ISO 6145-10:2002
Current
Current
The latest, up-to-date edition.
Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 10: Permeation method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
02-07-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This part of ISO 6145 specifies a dynamic method using permeation membranes for the preparation of calibration
gas mixtures containing component mole fractions ranging from 10−9 and 10−6. A relative expanded uncertainty of
2,5 % of the component mole fraction can be achieved using this method. In the mole fraction range considered, it
is difficult to maintain some gas mixtures, for example in cylinders, in a stable state. It is therefore desirable to
prepare the calibration gas immediately before use, and to transfer it by the shortest possible path to the place
where it is to be used. This technique has been successfully applied in generating low content calibration gas
mixtures of, for example, sulfur dioxide (SO2), nitrogen dioxide (NO2) and benzene (C6H6) in air.
If the carrier gas flow is measured as a gas mass-flow, the preparation of calibration gas mixtures using permeation
tubes is a dynamic-gravimetric method which gives contents in mole fractions.
| DevelopmentNote |
Supersedes ISO/FDIS 6145-10 (02/2002) Supersedes ISO 6349 (04/2002)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 6145-10 : 2008 | Identical |
| NBN EN ISO 6145-10 : 2009 | Identical |
| NEN EN ISO 6145-10 : 2008 | Identical |
| UNE-EN ISO 6145-10:2008 | Identical |
| NEN ISO 6145-10 : 2002 | Identical |
| NS EN ISO 6145-10 : 1ED 2008 | Identical |
| I.S. EN ISO 6145-10:2008 | Identical |
| PN EN ISO 6145-10 : 2008 | Identical |
| SN EN ISO 6145-10:2008 | Identical |
| UNI EN ISO 6145-10 : 2009 | Identical |
| BIS IS 16249-10 : 2014 | Identical |
| BS ISO 6145-10 : 2002 | Identical |
| BS EN ISO 6145-10:2008 | Identical |
| UNE 77243-10:2004 | Identical |
| EN ISO 6145-10:2008 | Identical |
| DIN EN ISO 6145-10:2008-11 | Identical |
| 13/30267536 DC : 0 | BS EN 60079-29-1 ED 2.0 - EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES |
| 10/30210750 DC : 0 | BS EN 14212 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| DIN EN ISO 6145-1:2008-11 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| BS EN 13528-3:2003 | Ambient air quality. Diffusive samplers for the determination of concentrations of gases and vapours. Requirements and test methods Guide to selection, use and maintenance |
| I.S. EN 838:2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| EN 1076:2009 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| EN 13528-3:2003 | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance |
| UNI EN ISO 6145-1 : 2009 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| EN 60079-29-1:2016 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| 01/121743 DC : DRAFT APRIL 2001 | BS ISO 19739 - NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| 14/30254778 DC : 0 | BS EN ISO 17621 - WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 19739:2005 | Natural gas. Determination of sulfur compounds using gas chromatography |
| UNE-EN 60079-29-1:2017 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| PREN 14662-3 : DRAFT 2013 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| I.S. EN ISO 19739:2006 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| DIN EN 1076:2010-04 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
| DIN EN 14211:2012-11 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| DIN EN 14662-3:2016-02 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| UNE-EN 14662-3:2016 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| BS EN 14211:2012 | Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| I.S. EN 14211:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| I.S. EN 14212:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| I.S. EN 14042:2003 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
| I.S. EN 14662-3:2015 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| UNI EN 838 : 2010 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING DIFFUSIVE SAMPLERS - REQUIREMENTS AND TEST METHODS |
| VDI 2100 Blatt 3:2011-10 | Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Active sampling by accumulation on adsorbents - Thermal desorption |
| 17/30321967 DC : 0 | BS ISO/IEC 20435-1 - WORKPLACE ATMOSPHERES - PART 1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR TOXIC GASES |
| ISO/TS 14167:2003 | Gas analysis General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
| PREN 14212 : DRAFT 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| UNE-EN ISO 17621:2016 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| 04/30112677 DC : 0 | IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 17621:2015-12 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| 03/306307 DC : DRAFT JUNE 2003 | EN 14626 - AMBIENT AIR QUALITY - MEASUREMENT METHOD FOR THE DETERMINATION OF CARBON MONOXIDE IN AMBIENT AIR BY MEANS OF THE NON-DISPERSIVE INFRARED METHOD |
| BS EN 60079-29-1:2007 | Explosive atmospheres Gas detectors. Performance requirements of detectors for flammable gases |
| I.S. EN ISO 17621:2015 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| BS EN ISO 6145-1:2008 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Methods of calibration |
| DIN EN 14212:2012-11 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| BS EN 1076:2009 | Workplace exposure. Procedures for measuring gases and vapours using pumped samplers. Requirements and test methods |
| ISO 6145-1:2003 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration |
| EN 14662-3:2015 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| UNI EN ISO 19739 : 2007 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| UNI EN 14211 : 2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| 17/30345272 DC : 0 | BS ISO 14167 - GAS ANALYSIS - GENERAL QUALITY ASPECTS AND METROLOGICAL TRACEABILITY OF CALIBRATION GAS MIXTURES |
| 13/30272419 DC : 0 | BS EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| DIN EN ISO 19739:2009-08 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| BS EN ISO 17621:2015 | Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods |
| BS ISO 19739 : 2004 AMD 16788 | NATURAL GAS - DETERMINATION OF SULFUR COMPOUNDS USING GAS CHROMATOGRAPHY |
| DIN EN 838:2010-05 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| BS EN 14662-5:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by solvent desorption and gas chromatography |
| BS EN 14042:2003 | Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| BS EN 14662-3:2015 | Ambient air. Standard method for the measurement of benzene concentrations Automated pumped sampling with in situ gas chromatography |
| ISO 17621:2015 | Workplace atmospheres Short term detector tube measurement systems Requirements and test methods |
| UNE-EN 14211:2013 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| BS EN 838:2010 | Workplace exposure. Procedures for measuring gases and vapours using diffusive samplers. Requirements and test methods |
| UNE-EN 14212:2013 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| I.S. EN 1076:2009 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING GASES AND VAPOURS USING PUMPED SAMPLERS - REQUIREMENTS AND TEST METHODS |
| EN ISO 6145-1:2008 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003) |
| EN 14042:2003 | Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| EN 14662-5:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography |
| EN 14211:2012 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| EN 838:2010 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| BS ISO 6145-1 : 2003 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| 17/30323887 DC : 0 | BS EN 62990-131 - WORKPLACE ATMOSPHERES - PART 1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR TOXIC GASES |
| I.S. EN 60079-29-1:2016 | EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES |
| I.S. EN ISO 6145-1:2008 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC VOLUMETRIC METHODS - PART 1: METHODS OF CALIBRATION |
| BS EN 14212:2012 | Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| ISO 19739:2004 | Natural gas — Determination of sulfur compounds using gas chromatography |
| DIN EN 13528-3:2004-04 | Ambient air quality - Diffuse samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance |
| EN ISO 17621:2015 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| DIN EN 14662-5:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 5: DIFFUSIVE SAMPLING FOLLOWED BY SOLVENT DESORPTION AND GAS CHROMATOGRAPHY |
| DIN EN 14042:2003-07 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
| ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
| ISO 7504:2015 | Gas analysis Vocabulary |
| ISO 6145-1:2003 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.