ISO 5636-3:2013
Current
Current
The latest, up-to-date edition.
Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
10-16-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 5636-3:2013 specifies the Bendtsen method for determining the air permeance of paper and board using the Bendtsen apparatus.
It is applicable to papers and boards which have air permeances between 0,35 µm/(Pa·s) and 15 µm/(Pa·s) when tested with the Bendtsen apparatus.
It is unsuitable for rough-surfaced materials which cannot be securely clamped to avoid leakage.
| DevelopmentNote |
Supersedes ISO/DIS 5636-3. (10/2013)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-ISO 5636-3:2015 | Identical |
| UNI ISO 5636-3 : 2014 | Identical |
| NEN ISO 5636-3 : 2013 | Identical |
| BS ISO 5636-3:2013 | Identical |
| AS/NZS 1301.440:2016 | Identical |
| NF ISO 5636-3 : 2014 | Identical |
| IS 1060 : Part 5 : Sec 11 : 2021 | Identical |
| BIS IS/ISO 5636-3 : 1992 | Identical |
| INCITS/ISO/IEC 15457-1 : 2011 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| 15/30325867 DC : 0 | BS EN 868-3 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| ISO 11605:1995 | Paper and board Calibration of variable-area flowmeters |
| CSA Z15882 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| 06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| 06/30154066 DC : 0 | BS ISO/IEC 15457-1 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| AAMI ISO 11140-4 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| CSA ISO/IEC 15457-1 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| DIN EN 868-10:2009-09 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| 17/30360912 DC : 0 | BS EN 868-10 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 11140-4:2007-07 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| DIN EN ISO 11140-3:2009-09 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| UNE-EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| BS EN ISO 5270:2012 | Pulps. Laboratory sheets. Determination of physical properties |
| UNE-EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| BS EN 868-3:2017 | Packaging for terminally sterilized medical devices Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods |
| UNE-EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| DIN EN 868-2:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| EN 61086-2:2004 | Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test |
| 15/30274545 DC : 0 | BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES |
| 07/30167327 DC : DRAFT AUG 2007 | BS EN 868-7 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR THE MANUFACTURE OF SEALABLE PACKS FOR MEDICAL USE FOR STERILIZATION BY ETHYLENE OXIDE OR IRRADIATION - REQUIREMENTS AND TEST METHODS |
| I.S. EN 11140-4:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| 07/30167336 DC : DRAFT AUG 2007 | BS EN 868-10 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES FOR USE IN THE MANUFACTURE OF SEALABLE POUCHES, REELS AND LIDS - REQUIREMENTS AND TEST METHODS |
| 07/30166924 DC : DRAFT AUG 2007 | BS EN 868-2 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| PREN 868-7 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| ISO/IEC 15457-1:2008 | Identification cards — Thin flexible cards — Part 1: Physical characteristics |
| AAMI ISO 11140-5 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
| BS EN 868-9:2009 | Packaging for terminally sterilized medical devices Uncoated nonwoven materials of polyolefines. Requirements and test methods |
| AAMI ISO 11140-4 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| 17/30360918 DC : 0 | BS EN 868-9 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| PREN 868-3 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| UNI EN 868-9 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| NF EN 868-9 : 2009 | PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| BS EN 868-10:2009 | Packaging for terminally sterilized medical devices Adhesive coated nonwoven materials of polyolefines. Requirements and test methods |
| BS EN 868-7:2017 | Packaging for terminally sterilized medical devices Adhesive coated paper for low temperature sterilization processes. Requirements and test methods |
| UNE-EN ISO 5270:2013 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| I.S. EN 868-3:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11140-3:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| I.S. EN 868-7:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-2:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-6:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 5270:2012 | PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES (ISO 5270:2012) |
| I.S. EN ISO 15882:2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| ONORM EN ISO 5270 : 2013 | PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES (ISO 5270:2012) |
| PREN 868-10 : DRAFT 2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 61086-2:2004 | COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST |
| BS ISO 11605:1995 | Paper and board. Calibration of variable-area flowmeters |
| 15/30325864 DC : 0 | BS EN 868-7 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| AAMI ISO 15882 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| BS ISO 11140-5:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators for Bowie and Dick-type air removal tests |
| BS EN 61086-2:2004 | Coatings for loaded printed wire boards (conformal coatings) Methods of test |
| CSA Z15882:09 (R2019) | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (Adopted ISO 15882:2008, second edition, 2008-09-01) |
| AAMI ISO 11140-5 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
| CSA ISO/IEC 15457-1 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| CEI EN 61086-2 : 2005 | COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST |
| PREN 868-2 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| ISO 11140-5:2007 | Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
| ISO 11140-3:2007 | Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| EN 868-10:2009 | Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods |
| I.S. EN 868-10:2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| EN 868-9:2009 | Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods |
| EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| UNI EN ISO 5270 : 2012 | PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES |
| UNI EN ISO 11140-3 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| UNI EN ISO 15882 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| 15/30325855 DC : 0 | BS EN 868-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| BS ISO/IEC 15457-1:2001 | Identification cards. Thin flexible cards Physical characteristics |
| PREN 868-6 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS ISO/IEC 15457-3:2008 | Identification cards. Thin flexible cards Test methods |
| 07/30166936 DC : DRAFT AUG 2007 | BS EN 868-6 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR THE MANUFACTURE OF STERILE BARRIER SYSTEMS INTENDED FOR STERILIZATION BY LOW TEMPERATURE STERILIZATION PROCESSES OR IRRADIATION - REQUIREMENTS AND TEST METHODS |
| AAMI ISO 11140-3 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| AAMI ISO 11140-3 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| PREN 868-9 : DRAFT 2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
| DIN EN ISO 5270:2013-02 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| DIN EN 868-6:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 11140-4:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| BS EN 868-2:2017 | Packaging for terminally sterilized medical devices Sterilization wrap. Requirements and test methods |
| ANSI/AAMI/ISO 15882:2008(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| IEC 61086-2:2004 | Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test |
| ISO 5270:2012 | Pulps — Laboratory sheets — Determination of physical properties |
| BS EN ISO 15882:2008 | Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results |
| BS EN 868-6:2017 | Packaging for terminally sterilized medical devices Paper for low temperature sterilization processes. Requirements and test methods |
| EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| EN ISO 11140-4:2007 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| EN 867-3:1997/AC:1998 | NON-BIOLOGICAL SYSTEMS FOR USE IN STERILIZERS - SPECIFICATION FOR CLASS B INDICATORS FOR USE IN THE BOWIE AND DICK TEST |
| EN ISO 11140-3:2009 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007, including Cor 1:2007) |
| EN 753-1 : 1997 | IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - GENERAL TECHNICAL SPECIFICATIONS |
| EN ISO 5270:2012 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| EN 753-3 : 1999 | IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS |
| EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| EN ISO 15882:2008 | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2008) |
| BS ISO 18522:2016 | Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles |
| CSA Z15882 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNI EN 868-10 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| 15/30325858 DC : 0 | BS EN 868-6 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| 07/30166927 DC : DRAFT AUG 2007 | BS EN 868-3 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-7:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| 07/30167333 DC : DRAFT AUG 2007 | BS EN 868-9 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES FOR USE IN THE MANUFACTURE OF SEALABLE POUCHES, REELS AND LIDS - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-9:2009-09 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| 01/648266 DC : DRAFT MAY 2001 | ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| CSA ISO/IEC 15457-3 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| NF EN 868-10 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-9:2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-3:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-2:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 11140-3:2009 | Sterilization of health care products. Chemical indicators Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| UNE-EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| ISO 15882:2008 | Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results |
| BS EN 753-1:1997 | Identification card systems. Intersector thin flexible cards General technical specifications |
| BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
| DIN EN 868-3:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-6:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| CAN/CSA-ISO 11140-3:18 | Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (Adopted ISO 11140-3:2007, second edition, 2007-03-15, including technical corrigendum 1:2007) |
| CAN/CSA-ISO 11140-5:18 | CAN/CSA-ISO 11140-5:18 - Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests (Adopted ISO 11140-5:2007, second edition, 2007-03-15) |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO/TR 24498:2006 | Paper, board and pulps Estimation of uncertainty for test methods |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| TAPPI T 1200 : 2014 | INTERLABORATORY EVALUATION OF TEST METHODS TO DETERMINE TAPPI REPEATABILITY AND REPRODUCIBILITY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.