ISO 554:1976
Current
Current
The latest, up-to-date edition.
Standard atmospheres for conditioning and/or testing — Specifications
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
08-01-1976
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies three atmospheres approximated to the natural environmental conditions. However, it is desirable to use only one of these.
| Committee |
ISO/TMBG
|
| DocumentType |
Standard
|
| Pages |
1
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 29539 : 1992 | Identical |
| NS 4485 : 1ED 1983 | Identical |
| UNI ISO 554 : 1987 | Identical |
| UNE 7520:1994 | Similar to |
| DIN 50014:1985-07 | Identical |
| PREN 927-10 : DRAFT 2017 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| PD CEN/TS 16360:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of film extensibility by indentation of a coating on a wooden substrate |
| 97/713385 DC : DRAFT AUG 1997 | PREN 3656 - AEROSPACE SERIES - POLYCARBONATE SELF-EXTINGUISHING LOW SMOKE EMISSION - CHARACTERISTICS |
| ASTM F 2546 : 2007 | Standard Test Method for Snowboard Step-in Bindings |
| ISO/IEC 14473:1999 | Information technology — Office equipment — Minimum information to be specified for image scanners |
| 09/30096507 DC : DRAFT APR 2009 | BS ISO 1143 - METALLIC MATERIALS - ROTATING BAR BENDING FATIGUE TESTING |
| BS ISO 16840-2:2018 | Wheelchair seating Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
| 14/30250513 DC : 0 | BS EN ISO 9863-1 - GEOSYNTHETICS - DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES - PART 1: SINGLE LAYERS |
| NAPM IT2.4 : 0 | PHOTOGRAPHY (SENSITOMETRY) - BLACK-AND-WHITE AERIAL CAMERA FILMS - DETERMINATION OF ISO SPEED AND AVERAGE GRADIENT |
| 13/30255888 DC : 0 | BS ISO 5660-1 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 1: HEAT RELEASE RATE (CONE CALORIMETER METHOD) AND SMOKE PRODUCTION RATE (DYNAMIC MEASUREMENT) |
| BS EN 60068-1:2014 | Environmental testing General and guidance |
| I.S. EN 731:1995 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS |
| PD CEN/TS 16498:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of tannin staining |
| UNI EN ISO 10580 : 2012 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - TEST METHOD FOR VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS |
| NF EN ISO 10722 : 2007 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
| BS EN 62849:2016 | Performance evaluation methods of mobile household robots |
| BS ISO 16000-25:2011 | Indoor air Determination of the emission of semi-volatile organic compounds by building products. Micro-chamber method |
| 05/30132008 DC : DRAFT APR 2005 | BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| BS 7079-B6(1996) : 1996 AMD 10698 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS BY THE BRESLE METHOD |
| BS ISO 8127-2:1999 | Micrographics. A6 size microfilm jackets Other types of jacket for 16 mm and 35 mm microfilm |
| I.S. EN 1722:1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE MAXIMUM TENSILE STRENGTH |
| PD IEC/TR 60721-4-3:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations |
| BS ISO 3029:1995 | Photography. 126 size cartridges. Dimensions of cartridge, film and backing paper |
| I.S. EN ISO 22523:2006 | EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
| ISO 16000-9:2006 | Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
| 16/30336459 DC : 0 | BS EN ISO 13426-1 - GEOTEXTILES AND GEOTEXTILES-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
| I.S. EN 1724:1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION |
| BS ISO 1009:2000 | Photography. Paper dimensions. Rolls for printers |
| 06/30137671 DC : DRAFT OCT 2006 | ISO 9012 - GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS |
| BS ISO 16525-1:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives General test methods |
| UNI EN 16402 : 2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| I.S. EN ISO 13433:2006 | GEOSYNTHETICS - DYNAMIC PERFORATION TEST (CONE DROP TEST) |
| BS ISO 12575-1:2012 | Thermal insulation. Exterior insulating systems for foundations Material specification |
| NF EN 15815 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION |
| 02/108180 DC : DRAFT JAN 2003 | EN ISO 9864 - GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA OF GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS |
| 10/30215108 DC : 0 | BS EN 60312-2 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 2: WET VACUUM CLEANERS - METHODS OF MEASURING THE PERFORMANCE |
| 03/109881 DC : DRAFT JULY 2003 | ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND CYLINDRICAL OUTSIDE SURFACE |
| BS ISO 15635:2001 | Coated abrasives. Flap discs |
| S.R. CEN/TS 16499:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| BS ISO/TR 14696:1999 | Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL) |
| PREN 1372 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| 07/30137665 DC : 0 | BS ISO 2503 - GAS WELDING EQUIPMENT - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR |
| S.R. CEN/TS 16359:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| DIN EN 15813:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures |
| ISO 5175-2:2017 | Gas welding equipment — Safety devices — Part 2: Devices not incorporating a flame (flashback) arrestor |
| I.S. EN 15646:2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| 02/102699 DC : DRAFT MAY 2002 | PREN 14418 - GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
| 06/30160065 DC : 0 | BS EN ISO 11143 ED 2 - DENTAL EQUIPMENT - AMALGAM SEPARATORS |
| BS EN 60312:2008 | Vacuum cleaners for household use. Methods of measuring the performance |
| BS 903-A35:1978 | Methods of testing vulcanized rubber. Temperatures, humidities and times for conditioning and testing of test pieces |
| 02/105049 DC : DRAFT AUG 2002 | BS EN ISO 13428 - GEOSYNTHETICS - DETERMINATION OF THE PROTECTION EFFICIENCY OF A GEOSYNTHETIC AGAINST IMPACT DAMAGE |
| 08/30172620 DC : DRAFT OCT 2008 | BS EN ISO 8536-6 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 6: FREEZE DRYING CLOSURES FOR INFUSION BOTTLES |
| BIS IS/ISO 15635 : 2001 | COATED ABRASIVES - FLAP DISCS |
| I.S. EN ISO 9863-2:1997 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES - PART 2: PROCEDURE FOR DETERMINATION OF THICKNESS OF SINGLE LAYERS OF MULTILAYER PRODUCTS |
| 06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| DIN EN 15819:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
| DIN EN 15820:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness |
| 04/19987165 DC : DRAFT SEP 2004 | BS EN 13200-4 - SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT REQUIREMENTS |
| I.S. ENV 13419-2:1999 | BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 2: EMISSION TEST CELL METHOD |
| PD IEC TR 60721-4-6:2002 | Ship environmentClassification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 |
| 08/30170025 DC : DRAFT AUG 2008 | BS ISO 28620 - MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES |
| DIN EN ISO 9239-1:2010-11 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| 14/30296756 DC : 0 | BS EN 1902 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| BS ISO 9236-1:2004 | Photography. Sensitometry of screen/film systems for medical radiography Determination of sensitometric curve shape, speed and average gradient |
| DD IEC/PAS 62611:2009 | Vacuum cleaners for commercial use. Methods for measuring performance |
| BS ISO 8127-1:1989 | Micrographics. A6 size microfilm jackets Five-channel jacket for 16 mm microfilm |
| BS 7825-3.6:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Dimensional properties |
| PD CEN/TS 16516:2013 | Construction products. Assessment of release of dangerous substances. Determination of emissions into indoor air |
| DIN ISO 16000-28:2012-12 | Indoor air - Part 28: Determination of odour emissions from building products using test chambers (ISO 16000-28:2012) |
| I.S. EN ISO 1716:2010 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
| UNE-EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
| 13/30275218 DC : 0 | BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE |
| 12/30248096 DC : 0 | BS ISO 17178 - ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| 97/713392 DC : DRAFT AUG 1997 | PREN 4243 - AEROSPACE SERIES - ACRYLIC (PMMA) SHEETS - TECHNICAL SPECIFICATION |
| INCITS/ISO/IEC 11159 : 1996 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
| BS ISO 17554:2014 | Reaction to fire tests. Mass loss measurement |
| BS ISO 3434:2012 | Ships and marine technology. Heated glass panes for ships’ rectangular windows |
| BIS IS/ISO 21948 : 2001 | COATED ABRASIVES - PLAIN SHEETS |
| 05/30131382 DC : DRAFT MAR 2005 | BS EN 15184 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION COATED STEEL TO CONCRETE (PULL-OUT TEST) |
| BS EN 15820:2011 | Polymer modified bituminous thick coatings for waterproofing. Determination of watertightness |
| 14/30296676 DC : 0 | BS EN 60312-2 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 2: WET CARPET CLEANING APPLIANCES - METHODS FOR MEASURING THE PERFORMANCE |
| 13/30279122 DC : 0 | BS ISO 11110 - WINTER-SPORTS EQUIPMENT - TEST DEVICES FOR THE SETTING OF THE FUNCTIONAL UNIT SKI/BOOT/BINDING - REQUIREMENTS AND TESTS |
| 03/101771 DC : 0 | ISO 7331 - SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
| S.R. CEN/TS 16360:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE |
| BS 7007-3:1988 | Abrasive products Specification for dimensional tolerances on non-standard coated abrasive products |
| BS ISO 21948:2001 | Coated abrasives. Plain sheets |
| PREN 13483 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| BS 3999-12:1982 | Methods of measuring the performance of household electrical appliances Vacuum cleaners |
| BS ISO 14546:2000 | Photography. Aerial films and spools. Dimensions |
| UNE-EN 15646:2010 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| I.S. ENV 13419-1:1999 | BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 1: EMISSION TEST CHAMBER METHOD |
| I.S. EN ISO 10580:2012 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - TEST METHOD FOR VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS (ISO 10580:2010) |
| DD ENV ISO 10722-1:1998 | Geotextiles and geotextile-related products. Procedure for simulating damage during installation. Installation in granular materials |
| PREN 4366 : 200P1 | AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, MULTI-AXIALLY STRETCHED, AND LOW MOISTURE ABSORPTION - PROPERTIES |
| PREN 3656 : 200P1 | AEROSPACE SERIES - POLYCARBONATE, SELF-EXTINGUISHING, LOW SMOKE EMISSION - CHARACTERISTICS |
| ISO 16840-3:2014 | Wheelchair seating — Part 3: Determination of static, impact and repetitive load strengths for postural support devices |
| PREN 2719 : 200P1 | AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION |
| INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| PREN 4243 : 200P1 | AEROSPACE SERIES - CAST ACRYLIC SHEETS - TECHNICAL SPECIFICATION |
| PREN 4364 : 200P1 | AEROSPACE SERIES - CAST ACRYLIC - PROPERTIES |
| DIN EN ISO 1716:2010-11 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
| ISO 2421:2003 | Coated abrasives — Cylindrical sleeves |
| CEI EN 62885-3 : 2016 | SURFACE CLEANING APPLIANCES - PART 3: WET CARPET CLEANING APPLIANCES - METHODS FOR MEASURING THE PERFORMANCE |
| S.R. CR 13259:1998 | GAS WELDING EQUIPMENT - INDUSTRIAL MANUAL AND MACHINE OXYGEN-FUEL GASES BLOWPIPES FOR FLAME HEATING AND ALLIED PROCESSES |
| I.S. EN 62929:2014 | CLEANING ROBOTS FOR HOUSEHOLD USE - DRY CLEANING: METHODS OF MEASURING PERFORMANCE |
| I.S. EN 927-6:2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| I.S. 140-3:1987 | SCHOOL FURNITURE - PART 3: PERFORMANCE REQUIREMENTS AND TESTS FOR TABLES FOR SCHOOLS |
| I.S. EN 15817:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - WATER RESISTANCE |
| PREN 1373 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| BS ISO 16000-23:2009 | Indoor air Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials |
| ISO 8127-2:1999 | Micrographics A6 size microfilm jackets Part 2: Other types of jacket for 16 mm and 35 mm microfilm |
| I.S. EN 60068-1:2014 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE |
| ISO 13785-2:2002 | Reaction-to-fire tests for façades — Part 2: Large-scale test |
| I.S. EN ISO 5175-2:2017&LC:2019 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 2: NOT INCORPORATING A FLAME (FLASHBACK) ARRESTOR (ISO 5175-2:2017) |
| BS ISO 12232:2006 | Photography. Digital still cameras. Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index |
| ISO 2976:2005 | Coated abrasives Abrasive belts Selection of width/length combinations |
| UNI CEN/TS 16360 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE |
| BS EN 927-6:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| ISO 21950:2001 | Coated abrasives Plain discs |
| ISO 9236-3:1999 | Photography Sensitometry of screen/film systems for medical radiography Part 3: Determination of sensitometric curve shape, speed and average gradient for mammography |
| ISO 12232:2006 | Photography Digital still cameras Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index |
| UNE-EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| ISO 16840-6:2015 | Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions |
| I.S. EN ISO 3665:2013 | PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS (ISO 3665:2011) |
| UNI EN ISO 1716 : 2010 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
| ANSI PH1.17 : 1990 | PHOTOGRAPHY (FILM) - MEDICAL RADIOGRAPHIC SHEET AND ROLL FILMS - DIMENSIONS |
| ASTM F 944 : 1997 | Standard Specification for Properties of Adult Alpine Ski Boots (Withdrawn 2004) |
| 17/30362165 DC : 0 | BS EN 16402 - PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| NF ISO 15344 : 2005 | SNOWBOARD STEP-IN BINDINGS - REQUIREMENTS AND TEST METHODS |
| NF EN ISO 10773 : 2011 | CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF PERMEABILITY TO GASES |
| NF EN 15646 : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| ASTM F 1722 : 2015 : REDLINE | Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis |
| ISO 16000-25:2011 | Indoor air Part 25: Determination of the emission of semi-volatile organic compounds by building products Micro-chamber method |
| I.S. EN ISO 9539:2010 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010) |
| EN ISO 10722:2007 | Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007) |
| ASTM D 4933 : 2016 : REDLINE | Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials |
| ASTM F 2495 : 2005 : R2011 | Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment (Withdrawn 2020) |
| ISO/TR 5660-3:2003 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement |
| EN 1263-1:2014 | Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods |
| I.S. EN 927-3:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
| I.S. EN ISO 3630-1:2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 3630-1 : 2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| DIN EN 13999-1:2014-03 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| DIN EN 13483:2013-09 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| DIN EN 13415:2010-05 | TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| DIN EN ISO 11143:2008-10 | DENTISTRY - AMALGAM SEPARATORS |
| DIN EN ISO 10321:2008-08 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
| DIN EN ISO 10062:2008-04 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006) |
| UNE-EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 12706:2000 | Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics |
| ONORM EN ISO 3630-1 : 2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 13743:2017 | Safety requirements for coated abrasive products |
| BS EN ISO 11498:2000 | Dental handpieces. Dental low-voltage electric motors |
| BS EN ISO 7291 : 2010 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS FOR MANIFOLD SYSTEMS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 30 MPA (300 BAR) |
| UNE-EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| BS EN ISO 2503 : 2009 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR (30 MPA) |
| BS EN ISO 10321:2008 | Geosynthetics. Tensile test for joints/seams by wide-width strip method |
| ISO 10773:2011 | Clay geosynthetic barriers Determination of permeability to gases |
| UNE-EN ISO 13427:2015 | Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014) |
| BS EN 927-4:2000 | Paints and varnishes. Coating materials and coating systems for exterior wood Assessment of the water-vapour permeability |
| UNE-EN 13999-1:2014 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| BS EN ISO 22523:2006 | External limb prostheses and external orthoses. Requirements and test methods |
| BS EN 964-1:1995 | Geotextiles and geotextile-related products. Determination of thickness at specified pressures Single layers |
| BS EN ISO 9864:2005 | Geosynthetics. Test method for the determination of mass per unit area of geotextiles and geotextile-related products |
| BS EN ISO 9073-10:2004 | Textiles. Test methods for nonwovens Lint and other particles generation in the dry state |
| BS EN 1895:2001 | Adhesives for paper and board, packaging and disposable sanitary products. 180°. \'T\' peel test for a flexible-to-flexible assembly |
| BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
| ISO 13428:2005 | Geosynthetics — Determination of the protection efficiency of a geosynthetic against impact damage |
| I.S. EN ISO 10321:2008 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
| I.S. EN ISO 9239-1:2010 | REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
| CEN/TS 16498:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining |
| EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| DIN ISO 5355:2006-05 | ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 13426-2:2005-08 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) |
| CEN/TS 16499:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| DIN EN ISO 13433:2006-10 | GEOSYNTHETICS - DYNAMIC PERFORATION TEST (CONE DROP TEST) |
| CR 13259:1998 | Gas welding equipment - Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes |
| EN 1129-2:1995 | Furniture - Foldaway beds - Safety requirements and testing - Part 2: Test methods |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 13057:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN 13408:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength |
| EN 62849:2016 | Performance evaluation methods of mobile household robots |
| EN 62826:2014 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance |
| EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
| DIN EN ISO 9864:2005-05 | Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005); German version EN ISO 9864:2005 |
| EN ISO 22523:2006 | External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:2006) |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| NF EN ISO 3630-1 : 2008 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| EN 12706:1999 | Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics |
| NF EN ISO 13426-1 : 2004 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
| EN 13409:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time |
| ONORM EN 13200-4 : 2006 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
| NF EN 13200-4 : 2007 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
| ONORM EN 16416 : 2013 | GEOSYNTHETIC CLAY BARRIERS - DETERMINATION OF WATER FLUX INDEX - FLEXIBLE WALL PERMEAMETER METHOD AT CONSTANT HEAD |
| I.S. EN 13200-4:2006 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
| OVE/ONORM EN 62929 : 2015 | CLEANING ROBOTS FOR HOUSEHOLD USE - DRY CLEANING: METHODS OF MEASURING PERFORMANCE (IEC 62929:2014) |
| 17/30286850 DC : DRAFT SEP 2017 | BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION |
| PD IEC/TR 60721-4-4:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at non-weatherprotected locations |
| BS ISO 11087:2015 | Alpine ski-bindings. Retention devices. Requirements and test methods |
| BS ISO 2421:2003 | Coated abrasives. Cylindrical sleeves |
| BS EN 282:1997 | Avalanche beacons. Transmitter/receiver systems. Safety requirements and testing |
| UNI CEN/TS 16700 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
| BS ISO 10580 : 2010 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - TEST METHOD FOR VOLATILE ORGANIC COMPOUND (VOC) EMISSIONS |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| 04/30109552 DC : DRAFT FEB 2004 | ISO 16000-9 - INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - EMISSION TEST CHAMBER METHOD |
| I.S. EN 1723:2000 | LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS |
| UNE-EN 62826:2015 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance |
| 97/713394 DC : DRAFT AUG 1997 | PREN 4365 - AEROSPACE STANDARD - HEAT AND CRAZING RESISTANT ACRYLIC - CAST AND CROSS LINKED - LOW MOISTURE ABSORPTION - PROPERTIES |
| BS 2782-0:1982 | Methods of testing plastics Introduction |
| I.S. EN 62826:2014 | SURFACE CLEANING APPLIANCES - FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE - METHODS OF MEASURING THE PERFORMANCE |
| BS EN 27813:1992 | Identification cards. Financial transaction cards |
| UNE-EN ISO 9012:2012 | Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2008) |
| ISO 17554:2014 | Reaction to fire tests Mass loss measurement |
| 07/30161895 DC : 0 | BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| 06/30116005 DC : DRAFT MAY 2006 | ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS |
| UNI EN ISO 9012 : 2011 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS |
| XP P84 523 : 2008 XP | GEOMEMBRANES - GEOMEMBRANES LINING SYSTEM - DETERMINATION OF THE INDENTATION RESISTANCE UNDER HYDROSTATIC LOAD |
| BS 7108:1990 | Guide to design and use of identification cards as financial transaction cards |
| BS ISO 16840-3:2014 | Wheelchair seating Determination of static, impact and repetitive load strengths for postural support devices |
| 09/30205415 DC : 0 | BS EN 60312-1 ED 1.0 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1: DRY VACUUM - METHODS FOR MEASURING PERFORMANCE |
| 17/30364312 DC : 0 | BS EN 927-10 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| I.S. EN ISO 7785-1:1999 | DENTAL HANDPIECES - PART 1: HIGH-SPEED AIR TURBINE HANDPIECES |
| I.S. EN ISO 11498:1999 | DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRICAL MOTORS |
| PD IEC TR 60721-4-7:2001 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Portable and non-stationary use |
| I.S. EN ISO 16000-10:2006 | INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CELL METHOD |
| ISO 9848:2003 | Photography Source document microfilms Determination of ISO speed and ISO average gradient |
| 12/30254319 DC : 0 | BS ISO 15739 - PHOTOGRAPHY - ELECTRONIC STILL-PICTURE IMAGING - NOISE MEASUREMENTS |
| 11/30247568 DC : 0 | BS EN 12703 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF LOW TEMPERATURE FLEXIBILITY OR COLD CRACK TEMPERATURE |
| BS ISO 7187:1995 | Photography. Materials for direct-positive colour-print cameras. Determination of ISO speed |
| BS EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
| BS ISO 11498 : 1997 AMD 10705 | DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRIC MOTORS |
| BS EN 16402:2013 | Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing |
| 01/122049 DC : DRAFT MAY 2001 | ISO/DIS 9073-10 - TEXTILES - TEST METHODS FOR NONWOVENS - PART 10: LINT AND OTHER PARTICLES GENERATION IN THE DRY STATE |
| DIN ISO 16000-25:2012-01 | Indoor air - Part 25: Determination of the emission of semi-volatile organic compounds by building products - Micro-chamber method (ISO 16000-25:2011) |
| BS ISO 14535:2001 | Photography. Room-light loading packages for electronic scanners and image-setting film and paper rolls. Dimensions and related requirements |
| BS ISO 1099:2017 | Metallic materials. Fatigue testing. Axial force-controlled method |
| ASTM F 2546 : 2007 : R2012 | Standard Test Method for Snowboard Step-in Bindings |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| BS EN 15646:2009 | Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods |
| ISO 16287:2005 | Plain bearings Thermoplastic bushes Dimensions and tolerances |
| PD ISO/TS 5660-3:2012 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Guidance on measurement |
| ISO 6148:2001 | Photography — Micrographic films, spools and cores — Dimensions |
| BS 3483-0:1990 | Methods for testing pigments for paints General introduction |
| PREN 12226 : DRAFT 2010 | GEOSYNTHETICS - GENERAL TESTS FOR EVALUATION FOLLOWING DURABILITY TESTING |
| 15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| ISO 13785-1:2002 | Reaction-to-fire tests for façades — Part 1: Intermediate-scale test |
| 03/312217 DC : DRAFT AUG 2003 | ISO 16067-2 - PHOTOGRAPHY - ELECTRONIC SCANNERS FOR PHOTOGRAPHIC IMAGES - SPATIAL RESOLUTION MEASUREMENTS - PART 2: FILM SCANNERS |
| BS EN ISO 3665:2013 | Photography. Intra-oral dental radiographic film and film packets. Manufacturer specifications |
| INCITS/ISO/IEC 11159 : 1996 : R2004 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
| BS EN 16516:2017 | Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air |
| BS ISO 732:2000 | Photography. 120-size and 220-size films. Dimensions |
| BS ISO 4090:1991 | Photography. Film dimensions. Medical radiography |
| 12/30242499 DC : DRAFT MAR 2012 | BS ISO 16525-2 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 2: DETERMINATION OF ELECTRICAL CHARACTERISTICS |
| BS ISO 11416:1995 | Tennis rackets. Racket components and physical parameters |
| DIN ISO 1012:2000-04 | PHOTOGRAPHY - FILM IN SHEETS AND ROLLS FOR GENERAL USE - DIMENSIONS |
| DIN EN 15816:2011-06 | Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain |
| DIN ISO 2421:2004-07 | Coated abrasives - Cylindrical sleeves (ISO 2421:2003) |
| BS 5817-20:1989 | Specification for audiovisual, video and television equipment and systems Methods of measuring and reporting the performance of 16 mm sound film projectors |
| PD 6633:1998 | Gas welding equipment. Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes |
| BS ISO 11312:2000 | Photography. Sheets of sensitized material for the pre-press industry. Dimensions and related requirements |
| 03/106014 DC : DRAFT MAR 2003 | ISO 6106 - ABRASIVE PRODUCTS - CHECKING THE GRIT SIZE OF SUPERABRASIVES |
| S.R. CEN/TS 16700:2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
| ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| NF EN 15818 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF DIMENSIONAL STABILITY AT HIGH TEMPERATURE |
| 04/19976241 DC : DRAFT AUG 2004 | |
| UNI CEN/TS 16498 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF TANNIN STAINING |
| UNI CEN/TS 14417 : 2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
| 04/30096361 DC : DRAFT APR 2004 | ISO/DIS 15242-3 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL DOUBLE-ROW SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE |
| 11/30234858 DC : DRAFT APR 2011 | BS ISO 3434 - SHIPBUILDING AND MARINE STRUCTURES - HEATED GLASS PANES FOR SHIPS' RECTANGULAR WINDOWS |
| 13/30238910 DC : 0 | BS EN ISO 13427 - GEOSYNTHETICS - ABRASION DAMAGE SIMULATION (SLIDING BLOCK TEST) |
| 14/30296759 DC : 0 | BS EN 1903 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| CSA Z10524 : 2002 | PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR MEDICAL GAS SYSTEMS |
| UNI EN ISO 9539 : 2014 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| 02/565097 DC : DRAFT DEC 2002 | BS ISO 17398 - SAFETY COLOURS AND SAFETY SIGNS - DURABILITY OF SAFETY SIGNS |
| NF EN 15816 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN |
| UNE-EN ISO 10580:2012 | Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010) |
| BS ISO 21951:2001 | Coated abrasives. Plain discs with holes for dust extraction |
| BS EN 15816:2011 | Polymer modified bituminous thick coatings for waterproofing. Resistance to rain |
| DIN EN ISO 12836:2015-11 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| BS EN 14151:2010 | Geosynthetics. Determination of burst strength |
| BS EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing. Reduction of the thickness of the layer when fully dried |
| PD IEC/TR 60721-4-1:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Storage |
| CEI EN 60312 : 2008 | VACUUM CLEANERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
| 11/30247565 DC : 0 | BS EN 12704 - ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS - DETERMINATION OF FOAM FORMATION FOR AQUEOUS ADHESIVES |
| DD ENV 13419-1:1999 | Building products. Determination of the emission of volatile organic compounds Emission test chamber method |
| 04/30115299 DC : DRAFT JUN 2004 | ISO/DIS 5172 - GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS |
| ASTM F 2495 : 2005 | Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment |
| 08/30171147 DC : DRAFT JULY 2008 | BS ISO 16000-24 - INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUNDS AND CARBONYL COMPOUNDS WITHOUT FORMALDEHYDE CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| 02/564963 DC : DRAFT NOV 2002 | EN 13419-2 - BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 2: EMISSION TEST CELL METHOD |
| BS ISO 9848:2003 | Photography. Source document microfilms. Determination of ISO speed and ISO average gradient |
| I.S. EN ISO 10722:2007 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
| 04/30123591 DC : DRAFT OCT 2004 | EN 15062 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| 03/105707 DC : DRAFT MAR 2003 | BS EN ISO 21530 - DENTISTRY - DETERMINATION OF RESISTANCE TO CHEMICAL DISINFECTANTS OF MATERIALS USED FOR DENTAL EQUIPMENT SURFACES |
| BS ISO 3366:1999 | Coated abrasives. Abrasive rolls |
| BS EN ISO 25619-2:2015 | Geosynthetics. Determination of compression behaviour Determination of short-term compression behaviour |
| PREN 4365 : 200P1 | AEROSPACE SERIES - HEAT AND CRAZING RESISTANT CAST ACRYLIC, CROSSLINKED, AND LOW MOISTURE ABSORPTION - PROPERTIES |
| ISO 13450:1996 | Photography 110-size cartridge, film and backing paper Dimensions |
| UNI ISO 5598 : 2012 | FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
| PREN 3095 : 200P1 | AEROSPACE SERIES - SEALANTS - TEST METHODS - DETERMINATION OF EXTENDED ASSEMBLY TIME |
| PREN 13719 : DRAFT 2014 | GEOSYNTHETICS - DETERMINATION OF THE LONG TERM PROTECTION EFFICIENCY OF GEOSYNTHETICS IN CONTACT WITH GEOSYNTHETIC BARRIERS |
| UNI EN 15815 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION |
| ISO 18454:2018 | Footwear — Standard atmospheres for conditioning and testing of footwear and components for footwear |
| IEC TR 60721-4-5:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-5: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ground vehicle installations |
| ISO 732:2000 | Photography 120-size and 220-size films Dimensions |
| ISO 3800:1993 | Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results |
| ISO 1007:2000 | Photography 135-size film and magazine Specifications |
| BS EN ISO 9539 : 2010 | GAS WELDING EQUIPMENT- MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN 14151:2010 | GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
| I.S. EN 62849:2016 | PERFORMANCE EVALUATION METHODS OF MOBILE HOUSEHOLD ROBOTS |
| ISO 7176-16:2012 | Wheelchairs Part 16: Resistance to ignition of postural support devices |
| I.S. EN 15818:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF DIMENSIONAL STABILITY AT HIGH TEMPERATURE |
| ISO 16067-1:2003 | Photography Spatial resolution measurements of electronic scanners for photographic images Part 1: Scanners for reflective media |
| ISO 21581:2010 | Timber structures - Static and cyclic lateral load test methods for shear walls |
| ISO 21951:2001 | Coated abrasives — Plain discs with holes for dust extraction |
| EN ISO 5175-1:2017 | Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017) |
| ISO 8127-1:1989 | Micrographics — A6 size microfilm jackets — Part 1: Five channel jacket for 16 mm microfilm |
| NF ISO 16000-24 : 2010 | INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUNDS (EXCEPT FORMALDEHYDE) CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
| ISO 16670:2003 | Timber structures — Joints made with mechanical fasteners — Quasi-static reversed-cyclic test method |
| NF ISO 16000-23 : 2010 | INDOOR AIR - PART 23: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF FORMALDEHYDE CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| BS ISO 7176-16:2012 | Wheelchairs Resistance to ignition of postural support devices |
| I.S. EN 15812:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
| ISO 3434:2012 | Ships and marine technology — Heated glass panes for ships' rectangular windows |
| UNE-EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
| ISO/IEC TR 24705:2005 | Information technology Office machines Machines for colour image reproduction Method of specifying image reproduction of colour devices by digital and analog test charts |
| ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
| ISO/IEC 28360:2015 | Information technology Office equipment Determination of chemical emission rates from electronic equipment |
| NF ISO 7331 : 2011 | SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 16499 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| ASTM F 2494 : 2005 | Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment |
| NF EN ISO 9012 : 2011 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS |
| DIN EN ISO 12944-6:1998-07 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS |
| BS EN ISO 13426-1:2003 | Geotextiles and geotextile-related products. Strength of internal structural junctions Geocells |
| EN ISO 5175-2:2017 | Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor (ISO 5175-2:2017, Corrected version 2019-01) |
| EN 927-6:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| I.S. EN ISO 12957-1:2005 | GEOSYNTHETICS - DETERMINATION OF FRICTION CHARACTERISTICS - PART 1: DIRECT SHEAR TEST |
| NF EN ISO 5912 : 2011 | CAMPING TENTS |
| I.S. EN ISO 13426-1:2003 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
| ISO 14535:2001 | Photography Room-light loading packages for electronic scanners and image-setting film and paper rolls Dimensions and related requirements |
| ISO 14524:2009 | Photography Electronic still-picture cameras Methods for measuring opto-electronic conversion functions (OECFs) |
| DIN EN 13200-4:2006-12 | Spectator facilities - Part 4: Seats - Product characteristics |
| DIN EN ISO 7291:2015-12 | Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010 + Amd 1:2015) (includes Amendment :2015) |
| DIN EN 1392:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
| DIN EN 927-3:2012-10 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| DIN EN 15272-2:2007-06 | Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead; German version EN 15272-2:2007 |
| DIN EN 14574:2015-06 | GEOSYNTHETICS - DETERMINATION OF THE PYRAMID PUNCTURE RESISTANCE OF SUPPORTED GEOSYNTHETICS |
| DIN ISO 15242-1:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS (ISO 15242-1:2004) |
| UNE-EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| BS EN 12222:1997 | Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear |
| BS EN 1902:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear creep test |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| BS EN ISO 13294:1997 | Dental handpieces. Dental air-motors |
| BS EN ISO 4090:2004 | Photography. Medical radiographic cassettes/screens/films and hard-copy imaging films. Dimensions and specifications |
| ISO 13426-1:2003 | Geotextiles and geotextile-related products Strength of internal structural junctions Part 1: Geocells |
| ISO 15711:2003 | Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water |
| ISO 15242-1:2015 | Rolling bearings Measuring methods for vibration Part 1: Fundamentals |
| ISO 13426-2:2005 | Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites |
| ISO 11143:2008 | Dentistry Amalgam separators |
| UNE-EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| BS EN 1244:1998 | Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| ISO/IEC 11159:1996 | Information technology — Office equipment — Minimum information to be included in specification sheets — Copying machines |
| BS EN ISO 5912:2011 | Camping tents |
| BS EN 15307:2014 | Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
| UNE-EN 13238:2011 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN 62929:2014 | Cleaning robots for household use - Dry cleaning: Methods of measuring performance |
| I.S. EN 13238:2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
| EN ISO 25619-1:2008 | Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008) |
| DIN EN 1902:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN ISO/IEC 11159:1998 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
| DIN ISO 9523:2016-05 | TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS (ISO 9523:2015) |
| I.S. EN 13483:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| DIN EN ISO 12957-2:2005-05 | Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005); German version EN ISO 12957-2:2005 |
| DIN EN 738-1:2002-07 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES |
| I.S. EN ISO 11143:2008 | DENTISTRY - AMALGAM SEPARATORS |
| I.S. EN 13743:2017 | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| I.S. EN 927-5:2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 5: ASSESSMENT OF THE LIQUID WATER PERMEABILITY |
| ONORM ISO 5355 : 2006 | ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 10722:2007-08 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
| I.S. EN 14574:2015 | GEOSYNTHETICS - DETERMINATION OF THE PYRAMID PUNCTURE RESISTANCE OF SUPPORTED GEOSYNTHETICS |
| I.S. EN ISO 7291:2010 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS FOR MANIFOLD SYSTEMS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 30 MPA (300 BAR) (ISO 7291:2010) |
| I.S. EN ISO 10062:2008 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERE AT VERY LOW CONCENTRATIONS OF POLLUTING GAS(ES) |
| DIN EN 1903:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| I.S. EN 1392:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
| DIN EN 1897:2002-02 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE COMPRESSIVE CREEP PROPERTIES |
| DIN EN ISO 12957-1:2005-05 | GEOSYNTHETICS - DETERMINATION OF FRICTION CHARACTERISTICS - PART 1: DIRECT SHEAR TEST |
| I.S. EN 15307:2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| I.S. EN ISO 10319:2015 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
| I.S. EN ISO 12236:2006 | GEOSYNTHETICS - STATIC PUNCTURE TEST (CBR TEST) |
| I.S. EN 1263-1:2014 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| DIN EN 737-1:1998-02 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| I.S. EN 1360:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| DIN EN 13238:2010-06 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| I.S. EN 13999-1:2013 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| I.S. EN ISO 5172:2006 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS (ISO 5172:2006) |
| I.S. EN 14293:2006 | ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| I.S. EN 1902:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN ISO 2503:2009 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR (30 MPA) (ISO 2503:2009) |
| I.S. EN ISO 13427:2014 | GEOSYNTHETICS - ABRASION DAMAGE SIMULATION (SLIDING BLOCK TEST) (ISO 13427:2014) |
| I.S. EN 13851:2003 | METHODS OF TEST FOR HYDRAULIC SETTING FLOOR SMOOTHING AND/OR LEVELLING COMPOUNDS - DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
| I.S. EN 927-4:2000 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 4: ASSESSMENT OF THE WATER-VAPOUR PERMEABILITY |
| ASME B5.57 : 2012 | METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
| ONORM EN 13483 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| BS 2782-0:1992 | Methods of testing plastics Introduction |
| BS 5550-2.1.1:1993 | Cinematography. 16 mm film. Raw stock Specification for the cutting and perforating dimensions of 16 mm motion-picture film and magnetic film |
| ASME B5.57 : 2012 : R2017 | METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
| VDE 0804 : 1989 AMD 1 1992 | TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS |
| 15/30323803 DC : 0 | BS ISO 12505-2 - SKIN BARRIER FOR OSTOMY AIDS - TEST METHODS - PART 2: WET-INTEGRITY AND ADHESIVE STRENGTH |
| ECMA 328 : 8ED 2017 | DETERMINATION OF CHEMICAL EMISSION RATES FROM ELECTRONIC EQUIPMENT - PART 1 (USING-CONSUMABLES) AND PART 2 (NOT USING-CONSUMABLES) |
| ISO 1012:1998 | Photography Films in sheets and rolls for general use Dimensions |
| BS ISO/TR 14697:1997 | Fire tests. Guidance on the choice of substrates for building products |
| ISO 3772:2000 | Photography Rolls of sensitized material for the pre-press industry Dimensions and related requirements |
| BS ISO 6846:1992 | Photography. Black and white continuous tone papers. Determination of ISO speed and ISO range for printing |
| 17/30343039 DC : 0 | BS ISO 16000-24 - INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUND CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| S.R. CEN/TS 14417:2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
| AIIM MS5 : 0 | MICROFICHE |
| 13/30246099 DC : 0 | BS ISO 17094 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT |
| I.S. EN ISO 16000-9:2006 | INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD |
| I.S. EN 15820:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF WATERTIGHTNESS |
| 08/30166507 DC : DRAFT OCT 2008 | BS ISO 10580 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS TEST METHOD FOR EMISSIONS OF VOLATILE ORGANIC COMPOUNDS (VOC) |
| 10/30216098 DC : 0 | BS ISO 3665 - PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS |
| UNI EN 14151 : 2010 | GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
| UNI EN ISO 3665 : 2013 | PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS |
| ISO 8366:1987 | Coated abrasive products Dimensional tolerances on non-standard conversions |
| 07/30162228 DC : 0 | BS ISO 14524 - PHOTOGRAPHY - ELECTRONIC STILL-PICTURE CAMERAS - METHODS FOR MEASURING OPTO-ELECTRONIC CONVERSION FUNCTIONS (OECFS) |
| 97/713393 DC : DRAFT AUG 1997 | PREN 4364 - AEROSPACE STANDARD - CAST (PMMA) ACRYLIC - PROPERTIES |
| 03/101690 DC : 0 | ISO 11087 - ALPINE SKI-BINDINGS - RETENTION DEVICES - SAFETY REQUIREMENTS AND TEST METHODS |
| 04/30106626 DC : DRAFT APR 2004 | BS ISO 21181 - LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS |
| 01/124426 DC : 0 | ISO/CD 21367 - PLASTICS - REACTION TO FIRE - TEST METHOD FOR FLAME SPREAD AND COMBUSTION PRODUCT RELEASE FROM VERTICALLY ORIENTATED SPECIMENS |
| CEI EN 62849 : 1ED 2017 | PERFORMANCE EVALUATION METHODS OF MOBILE HOUSEHOLD ROBOTS |
| 10/30175254 DC : 0 | BS ISO 5912 - CAMPING TENTS |
| UNE-EN 15813:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures |
| ISO/TS 19708:2007 | Geosynthetics Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
| 05/30098700 DC : DRAFT JUL 2005 | ISO 9680 - DENTAL OPERATING LIGHT |
| 98/101455 DC : DRAFT FEB 1998 | PREN ISO 12957-1:1998 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE FRICTION CHARACTERISTICS - PART 1: DIRECT SHEAR TEST |
| PD IEC/TR 60721-4-2:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation |
| 07/30154260 DC : 0 | BS ISO 23848-1 - MACHINE TOOLS - BALL SPLINES - PART 1: CLASSIFICATION AND GEOMETRICAL REQUIREMENTS |
| I.S. EN 730-1:2002 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 1: INCORPORATING A FLAME (FLASHBACK) ARRESTOR |
| 14/30295044 DC : 0 | BS ISO 19095-3 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 3: TEST METHODS |
| BS 7007-5:1994 | Abrasive products Specification for dimensions, tolerances and designation of abrasive belts |
| 01/709336 DC : DRAFT JUN 2001 | ISO 732 - PHOTOGRAPHY - 120-SIZE AND 220-SIZE FILMS - DIMENSIONS |
| I.S. EN 1637:1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE MEASUREMENT OF THE ELECTRICAL RESISTANCES |
| 14/30296753 DC : 0 | BS EN 1372 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| DIN ISO 5912 E : 2004 | CAMPING TENTS |
| 02/713184 DC : DRAFT NOV 2002 | ISO 1099 - METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE CONTROLLED METHOD |
| BS ISO 13450:1996 | Photography. 110-size cartridge, film and backing paper. Dimensions |
| 04/30123559 DC : DRAFT OCT 2004 | EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS |
| DIN ISO 69:1999-04 | Cinematography - 16 mm motion-picture and magnetic film - Cutting and perforating dimensions (ISO 69:1998) |
| 05/30137735 DC : DRAFT AUG 2005 | ISO 22264 - TELEMARK SKI-BOOTS FOR ADULTS - INTERFACE WITH TELEMARK SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
| 04/30109558 DC : DRAFT FEB 2004 | ISO 16000-10 - INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - EMISSION TEST CELL METHOD |
| DIN EN 1360:2013-09 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 06/30065723 DC : DRAFT JUN 2006 | ISO 10321 - GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH METHOD |
| BS EN 15815:2011 | Polymer modified bituminous thick coatings for waterproofing. Resistance to compression |
| ISO 5655:2000 | Photography Industrial radiographic films (roll and sheet) and metal intensifying screens Dimensions |
| 03/115041 DC : DRAFT SEP 2003 | ISO/DIS 17431 - FIRE TEST - REDUCED-SCALE MODEL BOX TEST |
| NF ISO 21367 : 2008 | PLASTICS - REACTION TO FIRE - TEST METHOD FOR FLAME SPREAD AND COMBUSTION PRODUCT RELEASE FROM VERTICALLY ORIENTED SPECIMENS |
| 08/30166877 DC : DRAFT FEB 2008 | BS ISO 27447 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS |
| BS ISO 1012:1998 | Photography. Films in sheets and rolls for general use. Dimensions |
| 10/30197665 DC : 0 | BS ISO 16000-28 - INDOOR AIR - PART 28: DETERMINATION OF ODOUR EMISSIONS FROM BUILDING PRODUCTS USING TEST CHAMBERS |
| 97/713388 DC : DRAFT AUG 1997 | PREN 2719 - AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION |
| PD ISO/TS 5660-4:2016 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Measurement of low levels of heat release |
| BS ISO 1008:1992 | Photography. Paper dimensions. Pictorial sheets |
| BS ISO 9236-3:1999 | Photography. Sensitometry of screen/film systems for medical radiography Determination of sensitometric curve shape, speed and average gradient for mammography |
| 92/76588 DC : DRAFT JUN 1992 | ISO/DIS 9960-2 - DRAUGHTING INSTRUMENTS WITH OR WITHOUT GRADUATION - PART 2: PROTRACTORS |
| BS ISO 16067-2:2004 | Photography. Electronic scanners for photographic images. Spatial resolution measurements Film scanners |
| BS 7329:1990 | Specification for materials for equipment used in gas welding, cutting and allied processes |
| 97/710376 DC : 0 | PREN 3095 - AEROSPACE SERIES - TEST METHODS FOR SEALANTS - DETERMINATION OF EXTENDED ASSEMBLY TIME |
| 14/30301877 DC : 0 | BS EN 13719 - GEOSYNTHETICS - DETERMINATION OF THE LONG TERM PROTECTION EFFICIENCY OF GEOSYNTHETICS IN CONTACT WITH GEOSYNTHETIC BARRIERS |
| BS ISO 3665 : 2011 | PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS |
| DIN EN 15815:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Resistance to compression |
| BS ISO 11894-1:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics Oxide-ion-conducting solid electrolytes |
| DIN EN 15812:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
| I.S. EN 60312-1:2017 | VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1: DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
| DIN EN 15817:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Water resistance |
| BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| DIN 58648-4:1991-11 | RESPIRATORY EQUIPMENT; COMPRESSED AIR LINE BREATHING APPARATUS IN LIGHT DUTY CONSTRUCTION (LIGHT DUTY COMPRESSED AIR LINE BREATHING APPARATUS); SAFETY REQUIREMENTS, TESTING, MARKING |
| 13/30280551 DC : 0 | BS ISO 16840-6 - WHEELCHAIR SEATING - PART 6: SIMULATED USE AND DETERMINATION OF THE CHANGES IN PROPERTIES - SEAT CUSHIONS |
| DD ENV 13999-1:2001 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
| 17/30355404 DC : 0 | BS IEC 62885-5 ED.1.0 - SURFACE CLEANING APPLIANCES - PART 5: HIGH PRESSURE CLEANERS AND STEAM CLEANERS - METHODS OF MEASURING THE PERFORMANCE |
| DIN EN 14151:2010-11 | Geosynthetics - Determination of burst strength |
| 11/30236369 DC : 0 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER |
| 12/30274859 DC : 0 | BS ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
| BS ISO 16287:2005 | Plain bearings. Thermoplastic bushes. Dimensions and tolerances |
| BS ISO 16525-2:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of electrical characteristics for use in electronic assemblies |
| BS ISO 28620:2010 | Medical devices. Non-electrically driven portable infusion devices |
| DIN EN ISO 10773:2011-08 | Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011) |
| BS ISO/IEC 15457-3:2008 | Identification cards. Thin flexible cards Test methods |
| FD CR 13259 : 99 FD | GAS WELDING EQUIPMENT - INDUSTRIAL MANUAL AND MACHINE OXYGEN-FUEL GASES BLOWPIPES FOR FLAME HEATING AND ALLIED PROCESSES |
| BS EN 62826:2014 | Surface cleaning appliances. Floor treatment machines with or without traction drive, for commercial use. Methods of measuring the performance |
| 09/30192433 DC : 0 | BS ISO 21581 - TIMBER STRUCTURES - STATIC AND CYCLIC LATERAL LOAD TEST METHOD FOR SHEAR WALLS |
| 02/706173 DC : DRAFT JUN 2002 | ISO/CD 21550 - PHOTOGRAPHY - ELECTRONIC SCANNERS FOR PHOTOGRAPHIC IMAGES - DYNAMIC RANGE MEASUREMENTS |
| 04/30098104 DC : DRAFT JUL 2004 | ISO 12232 - PHOTOGRAPHY - DIGITAL STILL CAMERAS - DETERMINATION OF EXPOSURE INDEX, ISO SPEED RATINGS, STANDARD OUTPUT SENSITIVITY, AND RECOMMENDED EXPOSURE INDEX |
| 17/30316733 DC : 0 | BS ISO 16696-1 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - PART 1: COMPONENT PERFORMANCE AND PRODUCTION REQUIREMENTS |
| 17/30343036 DC : 0 | BS ISO 16000-23 - INDOOR AIR - PART 23: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF FORMALDEHYDE AND OTHER CARBONYL COMPOUNDS CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS |
| BS EN ISO 8362-5:2016 | Injection containers and accessories Freeze drying closures for injection vials |
| UNE-EN 15817:2011 | Polymer modified bituminous thick coatings for waterproofing - Water resistance |
| BS ISO 5800:1987 | Photography. Colour negative films for still photography. Determination of ISO speed |
| 03/317167 DC : DRAFT OCT 2003 | ISO 16287 - PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES |
| 12/30272385 DC : 0 | BS EN 1263-1 - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| 11/30216844 DC : 0 | BS ISO 6106 - ABRASIVE PRODUCTS - CHECKING THE GRIT SIZE OF SUPERABRASIVES |
| 09/30175165 DC : 0 | BS EN ISO 10773 - CLAY-GEOSYNTHETIC BARRIERS - DETERMINATION OF PERMEABILITY TO GASES |
| 13/30256250 DC : 0 | BS EN 60312-1-1 - VACUUM CLEANERS FOR HOUSEHOLD USE - PART 1-1: CORDLESS DRY VACUUM CLEANERS - METHODS FOR MEASURING THE PERFORMANCE |
| BS EN ISO 9012:2011 | Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests |
| 11/30199626 DC : 0 | BS ISO 11894-1 - FINE CERAMIC (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CONDUCTIVITY MEASUREMENT OF ION-CONDUCTIVE FINE CERAMICS - PART 1: OXIDE-ION-CONDUCTING SOLID ELECTROLYTES |
| BS ISO 6148:2001 | Photography. Micrographic films, spools and cores. Dimensions |
| 99/109104 DC : DRAFT NOV 1999 | BS EN 13729 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE LONG TERM PROTECTION EFFICIENCY OF GEOTEXTILES IN CONTACT WITH GEOMEMBRANES |
| 03/106018 DC : DRAFT APR 2003 | ISO 2976 - COATED ABRASIVES - ABRASIVE BELTS - SELECTION OF WIDTH/LENGTH COMBINATIONS |
| 97/711340 DC : DRAFT JUL 1997 | ISO/CD 5598 - FLUID POWER SYSTEMS - TERMINOLOGY, CLASSIFICATION AND SYMBOLS |
| 03/317861 DC : DRAFT OCT 2003 | EN ISO 22523 - EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
| BS ISO 23848-1:2009 | Machine tools. Ball splines General characteristics and requirements |
| 14/30293503 DC : 0 | BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| UNI EN 15646 : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| IEC 60312-1:2010+AMD1:2011 CSV | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| 02/106426 DC : DRAFT NOV 2002 | PREN 14574 - GEOSYNTHETICS - DETERMINATION OF THE PYRAMID PUNCTURE RESISTANCE OF SUPPORTED GEOSYNTHETICS |
| UNE-EN 62849:2017 | Performance evaluation methods of mobile household robots |
| BS ISO 5655:2000 | Photography. Industrial radiographic films (roll and sheet) and metal intensifying screens. Dimensions |
| BS ISO 14524:2009 | Photography. Electronic still-picture Cameras. Methods for measuring optoelectronic conversion functions (OECFs) |
| BS ISO 21550:2004 | Photography. Electronic scanners for photographic images. Dynamic range measurements |
| UNE-ISO 23848-1:2013 | Machine tools -- Ball splines -- Part 1: General characteristics and requirements |
| UNI EN 15817 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - WATER RESISTANCE |
| NF EN 14151 : 2010 | GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
| UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| ISO 4324:1977 | Surface active agents — Powders and granules — Measurement of the angle of repose |
| I.S. EN 27813:1993 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
| ISO 1352:2011 | Metallic materials Torque-controlled fatigue testing |
| PREN 3624 : 200P1 | AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
| ISO 2240:2003 | Photography Colour reversal camera films Determination of ISO speed |
| ISO 18560-1:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment Part 1: Removal of formaldehyde |
| I.S. EN ISO 5175-1:2017 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 1: DEVICES INCORPORATING A FLAME (FLASHBACK) ARRESTOR (ISO 5175-1:2017) |
| NF EN 15819 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - REDUCTION OF THE THICKNESS OF THE LAYER WHEN FULLY DRIED |
| UNI EN ISO 25619-1 : 2009 | GEO-SYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
| S.R. CEN/TS 16498:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF TANNIN STAINING |
| UNE-EN ISO 3665:2013 | Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011) |
| UNE-EN 62885-3:2015 | Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance |
| UNE-EN 62929:2014 | Cleaning robots for household use - Dry cleaning: Methods of measuring performance |
| ISO 491:2002 | Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions |
| ONORM EN 927-6 : 2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| ISA TR52.00.01 : 2006 | RECOMMENDED ENVIRONMENTS FOR STANDARDS LABORATORIES |
| ISO 9236-1:2004 | Photography Sensitometry of screen/film systems for medical radiography Part 1: Determination of sensitometric curve shape, speed and average gradient |
| ISO 11659-3:2004 | Textile machinery and accessories Machine parts in contact with textile processing oils Part 3: Determination of the impact on lacquers |
| UNI EN 15818 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF DIMENSIONAL STABILITY AT HIGH TEMPERATURE |
| DIN ISO 15242-3:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-3:2006 + COR. 1:2010) |
| UNI EN ISO 10722 : 2007 | GEOSYNTHETICS - INDEX TEST PROCEDURE FOR THE EVALUATION OF MECHANICAL DAMAGE UNDER REPEATED LOADING - DAMAGE CAUSED BY GRANULAR MATERIAL |
| I.S. EN 50375:2002 | TESTING METHODOLOGY FOR WIPERS USED IN ELECTRICAL INSULATING OIL |
| UNE-EN ISO 25619-2:2015 | Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015) |
| IEC TR 60721-4-4:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations |
| DD ENV 13419-2:1999 | Building products. Determination of the emission of volatile organic compounds Emission test cell method |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| BS 6427-1:1983 | Conditioning of sacks for testing. Method for conditioning paper sacks |
| PREN 1263-1 : DRAFT 2012 | SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| UNI CEN/TS 14418 : 2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
| ISO 5355:2005 | Alpine ski-boots Requirements and test methods |
| NF ISO 16000-25 : 2011 | INDOOR AIR - PART 25: DETERMINATION OF THE EMISSION OF SEMI-VOLATILE ORGANIC COMPOUNDS FOR BUILDING PRODUCTS - MICRO-CHAMBER METHOD |
| I.S. EN 16416:2013 | GEOSYNTHETIC CLAY BARRIERS - DETERMINATION OF WATER FLUX INDEX - FLEXIBLE WALL PERMEAMETER METHOD AT CONSTANT HEAD |
| XP G38 030 : 2008 XP | GEOTEXTILES - DETERMINATION OF THE NUMBER OF CONSTRICTIONS |
| ISO 16840-10:2014 | Wheelchairs Resistance to ignition of non-integrated seat and back support cushions Part 10: Requirements and test methods |
| ISO/TS 5660-3:2012 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement |
| ISO 23848-1:2009 | Machine tools Ball splines Part 1: General characteristics and requirements |
| ISO 18055-1:2004 | Photography and imaging Inkjet media: Classification, nomenclature and dimensions Part 1: Photo-grade media (paper and film) |
| ISO 21948:2001 | Coated abrasives Plain sheets |
| EN 16402:2013 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
| ISO 16000-24:2009 | Indoor air Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials |
| ISO 21367:2007 | Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens |
| I.S. EN ISO 10773:2011 | CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF PERMEABILITY TO GASES |
| IEC TR 60721-4-1:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Storage |
| IEC TR 60721-4-2:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Transportation |
| ISO 21949:2001 | Coated abrasives — Plain sheets with holes for dust extraction |
| IEC 60312-2:2010 | Vacuum cleaners for household use - Part 2: Wet cleaning appliances - Methods of measuring the performance |
| ISO 6106:2013 | Abrasive products — Checking the grain size of superabrasives |
| NF EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| NF EN 1841 : 1999 | ADHESIVES - TEST METHODS FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES OF A LINOLEUM FLOOR COVERING IN CONTACT WITH AN ADHESIVE |
| EN ISO 12236:2006 | Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
| DIN EN 927-5:2007-03 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability |
| DIN EN 1372:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| DIN EN ISO 22523:2007-04 | External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:2006) |
| DIN EN 1373:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| DIN EN 13743:2016-01 (Draft) | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| UNE-EN ISO 7291:2011 | Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010) |
| ISO 9523:2015 | Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods |
| BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
| ISO 9863-2:1996 | Geotextiles and geotextile-related products Determination of thickness at specified pressures Part 2: Procedure for determination of thickness of single layers of multilayer products |
| BS EN ISO 13431:1999 | Geotextiles and geotextiles-related products. Determination of tensile creep and creep rupture behaviour |
| ISO 10580:2010 | Resilient, textile and laminate floor coverings Test method for volatile organic compound (VOC) emissions |
| BS EN 737-4:1998 | Medical gas pipeline systems Terminal units for anaesthetic gas scavenging systems |
| BS EN 14591-2:2007 | Explosion prevention and protection in underground mines. Protective systems Passive water trough barriers |
| ISO 13433:2006 | Geosynthetics — Dynamic perforation test (cone drop test) |
| ISO 12957-2:2005 | Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test |
| BS EN 1722:1999 | Light conveyor belts. Test method for the determination of the maximum tensile strength |
| BS EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Application of repair mortar overhead |
| ISO 13431:1999 | Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour |
| ISO 9012:2008 | Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests |
| UNE-EN 16416:2014 | Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head |
| ISO 10062:2006 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
| ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method |
| ISO 5912:2011 | Camping tents |
| BS EN ISO 13428:2005 | Geosynthetics. Determination of the protection efficiency of a geosynthetic against impact damage |
| BS EN 1542:1999 | Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off |
| BS EN 12964:2001 | Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature |
| ISO 9539:2010 | Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes |
| BS EN 12523:1999 | External limb prostheses and external orthoses. Requirements and test methods |
| UNE-EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| I.S. EN 14080:2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| ONORM EN ISO 5912 : 2013 | CAMPING TENTS (ISO 5912:2011) |
| I.S. EN ISO 9073-10:2005 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 10: LINT AND OTHER PARTICLES GENERATION IN THE DRY STATE |
| I.S. EN ISO 8502-6:2006 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD |
| ONORM EN ISO 8502-6 : 2006 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD |
| EN ISO 12957-1:2005 | Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1:2005) |
| UNE-EN 927-3:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| I.S. EN 1841:1999 | ADHESIVES - TEST METHODS FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES OF A LINOLEUM FLOOR COVERING IN CONTACT WITH AN ADHESIVE |
| EN 16516:2017 | Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
| EN 13743:2017 | Safety requirements for coated abrasive products |
| EN ISO 9012:2011 | Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2008) |
| EN ISO 9864:2005 | Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005) |
| EN 26891:1991 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) |
| EN 738-1:1997/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES |
| EN 737-1 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| UNI EN 13999-1 : 2014 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| UNI EN ISO 10321 : 2008 | GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
| UNI EN 16416 : 2013 | GEOSYNTHETIC CLAY BARRIERS - DETERMINATION OF WATER FLUX INDEX - FLEXIBLE WALL PERMEAMETER METHOD AT CONSTANT HEAD |
| EN 15816:2011 | Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain |
| UNI EN 14080 : 2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| UNI EN ISO 10062 : 2008 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERE AT VERY LOW CONCENTRATIONS OF POLLUTING GAS(ES) |
| EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| UNI EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| UNI EN 1360 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| EN 13999-1:2013 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure |
| UNI EN ISO 9239-1 : 2010 | REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
| UNI EN 13483 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| UNI EN ISO 11143 : 2008 | DENTISTRY - AMALGAM SEPARATORS |
| UNI EN ISO 10319 : 2008 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST |
| UNI EN 13238 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
| BS 4756:1998 | Specification for ready-mixed aluminium priming paints for woodwork |
| DIN ISO 9236-1:2007-08 | Photography - Sensitometry of screen/film systems for medical radiography - Part 1: Determination of sensitometric curve shape, speed and average gradient (ISO 9236-1:2004) |
| 12/30259194 DC : 0 | BS EN 13999-1 - ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| DIN EN ISO 3665:2013-07 | PHOTOGRAPHY - INTRA-ORAL DENTAL RADIOGRAPHIC FILM AND FILM PACKETS - MANUFACTURER SPECIFICATIONS (ISO 3665:2011) |
| DIN ISO 8362-5:2011-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| 01/710913 DC : DRAFT JULY 2001 | ISO/DIS 15242-1 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS |
| DIN ISO 4324:1983-12 | SURFACE ACTIVE AGENTS - POWDERS AND GRANULES - MEASUREMENT OF THE ANGLE OF REPOSE |
| 04/30106622 DC : DRAFT APR 2004 | BS ISO 21180 - LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE MAXIMUM TENSILE STRENGTH |
| BS 7007-6:1994 | Abrasive products Specification for dimensions, tolerances and designation of abrasive sheets |
| ISO 12505-1:2014 | Skin barrier for ostomy aids Test methods Part 1: Size, surface pH and water-absorbency |
| ISO 6328:2000 | Photography Photographic materials Determination of ISO resolving power |
| 02/102118 DC : DRAFT MAY 2002 | BS EN ISO 13426-2 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 2: GEOCOMPOSITES |
| 13/30275212 DC : 0 | BS ISO 16840-3 - WHEELCHAIR SEATING - PART 3: DETERMINATION OF STATIC, IMPACT AND REPETITIVE LOAD STRENGTHS FOR POSTURAL SUPPORT DEVICES |
| BS 7561(1992) : AMD 8615 | METHOD FOR CORROSION TESTS IN ARTIFICIAL ATMOSPHERES AT VERY LOW CONCENTRATIONS OF POLLUTING GAS(ES) |
| I.S. EN ISO 25649-1:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
| I.S. EN 15062:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| BS ISO 1352:2011 | Metallic materials. Torque-controlled fatigue testing |
| ISO 16057:2002 | Coated abrasives Vulcanized fibre discs |
| 11/30240201 DC : 0 | BS ISO/IEC 28360 - INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - DETERMINATION OF CHEMICAL EMISSION RATES FROM ELECTRONIC EQUIPMENT |
| PD ISO/TS 16840-12:2015 | Wheelchair seating Apparatus and method for cushion envelopment testing |
| I.S. EN ISO 9864:2005 | GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA OF GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS |
| PREN 927-6 : DRAFT 2016 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| 13/30275852 DC : 0 | BS EN ISO 10319 - GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST |
| I.S. EN 16402:2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| 18/30372409 DC : DRAFT APR 2018 | BS EN ISO 3630-1 - DENTISTRY - ENDODONTIC INSTRUMENTS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 15820 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF WATERTIGHTNESS |
| PD 6577:1995 | The influence of environmental conditions on the testing of textile materials |
| NF ISO 5912 : 2004 | CAMPING TENTS |
| 14/30302228 DC : 0 | BS ISO/IEC 28360 - INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - DETERMINATION OF CHEMICAL EMISSION RATES FROM ELECTRONIC EQUIPMENT |
| BS ISO/IEC 28360:2015 | Information technology. Office equipment. Determination of chemical emission rates from electronic equipment |
| BS ISO 8778:2003 | Pneumatic fluid power. Standard reference atmosphere |
| ISO 14546:2000 | Photography Aerial films and spools Dimensions |
| 02/102694 DC : DRAFT MAY 2002 | PREN 14414 - GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS |
| BS ISO 16000-28:2012 | Indoor air Determination of odour emissions from building products using test chambers |
| BS ISO 14807:2001 | Photography. Transmission and reflection densitometers. Method for determining performance |
| PD IEC/TR 60721-4-0:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Introduction |
| BS 476-15:1993 | Fire tests on building materials and structures Method for measuring the rate of heat release of products |
| 15/30330735 DC : 0 | BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| I.S. EN 16516:2017 | CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| NF EN 15817 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - WATER RESISTANCE |
| PD IEC TR 60721-4-5:2002 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Ground vehicle installations |
| DIN ISO 16000-30:2015-05 | INDOOR AIR - PART 30: SENSORY TESTING OF INDOOR AIR (ISO 16000-30:2014) |
| 14/30296750 DC : 0 | BS EN 1373 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| PREN 13999-1 : DRAFT 2012 | ADHESIVES - SHORT TERM METHOD FOR MEASURING THE EMISSION PROPERTIES OF LOW-SOLVENT OR SOLVENT-FREE ADHESIVES AFTER APPLICATION - PART 1: GENERAL PROCEDURE |
| BS EN 60312-1:2017 | Vacuum cleaners for household use Dry vacuum cleaners. Methods for measuring the performance |
| 05/30137738 DC : DRAFT AUG 2005 | ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
| 06/30156792 DC : 0 | BS EN ISO 25619-2 - GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR |
| BS 7774:1994 | Threaded fasteners. Axial load fatigue testing. Test methods and evaluation of results |
| NFX 30 442 : 2008 | WASTE - LABORATORY DETERMINATION OF THE PERMEABILITY COEFFICIENT OF A SATURATED MATERIAL - PERMEABILITY TESTS USING AN OEDOMETER AT CONSTANT/VARIABLE HYDRAULIC LOAD |
| BS EN ISO 10580:2012 | Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions |
| 14/30304354 DC : 0 | BS EN ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| BS ISO 6328:2000 | Photography. Photographic materials. Determination of ISO resolving power |
| 07/30152892 DC : 0 | BS EN ISO 7291 - GAS WELDING EQUIPMENT - PRESSURE REGULARS FOR MANIFOLD SYSTEMS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR |
| 02/564962 DC : DRAFT NOV 2002 | ENV 13419-1 - BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 1: EMISSION TEST CHAMBER METHOD |
| BS ISO 11040-4:2015 | Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| BS ISO 12505-1:2014 | Skin barrier for ostomy aids. Test methods Size, surface pH and water-absorbency |
| 99/109099 DC : DRAFT NOV 1999 | BS EN 13738 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF PULLOUT RESISTANCE IN SOIL |
| UNE-EN 15815:2011 | Polymer modified bituminous thick coatings for waterproofing - Resistance to compression |
| 08/30166803 DC : DRAFT FEB 2008 | BS EN ISO 9539 - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN ISO 25619-1:2009 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
| DIN ISO 9960-1:1993-10 | DRAUGHTING INSTRUMENTS WITH OR WITHOUT GRADUATION - PART 1: DRAUGHTING SCALE RULES |
| PD CEN/TR 13259:2013 | Gas welding equipment. Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes |
| BS ISO 16067-1:2003 | Photography. Spatial resolution measurements for electronic scanners for photographic images Scanners for reflective media |
| DIN ISO 7331:2011-10 | Ski-poles for alpine skiing - Requirements and test methods (ISO 7331:2011) |
| 02/108179 DC : DRAFT JAN 2003 | EN ISO 9863-1 - GEOSYNTHETICS - DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES - PART 1: SINGLE LAYERS |
| BS EN 50375:2002 | Testing methodology for wipers used in electrical insulating oil |
| UNE-EN 15820:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness |
| 11/30250273 DC : 0 | BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| DIN EN 16416:2013-12 | Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head |
| DIN ISO 3434:2015-12 | SHIPS AND MARINE TECHNOLOGY - HEATED GLASS PANES FOR SHIPS' RECTANGULAR WINDOWS (ISO 3434:2012) |
| 13/30273499 DC : 0 | BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| 97/713395 DC : DRAFT AUG 1997 | PREN 4366 - AEROSPACE STANDARD - HEAT AND CRAZING RESISTANT ACRYLIC - CAST, CROSSLINKED AND MULTI-AXIALLY STRETCHED - LOW MOISTURE ABSORPTION - PROPERTIES |
| 12/30265322 DC : DRAFT SEP 2012 | BS EN 14574 - GEOSYNTHETICS - DETERMINATION OF THE PYRAMID PUNCTURE RESISTANCE OF SUPPORTED GEOSYNTHETICS |
| ISO 12575-1:2012 | Thermal insulation products — Exterior insulating systems for foundations — Part 1: Material specification |
| DD ISO/TS 19708:2007 | Geosynthetics. Procedure for simulating damage under interlocking-concrete-block pavement by the roller compactor method |
| BS EN 62929:2014 | Cleaning robots for household use. Dry cleaning: Methods of measuring performance |
| 16/30345769 DC : 0 | BS EN 927-6 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| 06/30153965 DC : DRAFT JULY 2006 | BS ISO/IEC 28630 - INFORMATION TECHNOLOGY - DETERMINATION OF CHEMICAL EMISSION RATES FROM ELECTRONIC EQUIPMENT |
| BS ISO 15739:2017 | Photography. Electronic still-picture imaging. Noise measurements |
| 06/30065729 DC : DRAFT JUN 2006 | ISO 10319 - GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST |
| DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 16359 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| UNI EN ISO 10773 : 2011 | CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF PERMEABILITY TO GASES |
| 07/30167352 DC : DRAFT AUG 2007 | BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| DIN ISO 15242-2:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-2:2004 + COR. 1:2010) |
| ISO/TR 17252:2008 | Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering |
| PD CEN/TS 16359:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of knot staining resistance of wood coatings |
| S.R. CEN/TR 13259:2013 | GAS WELDING EQUIPMENT - INDUSTRIAL MANUAL AND MACHINE BLOWPIPES FOR FLAME HEATING, FLAME BRAZING AND ALLIED PROCESSES |
| DD ISO/TS 22269:2005 | Reaction to fire tests. Fire growth. Full-scale test for stairs and stair coverings |
| 14/30280977 DC : 0 | BS ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY |
| I.S. EN 282:1992 | AVALANCHE BEACONS - TRANSMITTER/RECEIVER SYSTEMS - SAFETY REQUIREMENTS AND TESTING |
| DIN ISO 2976:2005-10 | Coated abrasives - Abrasive belts - Selection of width/length combinations (ISO 2976:2005) |
| 12/30259433 DC : 0 | BS EN 16416 - GEOSYNTHETIC CLAY BARRIERS - DETERMINATION OF WATER FLUX INDEX - FLEXIBLE WALL PERMEAMETER METHOD AT CONSTANT HEAD |
| 16/30333765 DC : DRAFT JAN 2016 | BS EN ISO 5175-1 - GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 1: INCORPORATING A FLAME (FLASHBACK) ARRESTOR |
| 15/30322088 DC : 0 | BS EN 16516 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| 98/101458 DC : DRAFT FEB 1998 | PREN ISO 12957-2:1998 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE FRICTION CHARACTERISTICS - PART 2: INCLINED PLANE TEST |
| DIN EN ISO 8362-5:2016-07 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| 14/30287632 DC : 0 | BS EN ISO 12836:2012/AMD 1 - DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY |
| 08/30176450 DC : DRAFT JAN 2008 | BS EN ISO 27668-1 - GEL INK BALL PENS AND REFILLS - PART 1: GENERAL USE |
| 04/30112114 DC : DRAFT APR 2004 | ISO 10303-56 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - INTEGRATED GENERIC RESOURCE - STATE |
| BS ISO 6106:2013 | Abrasive products. Checking the grain size of superabrasives |
| BS ISO 21949:2001 | Coated abrasives. Plain sheets with holes for dust extraction |
| NF EN ISO 9539 : 2010 AMD 1 2014 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| 10/30197474 DC : 0 | BS ISO 12505 - SKIN BARRIER FOR OSTOMY AIDS - TEST METHODS |
| PD CEN/TS 14418:2014 | Geosynthetic Barriers. Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers |
| BS ISO 5598:2008 | Fluid power systems and components. Vocabulary |
| 09/30193698 DC : DRAFT JAN 2009 | BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED LAMINATED SOLID TIMBER - REQUIREMENTS |
| ISO 21550:2004 | Photography Electronic scanners for photographic images Dynamic range measurements |
| 12/30242496 DC : DRAFT MAR 2012 | BS ISO 16525-1 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 1: GENERAL TEST METHODS |
| NFX 30 441 : 2008 | WASTE - LABORATORY DETERMINATION OF THE PERMEABILITY COEFFICIENT OF A SATURATED MATERIAL - PERMEABILITY TESTS USING A RIGID WALL PERMEAMETER AT CONSTANT/VARIABLE HYDRAULIC HEAD |
| S.R. CEN/TS 16516:2013 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| BS ISO 2976:2005 | Coated abrasives. Abrasive belts. Selection of width/length combinations |
| BS ISO 18055-1:2004 | Photography and imaging. Inkjet media. Classification, nomenclature and dimensions Photo-grade media (paper and film) |
| ISO 11087:2015 | Alpine ski-bindings Retention devices Requirements and test methods |
| BS ISO 1007:2000 | Photography. 135-size film and magazine. Specifications |
| BS ISO 17398:2004 | Safety colours and safety signs. Classification, performance and durability of safety signs |
| 08/30189962 DC : 0 | BS EN 13743 - SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| BS ISO 2240:2003 | Photography. Colour reversal camera films. Determination of ISO speed |
| FD ISO 7331 : 2006 FD | SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
| BS ISO 21950:2001 | Coated abrasives. Plain discs |
| UNI EN 15812 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
| 02/102698 DC : DRAFT MAY 2002 | PREN 14417 - GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF WETTING-DRYING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
| UNE-EN ISO 9539:2011 | Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010) |
| UNI CEN/TS 16516 : 2013 | CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| 06/30140321 DC : DRAFT JULY 2006 | ISO 15242-4 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 4: RADIAL CYLINDRICAL ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE |
| CSA ISO/IEC 15457-3:09 (R2019) | Identification cards - Thin flexible cards - Part 3: Test methods (Adopted ISO/IEC 15457-3:2008, second edition, 2008-03-01) |
| UNI EN 15816 : 2011 | POLYMER-MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN |
| DIN EN ISO 10580:2012-04 | Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010) |
| BS ISO 16000-24:2009 | Indoor air Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials |
| DIN 5510-2:2009-05 | PREVENTIVE FIRE PROTECTION IN RAILWAY VEHICLES - PART 2: FIRE BEHAVIOUR AND FIRE SIDE EFFECTS OF MATERIALS AND PARTS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| BS EN ISO 1716:2010 | Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value) |
| PIMA IT3.112 : 1999 | PHOTOGRAPHICALLY ACTIVE MATERIALS - METHOD FOR IDENTIFYING |
| UNI EN 15649-1 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BIS IS 15060 : 2001(R2006) | GEOTEXTILES - TENSILE TEST FOR JOINT/SEAMS BY WIDE-WIDTH METHOD |
| BS EN 585:1995 | Gas welding equipment. Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 200 bar |
| NF EN 15812 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF CRACK BRIDGING ABILITY |
| ISO 69:1998 | Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions |
| I.S. EN ISO 8362-5:2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
| INCITS/ISO/IEC 15404 : 2008 | INFORMATION TECHNOLOGY - OFFICE MACHINES - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - FACSIMILE EQUIPMENT |
| UNI ISO 16057 : 2013 | COATED ABRASIVES - VULCANIZED FIBRE DISCS |
| ISO/TS 16840-11:2014 | Wheelchair seating Part 11: Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity |
| UNI EN 15813 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES |
| ISO 5658-4:2001 | Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
| BS EN ISO 16000-9:2006 | Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method |
| ISO 17178:2013 | Adhesives — Adhesives for bonding parquet to subfloor — Test methods and minimum requirements |
| DIN ISO 15242-4:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 4: RADIAL CYLINDRICAL ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-4:2007) |
| ISO/TS 5660-4:2016 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release |
| CEI EN 50375 : 2003 | TESTING METHODOLOGY FOR WIPERS USED IN ELECTRICAL INSULATING OIL |
| ISO 5800:1987 | Photography Colour negative films for still photography Determination of ISO speed |
| PREN 15307 : DRAFT 2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| PREN 1903 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| I.S. EN 15815:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO COMPRESSION |
| BS ISO 27447:2009 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials |
| ASTM F 2546 : 2007 : R2018 | Standard Test Method for Snowboard Step-in Bindings |
| NAPM IT2.51 : 0 | PHOTOGRAPHY - SOURCE DOCUMENT MICROFILMS DETERMINATION OF ISO SPEED AND ISO AVERAGE GRADIENT |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| ISO 5660-4:2008 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 4: Measurement of heat release for determination of low levels of combustibility |
| ISO 1009:2000 | Photography Paper dimensions Rolls for printers |
| ISO 11894-1:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes |
| ISO 16000-28:2012 | Indoor air Part 28: Determination of odour emissions from building products using test chambers |
| ISO 16000-23:2009 | Indoor air Part 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials |
| IEC PAS 62611:2009 | Vacuum cleaners for commercial use - Methods for measuring performance |
| I.S. 140-2:1987 | SCHOOL FURNITURE - PART 2: PERFORMANCE REQUIREMENTS AND TESTS FOR CHAIRS FOR SCHOOLS |
| ISO 16840-2:2018 | Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
| UNI EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| ISO/TS 22269:2005 | Reaction to fire tests — Fire growth — Full-scale test for stairs and stair coverings |
| ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
| I.S. EN 15819:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - REDUCTION OF THE THICKNESS OF THE LAYER WHEN FULLY DRIED |
| ISO 8778:2003 | Pneumatic fluid power — Standard reference atmosphere |
| IEC TR 60721-4-3:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at weatherprotected locations |
| I.S. EN 15816:2011 | POLYMER-MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - RESISTANCE TO RAIN |
| IEC TR 60721-4-0:2002 | Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction |
| DIN EN ISO 13427:2015-03 | GEOSYNTHETICS - ABRASION DAMAGE SIMULATION (SLIDING BLOCK TEST) (ISO 13427:2014) |
| DIN EN 13872:2004-04 | Method of test for smoothing and/or levelling compounds - Determination of shrinkage |
| DIN EN 14080:2013-09 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| DIN EN 1263-1:2015-03 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| DIN EN ISO 12236:2006-11 | Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
| DIN EN ISO 2503:2015-12 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR (30 MPA) (ISO 2503:2009 + AMD 1:2015) |
| BS EN 14293:2006 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| BS EN 731:1996 | Gas welding equipment. Air-aspirated hand blowpipes. Specifications and tests |
| BS EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods Determination of shrinkage and expansion |
| BS EN ISO 5172 : 2006 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS |
| BS EN 1841:1999 | Adhesives. Test methods for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| ISO 10722:2007 | Geosynthetics Index test procedure for the evaluation of mechanical damage under repeated loading Damage caused by granular material |
| BS EN 13918:2003 | Gas welding equipment. Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes. Classification, specification and tests |
| BS EN 14030:2001 | Geotextiles and geotextile-related products. Screening test method for determining the resistance to acid and alkaline liquids |
| UNE-EN 1903:2015 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
| BS EN 1724:1999 | Light conveyor belts. Test method for the determination of the coefficient of friction |
| ISO 25619-2:2015 | Geosynthetics Determination of compression behaviour Part 2: Determination of short-term compression behaviour |
| IEC 60312:2007 | Vacuum cleaners for household use - Methods of measuring the performance |
| BS EN 1391:1998 | Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification |
| EN ISO 5912:2011 | Camping tents (ISO 5912:2011) |
| ISO 7331:2011 | Ski-poles for alpine skiing Requirements and test methods |
| BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
| BS EN ISO 15711:2004 | Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water |
| BS EN ISO 13426-2:2005 | Geotextiles and geotextile-related products. Strength of internal structural junctions Geocomposites |
| BS EN 1897:2001 | Geotextiles and geotextile-related products. Determination of the compressive creep properties |
| ISO 11110:2015 | Winter-sports equipment Test devices for the setting of the functional unit ski/boot/binding Requirements and tests |
| ISO 6891:1983 | Timber structures Joints made with mechanical fasteners General principles for the determination of strength and deformation characteristics |
| BS EN 1903:2015 | Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing |
| BS EN 20187:1993 | Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| DIN EN 15307:2015-04 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| BS EN 1373:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear test |
| ISO 9864:2005 | Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products |
| EN ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006) |
| BS EN 965:1995 | Geotextiles and geotextile-related products. Determination of mass per unit area |
| BS EN 730-2:2002 | Gas welding equipment. Safety devices Not incorporating a flame (flashback) arrestor |
| BS EN 12961:2001 | Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
| BS EN 961:1996 | Gas welding equipment. Manifold regulators used in welding, cutting and allied processes up to 200 bar |
| BS EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation |
| BS EN 392:1995 | Glued laminated timber. Shear test of glue lines |
| BS EN 13851:2003 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of flexural and compressive strength |
| BS EN 927-3:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood Natural weathering test |
| BS EN 1263-1:2014 | Temporary works equipment. Safety nets Safety requirements, test methods |
| BS EN 1637:1999 | Light conveyor belts. Test methods for the measurement of the electrical resistances |
| BS EN 26891:1991 | Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics |
| BS EN ISO 7785-1:1999 | Dental handpieces High-speed air turbine handpieces |
| BS EN 29539:1992 | Specification for materials for equipment used in gas welding, cutting and allied processes |
| ISO 11498:1997 | Dental handpieces Dental low-voltage electrical motors |
| ISO 22264:2006 | Telemark ski-boots for adults Interface with Telemark ski-bindings Requirements and test methods |
| BS EN 13408:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of bond strength |
| BS EN ISO 15465:2004 | Pipework. Stripwound metal hoses and hose assemblies |
| UNE-EN ISO 10319:2015 | Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
| ISO 11416:1995 | Tennis rackets Racket components and physical parameters |
| BS EN ISO 10062:2008 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
| BS EN ISO 21530:2004 | Dentistry. Materials used for dental equipment surfaces. Determination of resistance to chemical disinfectants |
| BS EN 1718:1999 | Light conveyor belts. Test method for the measurement of the electrostatic field generated by a running light conveyor belt |
| I.S. EN 1372:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| ISO 7785-1:1997 | Dental handpieces Part 1: High-speed air turbine handpieces |
| 15/30320322 DC : 0 | BS ISO 15242-1 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS |
| UNE-EN 15307:2015 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| ISO 12236:2006 | Geosynthetics — Static puncture test (CBR test) |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| BS EN 1129-2:1995 | Furniture. Foldaway beds. Safety requirements and testing Test methods |
| ISO 3665:2011 | Photography Intra-oral dental radiographic film and film packets Manufacturer specifications |
| ISO 8362-5:2016 | Injection containers and accessories Part 5: Freeze drying closures for injection vials |
| BS EN 13057:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption |
| UNE-EN ISO 5912:2012 | Camping tents (ISO 5912:2011) |
| BS EN 522:1998 | Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification |
| BS EN 26599-1:1993 | Packaging. Sacks. Conditioning for testing. Paper sacks |
| UNE-EN 1902:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
| ISO 2503:2009 | Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) |
| BS EN ISO 3630-1:2008 | Dentistry. Root-canal instruments General requirements and test methods |
| BS EN ISO 9863-2:1996 | Geotextiles and geotextile-related products. Determination of thickness at specified pressures Procedure for determination of thickness of single layers of multilayer products |
| BS EN 15272-2:2007 | Inland navigation vessels. Rope leading Fairlead |
| ISO 15465:2004 | Pipework — Stripwound metal hoses and hose assemblies |
| ISO 10321:2008 | Geosynthetics — Tensile test for joints/seams by wide-width strip method |
| I.S. EN 13415:2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| ISO 2231:1989 | Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing |
| ISO 4090:2001 | Photography Medical radiographic cassettes/screens/films and hard-copy imaging films Dimensions and specifications |
| BS EN 1937:1999 | Test method for hydraulic setting floor smoothing and/or levelling compounds. Standard mixing procedures |
| BS EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
| ISO 22523:2006 | External limb prostheses and external orthoses — Requirements and test methods |
| ISO/TR 10722-1:1998 | Geotextiles and geotextile-related products — Procedure for simulating damage during installation — Part 1: Installation in granular materials |
| BS EN 1723:2000 | Light conveyor belts. Method of test for the determination of the relaxed elastic modulus |
| BS EN ISO 12236:2006 | Geosynthetics. Static puncture test (CBR test) |
| ISO 15344:2005 | Snowboard step-in bindings — Requirements and test methods |
| ISO 5172:2006 | Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests |
| BS EN 1372:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Peel test |
| ISO 21530:2004 | Dentistry — Materials used for dental equipment surfaces — Determination of resistance to chemical disinfectants |
| BS EN 14510:2005 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
| BS ISO 15242-1:2015 | Rolling bearings. Measuring methods for vibration Fundamentals |
| ISO 16000-10:2006 | Indoor air — Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method |
| DIN EN ISO 21530:2004-09 | Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004) |
| UNI EN ISO 5912 : 2011 | CAMPING TENTS |
| BS EN ISO 13433:2006 | Geosynthetics. Dynamic perforation test (cone drop test) |
| ISO 12836:2015 | Dentistry Digitizing devices for CAD/CAM systems for indirect dental restorations Test methods for assessing accuracy |
| I.S. EN 1373:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| BS EN 927-5:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood Assessment of the liquid water permeability |
| BS EN ISO 11143:2008 | Dental equipment. Amalgam separators |
| BS EN 730:1995 | Gas welding equipment. Equipment used in gas welding, cutting and allied processes, safety devices for fuel gases and oxygen or compressed air. General specifications, requirements and tests |
| BS EN ISO 10319:2015 | Geosynthetics. Wide-width tensile test |
| BS EN 14080:2013 | Timber structures. Glued laminated timber and glued solid timber. Requirements |
| I.S. EN 1903:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS - DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING |
| BS EN 13562:2000 | Geotextiles and geotextile-related products. Determination of resistance to penetration by water (hydrostatic pressure test) |
| ISO 13427:2014 | Geosynthetics Abrasion damage simulation (sliding block test) |
| IEC 62826:2014 | Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance |
| BS EN 14414:2004 | Geosynthetics. Screening test method for determining chemical resistance for landfill applications |
| ISO 9073-10:2003 | Textiles — Test methods for nonwovens — Part 10: Lint and other particles generation in the dry state |
| BS EN 730-1:2002 | Gas welding equipment. Safety devices Incorporating a flame (flashback) arrestor |
| UNE-EN 14574:2017 | Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics |
| UNE-EN ISO 9239-1:2011 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| BS EN ISO/IEC 11159:1998 | Information technology. Office equipment. Minimum information to be included in specification sheets. Copying machines |
| ISO 6599-1:1983 | Packaging — Sacks — Conditioning for testing — Part 1: Paper sacks |
| ISO 25619-1:2008 | Geosynthetics Determination of compression behaviour Part 1: Compressive creep properties |
| BS EN ISO 12957-2:2005 | Geotextiles. Determination of friction characteristics Inclined plane test |
| BS EN 13738:2004 | Geotextiles and geotextile-related products. Determination of pullout resistance in soil |
| DIN EN 13743:2017-04 | SAFETY REQUIREMENTS FOR COATED ABRASIVE PRODUCTS |
| DIN EN 13851:2004-02 | METHODS OF TEST FOR HYDRAULIC SETTING FLOOR SMOOTHING AND/OR LEVELLING COMPOUNDS - DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
| EN 20187:1993 | Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) |
| EN 927-5:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN ISO 10062:2008 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006) |
| EN 522 : 1998 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - BOND STRENGTH - MINIMUM REQUIREMENTS AND ADHESIVE CLASSIFICATION |
| EN ISO 3665:2013 | Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications (ISO 3665:2011) |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 730-2:2002 | Gas welding equipment - Safety devices - Part 2: Not incorporating a flame (flashback) arrestor |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN ISO 13428:2005 | Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005) |
| EN ISO 25619-2:2015 | Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015) |
| EN 927-3:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| EN 15820:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness |
| EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| EN 14510:2005 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| EN 1724 : 1998 COR 1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION |
| EN ISO/IEC 11159 : 1998 | INFORMATION TECHNOLOGY - OFFICE EQUIPMENT - MINIMUM INFORMATION TO BE INCLUDED IN SPECIFICATION SHEETS - COPYING MACHINES |
| EN ISO 16000-10:2006 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
| EN 282 : 1991 | AVALANCHE BEACONS - TRANSMITTER/RECEIVER SYSTEMS - SAFETY REQUIREMENTS AND TESTING |
| EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| EN ISO 15711:2004 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
| EN 15817:2011 | Polymer modified bituminous thick coatings for waterproofing - Water resistance |
| EN ISO 12957-2:2005 | Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005) |
| EN ISO 9863-2:1996 | Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996) |
| EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation |
| EN ISO 13433:2006 | Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006) |
| EN ISO 10773:2011 | Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011) |
| EN ISO 3630-1:2008 | Dentistry - Root-canal instruments - Part 1: General requirements and test methods (ISO 3630-1:2008) |
| EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
| EN 1937:1999 | Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures |
| EN ISO 15465:2004 | Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004) |
| EN 964-1 : 1995 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES - PART 1: SINGLE LAYERS |
| EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| EN ISO 7785-1:1999 | Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
| EN 737-4 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
| EN 15062:2006 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| EN 1841:1998 | Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| EN 965 : 1995 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF MASS PER UNIT AREA |
| EN 29539 : 1992 | SPECIFICATION FOR MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| EN ISO 13426-1:2003 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003) |
| EN 730 : 1995 | GAS WELDING EQUIPMENT - EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES, SAFETY DEVICES FOR FUEL GASES AND OXYGEN OR COMPRESSED AIR - GENERAL SPECIFICATIONS, REQUIREMENTS AND TESTS |
| EN 1722 : 1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE MAXIMUM TENSILE STRENGTH |
| EN 15815:2011 | Polymer modified bituminous thick coatings for waterproofing - Resistance to compression |
| EN 14574:2015 | Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics |
| EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
| EN 13918 : 2003 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
| EN 26599-1:1992 | Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:1983) |
| EN 16416:2013 | Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head |
| EN 14151:2010 | Geosynthetics - Determination of burst strength |
| EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| EN 15813:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures |
| EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| EN 27813:1992/AC:1992 | IDENTIFICATION CARDS - FINANCIAL TRANSACTION CARDS |
| EN 1903:2015 | Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing |
| EN ISO 13427:2014 | Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014) |
| EN 1637 : 1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE MEASUREMENT OF THE ELECTRICAL RESISTANCES |
| EN 392:1995 | Glued laminated timber - Shear test of glue lines |
| EN 15646:2009 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| EN 1392:2006 | Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
| EN ISO 12836:2015 | Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2015) |
| EN 918 : 1995 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DYNAMIC PERFORATION TEST (CONE DROP TEST) |
| EN 15272-2:2007 | Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead |
| EN 730-1:2002 | Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor |
| EN 13738:2004 | Geotextiles and geotextile-related products - Determination of pullout resistance in soil |
| EN ISO 11143:2008 | Dentistry - Amalgam separators (ISO 11143:2008) |
| EN ISO 13294:1997 | Dental handpieces - Dental air-motors (ISO 13294:1997) |
| EN ISO 21530:2004 | Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004) |
| EN ISO 10580:2012 | Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010) |
| EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| EN ISO 2231:1995 | Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989) |
| EN ISO 11498:1999 | Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997) |
| EN 1902:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
| EN ISO 13426-2:2005 | Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) |
| EN ISO 4090:2004 | Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications (ISO 4090:2004) |
| EN 731:1995 | Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests |
| EN 1723 : 1999 | LIGHT CONVEYOR BELTS - METHOD OF TEST FOR THE DETERMINATION OF THE RELAXED ELASTIC MODULUS |
| EN 927-4 : 2000 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 4: ASSESSMENT OF THE WATER-VAPOUR PERMEABILITY |
| EN 13872:2004 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change |
| EN ISO 13431:1999 | Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) |
| EN 585 : 1994 | GAS WELDING EQUIPMENT - PRESSURE REGULATORS FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 200 BAR |
| EN 13851 : 2003 | METHODS OF TEST FOR HYDRAULIC SETTING FLOOR SMOOTHING AND/OR LEVELLING COMPOUNDS - DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
| EN 961 : 1995 | GAS WELDING EQUIPMENT - MANIFOLD REGULATORS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 200 BAR |
| EN 739:1998/A1:2002 | LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
| EN 15307:2014 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| EN 1897 : 2001 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE COMPRESSIVE CREEP PROPERTIES |
| EN ISO 10321:2008 | Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008) |
| EN ISO 9073-10:2004 | Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state (ISO 9073-10:2003) |
| EN 14293:2006 | Adhesives - Adhesives for bonding parquet to subfloor - Test methods and minimum requirements |
| EN 14414:2004 | Geosynthetics - Screening test method for determining chemical resistance for landfill applications |
| EN 15818:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature |
| EN 12964:2001 | Adhesives for leather and footwear materials - Lasting adhesives - Testing heat resistance of bonds at increasing temperature |
| 04/30106618 DC : DRAFT APR 2004 | BS ISO 21179 - LIGHT CONVEYOR BELTS - TEST METHOD FOR THE MEASUREMENT OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT |
| ISO 6846:1992 | Photography Black-and-white continuous-tone papers Determination of ISO speed and ISO range for printing |
| BS ISO 11110:2015 | Winter-sports equipment. Test devices for the setting of the functional unit ski/boot/binding. Requirements and tests |
| BS ISO 491:2002 | Cinematography. 35 mm motion-picture film and magnetic film. Cutting and perforating dimensions |
| UNE-EN 15818:2011 | Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature |
| 02/709945 DC : DRAFT SEP 2002 | ISO/DIS 9236-1 - PHOTOGRAPHY - SENSITOMETRY OF SCREEN/FILM SYSTEMS FOR MEDICAL RADIOGRAPHY - PART 1: DETERMINATION OF SENSITOMETRIC CURVE SHAPE, SPEED AND AVERAGE GRADIENT |
| 03/300798 DC : DRAFT JAN 2003 | EN 13483 - HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEM - SPECIFICATION |
| BS ISO 5660-1:2015 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| NF EN 15813 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES |
| DIN ISO 11087:2016-05 | ALPINE SKI-BINDINGS - RETENTION DEVICES - REQUIREMENTS AND TEST METHODS (ISO 11087:2015) |
| DIN EN 15818:2011-06 | Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature |
| I.S. EN 13918:2003 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
| PREN 1902 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 730-2:2002 | GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 2: NOT INCORPORATING A FLAME (FLASHBACK) ARRESTOR |
| BS ISO 9523:2015 | Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods |
| I.S. EN 737-1:1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| 08/30172827 DC : DRAFT AUG 2008 | BS EN 14151 - GEOSYNTHETICS - DETERMINATION OF BURST STRENGTH |
| 14/30296443 DC : 0 | BS ISO 11087 - ALPINE SKI-BINDINGS - RETENTION DEVICES - REQUIREMENTS AND TEST METHODS |
| BS 3900-0:1989 | Methods of test for paints General introduction |
| DIN EN ISO 9539:2014-04 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010 + AMD.1:2013) |
| BS ISO 5658-4:2001 | Reaction to fire tests. Spread of flame Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
| BS EN 15818:2011 | Polymer modified bituminous thick coatings for waterproofing. Determination of dimensional stability at high temperature |
| I.S. EN ISO 13294:1998 | DENTAL HANDPIECES - DENTAL AIR-MOTORS |
| 15/30316155 DC : 0 | BS ISO 16840-2 - WHEELCHAIR SEATING - PART 2: DETERMINATION OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF DEVICES INTENDED TO MANAGE TISSUE INTEGRITY - SEAT CUSHIONS |
| BS EN ISO 10722:2007 | Geosynthetics. Index test procedure for the evaluation of mechanical damage under repeated loading. Damage caused by granular material |
| BS ISO 17178:2013 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| BS ISO 16057:2002 | Coated abrasives. Vulcanized fibre discs |
| DIN EN ISO 25619-1:2009-06 | Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008) |
| PD CEN/TS 14417:2014 | Geosynthetic barriers. Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers |
| 02/123547 DC : DRAFT SEP 2002 | BS 2782-0 - METHODS OF TESTING - PLASTICS - PART 0: INTRODUCTION |
| BS ISO 16840-6:2015 | Wheelchair seating Simulated use and determination of the changes in properties of seat cushions |
| DIN 53170:2009-08 | SOLVENTS FOR PAINTS AND VARNISHES - DETERMINATION OF THE EVAPORATION RATE |
| 05/30136487 DC : DRAFT JUL 2005 | EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| PREN 1360 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| NAPM IT2.41 : 0 | PHOTOGRAPHY - SENSITOMETRY OF SCREEN/FILM SYSTEMS FOR MEDICAL RADIOGRAPHY - PART 1: DETERMINATION OF SENSITOMETRIC CURVE SHAPE, SPEED AND AVERAGE GRADIENT |
| DIN ISO 2240:2005-10 | Photography - Colour reversal camera films - Determination of ISO speed (ISO 2240:2003) |
| 13/30275849 DC : 0 | BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| UNE-EN 15819:2011 | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
| 11/30237910 DC : 0 | BS EN 927-3 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| CSA Z323.4.12 : 0 | WHEELCHAIRS - CLIMATIC TESTS FOR ELECTRIC WHEELCHAIRS |
| BS EN ISO 12836:2015 | Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy |
| BS ISO 6:1993 | Photography. Black-and-white pictorial still camera negative film/process systems. Determination of ISO speed |
| BS EN 15813:2011 | Polymer modified bituminous thick coatings for waterproofing. Determination of flexibility at low temperatures |
| PD CEN/TS 16499:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Resistance to blocking of paints and varnishes on wood |
| 03/311846 DC : DRAFT AUG 2003 | BS ISO 16840-3 - WHEELCHAIR SEATING - PART 3: POSTURAL SUPPORT DEVICES - MEASUREMENT OF STATIC, IMPACT AND REPETITIVE LOAD STRENGTHS |
| 10/30216835 DC : 2010 | BS ISO 7331 - SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS |
| ASTM F 2494 : 2005 : R2011 | Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment (Withdrawn 2020) |
| DIN ISO 11110:2016-05 | WINTER-SPORTS EQUIPMENT - TEST DEVICES FOR THE SETTING OF THE FUNCTIONAL UNIT SKI/BOOT/BINDING - REQUIREMENTS AND TESTS (ISO 11110:2015) |
| BIS IS 16078 : 2013 | GEOSYNTHETICS - STATIC PUNCTURE TEST (CBR TEST) |
| 11/30250270 DC : 0 | BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| DIN 50014:1985-07 | CLIMATES AND THEIR TECHNICAL APPLICATION; STANDARD ATMOSPHERES |
| 91/83289 DC : DRAFT DEC 1991 | PREN 3624 - AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
| ISO 19049:2016 | Timber structures Test method Static load tests for horizontal diaphragms including floors and roofs |
| BS EN ISO 10773:2011 | Clay geosynthetic barriers. Determination of permeability to gases |
| PD ISO/TS 16840-11:2014 | Wheelchair seating Determination of perspiration dissipation characteristics of seat cushions intended to manage tissue integrity |
| 10/30216645 DC : 0 | BS EN 12226 - GEOSYNTHETICS - GENERAL TESTS FOR EVALUATION FOLLOWING DURABILITY TESTING |
| 09/30184110 DC : 0 | BS ISO 16000-25 - INDOOR AIR - PART 25: DETERMINATION OF THE EMISSION OF SEMI-VOLATILE ORGANIC COMPOUNDS BY BUILDING PRODUCTS - MICRO-CHAMBER METHOD |
| 06/30156785 DC : 0 | BS EN ISO 25619-1 - GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
| BS ISO 16840-10:2014 | Wheelchairs. Resistance to ignition of non-integrated seat and back support cushions Requirements and test methods |
| ISO 3029:1995 | Photography 126-size cartridges Dimensions of cartridge, film and backing paper |
| ISO 16067-2:2004 | Photography - Electronic scanners for photographic images - Spatial resolution measurements Part 2: Film scanners |
| 14/30280574 DC : 0 | BS ISO 16840-10 - WHEELCHAIR - RESISTANCE TO IGNITION OF NON-INTEGRATED SEAT AND BACK SUPPORT CUSHIONS - PART 10: REQUIREMENTS AND TEST METHODS |
| NF ENV ISO 10722-1 : 98 XP | GEOTEXTILES AND GEOTEXTILES RELATED PRODUCTS - PROCEDURE FOR SIMULATING DAMAGE DURING INSTALLATION - PART 1: INSTALLATION IN GRANULAR MATERIALS |
| 12/30258159 DC : 0 | BS EN 16402 - PAINT AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| PD CEN/TS 16700:2014 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of resistance to impact of a coating on a wooden substrate |
| DIN ISO 11040-4:2007-10 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| 06/30149088 DC : DRAFT SEP 2006 | ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| BS EN 15812:2011 | Polymer modified bituminous thick coatings for waterproofing. Determination of crack bridging ability |
| BS EN 62885-3:2015 | Surface cleaning appliances Wet carpet cleaning appliances. Methods for measuring the performance |
| BS EN 16416:2013 | Geosynthetic clay barriers. Determination of water flux index. Flexible wall permeameter method at constant head |
| 04/30113213 DC : 0 | EN 14591-3 - EXPLOSION PROTECTION IN UNDERGROUND MINING - PROTECTIVE SYSTEMS - PART 3: WATER TROUGHS FOR EXPLOSION BARRIERS |
| ISO 12957-1:2005 | Geosynthetics Determination of friction characteristics Part 1: Direct shear test |
| 13/30246948 DC : 0 | BS ISO 17554 - REACTION TO FIRE TESTS - MASS LOSS MEASUREMENT |
| BS EN 15817:2011 | Polymer modified bituminous thick coatings for waterproofing. Water resistance |
| 15/30328599 DC : 0 | BS ISO 1099 - METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD |
| NF EN 15820 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF WATERTIGHTNESS |
| BS ISO 18560-1:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment Removal of formaldehyde |
| BS EN ISO 25619-1:2008 | Geosynthetics. Determination of compression behaviour Compressive creep properties |
| BS ISO 3772:2000 | Photography. Rolls of sensitized material for the pre-press industry. Dimensions and related requirements |
| FD X07 008 : 2008 FD | METROLOGY - ARBORESCENCE OF STANDARDS AND WORK ON METROLOGY ('ROAD MAP' OF STANDARDS) |
| I.S. EN 15813:2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DETERMINATION OF FLEXIBILITY AT LOW TEMPERATURES |
| ISO 5175-1:2017 | Gas welding equipment — Safety devices — Part 1: Devices incorporating a flame (flashback) arrestor |
| BS ISO 14697:2007 | Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products |
| 06/30149441 DC : DRAFT SEP 2006 | ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
| 16/30333769 DC : DRAFT JAN 2016 | BS EN ISO 5175-2 - GAS WELDING EQUIPMENT - SAFETY DEVICES - PART 2: NOT INCORPORATING A FLAME (FLASHBACK) ARRESTOR |
| ISO 11040-4:2015 | Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| NFP 84 503 : 2008 XP | GEOMEMBRANES - GEOMEMBRANES LINING SYSTEMS - DETERMINATION OF BIAXIAL TENSILE STRENGTH |
| ISO 14697:2007 | Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products |
| BS ISO 5912 : 2003 AMD 15519 | CAMPING TENTS |
| 01/648266 DC : DRAFT MAY 2001 | ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| I.S. EN ISO 25619-2:2015 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR (ISO 25619-2:2015) |
| BS 7650:1993 | Specification for pressure regulators used in welding, cutting and related processes with compressed gases up to 300 bar |
| NFX 08 050-1 : 2003 | PHOTOLUMINESCENT SAFETY SYSTEMS - PART 1: GENERAL RULES |
| 04/30115437 DC : 0 | ISO 5598 - FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
| CEN/TS 16360:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate |
| CSA ISO/IEC 15457-3 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| ISO 14807:2001 | Photography Transmission and reflection densitometers Method for determining performance |
| DIN EN ISO 25619-2:2015-12 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR (ISO 25619-2:2015) |
| DIN EN ISO 9012:2011-12 | Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2008) |
| S.R. CEN/TS 14418:2014 | GEOSYNTHETIC BARRIERS - TEST METHOD FOR THE DETERMINATION OF THE INFLUENCE OF FREEZING-THAWING CYCLES ON THE PERMEABILITY OF CLAY GEOSYNTHETIC BARRIERS |
| I.S. EN ISO 12836:2015 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| NFP 84 705 : 2008 | GEOSYNTHETIC BARRIERS - DETERMINATION OF THE SWELLING, FLOW AND PERMEABILITY CHARACTERISTICS OF GEOSYSNTHETIC CLAY LINERS (GCL) USING AN OEDOPERMEAMETER - CHARACTERISATION TEST AND PERFORMANCE TEST |
| NF ISO 3366 : 1999 | COATED ABRASIVE PRODUCTS - ABRASIVE ROLLS |
| ONORM EN ISO 25619-1 : 2009 | GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 1: COMPRESSIVE CREEP PROPERTIES |
| UNE-EN 14151:2010 | Geosynthetics - Determination of burst strength |
| ISO/TS 16840-12:2015 | Wheelchair seating Part 12: Apparatus and method for cushion envelopment testing |
| ISO 15635:2001 | Coated abrasives Flap discs |
| DIN ISO 16000-24:2013-01 | INDOOR AIR - PART 24: PERFORMANCE TEST FOR EVALUATING THE REDUCTION OF VOLATILE ORGANIC COMPOUND (EXCEPT FORMALDEHYDE) CONCENTRATIONS BY SORPTIVE BUILDING MATERIALS (ISO 16000-24:2009) |
| ISO 3366:1999 | Coated abrasives Abrasive rolls |
| PREN 927-3 : DRAFT 2011 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| ISO 11312:2000 | Photography Sheets of sensitized material for the pre-press industry Dimensions and related requirements |
| UNE-EN 16402:2014 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
| ISO 14548:1998 | Photography Dimensions of glass plates |
| NFX 07 008 : 2008 FD | METROLOGY - ARBORESCENCE OF STANDARDS AND WORK ON METROLOGY ("ROAD MAP" OF STANDARDS) |
| UNI EN 15819 : 2011 | POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - REDUCTION OF THE THICKNESS OF THE LAYER WHEN FULLY DRIED |
| I.S. EN 62885-3:2015 | SURFACE CLEANING APPLIANCES - PART 3: WET CARPET CLEANING APPLIANCES - METHODS FOR MEASURING THE PERFORMANCE |
| BS EN ISO 5175-1:2017 | Gas welding equipment. Safety devices Devices incorporating a flame (flashback) arrestor |
| UNE-EN 15816:2011 | Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain |
| IEC TR 60721-4-6:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment |
| EN 60312-1:2017 | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| PREN 13419-1 : DRAFT 2002 | BUILDING PRODUCTS - DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - PART 1: EMISSION TEST CHAMBER METHOD |
| EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
| ISO 28620:2010 | Medical devices Non-electrically driven portable infusion devices |
| ISO 16525-2:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 2: Determination of electrical characteristics for use in electronic assemblies |
| ASTM D 7143 : 2017 : REDLINE | Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products |
| ISO 16000-30:2014 | Indoor air — Part 30: Sensory testing of indoor air |
| NF ISO 5355 : 2006 | ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 12957-1:2005 | Geotextiles. Determination of friction characteristics Direct shear test |
| IEC TR 60721-4-7:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use |
| ISO 15739:2017 | Photography — Electronic still-picture imaging — Noise measurements |
| ISO 1008:1992 | Photography — Paper dimensions — Pictorial sheets |
| ISO 16525-1:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 1: General test methods |
| ISO 9957-3:1997 | Fluid draughting media Part 3: Water-based coloured draughting inks Requirements and test conditions |
| I.S. EN ISO 9012:2011 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS (ISO 9012:2008) |
| I.S. EN 60312:2008 | VACUUM CLEANERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE |
| ONORM EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| UNE-EN ISO 2503:2010 | Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009) |
| DIN EN 14591-2:2007-07 | Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers |
| DIN EN ISO 16000-10:2006-06 | Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
| DIN EN ISO 10319:2015-09 | GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
| BS EN ISO 2231:1995 | Rubber- or plastics-coated fabrics. Standard atmospheres for conditioning and testing |
| BS EN 13415:2002 | Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films |
| BS EN ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Extraction of soluble contaminants for analysis. The Bresle method |
| UNE-EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| BS EN 13872:2004 | Method of test for smoothing and/or levelling compounds. Determination of dimensional change |
| ISO 10319:2015 | Geosynthetics — Wide-width tensile test |
| BS EN 13200-4:2006 | Spectator facilities Seats. Product characteristics |
| BS EN ISO 16000-10:2006 | Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method |
| ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
| BS EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
| ISO 13294:1997 | Dental handpieces Dental air-motors |
| I.S. EN ISO 5912:2011 | CAMPING TENTS (ISO 5912:2011) |
| BS EN 13238:2010 | Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates |
| BS EN 14574:2015 | Geosynthetics. Determination of the pyramid puncture resistance of supported geosynthetics |
| BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
| BS EN 13409:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of setting time |
| BS EN ISO 9239-1:2010 | Reaction to fire tests for floorings Determination of the burning behaviour using a radiant heat source |
| BS EN ISO 13427:2014 | Geosynthetics. Abrasion damage simulation (sliding block test) |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| BS EN 737-1:1998 | Medical gas pipeline systems Terminal units for compressed medical gases and vacuum |
| BS EN 918:1996 | Geotextiles and geotextile-related products. Dynamic perforation test (Cone drop test) |
| DIN EN ISO 13426-1:2003-08 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS |
| BS EN 13999-1:2013 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application General procedure |
| ISO 3630-1:2008 | Dentistry Root-canal instruments Part 1: General requirements and test methods |
| EN 62885-3:2015 | Surface cleaning appliances - Part 3: Wet carpet cleaning appliances - Methods for measuring the performance |
| CEN/TS 16516:2013 | Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air |
| DIN EN ISO 16000-9:2008-04 | Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006) |
| DIN EN ISO 5912:2013-08 | CAMPING TENTS (ISO 5912:2011) |
| ONORM ONR CEN/TS 16360 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE (CEN/TS 16360:2012) |
| EN 13562:2000 | Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test) |
| ONORM ISO 7331 : 2012 | SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS (ISO 7331:2011) |
| EN 50375:2002 | Testing methodology for wipers used in electrical insulating oil |
| EN 60312:2008 | Vacuum cleaners for household use - Methods of measuring the performance |
| DIN EN 14510:2005-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| DIN EN 13918:2003-08 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| DIN EN ISO 9073-10:2005-03 | TEXTILES - TEST METHODS FOR NONWOVENS - PART 10: LINT AND OTHER PARTICLES GENERATION IN THE DRY STATE |
| CEN/TS 16700:2014 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate |
| EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
| DIN EN 13738:2005-02 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF PULLOUT RESISTANCE IN SOIL |
| DIN ISO 5912:2004-05 | CAMPING TENTS |
| CEN/TS 14418:2014 | Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers |
| DIN EN ISO 4090:2004-08 | Photography - Medical radiographic cassettes/screens/films and hard-copy imaging films - Dimensions and specifications (ISO 4090:2001) |
| DIN EN ISO 13428:2005-05 | Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005) |
| DIN EN 14030:2003-11 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO ACID AND ALKALINE LIQUIDS |
| EN 12523 : 1999 | EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
| EN 1244:1998 | Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| CEN/TS 14417:2014 | Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers |
| EN 13200-4:2006 | Spectator facilities - Part 4: Seats - Product characteristics |
| CEN/TR 13259:2013 | Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes |
| DIN ISO 5800:2003-11 | PHOTOGRAPHY - COLOUR NEGATIVE FILMS FOR STILL PHOTOGRAPHY - DETERMINATION OF ISO SPEED |
| DIN ISO 6106:2015-11 | ABRASIVE PRODUCTS - CHECKING THE GRAIN SIZE OF SUPERABRASIVES (ISO 6106:2013) |
| DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| DIN ISO 11040-4:2017-07 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| DIN EN 14414:2004-08 | Geosynthetics - Screening test method for determining chemical resistance for landfill applications |
| DIN EN ISO 15711:2005-03 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
| DIN EN 16402:2014-02 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| DIN EN ISO 15465:2004-07 | Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004) |
| CEN/TS 16359:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings |
| DIN EN ISO 3630-1:2008-04 | DENTISTRY - ROOT-CANAL INSTRUMENTS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| DIN ISO 22264:2007-01 | TELEMARK SKI-BOOTS FOR ADULTS - INTERFACE WITH TELEMARK SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15646:2009-07 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 5172:2015-12 | GAS WELDING EQUIPMENT - BLOWPIPES FOR GAS WELDING, HEATING AND CUTTING - SPECIFICATIONS AND TESTS (ISO 5172:2006 + AMD 1:2012 + AMD 2:2015) |
| BS 3424-2(1992) : 1992 AMD 8189 | TESTING COATED FABRICS - METHOD 4. PRE-CONDITIONING AND CONDITIONING OF COATED FABRICS FOR TESTING PURPOSES |
| ONORM EN ISO 9012 : 2011 | GAS WELDING EQUIPMENT - AIR-ASPIRATED HAND BLOWPIPES - SPECIFICATIONS AND TESTS (ISO 9012:2008) |
| BS 5550-3.1.1:1993 | Cinematography. 35 mm film. Raw stock Specification for the cutting and perforating dimensions of 35 mm motion-picture film and magnetic film |
| ONORM EN ISO 13426-2 : 2005 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 2: GEOCOMPOSITES |
| I.S. EN ISO 13426-2:2005 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 2: GEOCOMPOSITES |
| NF EN ISO 13426-2 : 2005 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 2: GEOCOMPOSITES |
| PREN 6095 : 200P1 | AEROSPACE SERIES - ROTARY FASTENERS - STRUCTURAL AND NON-STRUCTURAL APPLICATIONS - TECHNICAL SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.