ISO 6336-1:2006
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
11-29-2019
Superseded by
Published date
09-04-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 6336-1:2006 presents the basic principles of, an introduction to, and the general influence factors for, the calculation of the load capacity of spur and helical gears. Together with ISO 6336-2, ISO 6336-3, ISO 6336-5 and ISO 6336-6, it provides a method by which different gear designs can be compared. It is not intended to assure the performance of assembled drive gear systems. It is not intended for use by the general engineering public. Instead, it is intended for use by the experienced gear designer who is capable of selecting reasonable values for the factors in these formulae based on knowledge of similar designs and awareness of the effects of the items discussed.
The formulae in ISO 6336 are intended to establish a uniformly acceptable method for calculating the pitting resistance and bending strength capacity of cylindrical gears with straight or helical involute teeth.
| DevelopmentNote |
Supersedes ISO/DIS 6336-1 (09/2006)
|
| DocumentType |
Standard
|
| Pages |
111
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 6336-1 : 2008 | Identical |
| BS ISO 6336-1:2006 | Identical |
| NF ISO 6336-1 : 2006 | Identical |
| 04/19993045 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| ISO/TS 6336-21:2017 | Calculation of load capacity of spur and helical gears Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Integral temperature method |
| BS EN 81-43:2009 | Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Lifts for cranes |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| 04/102158 DC : 0 | BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES |
| 15/30269176 DC : 0 | BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
| BS ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Calculation of service life under variable load |
| BS ISO TR 10495:1997 | Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336 |
| DIN EN 81-43:2010-05 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| 04/30126840 DC : DRAFT DEC 2004 | BS ISO 6336-6 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD |
| BS ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Calculation of tooth bending strength |
| CSA B354.5 : 2007 : R2016 | MAST-CLIMBING WORK PLATFORMS |
| BS ISO 9084:2000 | Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements |
| ISO/TS 6336-20:2017 | Calculation of load capacity of spur and helical gears Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Flash temperature method |
| BS ISO/TR 13989-2:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Integral temperature method |
| UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
| AGMA ISO 6336-6 : A2008(R2014) | CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 6: CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD |
| B354.12-17 | Design, calculations, safety requirements, and test methods for mast climbing transport platforms (MCTPs) |
| DIN EN 12158-1:2011-06 | Builders' hoists for goods - Part 1: Hoists with accessible platforms (includes Amendment A1:2010) |
| DIN EN 1495:2009-12 | Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009) |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| 11/30235014 DC : 0 | BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
| UNI EN 12158-1 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| NF EN 12158-1 : 2000 + A1 2010 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| AGMA 938 : A | SHOT PEENING OF GEARS |
| ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load |
| BS ISO 9083:2001 | Calculation of load capacity of spur and helical gears. Application to marine gears |
| 03/314803 DC : DRAFT SEP 2003 | ISO 6336-2 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING) |
| 99/702257 DC : DRAFT JAN 1999 | PREN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS AND SERVICE LIFTS - PART 7: RACK AND PINION LIFTS |
| BS ISO 10972-1:1998 | Cranes. Requirements for mechanisms General |
| PD ISO/TR 15144-2:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Examples of calculation for micropitting |
| 03/301396 DC : 0 | EN 14607-3 - SPACE ENGINEERING - MECHANICAL - PART 3: MECHANISMS |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| NF ISO/TR 10495 : 98 FD | CYLINDRICAL GEARS - CALCULATION OF SERVICE LIFE UNDER VARIABLE LOAD - CONDITIONS FOR CYLINDRICAL GEARS IN ACCORDANCE WITH ISO 6336 |
| BS EN 13135 : 2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| EN 13135:2013+A1:2018 | Cranes - Safety - Design - Requirements for equipment |
| ISO/TR 10495:1997 | Cylindrical gears Calculation of service life under variable loads Conditions for cylindrical gears according to ISO 6336 |
| I.S. EN 13135:2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| B354.9-17 | Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs) |
| UNI EN 81-43 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 12159:2013-03 | Builders hoists for persons and materials with vertically guided cages |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| BS EN 15095 : 2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| I.S. EN 12158-1:2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| I.S. EN 12158-2:2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| I.S. EN 15095:2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| I.S. EN 1495:1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| 07/30161753 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
| 04/30122476 DC : 0 | EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| 02/710617 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| 14/30295634 DC : 0 | BS EN 16719 - TRANSPORT PLATFORMS |
| 11/30229148 DC : 0 | BS ISO 10300-1 - CALCULATION OF LOAD CAPACITY OF BEVEL GEARS - PART 1: INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| BS ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Flash temperature method |
| ISO 9083:2001 | Calculation of load capacity of spur and helical gears — Application to marine gears |
| AGMA 6123 : REV A : 1988 | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| ISO 16369:2007 | Elevating work platforms Mast-climbing work platforms |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
| BS ISO 10300-1:2014 | Calculation of load capacity of bevel gears Introduction and general influence factors |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| ISO/TR 15144-2:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Part 2: Examples of calculation for micropitting |
| I.S. EN 16719:2018 | TRANSPORT PLATFORMS |
| ONORM EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 13135:2013 | Cranes - Safety - Design - Requirements for equipment |
| ISO 9084:2000 | Calculation of load capacity of spur and helical gears Application to high speed gears and gears of similar requirements |
| ISO 10300-1:2014 | Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| DIN EN 12158-2:2011-04 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices (includes Amendment A1:2010) |
| BS EN 1495 : 1998 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNI EN 1495 : 2009 | LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS |
| UNI EN 15095 : 2009 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 12158-2 : 2010 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| BS ISO 9085:2002 | Calculation of load capacity of spur and helical gears. Application for industrial gears |
| BS ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Calculation of surface durability (pitting) |
| 09/30183113 DC : 0 | BS EN 81-7 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 7: RACK AND PINION LIFTS |
| 08/30181434 DC : DRAFT DEC 2008 | BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| AGMA 6123 : REV A : 2006 | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| 03/314804 DC : DRAFT SEP 2003 | BS ISO 6336-3 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH |
| 04/30126179 DC : DRAFT DEC 2004 | EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| I.S. EN 81-43:2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011 | MAST-CLIMBING WORK PLATFORMS |
| AGMA 6123 : REV A : 1988 : R2000 | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| ISO 81400-4:2005 | Wind turbines Part 4: Design and specification of gearboxes |
| DIN EN 13135:2013-05 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| ISO/TR 13989-2:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method |
| I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| ISO 9085:2002 | Calculation of load capacity of spur and helical gears — Application for industrial gears |
| BS EN 12158-2 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 2: INCLINED HOISTS WITH NON-ACCESSIBLE LOAD CARRYING DEVICES |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| BS EN 14985:2012 | Cranes. Slewing jib cranes |
| UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 12158-1:2001 | Builders hoists for goods. Part 1: Hoists with accessible platforms. |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| UNE-EN 12158-2:2001 | Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices. |
| DIN EN 15095:2009-06 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 12158-1:2000+A1:2010 | Builders' hoists for goods - Part 1: Hoists with accessible platforms |
| EN 81-43:2009 | Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
| EN 12158-2:2000+A1:2010 | Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
| EN 15095:2007+A1:2008 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
| ISO/TR 13593:1999 | Enclosed gear drives for industrial applications |
| PD ISO/TS 6336-21:2017 | Calculation of load capacity of spur and helical gears Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method |
| BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
| DIN 3990-1:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS - INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| PD ISO/TR 15144-1:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Introduction and basic principles |
| 11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
| BS ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Strength and quality of materials |
| BS ISO 81400-4:2005 | Wind turbines Design and specification of gearboxes |
| CSA B354.5:2007 | MAST-CLIMBING WORK PLATFORMS |
| ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method |
| EN 16719:2018 | Transport platforms |
| ISO/TR 15144-1:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Part 1: Introduction and basic principles |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| BS ISO 13691 : 2001 AMD 14307 | PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
| BS EN 12158-1 : 2000 | BUILDERS' HOISTS FOR GOODS - PART 1: HOISTS WITH ACCESSIBLE PLATFORMS |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| ISO 701:1998 | International gear notation Symbols for geometrical data |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| ISO 53:1998 | Cylindrical gears for general and heavy engineering Standard basic rack tooth profile |
| ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load |
| ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering — Modules |
| ISO/TR 10064-1:2017 | Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
| AGMA 2001 : D | FUNDAMENTAL RATING FACTORS AND CALCULATION METHODS FOR INVOLUTE SPUR AND HELICAL GEAR TEETH |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.