ISO 6722-1:2011
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Road vehicles — 60 V and 600 V single-core cables — Part 1: Dimensions, test methods and requirements for copper conductor cables
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
07-24-2023
Published date
10-06-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 6722-1:2011 specifies the dimensions, test methods, and requirements for single-core 60 V cables intended for use in road vehicle applications where the nominal system voltage is ≤ (60 V d.c. or 25 V a.c.). It also specifies additional test methods and/or requirements for 600 V cables intended for use in road vehicle applications where the nominal system voltage is greater than > (60 V d.c. or 25 V a.c.) to ≤ (600 V d.c. or 600 V a.c.). It also applies to individual cores in multi-core cables.
ISO 6722-1:2011 specifies requirements for copper conductor cables.
| Committee |
ISO/TC 22/SC 32
|
| DevelopmentNote |
Supersedes ISO/DIS 6722-1 & ISO 6722. (10/2011)
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 6722-1:2011 | Identical |
| BS ISO 6722-1:2011 | Identical |
| UNE-ISO 6722-1:2013 | Identical |
| NEN ISO 6722-1 : 1996 | Identical |
| DIN ISO 6722-1:1999-01 | Identical |
| ISO 10924-4:2015 | Road vehicles Circuit breakers Part 4: Medium circuit breakers with tabs (Blade type), Form CB15 |
| SAE J 3117 : 2017 | UN-SHIELDED BALANCED SINGLE TWISTED PAIR ETHERNET CABLE |
| BS ISO 12619-1:2014 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components General requirements and definitions |
| NF ISO 4141-1 : 2000 | ROAD VEHICLES - MULTICORE CONNECTING CABLES - PART 1: TEST METHODS AND REQUIREMENTS FOR BASIC PERFORMANCE SHEATHED CABLES |
| BS 6765-3:1989 | Leisure accommodation vehicles. Caravans Specification for 12 V direct current extra low voltage electrical installations |
| 12/30254989 DC : 0 | BS ISO 12614-1 - ROAD VEHICLES - LIQUEFIED NATURAL GAS (LNG) FUEL SYSTEM COMPONENTS - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS |
| 91/80172 DC : 0 | ROAD VEHICLES - FUEL CONSUMPTION MEASUREMENT EQUIPMENT - CHARACTERISTICS AND TEST METHODS |
| ISO 8820-10:2015 | Road vehicles Fuse-links Part 10: Fuse-links with tabs Type L (high current miniature) |
| 15/30286010 DC : 0 | BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 15/30286835 DC : 0 | BS ISO 14990-2 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 2: PARTICULAR REQUIREMENTS FOR EXTERNALLY-POWERED MACHINES |
| BS ISO 12619-5:2016 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Manual cylinder valve |
| BS ISO 8820-4:2016 | Road vehicles. Fuse-links Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures |
| BS AU 255-1:1994 | Road vehicle unscreened low tension cables Specification for conductor sizes and dimensions for thick walled insulated cables |
| ISO 14572:2011 | Road vehicles — Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables — Test methods and requirements for basic- and high-performance cables |
| 02/103833 DC : DRAFT MAY 2002 | PREN 1648-2 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| BS ISO 14572:2011 | Road vehicles. Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables. Test methods and requirements for basic- and high-performance cables |
| 10/30196613 DC : 0 | BS ISO 14572 - ROAD VEHICLES - ROUND, SHEATHED, 60 V AND 600 V SCREENED AND UNSCREENED SINGLE- OR MULTI-CORE CABLES - TEST METHODS AND REQUIREMENTS FOR BASIC AND HIGH-PERFORMANCE CABLES |
| 12/30197519 DC : 0 | BS ISO 12619-1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS |
| 11/30213830 DC : 0 | BS ISO 6722-2 - ROAD VEHICLES - 60 V AND 600 V SINGLE-CORE CABLES - PART 2: DIMENSIONS TEST METHODS AND REQUIREMENTS FOR ALUMINIUM CONDUCTOR CABLES |
| DIN 72551-6:1996-10 | ROAD VEHICLES - LOW-TENSION CABLES - PART 6: SINGLE-CORE, UNSCREENED, WITH THIN INSULATION WALL - DIMENSIONS, MATERIALS, MARKING |
| BS ISO 10924-5:2016 | Road vehicles. Circuit breakers Circuit breakers with bolt with rated voltage of 450 V |
| BS AU 255-2:1994 | Road vehicle unscreened low tension cables Specification for conductor sizes and dimensions for thin walled insulated cables |
| ISO 12619-5:2016 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 5: Manual cylinder valve |
| 15/30286839 DC : 0 | BS ISO 14990-3 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 3: PARTICULAR REQUIREMENTS FOR SELF-POWERED MACHINES |
| SAE J 2192 : 2016 | RECOMMENDED TESTING METHODS FOR PHYSICAL PROTECTION OF WIRING HARNESSES |
| 14/30268079 DC : 0 | BS ISO 15500-1 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS |
| BS ISO 8820-9:2014 | Road vehicles. Fuse-links Fuse-links with shortened tabs (Type K) |
| 15/30300864 DC : 0 | BS ISO 19689 - MOTORCYCLES AND MOPEDS - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR DIAGNOSTICS - DIAGNOSTIC CONNECTOR AND RELATED ELECTRICAL CIRCUITS, SPECIFICATION AND USE |
| ISO 19689:2016 | Motorcycles and mopeds Communication between vehicle and external equipment for diagnostics Diagnostic connector and related electrical circuits, specification and use |
| 15/30321034 DC : DRAFT MAY 2015 | BS ISO 12619-4 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS - PART 4: CHECK VALVE |
| BS ISO 10924-1:2016 | Road vehicles. Circuit breakers Definitions and general test requirements |
| BS ISO 10924-4:2015 | Road vehicles. Circuit breakers Medium circuit breakers with tabs (Blade type), Form CB15 |
| 17/30346258 DC : 0 | BS ISO 8820-6 - ROAD VEHICLES - FUSE-LINKS - PART 6: SINGLE-BOLT FUSE-LINKS |
| SAE J 1654 : 2016 | UNSHIELDED HIGH VOLTAGE PRIMARY CABLE |
| SAE J 1614 : 2012 | WIRING DISTRIBUTION SYSTEMS FOR OFF-ROAD, SELF-PROPELLED WORK MACHINES |
| ISO 15500-1:2015 | Road vehicles — Compressed natural gas (CNG) fuel system components — Part 1: General requirements and definitions |
| ISO 10924-3:2015 | Road vehicles Circuit breakers Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11 |
| ISO 6722-4:1993 | Road vehicles Unscreened low-tension cables Part 4: Conductor sizes and dimensions for thin-wall insulated cables |
| BS ISO 12619-4:2016 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Check valve |
| ISO 8820-3:2015 | Road vehicles Fuse-links Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature) |
| BS ISO 10924-3:2015 | Road vehicles. Circuit breakers Miniature circuit breakers with tabs (Blade type), Form CB11 |
| BS ISO 8820-3:2015 | Road vehicles. Fuse-links Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature) |
| SAE J 1678 : 2015 | LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE |
| 02/103832 DC : DRAFT MAY 2002 | PREN 1648-1 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| BS ISO 19689:2016 | Motorcycles and mopeds. Communication between vehicle and external equipment for diagnostics. Diagnostic connector and related electrical circuits, specification and use |
| 17/30327507 DC : 0 | BS ISO 20766-1 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS |
| BS ISO 6722-2:2013 | Road vehicles. 60 V and 600 V single-core cables Dimensions, test methods and requirements for aluminium conductor cables |
| IEC 62893-2:2017 | Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2: Test methods |
| SAE USCAR 21 : 2014 | PERFORMANCE SPECIFICATION FOR CABLE-TO-TERMINAL ELECTRICAL CRIMPS |
| ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
| ISO 10924-1:2016 | Road vehicles Circuit breakers Part 1: Definitions and general test requirements |
| SAE USCAR 38 : 2009 | PERFORMANCE SPECIFICATION FOR ULTRASONICALLY WELDED WIRE TERMINATIONS |
| ISO 6722-3:1993 | Road vehicles Unscreened low-tension cables Part 3: Conductor sizes and dimensions for thick-wall insulated cables |
| ISO 6722-2:2013 | Road vehicles — 60 V and 600 V single-core cables — Part 2: Dimensions, test methods and requirements for aluminium conductor cables |
| BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
| ISO 8820-9:2014 | Road vehicles Fuse-links Part 9: Fuse-links with shortened tabs (Type K) |
| SAE J 2840 : 2017 | HIGH VOLTAGE SHIELDED AND JACKETED CABLE |
| 15/30321037 DC : DRAFT MAY 2015 | BS ISO 12619-5 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS - PART 5: MANUAL CYLINDER VALVE |
| 15/30313857 DC : 0 | BS ISO 8820-4 - ROAD VEHICLES - FUSE-LINKS - PART 4: FUSE-LINKS WITH FEMALE CONTACTS (TYPE A) AND BOLT-IN CONTACTS (TYPE B) AND THEIR TEST FIXTURES |
| BS ISO 15500-1:2015 | Road vehicles. Compressed natural gas (CNG) fuel system components General requirements and definitions |
| 14/30291870 DC : 0 | BS ISO 10924-5 - ROAD VEHICLES - CIRCUIT BREAKERS - PART 5: CIRCUIT BREAKERS WITH TABS WITH RATED VOLTAGE OF 450 V |
| ISO 8820-4:2016 | Road vehicles Fuse-links Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures |
| ISO 12619-4:2016 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 4: Check valve |
| SAE J 1939/11 : 2016 | PHYSICAL LAYER, 250 KBPS, TWISTED SHIELDED PAIR |
| ISO 10924-5:2016 | Road vehicles Circuit breakers Part 5: Circuit breakers with bolt with rated voltage of 450 V |
| ISO 12619-1:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 1: General requirements and definitions |
| ISO 16750-5:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads |
| EN 13602:2013 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| IEC 60757:1983 | Code for designation of colours |
| IEC 60811-2-1:1998+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| ISO 6931-1:2016 | Stainless steels for springs Part 1: Wire |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.