ISO 4520:1981
Current
Current
The latest, up-to-date edition.
Chromate conversion coatings on electroplated zinc and cadmium coatings
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
10-01-1981
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies requirements relating to coatings intended to give protection against corrosion. Finishes for giving particular colours only or specifically to improve paint adhesion are not covered by this International Standard. Gives furhermore the method of application of chromate conversion coatings and a classification.
| DevelopmentNote |
Also numbered as BS 6338(1982) (09/2005)
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| UNE 112050:1994 | Identical |
| SNV ISO 4520 : 1981 | Identical |
| NBN EN 286-4 : 1994 | Identical |
| NBN EN 28738 : 1992 | Identical |
| UNI ISO 4520 : 1987 | Identical |
| NBN EN 28736 : 1992 | Identical |
| NBN EN 28737 : 1992 | Identical |
| NS ISO 4520 : 1ED 1992 | Identical |
| I.S. EN 13126-16:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 16: HARDWARE FOR LIFT&SLIDE WINDOWS AND DOORS |
| ISO 13412:1997 | Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Inch series |
| BS EN 22338:1992 | Parallel pins, unhardened |
| DIN EN 13126-14:2012-08 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 14: Sash fasteners |
| BS 7051(1989) : AMD 7492 | SPECIFICATION FOR HALF-LENGTH TAPER GROOVED PINS |
| BS ISO 8535-1:2016 | Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes |
| DIN 258:2012-05 | Taper pins with thread ends and constant taper lengths |
| 09/30195818 DC : DRAFT JULY 2009 | BS EN ISO 3613 - METALLIC AND OTHER INORGANIC COATINGS - CHROMATE CONVERSION COATINGS ON ZINC, CADMIUM, ALUMINIUM-ZINC ALLOYS AND ZINC-ALUMINIUM ALLOYS - TEST METHODS |
| 15/30284318 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
| ISO 13414:1997 | Aerospace — Airframe needle roller bearings, single-row, shielded — Inch series |
| ISO 8535-1:2016 | Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes |
| UNE-EN 13126-8:2018 | Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware |
| BS EN 2535:2011 | Aerospace series. Vacuum deposition of cadmium |
| DIN EN 13126-10:2009-02 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 10: ARM-BALANCING SYSTEMS |
| ISO 14197:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty — Inch series |
| ISO 14212:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty — Inch series |
| BS 7049(1989) : AMD 7490 | SPECIFICATION FOR HALF-LENGTH CENTRE GROOVED PINS |
| DD CEN/TS 13126-8:2004 | Building hardware, fittings for windows and door height windows. Requirements and test methods Tilt & turn, Tilt-First and Turn-Only hardware |
| PREN 13126-8 : DRAFT 2016 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 8: REQUIREMENTS AND TEST METHODS FOR TILT & TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| BS ISO 8535-2:2003 | Compression ignition engines. Steel tubes for high pressure fuel injection pipes Requirements for composite tubes |
| 07/30174321 DC : 0 | BS EN ISO 11130 - CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| 93/706720 DC : 0 | PREN 2535 - AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| BS EN 28733:1992 | Parallel pins with internal thread, unhardened |
| I.S. EN 13126-13:2012 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND BALCONY DOORS - REQUIREMENTS AND TEST METHODS - PART 13: SASH BALANCES |
| BS 5516-1:2004 | Patent glazing and sloping glazing for buildings Code of practice for design and installation of sloping and vertical patent glazing |
| PREN 2133 : 200P1 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN 2535:2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| BS 7479:1991 | Method for salt spray corrosion tests in artificial atmospheres |
| NF EN 13126-4 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 4: ESPAGNOLETTES |
| ONORM EN 13126-6 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| BS EN 13126-8:2017 | Building hardware. Hardware for windows and door height windows Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware |
| BS EN 13126-17:2008 | Building hardware. Requirements and test methods for windows and doors height windows Hardware for Tilt&Slide windows and doors |
| EN 13126-16:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 16: Hardware for Lift&Slide windows and doors |
| ISO 14193:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty — Inch series |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| BS EN ISO 4042:2000 | Fasteners. Electroplated coatings |
| ISO 14217:1998 | Aerospace — Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty — Inch series |
| DIN EN 1670:2007-06 | Building hardware - Corrosion resistance - Requirements and test methods |
| DIN EN 22339:1992-10 | UNHARDENED TAPER PINS |
| DIN EN 22340:1992-10 | CLEVIS PINS WITHOUT HEAD |
| DIN EN ISO 10062:2008-04 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006) |
| UNE-EN ISO 3613:2011 | Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010) |
| BS EN ISO 15980:2002 | Open end blind rivets with break pull mandrel and countersunk head. St/St |
| BS EN ISO 3613:2010 | Metallic and other inorganic coatings. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods |
| EN 2133:2010 | Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys |
| I.S. EN 13126-1:2011 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE |
| DIN EN 13126-16:2008-04 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 16: HARDWARE FOR LIFT&SLIDE WINDOWS AND DOORS |
| EN 13126-1:2011 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware |
| EN 13126-19:2011 | Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices |
| CEN/TS 13126-8:2004 | Building hardware, fittings for windows and door height windows - Requirements and test procedures - Part 8: Tilt & turn, Tilt-First and Turn-Only hardware |
| EN 13126-13:2012 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances |
| EN 13126-11:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware |
| EN 13126-14:2012 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 14: Sash fasteners |
| EN 13126-4:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes |
| BS 4873:2004 | Aluminium alloy windows |
| UNI EN 13126-1 : 2012 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE |
| ISO 13415:1997 | Aerospace — Airframe needle track roller, stud type, single-row, sealed — Inch series |
| 10/30218923 DC : DRAFT JUNE 2010 | BS EN 13126-1 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST METHODS - PART 1: REQUIREMENTS COMMON TO ALL TYPES OF HARDWARE |
| DIN EN 13126-13:2012-08 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances |
| BS 7052(1989) : AMD 7493 | SPECIFICATION FOR ROUND HEAD GROOVED PINS |
| ISO 14203:1998 | Aerospace — Airframe ball bearings, single-row, rigid, diameter series 8 and 9 — Metric series |
| BS ISO 22778:2006 | Metallic coatings. Physical vapour-deposited coatings of cadmium on iron and steel. Specification and test methods |
| BS EN 13126-4:2008 | Building hardware. Requirements and test methods for windows and doors height windows Espagnolettes |
| 07/30171995 DC : 0 | BS ISO 15726 - ELECTRODEPOSITED COATINGS AND RELATED FINISHES - ELECTROPLATED ZINC ALLOYS WITH NICKEL, COBALT OR IRON |
| BS 7050(1989) : AMD 7491 | SPECIFICATION FOR FULL-LENGTH TAPER GROOVED PINS |
| NF ISO 22778 : 2007 | METALLIC COATINGS - PHYSICAL VAPOUR-DEPOSITED COATINGS OF CADMIUM ON IRON AND STEEL - SPECIFICATION AND TEST METHODS |
| BS 7045(1989) : AMD 7486 | SPECIFICATION FOR FULL-LENGTH PARALLEL GROOVED PINS, WITH PILOT |
| BS 7055(1989) : AMD 7496 | SPECIFICATION FOR HARDENED PARALLEL PINS (DOWEL PINS) |
| PREN 2535 : 200P1 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| ISO 14201:1998 | Aerospace — Airframe ball bearings, double-row, self-aligning, diameter series 2 — Metric series |
| ISO 14192:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty — Metric series |
| ISO 22778:2006 | Metallic coatings — Physical vapour-deposited coatings of cadmium on iron and steel — Specification and test methods |
| UNI EN 13126-15 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND SLIDING FOLDING WINDOWS AND DOORS |
| UNI EN 13126-6 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| I.S. TS 13126-8:2004 | BUILDING HARDWARE, FITTINGS FOR WINDOWS AND DOOR HEIGHT WINDOWS - REQUIREMENTS AND TEST PROCEDURES - PART 8: TILT & TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| ISO 14214:1998 | Aerospace — Airframe ball bearings, double-row, rigid, sealed, heavy duty — Inch series |
| BS EN 13126-15:2008 | Building hardware. Requirements and test methods for windows and doors height windows Rollers for horizontal sliding and sliding folding windows and doors |
| UNI EN ISO 11130 : 2010 | CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| ISO 8737:1986 | Taper pins with external thread, unhardened |
| BS EN ISO 15976:2002 | Closed end blind rivets with break pull mandrel and protruding head. St/St |
| BS EN 22339:1992 | Taper pins, unhardened |
| UNE-EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| I.S. EN 2133:2010 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN ISO 10062:2008 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERE AT VERY LOW CONCENTRATIONS OF POLLUTING GAS(ES) |
| UNI EN 2133 : 2011 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN ISO 9227:2017 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017) |
| I.S. EN ISO 3613:2010 | METALLIC AND OTHER INORGANIC COATINGS - CHROMATE CONVERSION COATINGS ON ZINC, CADMIUM, ALUMINIUM-ZINC ALLOYS AND ZINC-ALUMINIUM ALLOYS - TEST METHODS |
| I.S. EN 1670:2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| DIN EN 22341:1992-10 | CLEVIS PINS WITH HEAD |
| 07/30160471 DC : 0 | BS EN 14648 - BUILDING HARDWARE - FITTINGS FOR SHUTTERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 28742:1992-10 | THIRD-LENGTH CENTRE GROOVED PINS |
| ISO 17613-1:2006 | Manually operated pumps for drinking water Selection and acceptance Part 1: Southeast Asia |
| UNI EN 13126-10 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 10: ARM-BALANCING SYSTEMS |
| ISO 14208:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, intermediate duty — Inch series |
| ISO 14206:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, light duty — Inch series |
| BS EN 13126-19:2011 | Building hardware. Requirements and test methods for windows and door height windows Sliding closing devices |
| DIN EN 13126-4:2009-01 | Building hardware - Requirements and test methods for windows and doors height windows - Part 4: Espagnolettes |
| UNI EN 13126-19 : 2011 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 19: SLIDING CLOSING DEVICES |
| BS EN 13126-12:2008 | Building hardware. Requirements and test methods for windows and doors height windows Side hung projecting reversible hardware |
| BS 7056(1989) : AMD 7497 | SPECIFICATION FOR HARDENED PARALLEL PINS WITH INTERNAL THREAD |
| BS EN 13126-6:2008 | Building hardware. Requirements and test methods for windows and doors height windows Variable geometry stay hinges (with or without a friction stay) |
| 09/30207944 DC : 0 | BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| BS ISO 17613-1:2006 | Manually operated pumps for drinking water. Selection and acceptance Southeast Asia |
| UNE-EN 13126-11:2010 | Building hardware - Requirements and test methods for windows and doors height windows - Part 11: Top hung projecting reversible hardware |
| 03/317245 DC : DRAFT OCT 2003 | ISO 22778 - METALLIC COATINGS - VAPOUR DEPOSITED COATINGS OF CADMIUM ON IRON AND STEEL - SPECIFICATION AND TEST METHODS |
| UNE-EN 13126-13:2013 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 13: Sash balances |
| I.S. EN 13126-10:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 10: ARM-BALANCING SYSTEMS |
| ISO 14194:1998 | Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty — Inch series |
| I.S. EN 13126-8:2017 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 8: REQUIREMENTS AND TEST METHODS FOR TILT AND TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| NF EN 13126-17 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 17: HARDWARE FOR TILT AND SLIDE WINDOWS AND DOORS |
| I.S. EN 13126-15:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND SLIDING FOLDING WINDOWS AND DOORS |
| DIN EN ISO 4042:2001-01 | FASTENERS - ELECTROPLATED COATINGS |
| UNE-EN 13126-19:2011 | Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices |
| EN 13126-17:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 17: Hardware for Tilt&Slide windows and doors |
| ISO 14204:1998 | Aerospace — Airframe ball bearings, double-row, rigid, diameter series 0 — Metric series |
| UNI EN 13126-17 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 17: HARDWARE FOR TILT & SLIDE WINDOWS AND DOORS |
| DIN EN 13126-1:2012-02 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware |
| ISO 14196:1998 | Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty — Inch series |
| I.S. EN 13126-4:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 4: ESPAGNOLETTES |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| UNE-EN 13126-1:2012 | Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of hardware |
| ISO 10062:2006 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
| EN ISO 15980:2002 | Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002) |
| ONORM EN 2535 : 2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| UNI EN ISO 10062 : 2008 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERE AT VERY LOW CONCENTRATIONS OF POLLUTING GAS(ES) |
| UNI EN 1670 : 2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| ISO 15726:2009 | Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron |
| DIN EN 13126-6:2009-02 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| 01/713017 DC : DRAFT SEP 2001 | ISO/CD 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (REVISED) |
| UNI EN 13126-12 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 12: SIDE HUNG PROJECTING REVERSIBLE HARDWARE |
| 16/30335086 DC : 0 | BS EN 13126-8 - BUILDING HARDWARE - HARDWARE FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 8: REQUIREMENTS AND TEST METHODS FOR TILT & TURN, TILT-FIRST AND TURN-ONLY HARDWARE |
| NF EN 13126-19 : 2011 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 19: SLIDING CLOSING DEVICES |
| BS EN 13126-14:2012 | Building hardware. Hardware for windows and balcony doors. Requirements and test methods Sash fasteners |
| BS EN 13126-10:2008 | Building hardware. Requirements and test methods for windows and doors height windows Arm-balancing systems |
| 10/30215691 DC : DRAFT NOV 2010 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| I.S. EN 13126-12:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 12: SIDE HUNG PROJECTING REVERSIBLE HARDWARE |
| DIN ISO 4042:1992-06 | THREADED COMPONENTS - ELECTROPLATED COATINGS |
| 16/30339916 DC : 0 | BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| 04/30109383 DC : DRAFT MAY 2004 | ISO 8535-1 - COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| I.S. EN 13126-6:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 6: VARIABLE GEOMETRY STAY HINGES (WITH OR WITHOUT A FRICTION STAY) |
| ISO 13417:1997 | Aerospace — Airframe needle track roller, stud type, single-row, sealed — Metric series |
| I.S. EN 13126-14:2012 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND BALCONY DOORS - REQUIREMENTS AND TEST METHODS - PART 14: SASH FASTENERS |
| BS 7047(1989) : AMD 7488 | SPECIFICATION FOR HALF-LENGTH REVERSE TAPER GROOVED PINS |
| EN ISO 3613:2010 | Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010) |
| 17/30366369 DC : 0 | BS EN 2133 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| BS ISO 15726:2009 | Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron |
| 09/30185848 DC : 0 | BS EN 13126-19 - BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 19: SLIDING CLOSING DEVICES |
| ONORM EN 13126-17 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 17: HARDWARE FOR TILT&SLIDE WINDOWS AND DOORS |
| DIN EN 13126-11:2009-02 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 11: TOP HUNG PROJECTING REVERSIBLE HARDWARE |
| ISO 13413:1997 | Aerospace — Airframe needle track roller, yoke type, double-row, sealed — Inch series |
| I.S. EN 13126-11:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 11: TOP HUNG PROJECTING REVERSIBLE HARDWARE |
| UNE-EN 13126-14:2013 | Building hardware - Hardware for windows and balcony doors - Requirements and test methods - Part 14: Sash fasteners |
| I.S. EN ISO 4042:1999 | FASTENERS - ELECTROPLATED COATINGS |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| NF EN ISO 4042 : 1999 | FASTENERS - ELECTROPLATED COATINGS |
| ISO 14191:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 — Metric series |
| UNI EN 13126-16 : 2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 16: HARDWARE FOR LIFT & SLIDE WINDOWS AND DOORS |
| EN 13126-15:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 15: Rollers for horizontal sliding and sliding folding windows and doors |
| ONORM EN ISO 3613 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - CHROMATE CONVERSION COATINGS ON ZINC, CADMIUM, ALUMINIUM-ZINC ALLOYS AND ZINC-ALUMINIUM ALLOYS - TEST METHODS |
| UNE-EN 13126-12:2010 | Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware |
| ISO 14216:1998 | Aerospace — Airframe ball bearings, double-row, self-aligning, sealed, heavy duty — Inch series |
| EN 13126-8:2017 | Building hardware - Hardware for windows and door height windows - Part 8: Requirements and test methods for Tilt and Turn, Tilt-First and Turn-Only hardware |
| ISO 14210:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty — Inch series |
| I.S. EN 13126-19:2011 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOOR HEIGHT WINDOWS - PART 19: SLIDING CLOSING DEVICES |
| ISO 14195:1998 | Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty — Inch series |
| ISO 14211:1998 | Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty — Inch series |
| DIN EN 28738:1992-10 | PLAIN WASHERS FOR CLEVIS PINS - PRODUCT GRADE A |
| BS EN 13126-1:2011 | Building hardware. Hardware for windows and door height windows. Requirements and test methods Requirements common to all types of hardware |
| BS EN 14648:2007 | Building hardware. Fittings for shutters. Requirements and test methods |
| BS EN 22341:1992 | Clevis pins with head |
| ISO 15980:2002 | Open end blind rivets with break pull mandrel and countersunk head — St/St |
| BS EN ISO 10062:2008 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
| ISO 8738:1986 | Plain washers for clevis pins Product grade A |
| ISO 2341:1986 | Clevis pins with head |
| ISO 15979:2002 | Open end blind rivets with break pull mandrel and protruding head — St/St |
| ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
| BS EN 28738:1992 | Plain washers for clevis pins. Product grade A |
| BS EN ISO 9227:2017 | Corrosion tests in artificial atmospheres. Salt spray tests |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| ISO 15976:2002 | Closed end blind rivets with break pull mandrel and protruding head — St/St |
| BS EN 2133:2010 | Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys |
| EN ISO 10062:2008 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006) |
| EN ISO 15976:2002 | Closed end blind rivets with break pull mandrel and protrudiing head - St/St (ISO 15976:2002) |
| EN 14648:2007 | Building hardware - Fittings for shutters - Requirements and test methods |
| EN ISO 15979:2002 | Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002) |
| EN 28733 : 1992 | PARALLEL PINS WITH INTERNAL THREAD, UNHARDENED |
| EN 22340:1992 | Clevis pins without head (ISO 2340:1986) |
| EN 28736:1992 | Taper pins with internal thread, unhardened (ISO 8736:1986) |
| EN 28737:1992 | Taper pins with external thread, unhardened (ISO 8737:1986) |
| EN 22338:1992/AC:1992 | PARALLEL PINS, UNHARDENED |
| EN 2535:2011 | Aerospace series - Vacuum deposition of cadmium |
| EN 28738:1992 | Plain washers for clevis pins - Product grade A (ISO 8738:1986) |
| EN 22341:1992 | Clevis pins with head (ISO 2341:1986) |
| EN 286-4:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 22339:1992 | Taper pins, unhardened (ISO 2339:1986) |
| BS 7046(1989) : AMD 7487 | SPECIFICATION FOR FULL-LENGTH PARALLEL GROOVED PINS, WITH CHAMFER |
| ISO 14209:1998 | Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty — Inch series |
| BS EN 13126-13:2012 | Building hardware. Hardware for windows and balcony doors. Requirements and test methods Sash balances |
| 12/30249839 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
| BS EN 13126-11:2008 | Building hardware. Requirements and test methods for windows and doors height windows Top hung projecting reversible hardware |
| DIN EN 13126-19:2011-05 | Building hardware - Requirements and test methods for windows and door height windows - Part 19: Sliding Closing Devices |
| 16/30339983 DC : 0 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| BS 7053(1989) : AMD 7494 | SPECIFICATION FOR COUNTERSUNK HEAD GROOVED PINS |
| UNI EN 2535 : 2012 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| BS 7048(1989) : AMD 7489 | SPECIFICATION FOR THIRD-LENGTH CENTRE GROOVED PINS |
| 09/30185845 DC : 0 | BS EN 13126-5 - BUILDING HARDWARE - SPECIFICATIONS FOR THE FITTINGS FOR THE OPERATION OF WINDOWS AND DOOR HEIGHT WINDOWS - PART 5: SPECIFICATION FOR DEVICES THAT RESTRICT THE OPENING OF WINDOWS |
| 17/30346602 DC : 0 | BS EN ISO 11130 - CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| ISO/TR 15922:2011 | Metallic and other inorganic coatings Evaluation of properties of dark-stain phenomenon of chromated coiled or sheet product |
| UNI EN 13126-14 : 2012 | BUILDING HARDWARE - HARDWARE FOR WINDOWS AND BALCONY DOORS - REQUIREMENTS AND TEST METHODS - PART 14: SASH FASTENERS |
| I.S. EN 13126-17:2008 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 17: HARDWARE FOR TILT&SLIDE WINDOWS AND DOORS |
| ISO 13416:1997 | Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Metric series |
| UNI EN ISO 3613 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - CHROMATE CONVERSION COATINGS ON ZINC, CADMIUM, ALUMINIUM-ZINC ALLOYS AND ZINC- ALUMINIUM ALLOYS - TEST METHODS |
| DIN EN 13126-12:2009-03 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 12: SIDE HUNG PROJECTING REVERSIBLE HARDWARE |
| SAE J 1648 : 2013 | PROTECTIVE COATINGS FOR FASTENERS |
| UNE-EN ISO 11130:2011 | Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2010) |
| DIN EN ISO 11130:2010-12 | CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION |
| ISO 14202:1998 | Aerospace — Airframe ball bearings, single-row, rigid, diameter series 0 and 2 — Metric series |
| BS EN 13126-16:2008 | Building hardware. Requirements and test methods for windows and doors height windows Hardware for Lift&Slide windows and doors |
| UNI EN 13126-13 : 2012 | Building hardware - Hardware for windows and door-height windows - Requirements and test methods - Part 3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-Only hardware |
| UNI EN 13126-11 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 11: TOP HUNG PROJECTING REVERSIBLE HARDWARE |
| NF EN 2535 : 2012 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| GOST 9-302 : 1988 ERRATA 2007 | UNIFIED SYSTEM OF CORROSION AND AGEING PROTECTION - METAL AND NON-METAL INORGANIC COATINGS - CONTROL METHODS |
| UNI EN 13126-4 : 2009 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 4: ESPAGNOLETTES |
| EN 13126-6:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 6: Variable geometry stay hinges (with or without a friction stay) |
| ISO 14207:1998 | Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, light duty — Inch series |
| NF EN ISO 3613 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - CHROMATE CONVERSION COATINGS ON ZINC, CADMIUM, ALUMINIUM-ZINC ALLOYS AND ZINC-ALUMINIUM ALLOYS - TEST METHODS |
| ISO 8535-2:2003 | Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 2: Requirements for composite tubes |
| BS EN 22340:1992 | Clevis pins without head |
| BS EN 28737:1992 | Taper pins with external thread, unhardened |
| BS EN ISO 15979:2002 | Open end blind rivets with break pull mandrel and protruding head. St/St |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 13126-10:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 10: Arm-balancing systems |
| DIN EN 13126-17:2008-04 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 17: HARDWARE FOR TILT&SLIDE WINDOWS AND DOORS |
| DIN EN 13126-15:2008-04 | BUILDING HARDWARE - REQUIREMENTS AND TEST METHODS FOR WINDOWS AND DOORS HEIGHT WINDOWS - PART 15: ROLLERS FOR HORIZONTAL SLIDING AND SLIDING FOLDING WINDOWS AND DOORS |
| EN 13126-12:2008 | Building hardware - Requirements and test methods for windows and doors height windows - Part 12: Side hung projecting reversible hardware |
| DIN EN ISO 3613:2011-04 | Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2010) |
| DIN EN ISO 15979:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND PROTRUDING HEAD - ST/ST |
| DIN EN ISO 15980:2003-04 | OPEN END BLIND RIVETS WITH BREAK PULL MANDREL AND COUNTERSUNK HEAD - ST/ST |
| DIN EN 14648:2007-12 | Building hardware - Fittings for shutters - Requirements and test methods |
| DIN EN ISO 15976:2003-04 | Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002); German version EN ISO 15976:2002 |
| ISO 2082:2017 | Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| ISO 3892:2000 | Conversion coatings on metallic materials Determination of coating mass per unit area Gravimetric methods |
| ISO 3768:1976 | Metallic coatings — Neutral salt spray test (NSS test) |
| ISO 3613:2010 | Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.