ISO 6508:1986
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-21-2019
Superseded by
Language(s)
English, French
Published date
11-13-1986
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SNV ISO 6508 : 1986 | Identical |
| DIN EN 10004-1:1991-05 (Draft) | Similar to |
| DIN 50103-1:1984-03 | Similar to |
| UNE 7424-1:1989 | Identical |
| BS EN 10109-1:1996 | Similar to |
| AS 1815-1991 | Identical |
| PNE 7424-1 | Identical |
| ISO 8442:1988 | Stainless steel and silver-plated table cutlery Requirements |
| BS EN 20898-6:1992 | Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
| 03/108197 DC : DRAFT MAY 2003 | BS EN ISO 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| BS 7568-9:1992 | Press tools Guides for round punches |
| 98/714980 DC : DRAFT SEP 98 | ISO/DIS 15601 - HAMMERS - TECHNICAL SPECIFICATIONS CONCERNING STEEL HAMMER HEADS - TEST PROCEDURES |
| 05/30138267 DC : DRAFT AUG 2005 | EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| BS 7568-28:1993 | Press tools Guide pillars. Type C, pillars with taper lead and bush |
| 08/30176215 DC : DRAFT JAN 2008 | BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
| ISO 6208:1992 | Nickel and nickel alloy plate, sheet and strip |
| XP PREN 3299 : 1997 XP | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| BS 3531-5.1(1990) : 1990 | IMPLANTS FOR OSTEOSYNTHESIS - BONE SCREWS AND AUXILIARY EQUIPMENT - SPECIFICATION FOR KEYS FOR USE WITH SCREWS HAVING HEADS WITH HEXAGON SOCKET |
| 13/30261096 DC : 0 | BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| 98/714984 DC : DRAFT SEP 1998 | ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS |
| 03/101771 DC : 0 | ISO 7331 - SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
| PREN 3043 : 200P2 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| 00/715333 DC : 0 | ISO/CD 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| PREN 2582 : 200P1 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - TECHNICAL SPECIFICATION |
| PREN 3389 : 200P1 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| PREN 2583 : DRAFT 2018 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| PREN 3299 : 200P1 | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| PREN 3685 : 200P1 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION |
| AWS WHB.3.9 : 2007 | WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3 |
| I.S. EN ISO 4957:2000 | TOOL STEELS |
| ISO/TR 15461:1997 | Steel forgings Testing frequency, sampling conditions and test methods for mechanical tests |
| BS 2000-49(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| DIN EN ISO 8442-2:1998-03 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - CUTLERY AND TABLE HOLLOWARE - PART 2: REQUIREMENTS FOR STAINLESS STEEL AND SILVER-PLATED CUTLERY (ISO 8442-2:1997) |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| DIN EN 586-2:1994-11 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 2: MECHANICAL PROPERTIES AND ADDITIONAL PROPERTY REQUIREMENTS |
| BS EN 586-2:1994 | Aluminium and aluminium alloys. Forgings Mechanical properties and additional property requirements |
| 11/30253145 DC : 0 | BS EN 62271-202 ED2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION |
| ISO 8442-4:1997 | Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 4: Requirements for gold plated cutlery |
| DIN EN 20898-2:1994-02 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH COARSE PITCH THREAD AND SPECIFIED PROOF LOAD VALUES |
| DIN EN ISO 8442-2:2017-09 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - CUTLERY AND TABLE HOLLOWARE - PART 2: REQUIREMENTS FOR STAINLESS STEEL AND SILVER-PLATED CUTLERY (ISO 8442-2:1997) |
| ISO 13411:1997 | Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification |
| BS 7568-24:1992 | Press tools Guide bushes. Form G, gliding bushes, stepped, type 1 |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| BS 7568-20:1992 | Press tools Guide bushes. Form C, gliding bushes, headed, type 1 |
| SAE J 1453/1 : 2012 | SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
| BS 7568-29:1993 | Press tools Guide pillars. Type D, end-locking pillars with flange |
| BS ISO 9181:2007 | Tools for pressing. Round punches with 60° conical head and reduced shank |
| 01/714274 DC : 0 | ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| CSA ISO 8319-1 : 0 | ORTHOPAEDIC INSTRUMENTS - DRIVE CONNECTIONS - PART 1: KEYS FOR USE WITH SCREWS WITH HEXAGON SOCKET HEADS |
| ISO 2853:1993 | Stainless steel threaded couplings for the food industry |
| 12/30266965 DC : 0 | BS EN ISO 14920 - THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS |
| 03/110542 DC : DRAFT JUNE 2003 | ISO 16936-1 - GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING - PART 1: TEST AND CLASSIFICATION BY REPETITIVE BALL DROP |
| 10/30199664 DC : 0 | BS ISO 4254-13 - AGRICULTURAL MACHINERY - SAFETY - PART 13: LARGE ROTARY MOWERS |
| 12/30242601 DC : 0 | BS ISO 500-3 - AGRICULTURAL TRACTORS - REAR-MOUNTED POWER TAKE-OFF TYPES 1, 2 AND 3 - PART 3: MAIN PTO DIMENSIONS AND SPLINE DIMENSIONS, LOCATION OF PTO |
| BS A 343:1999 | Nuts, plain or slotted (castellated). Test methods |
| BS 7568-23:1992 | Press tools Guide bushes. Form F, ball cage bushes, flanged, type 1 |
| NF EN 2583 : 1997 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| 01/714323 DC : DRAFT OCT 2001 | EN ISO 15156-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW ALLOY STEELS |
| BS 7568-8:1992 | Press tools Round matrixes |
| BS 7568-22:1992 | Press tools Guide bushes. Form E, gliding bushes, flanged, type 1 |
| XP PREN 4111 : 1998 XP | AEROSPACE SERIES - WRENCHES, SPLINED, SOCKETS FOR PIPE FITTINGS - TECHNICAL SPECIFICATION |
| XP PREN 3833 : 1998 XP | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| BS 7568-19:1992 | Press tools Guide bushes. Form B, ball cage bushes, plain, type 1 |
| 03/306830 DC : DRAFT APR 2003 | ISO 18669-2 - INTERNAL COMBUSTION ENGINES - PISTONS PINS - PART 2: INSPECTION MEASURING PRINCIPLES |
| BS 7568-27:1993 | Press tools Guide pillars. Type B, end-locking pillars |
| BS 7568-26:1993 | Press tools Guide pillars. Type A, straight pillars |
| 00/704779 DC : DRAFT FEB 2000 | ISO/DIS 500 - AGRICULTURAL TRACTORS - REAR-MOUNTED POWER TAKE-OFFS - TYPES 1,2,3 AND 4 |
| BS 2000-450(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - TEST METHOD |
| 07/30144593 DC : 0 | BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
| 04/30031170 DC : DRAFT JUN 2004 | BS EN ISO 9173-1 - DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| PREN 4111 : 200P2 | AEROSPACE SERIES - WRENCHES, SPLINED, SOCKETS FOR PIPE FITTINGS - TECHNICAL SPECIFICATION |
| CSA ISO 8319-2 : 0 | ORTHOPAEDIC INSTRUMENTS - DRIVE CONNECTIONS - PART 2: SCREWDRIVERS FOR SINGLE SLOT HEAD SCREWS, SCREWS WITH CRUCIATE SLOT AND CROSS-RECESSED HEAD SCREWS |
| SAE J 1502 : 2013 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - HYDRAULIC COUPLINGS - DIAGNOSTIC |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ISO 4954:1993 | Steels for cold heading and cold extruding |
| BS EN ISO 9974-1:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports |
| BS EN 356:2000 | Glass in building. Security glazing. Testing and classification of resistance against manual attack |
| BS EN ISO 8442-6:2001 | Materials and articles in contact with foodstuffs. Cutlery and table holloware Lightly silver plated table holloware protected by laquer |
| NBR IEC 60068-2-75 : 2007 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST EH: HAMMER TEST |
| 01/714275 DC : 0 | ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| BS 7568-6:1992 | Press tools Round punches with cylindrical head and straight shank |
| 00/708279 DC : DRAFT APR 2000 | ISO/DIS 500 - AGRICULTURAL TRACTORS - REAR MOUNTED POWER TAKE-OFFS - TYPES 1, 2, 3 AND 4 |
| 11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| I.S. EN ISO 898-6:1996 | MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| NF EN ISO 19879 : 2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| BS 5600-3.11.1:1991 | Powder metallurgical materials and products. Methods of testing sintered metal material and products, excluding hard metals. Determination of apparent hardness. Materials of essentially uniform section hardness |
| BS 7568-32:1993 | Press tools Specification for guide bushes: form F, ball cage bushes, flanged, type 2 |
| 05/30135263 DC : DRAFT JUN 2005 | ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
| ISO 10914:1996 | Assembly tools for screws and nuts — Sockets and wrenches for spline drive |
| PREN 3388 : 200P1 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| ISO 9140:1998 | Aerospace Nuts, plain or slotted (castellated) Test methods |
| EN 2583:1997 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650°C - Technical specification |
| ISO 6207:1992 | Seamless nickel and nickel alloy tube |
| BS 7564-8:1992 | Tools for moulding Angle pins. Basic dimensions |
| BS 7568-31:1993 | Press tools Specification for guide bushes: form E, gliding bushes, flanged, type 2 |
| ISO 716:1986 | Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
| I.S. EN 2583:1997 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| DIN EN 2583:1997-03 | AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY, NI-PH 2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION |
| BS EN ISO 9974-3:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with metal-to-metal sealing (type B) |
| I.S. EN ISO 8442-1:1998 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - CUTLERY AND TABLE HOLLOWARE - PART 1: REQUIREMENTS FOR CUTLERY FOR THE PREPARATION OF FOOD |
| CSA B51S1 : 2005 | SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| I.S. EN ISO 8442-4:1998 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - CUTLERY AND TABLE HOLLOWARE - PART 4: REQUIREMENTS FOR GOLD-PLATED CUTLERY |
| 03/110806 DC : DRAFT JUNE 2003 | BS ISO 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| 12/30233843 DC : DRAFT JULY 2012 | BS ISO 5718 - HARVESTING EQUIPMENT - BLADES FOR AGRICULTURAL ROTARY MOWERS - REQUIREMENTS |
| BS 5341-6.3:1992 | Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications Material specifications |
| ISO 7741:1986 | Instruments for surgery — Scissors and shears — General requirements and test methods |
| 03/301367 DC : DRAFT JAN 2003 | ISO 9657 - PLIERS AND NIPPERS FOR ELECTRONICS - GENERAL TECHNICAL REQUIREMENTS |
| OIML G 6 : 1991 | THE UNIFICATION OF HARDNESS MEASUREMENT |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| 02/709742 DC : DRAFT AUG 2002 | ISO/DIS 500-3 - AGRICULTURAL TRACTORS - REAR-MOUNTED POWER TAKE-OFF TYPES 1, 2 AND 3 - PART 3: MAIN PTO DIMENSIONS AND SPLINE DIMENSIONS, LOCATION OF PTO |
| BS ISO 12156-1:1997 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| BS 7568-18:1992 | Press tools Guide bushes. Gliding bushes, plain, type 1 |
| 08/30141132 DC : DRAFT APR 2008 | BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ISO 674:1988 | Metallic materials Hardness test Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
| I.S. EN ISO 14918:1999 | THERMAL SPRAYING - APPROVAL TESTING OF THERMAL SPRAYERS |
| BS EN 2583:1997 | Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1275 MPa (at ambient temperature)/650°C. Technical specification |
| ISO 4739:1985 | Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing |
| ISO 4957:1999 | Tool steels |
| BS EN 20898-2:1994 | Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
| ISO 8442-6:2000 | Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 6: Lightly silver-plated table holloware protected by lacquer |
| ISO 9974-3:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
| ISO 8442-7:2000 | Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys |
| BS EN ISO 8442-4:1998 | Materials and articles in contact with foodstuffs. Cutlery and table holloware Requirements for gold-plated cutlery |
| ISO 4498-1:1990 | Sintered metal materials, excluding hardmetals Determination of apparent hardness Part 1: Materials of essentially uniform section hardness |
| BS EN ISO 8442-1:1998 | Materials and articles in contact with foodstuffs. Cutlery and table holloware Requirements for cutlery for the preparation of food |
| 03/110544 DC : DRAFT JUNE 2003 | ISO 16936-3 - GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING. TEST AND CLASSIFICATION - PART 3: TEST AND CLASSIFICATION BY MANUAL ATTACK |
| ISO 898-6:1994 | Mechanical properties of fasteners Part 6: Nuts with specified proof load values Fine pitch thread |
| ISO 9974-2:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 8442-1:1997 | Materials and articles in contact with foodstuffs Cutlery and table holloware Part 1: Requirements for cutlery for the preparation of food |
| EN 20898-6 : 1992 | MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| EN 356:1999 | Glass in building - Security glazing - Testing and classification of resistance against manual attack |
| EN 24498-1 : 1993 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS - MATERIALS OF ESSENTIALLY UNIFORM SECTION HARDNESS |
| EN ISO 8442-6:2000 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000) |
| EN ISO 9974-2:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996) |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| EN ISO 8442-7:2000 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Specification for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000) |
| EN ISO 898-6:1995 | Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread (ISO 898-6:1994) |
| EN ISO 9974-3:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996) |
| NF ISO 10914 : 2008 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - SOCKETS AND WRENCHES FOR SPLINE DRIVE |
| 02/711555 DC : 0 | BS ISO 2415 - FORGED SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES |
| BS 7568-21:1992 | Press tools Guide bushes. Form D, ball cage bushes, headed, type 1 |
| DIN ISO 13411:1996-12 (Draft) | AEROSPACE - AIRFRAME ROLLING BEARINGS - NEEDLE ROLLER, NEEDLE TRACK ROLLER AND CYLINDRICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
| 03/301368 DC : DRAFT JAN 2003 | ISO 9656 - PLIERS AND NIPPERS FOR ELECTRONICS - TEST METHODS |
| 01/714273 DC : 0 | ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| 13/30280801 DC : 0 | BS EN 60068-2-75 - ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS |
| 04/30008013 DC : 0 | BS ISO 3266 - EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES |
| BS 7568-30:1993 | Press tools Specification for guide bushes: form B, ball cage bushes, plain, type 2 |
| BS EN ISO 8442-2:1998 | Materials and articles in contact with foodstuffs. Cutlery and table holloware Requirements for stainless steel and silver-plated cutlery |
| 03/301362 DC : DRAFT JAN 2003 | ISO 5743 - PLIERS AND NIPPERS - GENERAL TECHNICAL REQUIREMENTS |
| BS ISO 10914:1996 | Assembly tools for screws and nuts. Sockets and wrenches for spline drive |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 03/110543 DC : DRAFT JUNE 2003 | ISO 16939-2 - GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING - PART 2: TEST AND CLASSIFICATION BY REPETITIVE IMPACT OF A HAMMER AND AXE AT ROOM TEMPERATURE |
| 05/30135261 DC : DRAFT JUN 2005 | ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| ISO 7151:1988 | Surgical instruments — Non-cutting, articulated instruments — General requirements and test methods |
| BS EN ISO 14918:1998 | Thermal spraying. Approval testing of thermal sprayers |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| EN ISO 4957:1999 | Tool steels (ISO 4957:1999) |
| EN ISO 14918:1998 | Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998) |
| ISO 8442-2:1997 | Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 2: Requirements for stainless steel and silver-plated cutlery |
| BS EN ISO 8442-7:2001 | Materials and articles in contact with foodstuffs. Cutlery and table holloware Requirements for table cutlery made of silver, other precious metals and their alloys |
| BS EN ISO 9974-2:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E) |
| BS EN ISO 4957:2000 | Tool steels |
| DIN EN ISO 898-6:1996-02 | MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| ISO 716:1986 | Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
| ISO 4498-1:1990 | Sintered metal materials, excluding hardmetals Determination of apparent hardness Part 1: Materials of essentially uniform section hardness |
| ISO 3738-1:1982 | Hardmetals — Rockwell hardness test (scale A) — Part 1: Test method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.