011 | FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS |
| I.S. EN 4800-002:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| ISO/TS 35105:2018 | Petroleum and natural gas industries Arctic operations Material requirements for arctic operations |
| UNE 27700:2013 | Systems and equipments to improve the stability and floatability reserve of vessels and floating structrures by inflatable means, in case of water ingress or excessive listing. Requirements and test methods for the flotation modules. |
| ISO 3573:2012 | Hot-rolled carbon steel sheet of commercial and drawing qualities |
| BS EN 13445-2 : 2014 | UNFIRED PRESSURE VESSELS - PART 2: MATERIALS |
| ISO 683-1:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering |
| ISO 6361-1:2011 | Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery |
| UNI EN ISO 26203-1 : 2010 | METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS |
| ISO 26203-1:2018 | Metallic materials — Tensile testing at high strain rates — Part 1: Elastic-bar-type systems |
| PREN 10272 : DRAFT 2013 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| EN ISO 7500-1:2018 | Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018) |
| PREN 12797 : DRAFT 2017 | BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| BS ISO 13887:2017 | Steel sheet, cold-reduced, of higher yield strength with improved formability |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| BS ISO 11513:2011 | Gas cylinders. Refillable welded steel cylinders containing materials for subatmospheric gas packaging (excluding acetylene). Design, construction, testing, use and periodic inspection |
| I.S. EN 10207:2017 | STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS |
| UNE-EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
| UNI EN 1563 : 2012 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| NF EN ISO 6892-2 : 2011 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| CEI EN 61788-18 : 2014 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| UNI EN 16124 : 2012 | FOUNDING - LOW-ALLOYED FERRITIC SPHEROIDAL GRAPHITE CAST IRONS FOR ELEVATED TEMPERATURE APPLICATIONS |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 3273 : 2017 | Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
| UNE-EN ISO 9693-1:2012 | Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012) |
| UNI EN 4700-007 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| S.R. CEN/TR 16748:2014 | ALUMINIUM AND ALUMINIUM ALLOYS - MECHANICAL POTENTIAL OF AL-SI ALLOYS FOR HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CASTING |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| DIN EN ISO 7500-1:2016-05 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015) |
| DIN EN ISO 15630-1:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
| ISO 7778:2014 | Through-thickness characteristics for steel products |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| I.S. EN 14811:2006 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| IEC 62917:2016 | Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires |
| ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
| I.S. EN 50149:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - COPPER AND COPPER ALLOY GROOVED CONTACT WIRES |
| DIN EN 10216-5:2014-03 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| I.S. EN 1562:2012 | FOUNDING - MALLEABLE CAST IRONS |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| ISO 14737:2015 | Carbon and low alloy cast steels for general applications |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| DIN EN 755-2:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
| DIN EN 755-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN ISO 15614-13:2012-10 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| DIN EN ISO 7441:2015-04 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015) |
| DIN EN 1520:2011-06 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| DIN EN 12842:2012-11 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| DIN EN 1442:2008-04 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DIN EN ISO 22674:2016-09 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
| DIN EN 12101-3:2015-12 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| DIN EN 1594:2013-12 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
| DIN EN 10305-6:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| UNE-EN 10120:2018 | Steel sheet and strip for welded gas cylinders |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN 12167:2015-12 (Draft) | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
| DIN EN 12168:2015-12 (Draft) | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| DIN EN ISO 7711-2:2011-10 | Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011) |
| DIN EN 10269:2014-02 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 12164:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| DIN EN 12163:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
| DIN EN 14359:2011-04 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| BS EN 12450:2012 | Copper and copper alloys. Seamless, round copper capillary tubes |
| BS EN 10216-4:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
| BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
| BS EN 14195:2014 | Metal framing components for gypsum board systems. Definitions, requirements and test methods |
| UNE-EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
| UNE-EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| UNE-EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| BS EN 12163:2011 | Copper and copper alloys. Rod for general purposes |
| UNE-EN 1977:2013 | Copper and copper alloys - Copper drawing stock (wire rod) |
| UNE-EN 12101-3:2016 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| BS EN 754-2:2016 | Aluminium and aluminium alloys. Cold drawn rod/bar and tube Mechanical properties |
| DIN EN 10305-3:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| UNE-EN 545:2011 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| BS EN 1172:2011 | Copper and copper alloys. Sheet and strip for building purposes |
| BS EN 10270-1 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| UNE-EN 754-2:2017 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
| ISO 5832-3:2016 | Implants for surgery Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| ONORM EN 10216-2 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| UNE-EN ISO 11120:2015 | Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
| BS EN 13148:2010 | Copper and copper alloys. Hot-dip tinned strip |
| UNE-EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| UNE-EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| ONORM EN 1706 : 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES |
| ONORM EN 13094 : 2015 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| DIN EN 10270-2:2012-01 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
| I.S. EN 10216-3:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN 1559-2:2014-12 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| ONORM EN 12493 : 2015 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| I.S. EN 12450:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 10305-5:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| I.S. EN 10216-1:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 13600:2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 11120:2015 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
| EN ISO 15841:2014 | Dentistry - Wires for use in orthodontics (ISO 15841:2014) |
| I.S. EN 10305-6:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 10273:2016 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| I.S. EN 1594:2013 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
| I.S. EN 10314:2016 | METHOD FOR THE DERIVATION OF MINIMUM VALUES OF PROOF STRENGTH OF STEEL AT ELEVATED TEMPERATURES |
| I.S. EN 12166:2016 | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| I.S. EN 12842:2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13148:2010-12 | Copper and copper alloys - Hot-dip tinned strip |
| ONORM EN 13262 : 2012 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| DIN EN 12450:2013-01 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 131-2:2010 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| I.S. EN 10152:2017 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| I.S. EN 1982:2017 | COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS |
| I.S. EN ISO 15156-2:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| DIN EN 12451:2012-08 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| DIN EN 13674-1:2011-04 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 13674-1:2017-07 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| DIN EN 10028-1:2017-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 7441:2015 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015) |
| I.S. EN 10209:2013 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10270-1:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| ONORM EN 13261 : 2012 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| I.S. EN 10216-5:2013 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 1172:2012-02 | Copper and copper alloys - Sheet and strip for building purposes |
| I.S. EN 1520:2011 | PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| I.S. EN 13599:2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| I.S. EN 12167:2016 | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
| I.S. EN 13835:2012 | FOUNDING - AUSTENITIC CAST IRONS |
| I.S. EN 13605:2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| I.S. EN 1396:2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| I.S. EN 10303:2015 | THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| I.S. EN ISO 10423:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| I.S. EN 10205:2016 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| I.S. EN 1977:2013 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| I.S. EN 12452:2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| DIN EN 10088-2:2014-12 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN ISO 15156-2:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
| DIN EN 12452:2012-08 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| I.S. EN 1172:2011 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| I.S. EN ISO 18265:2013 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| I.S. EN 12168:2016 | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| I.S. EN 14140:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 1442:2017 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 12732:2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| I.S. EN 10270-2:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
| I.S. EN 10270-3:2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| I.S. EN 12101-3:2015 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| I.S. EN 10149-1:2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 13230-3:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS - PART 3: TWIN-BLOCK REINFORCED SLEEPERS |
| I.S. EN 754-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 2: MECHANICAL PROPERTIES |
| I.S. EN 10269:2013 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| DIN EN 13110:2017-05 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| I.S. EN 13602:2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| I.S. EN 1559-2:2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| I.S. EN 13348:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM |
| I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| I.S. EN 12392:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT |
| I.S. EN 15048-2:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| I.S. EN 10272:2016&LC:2016 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| I.S. EN 1561:2011 | FOUNDING - GREY CAST IRONS |
| I.S. EN ISO 15841:2014 | DENTISTRY - WIRES FOR USE IN ORTHODONTICS (ISO 15841:2014) |
| I.S. EN 13604:2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| I.S. EN 545:2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14195:2014 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 9018:2015 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS (ISO 9018:2015) |
| I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| I.S. EN 14893:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN ISO 17641-2:2015 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HOT CRACKING TESTS FOR WELDMENTS - ARC WELDING PROCESSES - PART 2: SELF-RESTRAINT TESTS (ISO 17641-2:2015) |
| EN ISO 15156-3:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
| I.S. EN 12451:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| DIN EN ISO 11439:2013-09 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
| I.S. EN 10268:2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 12952-5:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| I.S. EN 10305-4:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN ISO 11970:2016-08 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016) |
| I.S. EN ISO 10451:2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| I.S. EN 10305-1:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| I.S. EN 10305-3:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| DIN EN 1977:2013-04 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| I.S. EN ISO 15614-13:2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
| I.S. EN 13674-1:2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| I.S. EN ISO 11970:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016) |
| I.S. EN 12164:2016 | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| DIN EN 755-2:1997-08 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
| I.S. EN 764-4:2014 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| I.S. EN 10028-1:2017 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 1564:2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS |
| I.S. EN 12735-2:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 2: TUBES FOR EQUIPMENT |
| I.S. EN ISO 22674:2016 | DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES (ISO 22674:2016) |
| I.S. EN 14359:2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| I.S. EN ISO 11439:2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013) |
| I.S. EN 755-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 12732:2000-09 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| I.S. EN 12163:2016 | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
| DIN EN 12493:2017-01 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| UNI EN 12493 : 2014 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| VDI 3405-2-1 : 2015 COR 2017 | ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER BEAM MELTING OF METALLIC PARTS; MATERIAL DATA SHEET ALUMINIUM ALLOY ALSI10MG |
| KTA 3407 : 2014 | PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL |
| ONORM EN ISO 4136 : 2013 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST (ISO 4136:2012) |
| VDI 2700 Blatt 14:2011-09 | Securing of loads on road vehicles - Determination of coefficients of friction |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| UNE-EN 16482:2014 | Founding - Continuous cast iron bars |
| DIN EN 1563:2015-07 (Draft) | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| PREN 10305-5 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
| NF EN ISO 9809-3 : 2011 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| DIN EN ISO 18592:2010-05 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS |
| DIN ISO 5832-11:2015-12 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 11: WROUGHT TITANIUM 6-ALUMINIUM 7-NIOBIUM ALLOY (ISO 5832-11:2014) |
| 11/30242619 DC : 0 | BS ISO 5001 - COLD-REDUCED CARBON STEEL SHEET FOR VITREOUS ENAMELLING |
| 13/30252133 DC : 0 | BS ISO 14737 - CAST NON-ALLOY AND LOW ALLOY STEELS FOR GENERAL APPLICATIONS |
| DIN EN 15827:2011-06 | Railway applications - Requirements for bogies and running gears |
| I.S. EN 50288-1:2013 | MULTI-ELEMENT METALLIC CABLES USED IN ANALOGUE AND DIGITAL COMMUNICATION AND CONTROL - PART 1: GENERIC SPECIFICATION |
| 11/30212253 DC : 0 | BS ISO 14604 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF FRACTURE STRAIN |
| BS EN 16079:2011 | Founding. Compacted (vermicular) graphite cast irons |
| 15/30296029 DC : 0 | BS ISO 4955 - HEAT-RESISTANT STEELS |
| BS EN ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel |
| 17/30357666 DC : DRAFT AUG 2017 | BS ISO 5952 - STEEL SHEET, HOT-ROLLED, OF STRUCTURAL QUALITY WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| BS EN ISO 9809-2:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
| BS ISO 5832-4:2014 | Implants for surgery. Metallic materials Cobalt-chromium-molybdenum casting alloy |
| BS EN ISO 9809-3:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
| BS ISO 14590:2016 | Cold-reduced steel sheet of high tensile strength and low yield point with improved formability |
| BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
| BS ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
| BS ISO 8168:2008 | Aerospace. Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1100 MPa. Procurement specification |
| ISO 5832-11:2014 | Implants for surgery — Metallic materials — Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| 12/30255911 DC : 0 | BS ISO 6316 - HOT-ROLLED STEEL STRIP OF STRUCTURAL QUALITY |
| BS ISO/ASTM 52921 : 2013 | STANDARD TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES |
| BS ISO 9154:2016 | Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| BS EN ISO 17078-4:2010 | Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
| UNE-EN 50149:2012 | Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires |
| ISO 5001:2012 | Cold-reduced carbon steel sheet for vitreous enamelling |
| 15/30328590 DC : 0 | BS ISO 8168 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF HEAT AND CORROSION RESISTING STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION |
| UNE-EN 50525-2-83:2012 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation |
| 12/30259070 DC : 0 | BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| BS ISO 27306:2016 | Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components |
| DIN EN 10152:2015-10 (Draft) | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10205:1992-01 | COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE |
| 13/30288578 DC : 0 | BS EN 10314 - METHOD FOR THE DERIVATION OF MINIMUM VALUES OF PROOF STRENGTH OF STEEL AT ELEVATED TEMPERATURES |
| 17/30334112 DC : 0 | BS ISO 20805 - HOT-ROLLED STEEL SHEET IN COILS OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY AND HEAVY THICKNESS FOR COLD FORMING |
| BS ISO 16143-3:2014 | Stainless steels for general purposes Wire |
| NF EN ISO 15630-1 : 2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
| BS EN 15827:2011 | Railway applications. Requirements for bogies and running gears |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| UNE-EN 10338:2016 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| BS EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions |
| 13/30266592 DC : 0 | BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| ISO 11119-1:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
| BS EN ISO 9693-1:2012 | Dentistry. Compatibility testing Metal-ceramic systems |
| 15/30312507 DC : 0 | BS ISO 3575 - CONTINUOUS HOT-DIP ZINC-COATED AND ZINC-IRON ALLOY-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
| PREN 14782 : DRAFT 2015 | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| 17/30347067 DC : 0 | BS EN 10340-1 - STEEL CASTINGS FOR STRUCTURAL USES - PART 1: GENERAL |
| 15/30326949 DC : 0 | BS EN 62561-2 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| 13/30257993 DC : 0 | BS EN ISO 6892-3 - METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE |
| 12/30250152 DC : 0 | BS ISO 16143-3 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE |
| BS EN 14638-3:2010 | Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded carbon steel cylinders made to a design justified by experimental methods |
| 17/30354758 DC : DRAFT JUL 2017 | BS ISO 185 - GREY CAST IRONS - CLASSIFICATION AND SPECIFICATION |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| 13/30279823 DC : 0 | BS EN 16019 - RAILWAY APPLICATIONS - AUTOMATIC COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHOD |
| UNI EN 4700-004 : 2011 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| BS EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control Generic specification |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 14/30263397 DC : 0 | BS EN ISO 22674 - DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES |
| BS EN 4800-006:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production forgings |
| 18/30362597 DC : 0 | BS ISO 5832-12 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 12: WROUGHT COBALT-CHROMIUM-MOLYBDENUM ALLOY |
| PREN 754-1 : DRAFT 2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| CEI EN 50525-2-11 : 2012 | ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-11: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH THERMOPLASTIC PVC INSULATION |
| 15/30324463 DC : 0 | BS EN 755-2 - ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
| BS EN 4800-005:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Forging stock |
| 14/30312176 DC : 0 | BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS |
| BS ISO 4990:2015 | Steel castings. General technical delivery requirements |
| UNI EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| BS EN 50149:2012 | Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires |
| 13/30288572 DC : 0 | BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| BS ISO 13270:2013 | Steel fibres for concrete. Definitions and specifications |
| UNE-EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| BS ISO 6362-2:2014 | Wrought aluminium and aluminium alloys. Extruded rods/bars, tubes and profiles Mechanical properties |
| DIN EN ISO 16120-1:2017-09 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 12/30267860 DC : 0 | BS EN 16482 - FOUNDING - CONTINUOUS CAST IRON BARS |
| ONORM EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| ISO 16631:2016 | Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement |
| UNI EN ISO 15630-2 : 2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
| 13/30288575 DC : 0 | BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 14/30287989 DC : 0 | BS ISO 4995 - HOT-ROLLED STEEL SHEET OF STRUCTURAL QUALITY |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| CEI EN 61788-19 : 2014 | SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS |
| ONORM EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| 11/30234408 DC : 0 | BS ISO 15179 - HOT-ROLLED TWIN-ROLL CAST STEEL SHEET OF STRUCTURAL QUALITY AND HIGH STRENGTH STEEL |
| 12/30248681 DC : 0 | BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| 10/30217417 DC : 0 | BS EN ISO 15614-13 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
| EN 13001-3-5:2016 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| BS EN 4800-004:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Wire |
| ISO 5950:2012 | Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| 15/30324460 DC : 0 | BS EN 754-1 - ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS ISO 5832-11:2014 | Implants for surgery. Metallic materials Wrought titanium 6-aluminium 7-niobium alloy |
| 17/30352970 DC : 0 | BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| UNI EN 4800-008 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| BS EN ISO 17296-3:2016 | Additive manufacturing. General principles Main characteristics and corresponding test methods |
| 11/30230615 DC : 0 | BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING |
| 17/30352966 DC : 0 | BS EN ISO 15630-2 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC AND LATTICE GIRDER |
| PREN 10222-1 : DRAFT 2012 | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| PREN 10305-6 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| BS EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire General requirements |
| I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| BS EN 1563:2011 | Founding. Spheroidal graphite cast irons |
| BS EN ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
| UNE-EN 62561-2:2012 | Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes |
| API 19G4 : 2011 | PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| UNE-EN 50525-2-11:2012 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation |
| ISO 15208:2012 | Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality |
| ASTM F 3122 : 2014 | Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes |
| BS EN ISO 6892-2:2011 | Metallic materials. Tensile testing Method of test at elevated temperature |
| I.S. EN 61788-6:2011 | SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
| UNE-EN 13674-4:2007 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
| ONORM EN ISO 15630-3 : 2011 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| I.S. EN ISO 5832-2:2012 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM (ISO 5832-2:2018) |
| I.S. EN ISO 15630-2:2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
| NF EN ISO 26203-2 : 2011 | METALLIC MATERIALS - TENSILE TESTING METHOD AT HIGH STRAIN RATES - PART 2: SERVO-HYDRAULIC AND OTHER TEST SYSTEMS |
| I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
| CEI EN 50525-2-83 : 2012 | ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-83: CABLES FOR GENERAL APPLICATIONS - MULTICORE CABLES WITH CROSSLINKED SILICONE RUBBER INSULATION |
| I.S. EN 13749:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - METHOD OF SPECIFYING THE STRUCTURAL REQUIREMENTS OF BOGIE FRAMES |
| UNI EN 4700-003 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| I.S. EN ISO 6892-2:2011 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| ISO 683-18:2014 | Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright steel products |
| I.S. EN 10294-2:2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| I.S. EN ISO 26203-2:2011 | METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 2: SERVO-HYDRAULIC AND OTHER TEST SYSTEMS (ISO 26203-2:2011) |
| I.S. EN 4800-004:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| BS ISO 16172:2011 | Continuous hot-dip metallic coated steel sheet for corrugated steel pipe |
| I.S. EN 13110:2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| EN IEC 62561-2:2018 | Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| PREN 14509 : DRAFT 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| BS ISO 20805:2017 | Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming |
| UNI EN 13674-4 : 2010 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| CEN/TR 16748:2014 | Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting |
| I.S. EN 15551:2017 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| UNE-EN ISO 898-2:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| I.S. EN ISO 5755:2012 | SINTERED METAL MATERIALS - SPECIFICATIONS (ISO 5755:2012) |
| EN 1562:2012 | Founding - Malleable cast irons |
| ISO 6892-2:2018 | Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature |
| UNE-EN 10205:2017 | Cold reduced tinmill products - Blackplate |
| 17/30347070 DC : 0 | BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
| UNI EN 4800-007 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| PREN 15566 : DRAFT 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| UNE-EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| UNI EN ISO 12004-2 : 2009 | METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF FORMING-LIMIT CURVES - PART 2: DETERMINATION OF FORMING-LIMIT CURVES IN THE LABORATORY |
| EN 13674-4:2006+A1:2009 | Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
| UNI EN ISO 7866 : 2012 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING |
| PREN 1559-2 : DRAFT 2012 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| UNE-EN 12952-5:2012 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| ISO 16172:2011 | Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe |
| DIN EN 1564:2012-01 | Founding - Ausferritic spheroidal graphite cast irons |
| ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire |
| EN ISO 15630-2:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2010) |
| ISO 6892-4:2015 | Metallic materials Tensile testing Part 4: Method of test in liquid helium |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| ISO 5000:2011 | Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 5002:2013 | Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
| I.S. EN 10270-1:2011+A1:2017 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 1: PATENTED COLD DRAWN UNALLOYED SPRING STEEL WIRE |
| EN 60317-27:2014 | Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire |
| ISO 5832-7:2016 | Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy |
| UNE-EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
| IEC 62561-2:2018 | Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes |
| I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| ISO 6931-1:2016 | Stainless steels for springs Part 1: Wire |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| EN 1561:2011 | Founding - Grey cast irons |
| EN 754-2:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
| DIN EN 12392:2016-08 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| DIN EN 754-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 13110:2012-07 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN 754-2:2016-05 (Draft) | ALUMINIUM AND ALUMINIUM ALLOYS - COLD DRAWN ROD/BAR AND TUBE - PART 2: MECHANICAL PROPERTIES |
| DIN EN 10216-3:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
| DIN EN 10303:2016-02 | THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| DIN EN 14276-1:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| DIN EN 14140:2015-03 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| DIN EN ISO 15841:2014-12 | Dentistry - Wires for use in orthodontics (ISO 15841:2014) |
| UNI EN 10216-2 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN ISO 9018:2016-02 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TENSILE TEST ON CRUCIFORM AND LAPPED JOINTS (ISO 9018:2015) |
| DIN EN 12166:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| UNE-EN 14509:2014 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| ISO 17078-4:2010 | Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
| BS EN 13674-1 : 2011 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 1: VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| UNE-EN ISO 9018:2016 | Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015) |
| BS EN 12735-2:2016 | Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for equipment |
| BS EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods |
| DIN EN 10305-2:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 10305-5:2010 | Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes |
| UNE-EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| BS EN 1594:2013 | Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements |
| BS EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| UNE-EN 764-4:2015 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| BS EN 10120:2017 | Steel sheet and strip for welded gas cylinders |
| BS EN 12168:1998 | Copper and copper alloys. Hollow rod for free machining purposes |
| UNE-EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| UNE-EN 12842:2013 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| BS EN 1396:2007 | Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications |
| UNE-EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| UNE-EN 13749:2012 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
| DIN EN ISO 17641-2:2016-03 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HOT CRACKING TESTS FOR WELDMENTS - ARC WELDING PROCESSES - PART 2: SELFRESTRAINT TESTS (ISO 176412:2015) |
| UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN ISO 15841:2015 | Dentistry - Wires for use in orthodontics (ISO 15841:2014) |
| UNE-EN 1982:2018 | Copper and copper alloys - Ingots and castings |
| UNE-EN 10216-4:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
| EN 14276-1:2020 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| DIN EN 10305-5:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| UNE-EN 12450:2013 | Copper and copper alloys - Seamless, round copper capillary tubes |
| UNE-EN 1564:2012 | Founding - Ausferritic spheroidal graphite cast irons |
| UNE-EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| ONORM EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| UNI EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 14276-1 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| ONORM EN 14276-1 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| EN 13094:2015 | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
| EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
| I.S. EN 13094:2015 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| UNI EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ONORM EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| EN ISO 7711-2:2011 | Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011) |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN ISO 7441:2015 | Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015) |
| UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10269 : 2013 | Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures |
| UNI EN 12952-5 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| UNI EN 10268 : 2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN 1172 : 2012 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| UNI EN 13599 : 2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| UNI EN 13835 : 2012 | FOUNDING - AUSTENITIC CAST IRONS |
| UNI EN ISO 10451 : 2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| UNI EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN ISO 18265 : 2014 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
| UNI EN 1559-2 : 2014 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| UNI EN 14893 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| UNI EN 12451 : 2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| ONORM EN 14592 : 2012 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| UNI EN 12842 : 2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| UNI EN 1561 : 2011 | FOUNDING - GREY CAST IRONS |
| UNI EN 1520 : 2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement |
| UNI EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| UNI EN 1564 : 2011 | FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS |
| UNI EN 1594 : 2013 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
| UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
| UNI EN ISO 7711-2 : 2011 | DENTISTRY - ROTARY DIAMOND INSTRUMENTS - PART 2: DISCS |
| UNI EN 10216-4 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| UNI EN 12450 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| UNI EN 10216-1 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| UNI EN 545 : 2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 10270-2 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 2: OIL HARDENED AND TEMPERED SPRING STEEL WIRE |
| UNI EN 14140 : 2015 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| UNI EN 10209 : 2013 | COLD ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 12452 : 2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| UNI EN 10216-3 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| UNI EN 1977 : 2013 | COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD) |
| UNI EN 13602 : 2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| ONORM EN ISO 15614-13 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
| UNI EN 10149-1 : 2013 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| UNI EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| UNI EN 15827 : 2011 | RAILWAY APPLICATIONS - REQUIREMENTS FOR BOGIES AND RUNNING GEARS |
| UNI EN 13604 : 2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| UNI EN 4800-001 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| UNI CEN/TS 15718 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| DIN EN 16124:2012-02 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
| ASTM F 2921 : 2013 | TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES |
| UNI EN ISO 18592 : 2010 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS |
| UNI EN ISO 26203-2 : 2011 | METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 2: SERVO-HYDRAULIC AND OTHER TEST SYSTEMS |
| 12/30258894 DC : 0 | BS ISO 3574 - COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
| DIN EN ISO 6892-3:2015-07 | METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
| I.S. EN ISO 9693-1:2012 | DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS (ISO 9693-1:2012) |
| NF EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| 13/30252103 DC : 0 | BS ISO 4991 - STEEL CASTINGS FOR PRESSURE PURPOSES |
| ISO 4995:2014 | Hot-rolled steel sheet of structural quality |
| 14/30278586 DC : 0 | BS ISO 606 - SHORT-PITCH TRANSMISSION PRECISION ROLLER AND BUSH CHAINS, ATTACHMENTS AND ASSOCIATED CHAIN SPROCKETS |
| BS EN 4800-008:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Pre-production and production castings |
| DIN EN 14353:2016-02 (Draft) | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ISO 15698-1:2012 | Steel for the reinforcement of concrete — Headed bars — Part 1: Requirements |
| BS EN ISO 22068:2014 | Sintered-metal injection-moulded materials. Specifications |
| ISO 8535-1:2016 | Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes |
| PREN 10205 : DRAFT 2014 | COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| UNI EN 4800-003 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| 16/30340174 DC : 0 | BS ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
| DIN EN 13749:2011-06 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
| DIN ISO 5832-7:2001-07 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 7: FORGEABLE AND COLD-FORMED COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY (ISO 5832-7:2016) |
| 09/30196316 DC : 0 | BS ISO 6361-1 - WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS, STRIPS AND PLATES - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| 11/30234411 DC : 0 | BS ISO 15208 - CONTINUOUS HOT-DIP ZINC-COATED TWIN-ROLL CAST STEEL SHEET OF COMMERCIAL QUALITY |
| ISO 18762:2016 | Tubes of titanium and titanium alloys Welded tubes for condensers and heat exchangers Technical delivery conditions |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| BS ISO 15211:2012 | Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN ISO 5832-4:2015-12 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 4: COBALT-CHROMIUM-MOLYBDENUM CASTING ALLOY (ISO 5832-4:2014) |
| 15/30325003 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
| UNI EN 16079 : 2012 | FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
| BS EN ISO 5755:2012 | Sintered metal materials. Specifications |
| NACE TM 03 16 : 2016 | FOUR-POINT BEND TESTING OF MATERIALS FOR OIL AND GAS APPLICATIONS |
| 13/30247837 DC : 0 | BS EN 13094 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| UNE-EN ISO 5832-3:2017 | Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016) |
| UNI EN ISO 22068 : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| BS EN 60317-27:2014 | Specifications for particular types of winding wires Paper tape covered rectangular copper wire |
| 17/30334109 DC : 0 | BS ISO 14788 - STEEL SHEET, ZINC-5% ALUMINIUM ALLOY-COATED BY THE CONTINUOUS HOT-DIP PROCESS, OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| ONORM EN 1065 : 2013 | ADJUSTABLE TELESCOPIC STEEL PROPS - PRODUCT SPECIFICATIONS, DESIGN AND ASSESSMENT BY CALCULATION AND TESTS |
| PREN 13674-4 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| DIN EN 10139:2016-06 | COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| ISO 16540:2015 | Corrosion of metals and alloys Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method |
| 12/30252148 DC : 0 | BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS |
| 14/30301272 DC : 0 | BS EN 10205 - COLD REDUCED TINMILL PRODUCTS - BLACKPLATE |
| 12/30266615 DC : 0 | BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS |
| BS ISO 16220:2017 | Magnesium and magnesium alloys. Magnesium alloy ingots and castings |
| BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
| 12/30266422 DC : DRAFT JULY 2012 | BS EN ISO 4136 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST |
| BS EN 4800-001:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Plate, sheet and strip |
| BS EN ISO 15156-3:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| DIN EN 14592:2012-07 | Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012) |
| DIN EN 13674-4:2016-05 (Draft) | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| 12/30246885 DC : 0 | BS ISO 16842 - METALLIC MATERIALS - SHEET AND STRIP - BIAXIAL TENSILE TESTING METHOD USING CRUCIFORM SPECIMEN |
| 13/30248090 DC : 0 | BS ISO 11951 - COLD-REDUCED BLACKPLATE IN COIL FORM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL |
| 14/30294825 DC : 0 | BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| BS ISO 15179:2012 | Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| 13/30288195 DC : 0 | BS EN 10303 - THIN MAGNETIC STEEL SHEET AND STRIP FOR USE AT MEDIUM FREQUENCIES |
| BS EN 61788-18:2013 | Superconductivity Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| 13/30241415 DC : 0 | BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| DIN EN 14638-3:2012-06 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods (includes Corrigendum AC:2012) |
| BS ISO 16540:2015 | Corrosion of metals and alloys. Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method |
| BS ISO 17440:2014 | Cranes. General design. Limit states and proof of competence of forged steel hooks |
| BS ISO 3575:2011 | Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities |
| BS EN 4800-002:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Bar and section |
| 15/30324991 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| BS EN 4800-003:2010 | Aerospace series. Titanium and titanium alloys. Technical specification Tube |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| DIN EN 16079:2012-02 | Founding - Compacted (vermicular) graphite cast irons; German version EN 16079:2011 |
| BS ISO 6722-2:2013 | Road vehicles. 60 V and 600 V single-core cables Dimensions, test methods and requirements for aluminium conductor cables |
| 15/30331856 DC : 0 | BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING |
| I.S. EN 61788-18:2013 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| BS EN 16482:2014 | Founding. Continuous cast iron bars |
| 16/30326542 DC : 0 | BS ISO 5832-7 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 7: FORGEABLE AND COLD-FORMED COBALT-CHROMIUM-NICKEL-MOLYBDENUM-IRON ALLOY |
| UNI EN 10294-2 : 2012 | HOLLOW BARS FOR MACHINING - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEELS WITH SPECIFIED MACHINABILITY PROPERTIES |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| I.S. EN 50525-2-83:2011 | ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-83: CABLES FOR GENERAL APPLICATIONS - MULTICORE CABLES WITH CROSSLINKED SILICONE RUBBER INSULATION |
| 15/30324997 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 13/30280527 DC : 0 | BS ISO 4999 - CONTINUOUS HOT-DIP TERNE (LEAD ALLOY) COATED COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
| UNI EN ISO 21672-1 : 2012 | DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN IEC 62561-2:2018 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| ISO 10799-1:2011 | Cold-formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| DIN EN ISO 9809-1:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| UNI EN 14638-3 : 2010 | TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED RECEPTACLES OF A CAPACITY NOT EXCEEDING 150 LITRES - PART 3: WELDED CARBON STEEL CYLINDERS MADE TO A DESIGN JUSTIFIED BY EXPERIMENTAL METHODS |
| DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
| ISO 15179:2012 | Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel |
| BS ISO 606:2015 | Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
| UNE-EN ISO 11118:2016 | Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015) |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| UNE-EN 14592:2009 | Timber structures - Dowel-type fasteners - Requirements |
| I.S. EN 4800-005:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| DIN EN 14811:2016-08 (Draft) | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| ISO 10855-1:2018 | Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers |
| I.S. EN ISO 6892-3:2015 | METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
| ISO 11119-3:2013 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
| ISO 3575:2016 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
| UNI EN ISO 9693-1 : 2012 | DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS |
| I.S. EN 10338:2015 | HOT ROLLED AND COLD ROLLED NON-COATED PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| ONORM EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
| ISO 13887:2017 | Steel sheet, cold-reduced, of higher yield strength with improved formability |
| UNI EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| ISO 4999:2014 | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
| ISO 5832-1:2016 | Implants for surgery — Metallic materials — Part 1: Wrought stainless steel |
| I.S. EN 14460:2018 | EXPLOSION RESISTANT EQUIPMENT |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| S.R. CEN/TR 14585-3:2017 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD |
| EN 14460:2018 | Explosion resistant equipment |
| PREN 10269 : DRAFT 2011 | STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES |
| ISO 14788:2017 | Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
| I.S. EN 10346:2015 | CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN ISO 15630-3:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| PREN 10273 : DRAFT 2013 | HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN 10207:2017 | Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars |
| ISO 20032:2013 | Method for evaluation of tensile properties of metallic superplastic materials |
| UNE-EN 1562:2012 | Founding - Malleable cast irons |
| DIN EN 12493:2014-03 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| UNI EN 14811 : 2010 | RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
| ISO 16143-1:2014 | Stainless steels for general purposes — Part 1: Corrosion-resistant flat products |
| PREN 13674-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| PREN 14195 : DRAFT 2011 | METAL FRAMING COMPONENTS FOR GYPSUM BOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 4700-001 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| ASTM A 1058 : 2014 : REDLINE | Standard Test Methods for Mechanical Testing of Steel Products—Metric |
| ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
| ONORM EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| EN ISO 5832-2:2018 | Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:2018) |
| UNE-EN 485-2:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| ONORM EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| UNE-EN 16124:2012 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
| UNE-EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| DIN EN 10270-3:2012-01 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| EN ISO 26203-1:2018 | Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2018) |
| ISO 5952:2011 | Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance |
| ISO 6316:2012 | Hot-rolled steel strip of structural quality |
| EN 14811:2006+A1:2009 | Railway applications - Track - Special purpose rail - Grooved and associated construction |
| ISO 12891-2:2014 | Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
| ISO 5003:2016 | Flat bottom (Vignole) railway rails 43 kg/m and above |
| ISO 11513:2011 | Gas cylinders Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) Design, construction, testing, use and periodic inspection |
| ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| DIN EN 16914:2015-12 (Draft) | ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
| PREN 10340-2 : DRAFT 2017 | STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS |
| EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| I.S. EN 14592:2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| ISO 11515:2013 | Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
| EN ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010) |
| ISO 6362-1:2012 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery |
| I.S. EN 13674-4:2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| I.S. EN 755-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED ROD/BAR, TUBE AND PROFILES - PART 2: MECHANICAL PROPERTIES |
| I.S. EN ISO 26203-1:2018 | METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS (ISO 26203-1:2018) |
| I.S. EN 62047-9:2011 | SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 9: WAFER TO WAFER BONDING STRENGTH MEASUREMENT FOR MEMS |
| I.S. EN 10263-1:2017 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| ISO 6722-2:2013 | Road vehicles — 60 V and 600 V single-core cables — Part 2: Dimensions, test methods and requirements for aluminium conductor cables |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| ONORM EN ISO 3183 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
| ONORM EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| DIN EN 13094:2015-07 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION |
| DIN EN 10268:2013-12 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 15048-2:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| DIN EN 10216-4:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| DIN EN 10314:2016-10 | METHOD FOR THE DERIVATION OF MINIMUM VALUES OF PROOF STRENGTH OF STEEL AT ELEVATED TEMPERATURES |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| DIN EN 485-2:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| BS EN 1564:2011 | Founding. Ausferritic spheroidal graphite cast irons |
| UNE-EN 1172:2012 | Copper and copper alloys - Sheet and strip for building purposes |
| BS EN 12392:2016 | Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
| BS EN 13605:2013 | Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
| BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| BS EN 1559-2:2014 | Founding. Technical conditions of delivery Additional requirements for steel castings |
| UNE-EN 14140:2015 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
| UNE-EN 10270-2:2012 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
| ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
| UNE-EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| I.S. EN 10139:2016 | COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
| BS EN 10209:2013 | Cold rolled low carbon steel flat products for vitreous enameling. Technical delivery conditions |
| BS EN 10216-5:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| BS EN 12735-1:2016 | Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for piping systems |
| UNE-EN 13602:2014 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| BS EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| BS EN ISO 15156-2:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
| UNE-EN 10303:2016 | Thin magnetic steel strip and sheet for use at medium frequencies |
| UNE-EN 10216-2:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| IEC 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| ISO 9693-1:2012 | Dentistry Compatibility testing Part 1: Metal-ceramic systems |
| ISO 21672-1:2012 | Dentistry — Periodontal probes — Part 1: General requirements |
| ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding |
| BS EN 755-1:2016 | Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles Technical conditions for inspection and delivery |
| ISO 17641-2:2015 | Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 2: Self-restraint tests |
| UNE-EN 12452:2013 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| BS EN 14140:2014 | LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 131-2 : 2010 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| BS EN 10216-3:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS EN 12451:2012 | Copper and copper alloys. Seamless, round tubes for heat exchangers |
| BS EN 10305-6:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 1561:2011 | Founding. Grey cast irons |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN 12952-5:2011 | Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
| UNI EN 12735-1 : 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS |
| UNE-EN 754-1:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| UNE-EN 13148:2012 | Copper and copper alloys - Hot-dip tinned strip |
| BS EN 10270-3:2011 | Steel wire for mechanical springs Stainless spring steel wire |
| UNE-EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| ONORM EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| UNE-EN ISO 7711-2:2012 | Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011) |
| UNE-EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| ISO 15841:2014 | Dentistry Wires for use in orthodontics |
| UNE-EN 13230-3:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
| UNE-EN 12451:2013 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| ISO 5755:2012 | Sintered metal materials — Specifications |
| BS EN ISO 10423:2009 | Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
| BS EN 15048-2:2007 | Non-preloaded structural bolting assemblies Suitability test |
| BS EN 10314:2002 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| BS EN 764-4:2014 | Pressure equipment Establishment of technical delivery conditions for metallic materials |
| EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| UNE-EN 14195:2015 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| ISO 11118:2015 | Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods |
| BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| UNE-EN ISO 15614-13:2013 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| UNE-EN 10269:2014 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| UNE-EN 13835:2012 | Founding - Austenitic cast irons |
| ISO 22674:2016 | Dentistry — Metallic materials for fixed and removable restorations and appliances |
| BS EN 12167:2011 | Copper and copper alloys. Profiles and bars for general purposes |
| UNE-EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
| UNE-EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013) |
| ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire — Part 1: General requirements |
| I.S. EN 12735-1:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS |
| ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| BS EN 10270-2:2011 | Steel wire for mechanical springs Oil hardened and tempered spring steel wire |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| IEC 60317-27:2013 | Specifications for particular types of winding wires - Part 27: Paper tape covered rectangular copper wire |
| ISO 11120:2015 | Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing |
| BS EN 13230-3:2016 | Railway applications. Track. Concrete sleepers and bearers Twin-block reinforced sleepers |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| BS EN ISO 7441:2015 | Corrosion of metals and alloys. Determination of bimetallic corrosion in atmospheric exposure corrosion tests |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| ISO 26203-2:2011 | Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| BS EN 10305-3:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes |
| UNE-EN 16914:2017 | Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions |
| EN 14276-1:2006+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| UNE-EN 13110:2012 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| IEC 61788-19:2013 | Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors |
| UNE-EN 13600:2014 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| UNE-EN 13094:2015 | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| DIN EN 10270-1:2017-09 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire (includes Amendment A1:2017) |
| ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
| UNE-EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| BS EN 14276-1 : 2006 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| ISO 7711-2:2011 | Dentistry Rotary diamond instruments Part 2: Discs |
| BS EN 13599:2014 | Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
| ISO 7441:2015 | Corrosion of metals and alloys Determination of bimetallic corrosion in atmospheric exposure corrosion tests |
| BS EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions |
| BS EN 10305-1:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes |
| UNE-EN 10216-3:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
| BS EN 12732 : 2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| BS EN ISO 10451:2010 | Dentistry. Contents of technical file for dental implant systems |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| UNE-EN 1594:2014 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| BS EN 12452:2012 | Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers |
| BS EN 1442 : 2006 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNE-EN ISO 18265:2014 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| ISO 22068:2012 | Sintered-metal injection-moulded materials — Specifications |
| I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ISO 9018:2015 | Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints |
| ISO 17296-3:2014 | Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods |
| BS EN 13602:2013 | Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors |
| BS EN 12166:2011 | Copper and copper alloys. Wire for general purposes |
| BS EN 12164:2011 | Copper and copper alloys. Rod for free machining purposes |
| UNE-EN 12732:2014+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| UNE-EN 10149-1:2014 | Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
| UNE-EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| UNE-EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| ISO 18592:2009 | Resistance welding Destructive testing of welds Method for the fatigue testing of multi-spot-welded specimens |
| UNE-EN 10216-5:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| ISO 10451:2010 | Dentistry — Contents of technical file for dental implant systems |
| BS EN 13604:2013 | Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| UNE-EN 10216-1:2014 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| BS EN ISO 11120:2015 | Gas cylinders. Refillable seamless steel tubes of water capacity between 150 l and 3000 l. Design, construction and testing |
| UNE-EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| UNE-EN 10270-3:2012 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| EN ISO 11118 : 2015 COR 2015 | GAS CYLINDERS - NON-REFILLABLE METALLIC GAS CYLINDERS - SPECIFICATION AND TEST METHODS (ISO 11118:2015) |
| UNE-EN ISO 7866:2013 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
| BS EN ISO 11439:2013 | Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| UNE-EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| IEC 61788-6:2011 | Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| BS EN 10149-1:2013 | Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
| DIN EN 13835:2012-04 | FOUNDING - AUSTENITIC CAST IRONS |
| EN 50525-2-83:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation |
| EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| EN ISO 5755:2012 | Sintered metal materials - Specifications (ISO 5755:2012) |
| EN 16019:2014 | Railway applications - Automatic coupler - Performance requirements, specific interface geometry and test method |
| EN 4800-003:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube |
| EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN ISO 26203-2:2011 | Metallic materials - Tensile testing at high strain rates - Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011) |
| EN 14592:2008+A1:2012 | Timber structures - Dowel-type fasteners - Requirements |
| EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| EN 4800-002:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section |
| EN ISO 18592:2009 | Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009) |
| EN 4800-001:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip |
| EN 13599:2014 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
| EN 13835:2012 | Founding - Austenitic cast irons |
| EN ISO 22674:2016 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| ONORM EN 12732 : JUL 2014 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| EN ISO/ASTM 52921:2016 | Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013) |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN 16914:2017 | Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions |
| EN 1564:2011 | Founding - Ausferritic spheroidal graphite cast irons |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN ISO 11120:2015 | Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
| EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| EN 13604:2013 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| EN 15827:2011 | Railway applications - Requirements for bogies and running gears |
| EN ISO 18265:2013 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| EN 16124:2011 | Founding - Low-alloyed ferritic spheroidal graphite cast irons for elevated temperature applications |
| EN ISO 6892-3:2015 | Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015) |
| EN ISO 9809-1:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
| EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| EN ISO 9809-3:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
| EN ISO 10451:2010 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
| EN 15048-2:2016 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
| EN 1594:2013 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| EN ISO 9809-2:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 1977:2013 | Copper and copper alloys - Copper drawing stock (wire rod) |
| EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| EN 13674-1:2011+A1:2017 | Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above |
| EN 16482:2014 | Founding - Continuous cast iron bars |
| EN ISO 17296-3:2016 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| EN 4800-004:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire |
| EN ISO 17641-2:2015 | Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17641-2:2015) |
| EN 13602:2013 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| EN 14195:2014 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| EN 16079:2011 | Founding - Compacted (vermicular) graphite cast irons |
| EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| EN ISO 9693-1:2012 | Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012) |
| EN 4800-006:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings |
| EN ISO 17078-4:2010 | Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
| EN 4800-008:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings |
| EN 4800-007:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock |
| EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
| EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| EN 4800-005:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock |
| EN ISO 21672-1:2012 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| EN ISO 9018:2015 | Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015) |
| EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| I.S. EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 11/30242625 DC : 0 | BS ISO 5838-1 - IMPLANTS FOR SURGERY - METALLIC SKELETAL PINS AND WIRES - PART 1: GENERAL REQUIREMENTS |
| 13/30280934 DC : 0 | BS EN ISO 7500-1 - METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - VERIFICATION AND CALIBRATION OF THE FORCE-MEASURING SYSTEM |
| 15/30327154 DC : 0 | BS EN 16914 - ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS |
| 17/30354719 DC : 0 | BS ISO 19642-6 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 6: DIMENSIONS AND REQUIREMENTS FOR 600 V A.C. OR 900 V D.C., 1000 V A.C. OR 1500 V D.C. SINGLE CORE ALUMINIUM CONDUCTOR CABLES |
| UNE-EN 10294-2:2012 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| UNE-EN ISO 21672-1:2012 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| CEI EN 61788-6 : 2012 | SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
| BS ISO 17296-3 : 2014 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS |
| UNE-EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| 17/30353583 DC : 0 | BS ISO 19427 - STEEL WIRE ROPES - PRE-FABRICATED PARALLEL WIRE STRANDS FOR SUSPENSION BRIDGE MAIN CABLE - SPECIFICATIONS |
| DIN EN ISO 22068:2014-06 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| ISO 15177:2012 | Hot-rolled twin-roll cast carbon steel sheet of commercial quality |
| 16/30339983 DC : 0 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
| 14/30284697 DC : 0 | BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
| PREN 10263-1 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| API 6A REDLINE : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ISO 5951:2013 | Hot-rolled steel sheet of higher yield strength with improved formability |
| UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| 17/30346747 DC : 0 | BS ISO 9328-1 - STEEL FLAT PRODUCTS FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL REQUIREMENTS |
| 17/30341500 DC : 0 | BS EN ISO 5832-2 - IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM |
| BS EN 12493 : 2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| EN ISO 11960:2014 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014) |
| 11/30203534 DC : DRAFT AUG 2011 | BS ISO 13270 - STEEL FIBRES FOR CONCRETE - DEFINITIONS AND SPECIFICATIONS |
| BS EN 62561-2:2012 | Lightning Protection System Components (LPSC) Requirements for conductors and earth electrodes |
| UNE-EN ISO 6892-3:2015 | Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015) |
| DIN EN 10346:2015-10 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| I.S. EN 61788-19:2014 | SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS |
| PREN 1563 : DRAFT 2015 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications - Part 3: Design method |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| ISO 19203:2018 | Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables — Specifications |
| API 5C6 : 2006 | PIPE WITH WELDED CONNECTORS |
| BS ISO 13583-1:2015 | Centrifugally cast steel and alloy products General testing and tolerances |
| 14/30312182 DC : 0 | BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 16079:2012 | Founding - Compacted (vermicular) graphite cast irons |
| ISO 683-4:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels |
| I.S. EN 60317-27:2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 27: PAPER TAPE COVERED RECTANGULAR COPPER WIRE |
| I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNE-EN 1563:2012 | Founding - Spheroidal graphite cast irons |
| UNI EN 1562 : 2012 | FOUNDING - MALLEABLE CAST IRONS |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| 13/30252127 DC : 0 | BS ISO 13583-1 - CENTRIFUGALLY CAST STEEL AND ALLOY PRODUCTS - PART 1: GENERAL TESTING AND TOLERANCES |
| 13/30280533 DC : 0 | BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
| 15/30312513 DC : 0 | BS ISO 14590 - COLD-REDUCED STEEL SHEET OF HIGH TENSILE STRENGTH AND LOW YIELD POINT WITH IMPROVED FORMABILITY |
| BS EN 16914:2017 | Aluminium and aluminium alloys. Hot-rolled armour plates in weldable aluminium alloy. Technical delivery conditions |
| 17/30351224 DC : 0 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| BS EN ISO 15630-1:2010 | Steel for the reinforcement and prestressing of concrete. Test methods Reinforcing bars, wire rod and wire |
| ONORM EN ISO 7866 : 2014 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012 + COR 1:2014) |
| BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
| 12/30272214 DC : 0 | BS ISO DIS 52921 - STANDARD TERMINOLOGY FOR ADDITIVE MANUFACTURING - COORDINATE SYSTEMS AND TEST METHODOLOGIES |
| I.S. EN 16019:2014 | RAILWAY APPLICATIONS - AUTOMATIC COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHOD |
| I.S. EN 4800-003:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| 13/30271610 DC : 0 | BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
| BS EN ISO 4136:2012 | Destructive tests on welds in metallic materials. Transverse tensile test |
| ISO 4990:2015 | Steel castings — General technical delivery requirements |
| DIN EN ISO 9809-2:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| UNE-EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| BS EN ISO 11118:2015 | Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods |
| I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| UNE-EN 14638-3:2011 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods |
| EN 13605:2013 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| UNI EN ISO 15841 : 2014 | DENTISTRY - WIRES FOR USE IN ORTHODONTICS |
| I.S. EN ISO 17296-3:2016 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014) |
| DIN EN ISO 5755:2013-01 | Sintered metal materials - Specifications (ISO 5755:2012) |
| DIN EN 10209:2013-09 | Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions |
| BS EN 4800-007:2010 | Aerospace series. Titanium and titanium alloys Remelting stock |
| 15/30324988 DC : 0 | BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| BS EN 13001-3-5:2016 | Cranes. General design Limit states and proof of competence of forged hooks |
| 15/30327671 DC : 0 | BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| 16/30292322 DC : 0 | BS ISO 19203 - HOT-DIP GALVANIZED AND ZINC-ALUMINIUM COATED HIGH TENSILE STEEL WIRE FOR BRIDGE CABLES - SPECIFICATIONS |
| BS ISO 11515 : 2013 | GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| BS ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| I.S. EN 4800-007:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| UNE-EN ISO 26203-2:2012 | Metallic materials - Tensile testing at high strain rates - Part 2: Servo-hydraulic and other test systems (ISO 26203-2:2011) |
| 17/30348879 DC : 0 | BS ISO 1083 - SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION |
| EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS ISO 9349:2017 | Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products |
| 16/30258515 DC : 0 | BS EN 13674-4 - RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| BS ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
| ISO 9154:2016 | Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification |
| I.S. EN ISO 9809-1:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| UNI EN 10270-3 : 2011 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| UNI EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| UNI EN ISO 5755 : 2012 | SINTERED METAL MATERIALS - SPECIFICATIONS |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| PREN 10025-1 : DRAFT 2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| PREN 14276-1 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| UNE-EN ISO 18592:2010 | Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009) |
| UNI EN 4800-002 : 2011 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| I.S. EN 16482:2014 | FOUNDING - CONTINUOUS CAST IRON BARS |
| ISO 9349:2017 | Ductile iron pipes, fittings, accessories and their joints — Thermal preinsulated products |
| ISO 6363-1:2012 | Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspection and delivery |
| S.R. CWA 16762:2014 | CEN WORKSHOP AGREEMENT - CEN/WS SERES - ICT STANDARDS IN SUPPORT OF AN EREPORTING FRAMEWORK FOR THE ENGINEERING MATERIALS SECTOR |
| I.S. EN ISO 22068:2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| ISO 4996:2014 | Hot-rolled steel sheet of high yield stress structural quality |
| ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
| UNE-EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| UNE-EN 12493:2014 | LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture |
| I.S. EN ISO 15156-3:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| ONORM EN ISO 15630-1 : 2011 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
| ISO 2408:2017 | Steel wire ropes — Requirements |
| I.S. EN 4800-001:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| UNE-EN 13445-2:2015 | Unfired pressure vessels - Part 2: Materials |
| I.S. EN ISO 4136:2012 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - TRANSVERSE TENSILE TEST (ISO 4136:2012) |
| BS EN 10263-1:2017 | Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions |
| I.S. EN 4800-008:2010 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 008: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| I.S. EN ISO 7866:2012 | GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012) |
| UNI EN ISO 6892-2 : 2011 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
| ISO 16112:2017 | Compacted (vermicular) graphite cast irons — Classification |
| ISO 9328-1:2018 | Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| UNE-EN ISO 4136:2013 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
| ISO 4991:2015 | Steel castings for pressure purposes |
| ISO 15211:2012 | Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel |
| UNI EN 16019 : 2014 | RAILWAY APPLICATIONS - AUTOMATIC COUPLER - PERFORMANCE REQUIREMENTS, SPECIFIC INTERFACE GEOMETRY AND TEST METHOD |
| ISO 6362-2:2014 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties |
| 16/30258472 DC : 0 | BS EN 14811 - RAILWAY APPLICATIONS - TRACK - SPECIAL PURPOSE RAIL - GROOVED AND ASSOCIATED CONSTRUCTION |
| 17/30353548 DC : 0 | BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| BS EN ISO 15630-2:2010 | Steel for the reinforcement and prestressing of concrete. Test methods Welded fabric |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| ISO 13270:2013 | Steel fibres for concrete — Definitions and specifications |
| NF EN ISO 15630-2 : 2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
| 17/30362692 DC : 0 | BS EN 598 - COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS |
| UNE-EN ISO 17296-3:2017 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| PREN 10149-1 : DRAFT 2011 | HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL DELIVERY CONDITIONS |
| I.S. EN 50525-2-11:2011 | ELECTRIC CABLES - LOW VOLTAGE ENERGY CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V (U[0]/U) - PART 2-11: CABLES FOR GENERAL APPLICATIONS - FLEXIBLE CABLES WITH THERMOPLASTIC PVC INSULATION |
| I.S. EN 16079:2011 | FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
| ISO 12633-1:2011 | Hot-finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions |
| ISO 16143-3:2014 | Stainless steels for general purposes — Part 3: Wire |
| BS EN 13674-4 : 2006 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 4: VIGNOLE RAILWAY RAILS FROM 27 KG/M TO, BUT EXCLUDING 46 KG/M |
| ONORM EN 13674-2 : 2012 | RAILWAY APPLICATIONS - TRACK - RAIL - PART 2: SWITCH AND CROSSING RAILS USED IN CONJUNCTION WITH VIGNOLE RAILWAY RAILS 46 KG/M AND ABOVE |
| ISO 630-1:2011 | Structural steels Part 1: General technical delivery conditions for hot-rolled products |
| I.S. EN ISO 18592:2009 | RESISTANCE WELDING - DESTRUCTIVE TESTING OF WELDS - METHOD FOR THE FATIGUE TESTING OF MULTI-SPOT-WELDED SPECIMENS |
| KTA 3206 : 2014(R2017)Berichtigung:2019 | BREAK PRECLUSION VERIFICATIONS FOR PRESSURE-RETAINING COMPONENTS IN NUCLEAR POWER PLANTS |
| DIN EN 1561:2012-01 | Founding - Grey cast irons; German version EN 1561:2011 |
| I.S. EN ISO 15630-1:2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
| ISO 15630-2:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 2: Welded fabric |
| I.S. EN ISO 7500-1:2018 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION -TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCEMEASURING SYSTEM (ISO 7500-1:2018) |
| S.R. CWA 16200:2010 | A GUIDE TO THE DEVELOPMENT AND USE OF STANDARDS COMPLIANT DATA FORMATS FOR ENGINEERING MATERIALS TEST DATA |
| ISO 20805:2017 | Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming |
| ISO 5832-4:2014 | Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy |
| I.S. EN 485-2:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| DIN EN 764-4:2015-03 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| ONORM EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| DIN EN 12952-5:2012-01 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| DIN EN ISO 10451:2010-11 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| DIN EN 13600:2013-09 | Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| BS EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| ISO 6892-3:2015 | Metallic materials Tensile testing Part 3: Method of test at low temperature |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| UNE-EN ISO 7441:2015 | Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015) |
| ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
| UNE-EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| UNE-EN ISO 22674:2016 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
| BS EN 1977:2013 | Copper and copper alloys. Copper drawing stock (wire rod) |
| UNE-EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| UNE-EN 1561:2012 | Founding - Grey cast irons |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS EN 10268 : 2006 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| BS EN 14893:2014 | LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| UNE-EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| BS EN ISO 15841:2014 | Dentistry. Wires for use in orthodontics |
| BS EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Upset (resistance butt) and flash welding |
| BS EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
| BS EN 10305-4:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN ISO 18265:2013 | Metallic materials. Conversion of hardness values |
| BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
| BS EN 10222-1:2017 | Steel forgings for pressure purposes General requirements for open die forgings |
| ISO/ASTM 52921:2013 | Standard terminology for additive manufacturing — Coordinate systems and test methodologies |
| BS EN 10028-1:2017 | Flat products made of steels for pressure purposes General requirements |
| BS EN 13094:2015 | Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction |
| BS EN 10273:2016 | Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
| BS EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions |
| BS EN ISO 7711-2:2011 | Dentistry. Rotary diamond instruments Discs |
| BS EN 13110 : 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| IEC 62047-9:2011 | Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS |
| ONORM EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| EN ISO 5832-3:2016 | Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016) |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10270-3:2011 | Steel wire for mechanical springs - Part 3: Stainless spring steel wire |
| EN 13148:2010 | Copper and copper alloys - Hot-dip tinned strip |
| UNI EN ISO 11439 : 2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES |
| EN 61788-6:2011 | SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
| EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| EN 12450:2012 | Copper and copper alloys - Seamless, round copper capillary tubes |
| EN 10294-2:2012 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| EN 1172:2011 | Copper and copper alloys - Sheet and strip for building purposes |
| EN 10338:2015 | Hot rolled and cold rolled non-coated products of multiphase steels for cold forming - Technical delivery conditions |
| EN 12452:2012 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN 131-2:2010+A2:2017 | Ladders - Part 2: Requirements, testing, marking |
| DIN EN 10294-2:2012-04 | Hollow bars for machining - Technical delivery conditions - Part 2: Stainless steels with specified machinability properties |
| DIN EN 10305-4:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN 14140:2017-01 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| DIN EN 545:2011-09 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| EN 62047-9:2011 | Semiconductor devices - Micro-electromechanical devices - Part 9: Wafer to wafer bonding strength measurement for MEMS |
| EN 13749:2011 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
| DIN EN 14359:2017-09 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| DIN EN ISO 898-2:2012-08 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| EN 61788-19:2014 | Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors |
| EN 50525-2-11:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation |
| DIN EN 14353:2017-09 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 15614-13 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING |
| ONORM EN 16079 : 2012 | FOUNDING - COMPACTED (VERMICULAR) GRAPHITE CAST IRONS |
| ONORM EN 1561 : 2011 | FOUNDING - GREY CAST IRONS |
| UNE-EN 12732:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| CEI EN IEC 60317-82:2021 | Specifications for particular types of winding wires Part 82: Polyesterimide enamelled rectangular copper wire, class 200 |
| UNE-EN 10270-1:2012 | Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire |
| ONORM EN 16482 : 2014 | FOUNDING - CONTINUOUS CAST IRON BARS |
| ONORM EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| ONORM EN 16451 : 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| UNE-EN 14276-1:2007 | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
| SEP 1235 : 2012 | BESTIMMUNG DES ELASTIZITAETSMODULS AN STAHL IM ZUGVERSUCH BEI RAUMTEMPERATUR |
| ISO/TTA 2:1997 | Tensile tests for discontinuously reinforced metal matrix composites at ambient temperatures |
| ISO 2566-2:1984 | Steel Conversion of elongation values Part 2: Austenitic steels |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ASTM E 8M : 2004 | Standard Test Methods for Tension Testing of Metallic Materials [Metric] (Withdrawn 2008) |
| ISO/TR 25679:2005 | Mechanical testing of metals Symbols and definitions in published standards |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ASTM E 111 : 2017 : REDLINE | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| SAC GB/T 228 : 2002 | METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| EN 10291 : 2000 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.