ISO 6336-2:2006
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
11-28-2019
Superseded by
Published date
09-04-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 6336-2:2006 specifies the fundamental formulas for use in the determination of the surface load capacity of cylindrical gears with involute external or internal teeth. It includes formulas for all influences on surface durability for which quantitative assessments can be made. It applies primarily to oil-lubricated transmissions, but can also be used to obtain approximate values for (slow-running) grease-lubricated transmissions, as long as sufficient lubricant is present in the mesh at all times.
| DevelopmentNote |
Supersedes ISO/DIS 6336-2 (09/2006)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS ISO 6336-2:2006 | Identical |
| NEN ISO 6336-2 : 2006 C1 2008 | Identical |
| NF ISO 6336-2 : 2006 | Identical |
| 11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
| 04/102158 DC : 0 | BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES |
| BS ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Calculation of service life under variable load |
| BS ISO TR 10495:1997 | Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336 |
| BS ISO 10972-1:1998 | Cranes. Requirements for mechanisms General |
| 03/314804 DC : DRAFT SEP 2003 | BS ISO 6336-3 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH |
| 04/30126840 DC : DRAFT DEC 2004 | BS ISO 6336-6 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD |
| 11/30229145 DC : 0 | BS ISO 10300-2 - CALCULATION OF LOAD CAPACITY OF BEVEL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING) |
| CSA B354.5 : 2007 : R2016 | MAST-CLIMBING WORK PLATFORMS |
| BS ISO 9084:2000 | Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements |
| UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
| AGMA ISO 6336-6 : A2008(R2014) | CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD |
| B354.12-17 | Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs) |
| ISO/TR 13593:1999 | Enclosed gear drives for industrial applications |
| DIN EN 12158-1:2011-06 | Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010) |
| DIN EN 1495:2009-12 | Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009) |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| 11/30235014 DC : 0 | BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| UNI EN 12158-1 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| NF EN 12158-1 : 2000 + A1 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| AGMA 938 : A | SHOT PEENING OF GEARS |
| ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load |
| BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
| BS ISO 9083:2001 | Calculation of load capacity of spur and helical gears. Application to marine gears |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN 81-43:2009 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Lifts for cranes |
| 99/702257 DC : DRAFT JAN 1999 | PREN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS AND SERVICE LIFTS - PART 7: RACK AND PINION LIFTS |
| 02/710617 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| PD ISO/TR 15144-2:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Examples of calculation for micropitting |
| 03/301396 DC : 0 | EN 14607-3 - SPACE ENGINEERING - MECHANICAL - PART 3: MECHANISMS |
| ISO/TS 6336-20:2017 | Calculation of load capacity of spur and helical gears Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Flash temperature method |
| NF ISO/TR 10495 : 98 FD | CYLINDRICAL GEARS - CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD - CONDITIONS FOR CYLINDRICAL GEARS IN ACCORDANCE WITH ISO 6336 |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| ISO/TR 10495:1997 | Cylindrical gears Calculation of service life under variable loads Conditions for cylindrical gears according to ISO 6336 |
| I.S. EN 13135:2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| B354.9-17 | Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs) |
| UNI EN 81-43 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 12159:2013-03 | Builders hoists for persons and materials with vertically guided cages |
| BS EN 15095 : 2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| I.S. EN 12158-1:2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| I.S. EN 12158-2:2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| I.S. EN 15095:2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 61400-1:2005/A1:2010 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| I.S. EN 1495:1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
| EN 13135:2013+A1:2018 | Cranes - Safety - Design - Requirements for equipment |
| ISO 9084:2000 | Calculation of load capacity of spur and helical gears Application to high speed gears and gears of similar requirements |
| I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
| DIN EN 81-43:2010-05 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| 15/30269176 DC : 0 | BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
| BS ISO 10300-2:2014 | Calculation of load capacity of bevel gears Calculation of surface durability (pitting) |
| BS EN 13135 : 2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| 14/30295634 DC : 0 | BS EN 16719 - TRANSPORT PLATFORMS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| BS ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Flash temperature method |
| AGMA 6123 : REV A : 1988 | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| DIN 3990-2:1987-12 | CALCULATION OF LOAD CAPACITY CYLINDRICAL GEARS; CALCULATION OF PITTING RESISTANCE |
| ISO 9083:2001 | Calculation of load capacity of spur and helical gears — Application to marine gears |
| CSA C61400-1 : 2014 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| ISO/TR 15144-2:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Part 2: Examples of calculation for micropitting |
| UNE-EN 13135:2013 | Cranes - Safety - Design - Requirements for equipment |
| DIN EN 12158-2:2011-04 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010) |
| BS EN 1495 : 1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| EN 15095:2007+A1:2008 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
| UNI EN 1495 : 2009 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNI EN 15095 : 2009 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
| UNI EN 12158-2 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| AGMA 6123 : REV A : 2006 | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| ISO 16369:2007 | Elevating work platforms Mast-climbing work platforms |
| BS ISO 9085:2002 | Calculation of load capacity of spur and helical gears. Application for industrial gears |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| 09/30183113 DC : 0 | BS EN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 7: RACK AND PINION LIFTS |
| I.S. EN 61400-1:2005 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| BS ISO/TR 10064-4:1998 | Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking |
| CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 | MAST-CLIMBING WORK PLATFORMS |
| BS ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Basic principles, introduction and general influence factors |
| CSA B354.5:2007 | MAST-CLIMBING WORK PLATFORMS |
| AGMA 6123 : REV A : 1988 : R2000 | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
| DIN EN 13135:2013-05 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| OVE/ONORM EN 61400-1 : 2011 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| ISO 9085:2002 | Calculation of load capacity of spur and helical gears — Application for industrial gears |
| BS EN 12158-2 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| BS EN 14985:2012 | Cranes. Slewing jib cranes |
| UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| IEC 61400-1:2005+AMD1:2010 CSV | Wind turbines - Part 1: Design requirements |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| UNE-EN 12158-1:2001 | Builders hoists for goods. Part 1: Hoists with accessible platforms. |
| UNE-EN 12158-2:2001 | Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices. |
| DIN EN 15095:2009-06 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 81-43:2009 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
| EN 12158-2:2000+A1:2010 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
| UNE-EN 61400-1:2006 | Wind turbines - Part 1: Design requirements |
| BS EN 61400-1 : 2005 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
| 04/30126837 DC : DRAFT DEC 2004 | BS ISO 6336-1 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 1: BASIC PRINCIPLES, INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| DIN 3990-1:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS - INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| PD ISO/TR 15144-1:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Introduction and basic principles |
| I.S. EN 81-43:2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| 08/30181434 DC : DRAFT DEC 2008 | BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| BS ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Strength and quality of materials |
| BS ISO 81400-4:2005 | Wind turbines Design and specification of gearboxes |
| ISO 10300-2:2014 | Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting) |
| EN 16719:2018 | Transport platforms |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| ISO 81400-4:2005 | Wind turbines Part 4: Design and specification of gearboxes |
| ISO/TR 15144-1:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Part 1: Introduction and basic principles |
| ISO/TR 10064-4:1998 | Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| BS ISO 13691 : 2001 AMD 14307 | PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
| BS EN 12158-1 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| EN 12158-1:2000+A1:2010 | Builders' hoists for goods - Part 1: Hoists with accessible platforms |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 701:1998 | International gear notation Symbols for geometrical data |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| ISO 53:1998 | Cylindrical gears for general and heavy engineering Standard basic rack tooth profile |
| ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering — Modules |
| AGMA 2001 : D | FUNDAMENTAL RATING FACTORS AND CALCULATION METHODS FOR INVOLUTE SPUR AND HELICAL GEAR TEETH |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.