Pneumatic fluid power General rules and safety requirements for systems and their components

Available format(s)

PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy

Language(s)

English, French

Published date

11-05-2010

Publisher

International Organization for Standardization

US$201.00

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

ISO 4414:2010 specifies general rules and safety requirements for pneumatic fluid power systems and components used on machinery as defined by ISO 12100. ISO 4414:2010 deals with all significant hazards associated with pneumatic fluid power systems and specifies principles to apply in order to avoid those hazards when the systems are put to their intended use.

ISO 4414:2010 applies to the design, construction and modification of systems and their components, also taking into account the following aspects: assembly, installation, adjustment, uninterrupted system operation, ease and economy of maintenance and cleaning, reliable operation in all intended uses, energy efficiency and environment.

ISO 4414:2010 does not apply to air compressors and the systems associated with air distribution as typically installed in a factory, including gas bottles and receivers.

DevelopmentNote	Supersedes ISO/DIS 4414. Available in CD-ROM format (contains program files). (11/2010)
DocumentType	Standard
Pages	38
PublisherName	International Organization for Standardization
Status	Current
Supersedes	ISO 4414:1998

Standards	Relationship
IS 12725 : 2021	Identical
NF EN ISO 4414 : 2011	Identical
NBN EN ISO 4414 : 2010	Identical
NEN EN ISO 4414 : 2010	Identical
NS EN ISO 4414 : 2010	Identical
I.S. EN ISO 4414:2010	Identical
PN EN ISO 4414 : 2011	Identical
SN EN ISO 4414 : 2011	Identical
UNI EN ISO 4414 : 2012	Identical
SS-EN ISO 4414:2010	Identical
UNE-EN ISO 4414:2011	Identical
BS EN ISO 4414:2010	Identical
EN ISO 4414:2010	Identical
DIN EN ISO 4414:2011-04	Identical
BS 4575-2:1987	Similar to
BIS IS 12725 : 2002	Identical
DIN ISO 4414:1999-10 (Draft)	Identical
NS 5930 : 1ED 1987	Identical
UNI ISO 4414 : 1992	Identical
BS EN ISO 13851:2019	Equivalent
PN ISO 4414 : 2004	Identical
BS ISO 4414:1998	Identical
NF ISO 4414 : 1999	Identical
SAC GB/T 7932 : 2017	Identical
NBN E 48 011 : 1987	Similar to
NEN ISO 4414 : 1998	Identical
DIN 24558:1991-10	Corresponds

UNE-EN 1501-5:2012	Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
I.S. EN 16228-6:2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
BS EN ISO 13856-3:2013	Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
BS EN 1870-19:2013	Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws
I.S. EN ISO 12100-2:2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
13/30266413 DC : 0	BS ISO 13105-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
DIN EN ISO 13856-2:2013-08	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
12/30244749 DC : 0	BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
BS 4862-2:1983	Mounting dimensions of single rod double acting 10 bar pneumatic cylinders Specification for cylinders, 32 mm bore and over, with detachable mountings
BS ISO 16110-1:2007	Hydrogen generators using fuel processing technologies Safety
BS EN ISO 80079-37:2016	Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\'
16/30337092 DC	BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements
BS EN ISO 12100:2010	Safety of machinery. General principles for design. Risk assessment and risk reduction
BS EN 15954-2:2013	Railway applications. Track. Trailers and associated equipment General safety requirements
BS EN 15572:2015	Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines
12/30253910 DC : DRAFT JULY 2012	BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
BS ISO 5599-2:2001	Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector
UNE-EN 16743:2016	Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
13/30279579 DC : 0	BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
12/30243081 DC : 0	BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
PREN 1870-3 : DRAFT 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
DIN EN 16564:2015-04	Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
BS ISO 10972-1:1998	Cranes. Requirements for mechanisms General
11/30231451 DC : DRAFT SEP 2011	BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
13/30273033 DC : 0	BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
14/30278956 DC : 0	BS ISO 17842-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
12/30243465 DC : 0	BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
ISO 14955-1:2017	Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
16/30333286 DC : 0	BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS
BS 7389-1:1990	Pneumatic fluid power valve mounting surfaces Specification for five-port directional control valves (without electrical connector)
BS EN 16474:2015	Plastics and rubber machines. Tyre curing machines. Safety requirements
DIN EN 15180:2015-01	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 62282-3-100:2012	Fuel cell technologies Stationary fuel cell power systems. Safety
ISO 21873-2:2009	Building construction machinery and equipment Mobile crushers Part 2: Safety requirements
06/30151312 DC : DRAFT JUN 2006	BS ISO 22673 - SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR FREE-FALL LIFEBOATS
12/30244743 DC : 0	BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
11/30212367 DC : 0	BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT
BS EN 62282-3-1:2007	Fuel cell technologies Stationary fuel cell power systems. Safety
16/30318928 DC : 0	BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES
PREN 474-1 : DRAFT 2017	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
14/30280597 DC : 0	BS ISO 1219-3 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 3: SYMBOL MODULES AND CONNECTED SYMBOLS IN CIRCUIT DIAGRAMS
BS 4575-2:1987	Fluid power transmission and control systems Code of practice for pneumatic equipment and systems
BS ISO 15217:2000	Fluid power systems and components. 16mm square electrical connector with earth contact. Characteristics and requirements
BS EN 15180:2014	Food processing machinery. Food depositors. Safety and hygiene requirements
13/30276226 DC : 0	BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
12/30243084 DC : 0	BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
ANSI B11.3 : 2012	SAFETY REQUIREMENTS FOR POWER PRESS BRAKES
06/30157092 DC : 0	ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
DIN EN 1807-1:2013-06	Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
DIN EN 15861:2013-06	Food processing machinery - Smokehouses - Safety and hygiene requirements
ANSI B11.6 : 2001 : R2012	SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
DIN EN 1034-16:2012-06	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
PREN 15572 : DRAFT 2013	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
DIN EN ISO 13482:2014-11	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
ISO/TS 19880-1:2016	Gaseous hydrogen Fuelling stations Part 1: General requirements
BS EN 12042:2014	Food processing machinery. Automatic dough dividers. Safety and hygiene requirements
ISO 18758-2:2018	Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
ANSI FC 1 : 2012	STATIONARY FUEL CELL POWER SYSTEMS
I.S. EN 1012-3:2013	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
PREN ISO 13856-2 : DRAFT 2011	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURESENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO/DIS 13856-2:2011)
I.S. EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
PREN 15163 : DRAFT 2014	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
BS EN 16005:2012	Power operated pedestrian doorsets. Safety in use. Requirements and test methods
I.S. EN ISO 18217:2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
I.S. EN 1807-2:2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
I.S. EN 1570-1:2011	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
I.S. EN 16564:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
I.S. EN 16500:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
I.S. EN 15180:2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15571:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
I.S. EN 1034-26:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
I.S. EN ISO 19085-3:2017	WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES (ISO 19085-3:2017)
ISO 15217:2000	Fluid power systems and components 16 mm square electrical connector with earth contact Characteristics and requirements
I.S. EN 15861:2012	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
ISO/IEC 80079-38:2016	Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
UNI EN ISO 12100 : 2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
ISO 19224:2017	Continuous surface miners (CSM) — Safety requirements
BS 4862-1:1983	Mounting dimensions of single rod double acting 10 bar pneumatic cylinders Specification for cylinders up to 25 mm bore
I.S. EN 1034-17:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
UNI EN 15180 : 2014	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN ISO 13856-1:2013	Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
17/30354108 DC : 0	BS EN 17106-1 - ROAD OPERATION MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
16/30322398 DC : 0	BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS
I.S. EN ISO 19085-5:2017	WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS (ISO 19085-5:2017)
I.S. EN ISO 14118:2018	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP (ISO 14118:2017)
UNE-EN 16500:2015	Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
NF EN ISO 19085-1 : 2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
UNE-EN ISO 19085-1:2018	Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
BS EN 1459-2 : 2015	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
16/30314039 DC : 0	BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
NF ISO 16110-1 : 2009	HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
UNE-EN 1459-2:2016	Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
UNI EN 1034-21 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
EN ISO 4254-1:2015	Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
DIN EN ISO/IEC 80079-38:2012-08 (Draft)	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
ISO 16089:2015	Machine tools Safety Stationary grinding machines
EN ISO 16090-1:2018	Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017)
PREN 16770 : DRAFT 2014	SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS
EN 12013:2018	Plastics and rubber machines - Internal mixers - Safety requirements
DIN EN 1034-3:2012-02	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
DIN EN 13378:2016-05 (Draft)	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13223:2015-11	Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
DIN EN 1870-7:2013-01	Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
DIN EN 1870-12:2014-03	Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
DIN EN ISO 13849-2:2013-02	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
DIN EN 1870-16:2013-01	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN 1870-9:2013-01	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 13418:2013-08	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
DIN EN 1870-3:2015-02	Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
I.S. EN 861:2007	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNE-EN 1870-4:2012	Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
BS EN 12111:2014	Tunnelling machines. Road headers and continuous miners. Safety requirements
UNE-EN 1870-7:2013	Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
11/30235014 DC : 0	BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
BS EN 859 : 2007	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
BS EN 1870-16:2012	Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting
UNE-EN ISO 13849-2:2013	Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
BS EN 1889-1:2011	Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles
BS EN 13418:2013	Plastics and rubber machines. Winding machines for film or sheet. Safety requirements
05/30060689 DC : DRAFT JUN 2005	IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY
BS EN 1870-9:2012	Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
BS EN 1870-15:2012	Safety of woodworking machines. Circular sawing machines Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
ONORM EN 474-1 : 2015	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
14/30278953 DC : 0	BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
IEC 62282-3-1:2007	Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
BS EN 1870-10:2013	Safety of woodworking machines. Circular sawing machines Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
BS EN 13378 : 2001	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 4254-1:2015	Agricultural machinery. Safety General requirements
I.S. EN 859:2007	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
EN 13870:2015	Food processing machinery - Portion cutting machines - Safety and hygiene requirements
I.S. EN 13871:2014	FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1870-16:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
I.S. EN 13289:2001	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
EN 13418:2013	Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
EN 1034-17:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
EN ISO 23125:2015	Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
EN 1501-5:2011	Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
EN 16228-1:2014	Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 62282-3-1 : 2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 13379:2001+A1:2013	Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements
EN 16191:2014	Tunnelling machinery - Safety requirements
EN 1034-8:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants
EN 1501-1:2011+A1:2015	Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
EN 1034-21:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines
EN 12779:2015	Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
EN 13378:2001+A1:2013	Pasta processing plants - Pasta presses - Safety and hygiene requirements
EN 1807-1:2013	Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
DIN EN ISO 12100-2:2004-04	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 13289:2001+A1:2013	Pasta processing plants - Dryers and coolers - Safety and hygiene requirements
EN ISO 80079-37:2016	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
EN 1034-26:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines
ONORM EN 13223 : 2015	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT
15/30302620 DC : 0	BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES
12/30265270 DC : 0	BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
BS EN 691-1:2012	Safety of woodworking machines Common requirements
BS EN 1034-8:2012	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Refining plants
DIN EN 15955-2:2013-09	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNE-EN 1870-13:2008	Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
ISO 13105-2:2014	Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification
15/30326831 DC : 0	BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNE-EN ISO 16093:2017	Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
I.S. EN 62282-3-1:2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
UNI EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
UNI EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
CSA M4254.1 : 2007	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 13463-5:2011	NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
BS ISO 15407-2:2003	Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector
17/30341100 DC : 0	BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
12/30260942 DC : 0	BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
PREN 1672-1 : DRAFT 2012	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 13856-1:2013-08	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
BS EN 1870-18:2013	Safety of woodworking machines. Circular sawing machines Dimension saws
UNI EN ISO 13856-3 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
14/30274816 DC : 0	BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
14/30297842 DC : 0	BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
BS EN 1034-16:2012	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines
00/710433 DC : DRAFT JUNE 2000	ISO/CD 15516 - SHIPS AND MARINE TECHNOLOGY - LAUNCHING APPLIANCES FOR DAVIT-LAUNCHED LIFEBOATS
EN 474-1:2006+A5:2018	Earth-moving machinery - Safety - Part 1: General requirements
PREN 1114-3 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
I.S. EN ISO 16090-1:2018	MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017)
12/30232434 DC : 0	BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
12/30259421 DC : 0	BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
DIN EN 1807-2:2013-06	Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013
UNI EN 16191 : 2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
UNI EN 16228-1 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
12/30255086 DC : 0	BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
BS EN 14033-3 : 2009	RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
BS EN ISO 8230-1:2008	Safety requirements for dry-cleaning machines Common safety requirements
UNE-EN 691-1:2013	Safety of woodworking machines - Part 1: Common requirements
DIN EN 15949:2012-05	Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
03/119009 DC : DRAFT DEC 2003	ISO 18651 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - INTERNAL VIBRATORS FOR CONCRETE
16/30335973 DC : 0	BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE)
UNI EN 1034-26 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
17/30359101 DC : 0	BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
BS ISO 14955-1:2017	Machine tools. Environmental evaluation of machine tools Design methodology for energy-efficient machine tools
11/30244804 DC : 0	BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
BS EN 15467:2014	Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements
BS ISO 12643-5:2010	Graphic technology. Safety requirements for graphic technology equipment and systems Stand-alone platen presses
BS EN 16743:2016	Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements
13/30276223 DC : 0	BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
UNI EN ISO 28881 : 2013	MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES
BS ISO 15516:2006	Ships and marine technology. Launching appliances for davit-launched lifeboats
UNE-EN ISO 13856-2:2013	Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
BS EN 1672-1:2014	Food processing machinery. Basic concepts Safety requirements
PREN 15746-2 : DRAFT 2015	RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI ISO 5598 : 2012	FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY
DIN EN 1570-1:2015-01	Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings (includes Amendment A1:2014)
CSA Z142 : 2010 : R2014	CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS
ANSI B11.8:2001(R2007)	SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
UNI EN ISO 11806-2 : 2012	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT
PREN 1870-6 : DRAFT 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 15165 : 2014	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ANSI B11.0 : 2015	SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
BS EN ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
16/30328759 DC : 0	BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
I.S. EN 1672-1:2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
I.S. EN 15163:2017	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
UNI EN ISO 10218-2 : 2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
I.S. EN 12453:2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
I.S. EN 15955-2:2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
ANSI B11.2 : 2013	SAFETY REQUIREMENTS FOR HYDRAULIC AND PNEUMATIC POWER PRESSES
BS EN 13135 : 2013	CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
DIN EN 15467:2015-03	FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 5599-1:2001	Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector
ISO 19085-1:2017	Woodworking machines Safety Part 1: Common requirements
DIN EN 474-1:2014-03	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
DIN EN 12042:2014-07	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 691-1:2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
UNE-EN 15861:2013	Food processing machinery - Smokehouses - Safety and hygiene requirements
UNI EN 15949 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
16/30341165 DC : 0	BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
17/30362886 DC : 0	BS EN 12609 - TRUCK MIXERS - SAFETY REQUIREMENTS
UNI EN 12042 : 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
EN ISO 14118:2018	Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017)
BS EN 474-1:2006+A6:2019	Earth-moving machinery. Safety General requirements
UNI EN 1034-27 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
PREN 289 : DRAFT 2012	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
EN 12453 : 2017 COR 2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
I.S. EN 14033-3:2017	RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
ISO 20966:2007	Automatic milking installations — Requirements and testing
DIN EN 12779:2016-03	Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
DIN EN 1870-14:2012-06	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
DIN EN 1870-10:2013-07	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN ISO 4254-1:2016-09	Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
DIN EN 1417:2015-03	Plastics and rubber machines - Two roll mills - Safety requirements; German version EN 1417:2014
DIN EN 1870-13:2013-07	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
DIN EN 1870-8:2013-03	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 13379:2016-06 (Draft)	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 536:2016-01	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
UNE-EN 289:2014	Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
BS EN 13524 : 2003	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
UNE-EN 1034-3:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
BS EN 1870-7:2012	Safety of woodworking machines. Circular sawing machines Single blade log sawing machines with integrated feed table and manual loading and/or unloading
ISO 10472-1:1997	Safety requirements for industrial laundry machinery Part 1: Common requirements
BS EN 940 : 2009	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
UNE-EN 1870-10:2013	Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
EN 62282-3-100:2012	Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BS EN ISO 13849-2:2012	Safety of machinery. Safety-related parts of control systems Validation
UNE-EN 13223:2015	Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
BS EN 13379 : 2001	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 13418:2013	Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
I.S. EN 1870-11:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
I.S. EN 13524:2003	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
I.S. EN 1870-8:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
I.S. EN ISO 13849-2:2012	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012)
I.S. EN 289:2014	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 415-6:2013	SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
I.S. EN 1870-10:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
I.S. EN 13379:2001	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1808:2015	SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
DIN EN 13524:2003-10	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
I.S. EN 1870-12:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
ONORM EN 16564 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
ONORM EN 12042 : JUN 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
EN 13524:2003+A2:2014	Highway maintenance machines - Safety requirements
I.S. EN 1870-9:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 1870-3:2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
I.S. EN 13378:2001	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13463-5:2011-10	NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
EN 16564:2014	Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
I.S. EN 12750:2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
DIN EN 13463-5:2004-03	NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
I.S. EN 13852-1:2013	CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
I.S. EN 12111:2014	TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
I.S. EN 1870-15:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 1870-17:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
I.S. EN 13418:2013	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
ONORM EN 15571 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
I.S. EN ISO 10472-1:2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
I.S. EN 1889-1:2011	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
I.S. EN ISO 13849-1:2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015)
I.S. EN 1870-14:2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
I.S. EN 13223:2015	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT
I.S. EN 12779:2015	SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
DIN EN 13289:2013-05	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
EN 15571:2014	Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
I.S. EN 13870:2015	FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 940:2009	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
I.S. EN 1417:2014	PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS
I.S. EN ISO 4254-1:2015	AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013)
DIN EN 13378:2013-05	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13379:2013-05	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 536:2015	ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS
I.S. EN 1953:2013	ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN 1501-1:2011	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
I.S. EN 1870-5:2002	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
I.S. EN ISO 13850:2015	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
I.S. EN 1870-7:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
I.S. EN 1870-4:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 1034-3:2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
ANSI B11 TR6 : 2010	MACHINES - SAFETY CONTROL SYSTEM FOR MACHINE TOOLS
DIN EN ISO 16093:2017-10	Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
ONORM EN ISO 28881 : 2013	MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES (ISO 28881:2013)
05/30105911 DC : DRAFT JUN 2005	ISO 20966 - AUTOMATIC MILKING SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING
UNI EN 16005 : 2012	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
UNI EN 15861 : 2012	FOOD PROCESSING MACHINERY - SMOKEHOUSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN ISO 10218-2:2011	Robots and robotic devices. Safety requirements for industrial robots Robot systems and integration
BS EN 15571:2014	Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines
12/30244783 DC : 0	BS EN ISO 13856-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
DIN EN ISO 80079-37:2016-12	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016)
14/30272245 DC : 0	BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS
BS ISO 13105-2 : 2014	BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MACHINERY FOR CONCRETE SURFACE FLOATING AND FINISHING - PART 2: SAFETY REQUIREMENTS AND VERIFICATION
09/30196817 DC : 0	BS ISO 11806-2 - AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES WITH BACKPACK POWER SOURCE
I.S. EN 848-1:2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
DIN EN ISO 18217:2015-12	Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
12/30247814 DC : 0	BS EN 1034-27 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
PREN 13871 : DRAFT 2012	FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
PREN 13379 : DRAFT 2016	PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 16005:2012	POWER OPERATED PEDESTRIAN DOORSETS - SAFETY IN USE - REQUIREMENTS AND TEST METHODS
BS EN ISO 28881:2013	Machine tools. Safety. Electro-discharge machines
15/30296744 DC : 0	BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
BS ISO 19354:2016	Ships and marine technology. Marine cranes. General requirements
12/30253907 DC : DRAFT JULY 2012	BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS
DIN EN 16005:2013-01	Power operated pedestrian doorsets - Safety in use - Requirements and test methods
PREN 14492-1 : DRAFT 2015	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BS EN 1807-2:2013	Safety of woodworking machines. Band sawing machines Log sawing machines
16/30331346 DC : 0	BS EN ISO 14118 - SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
I.S. EN ISO 11806-2:2011	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE, HAND-HELD, POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER UNIT (ISO 11806-2:2011)
17/30317170 DC : 0	BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
16/30354071 DC : 0	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
DIN EN ISO 16093:2014-03 (Draft)	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
UNI EN ISO 8230-1 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 16228-6 : 2014	ATTREZZATURE PER PERFORAZIONI E FONDAZIONI - SICUREZZA - PARTE 6: ATTREZZATURE PER JETTING, CEMENTAZIONE E INIEZIONE
DIN EN 15165:2015-01	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1570-1 : 2011	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
14/30297793 DC : 0	BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES
BS EN 15165:2014	Food processing machinery. Forming machines. Safety and hygiene requirements
BS EN 1034-17:2012	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines
BS EN ISO 13856-2:2013	Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
I.S. EN 15949:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS
BS ISO 1219-2:2012	Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams
BS EN 1807-1:2013	Safety of woodworking machines. Band sawing machines Table band saws and band re-saws
DIN EN 16743:2016-05	FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1034-21:2012	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Coating machines
CEI EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
DIN EN 16191:2014-09	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
DIN EN ISO 10218-2:2012-06	Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
UNE-EN 16564:2015	Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
UNE-EN 16474:2015	Plastics and rubber machines - Tyre curing machines - Safety requirements
14/30263884 DC : 0	BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
BS EN 16191:2014	Tunnelling machinery. Safety requirements
DIN EN 16228-1:2014-10	Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014
I.S. EN 1034-16:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
UNE-EN 16228-6:2015	Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
BS EN 1012-3:2013	Compressors and vacuum pumps. Safety requirements Process compressors
DIN EN 16474:2015-08	PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
BS ISO 21789:2009	Gas turbine applications — Safety
14/30292850 DC : 0	BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
ANSI/CSA FC 1:2014	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
ISO 15407-2:2003	Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector
ISO 16092-1:2017	Machine tools safety — Presses — Part 1: General safety requirements
UNE-EN 1807-1:2013	Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws
DIN EN 415-10:2014-07	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
A-A-59384 Revision B:2014	PRESS, 'H' FRAME, HYDRAULIC
PREN 12779 : DRAFT 2014	SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
UNI EN 1034-8 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
S.R. CEN ISO/TR 22100-1:2017	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
I.S. EN 1459-2:2015	ROUGH-TERRAIN TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 2: SLEWING VARIABLE-REACH TRUCKS
UNI EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
I.S. EN 15572:2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
NF EN ISO 10218-2 : 2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEM AND INTEGRATION
ONORM EN 1501-1 : 2015	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
I.S. EN 15467:2014	FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 13122:2011	Ships and marine technology — Launching appliances for davit-launched liferafts
UNI EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 474-1:2006	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BIS IS/ISO 12643-5 : 2010	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 5: STAND-ALONE PLATEN PRESSES
UNE-EN ISO 10218-2:2011	Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
I.S. EN 16743:2016	FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 15954-2:2013	RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
I.S. EN 16774:2016	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
BS EN 474-1 : 2006	EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO/TS 20100:2008	Gaseous hydrogen Fuelling stations
DIN EN 12453:2005-05 (Draft)	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 13856-2:2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS (ISO 13856-2:2013)
I.S. EN 1870-18:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
16/30338566 DC : 2016-06	BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 1034-21:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
ISO 16030:2001	Pneumatic fluid power — Connections — Ports and stud ends
EN ISO 19085-3:2017	Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017)
EN 12042 : 2014 COR 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 16093:2017	MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017)
BS EN ISO 16089:2015	Machine tools. Safety. Stationary grinding machines
17/30364338 DC : 0	BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS
UNE-EN ISO 23125:2015	Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)
ISO 5598:2008	Fluid power systems and components Vocabulary
I.S. EN 12013:2018	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
PREN 12978 : DRAFT 2017	INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
I.S. EN 1501-5:2011	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
UNE-EN 1870-14:2008	Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
UNI EN 1034-16 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
PREN 12301 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
EN ISO 19085-5:2017	Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)
EN 1459-2:2015	Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks
ISO 19372:2015	Microturbines applications — Safety
ISO 10972-1:1998	Cranes — Requirements for mechanisms — Part 1: General
ISO 19354:2016	Ships and marine technology — Marine cranes — General requirements
ISO 17842-2:2015	Safety of amusement rides and amusement devices Part 2: Operation and use
UNE-EN 13135:2013	Cranes - Safety - Design - Requirements for equipment
EN ISO/IEC 80079-38:2016	Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
ISO 16110-1:2007	Hydrogen generators using fuel processing technologies Part 1: Safety
ISO 17842-1:2015	Safety of amusement rides and amusement devices — Part 1: Design and manufacture
ISO/TR 17529:2014	Machine tools Practical guidance and example of risk assessment on electro-discharge machines
ISO 21789:2009	Gas turbine applications — Safety
ISO 15516:2006	Ships and marine technology — Launching appliances for davit-launched lifeboats
DIN EN 1870-11:2014-02	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 12750:2013-05	Safety of woodworking machines - Four sided moulding machines
DIN EN 1953:2013-12	ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN ISO 10472-1:2009-10	Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
DIN EN 1870-17:2015-06	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 1808:2015-08	Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
DIN EN 1870-15:2013-01	Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
DIN EN 848-3:2013-01	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN 848-1:2013-01	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
DIN EN 13870:2015-12	Food processing machinery - Portion cutting machines - Safety and hygiene requirements
DIN EN 848-2:2013-01	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
BS EN 848-1 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
UNE-EN 15954-2:2014	Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
BS EN ISO 11680-2:2011	Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners Machines for use with backpack power source
BS EN 1417:2014	Plastics and rubber machines. Two-roll mills. Safety requirements
UNE-EN 1889-1:2012	Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
UNE-EN 15955-2:2014	Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
BS EN 861 : 2007	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
BS EN 848-2 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
DIN EN 1889-1:2011-10	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
BS EN 1034-3:2011	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Rereelers and winders
18/30359998 DC : 0	BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
OVE/ONORM EN 62282-3-100 : 2013	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012)
UNE-EN 848-1:2008	Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines
UNE-EN 13463-5:2013	Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
UNE-EN 848-3:2013	Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
I.S. EN 848-2:2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
EN ISO 8230-1:2008	Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
EN 1870-15:2012	Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
EN ISO 16093:2017	Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)
UNI EN 13379 : 2013	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
ONORM EN 16228-6 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 6: JETTING, GROUTING AND INJECTION EQUIPMENT
UNI EN 1870-13 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
UNI EN 1870-8 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
UNI EN 1889-1 : 2011	MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
UNI EN 1870-15 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
UNI EN 15954-2 : 2013	RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 848-3 : 2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
UNI EN 12750 : 2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
UNI EN ISO 12100-2 : 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
UNI EN 1870-16 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
UNI EN 860 : 2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES
UNI EN 415-6 : 2013	SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES
UNI EN 815 : 2009	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
UNI EN 13871 : 2014	FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 1012-3 : 2014	COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN 13463-5 : 2011	NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
UNI EN 13378 : 2013	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 13418 : 2013	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
UNI EN 859 : 2012	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
UNI EN 848-1 : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
ONORM EN ISO 11680-2 : 2012	MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE (ISO 11680-2:2011)
UNI EN 1870-4 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
EN 1870-11:2013	Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
UNI EN 1870-9 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 983 : 2009	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
UNI EN 1870-12 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
UNI EN 1870-14 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
EN 1034-27:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
UNI EN 1870-10 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
EN 860:2007+A2:2012	Safety of woodworking machines - One side thickness planing machines
UNI EN 1870-11 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
UNI EN 1953 : 2013	Atomising and spraying equipment for coating materials - Safety requirements
UNI EN 13852-1 : 2013	CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
UNI EN 848-2 : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
UNI EN 12111 : 2014	TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS
UNI EN 13289 : 2013	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN ISO 10472-1 : 2009	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
UNI EN 15955-2 : 2013	RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
UNI EN 861 : 2012	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
UNI EN ISO 13849-2 : 2013	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION
UNI EN 940 : 2012	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
UNI EN 1034-3 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
UNI EN 1870-5 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
UNI EN 289 : 2014	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
UNI EN 1870-7:2012	Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
I.S. EN ISO 10218-2:2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 2: ROBOT SYSTEMS AND INTEGRATION
UNI EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
BS EN 16564:2014	Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
ANSI B11.25 : 2015	SAFETY REQUIREMENTS FOR LARGE MACHINES
14/30293313 DC : 0	BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES
BS EN 16228-6:2014	Drilling and foundation equipment. Safety Jetting, grouting and injection equipment
CSA Z432 : 2016	SAFEGUARDING OF MACHINERY
DIN EN ISO 13856-3:2013-12	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
I.S. EN ISO 16092-1:2018	MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS (ISO 16092-1:2017)
DIN EN 16191 E : 2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
BS ISO 19224:2017	Continuous surface miners (CSM). Safety requirements
BS EN 15949:2012	Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
BS EN ISO 19085-5:2017	Woodworking machines. Safety Dimension saws
UNI EN ISO 13856-2 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
DIN EN 1870-19:2014-03	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
PREN 12013 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
UNE-EN 62282-3-1:2011	Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
I.S. EN 848-3:2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN 1672-1:2014-12	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
UNI EN 1501-5 : 2011	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
UNI EN 1034-17 : 2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES
11/30227089 DC : 0	BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
07/30166811 DC : 0	BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
ISO/TR 18569:2004	Safety of machinery Guidelines for the understanding and use of safety of machinery standards
DIN EN 1501-5:2012-02	Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
DIN EN 15572:2015-12	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
14/30302903 DC : 0	BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT
DIN EN 15571:2015-03	Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
12/30263881 DC : 0	BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
DIN EN 16228-6:2014-10	Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
BS EN 1501-5:2011	Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles
BS EN 15906:2011	Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity
DIN ISO 16030:2007-05	PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS
I.S. EN 1870-6:2017	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
BS EN 16228-1:2014	Drilling and foundation equipment. Safety Common requirements
UNE-EN 15163:2018	Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
15/30300474 DC : DRAFT FEB 2015	BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS
14/30285733 DC : 0	BS EN ISO 16092-1 - MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS
11/30231784 DC : 0	BS EN 1870-13:2007+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
11/30243078 DC : 0	BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES
BS EN 415-10:2014	Safety of packaging machines General Requirements
14/30299766 DC : 0	BS EN 1501-1:2011/A1 - REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
09/30196676 DC : DRAFT OCT 2009	BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS
DIN EN 14033-3:2014-08 (Draft)	RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS
11/30232159 DC : 0	BS EN ISO 4254-1 - AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
09/30201664 DC : 0	BS EN ISO 12100 - SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN, RISK ASSESSMENT AND RISK REDUCTION
BS EN ISO 16093:2017	Machine tools. Safety. Sawing machines for cold metal
14/30293310 DC : 0	BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
12/30255089 DC : 0	BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS
15/30302205 DC : DRAFT FEB 2015	BS EN ISO 19296 - MINING AND EARTHMOVING MACHINERY - MOBILE MACHINES WORKING UNDERGROUND - MACHINE SAFETY
UNE-EN ISO 13482:2014	Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)
DIN EN 1870-18:2013-08	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS ISO 5599-1:2001	Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector
PREN 15180 : DRAFT 2011	FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1870-6:2017	Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood
08/30187323 DC : DRAFT JULY 2008	BS ISO 21873-2 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - MOBILE CRUSHERS - PART 2: SAFETY REQUIREMENTS
PREN 1034-3 : DRAFT 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS
05/30137922 DC : DRAFT AUG 2005	ISO 13865-3 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
BS ISO 5598:2008	Fluid power systems and components. Vocabulary
DIN EN 1034-17:2012-11	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines
BS EN ISO 13482:2014	Robots and robotic devices. Safety requirements for personal care robots
DIN EN 16500:2014-10	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
12/30260299 DC : 0	BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15955-2:2013	Railway applications. Track. Demountable machines and associated equipment General safety requirements
11/30251974 DC : 0	BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS
09/30203783 DC : DRAFT NOV 2009	BS ISO 12643-5 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 5: STAND-ALONE PLATEN PRESSES
NF EN ISO 11806-2 : 2012	AGRICULTURAL AND FORESTRY MACHINERY - SAFETY REQUIREMENTS AND TESTING FOR PORTABLE HAND-HELD POWERED BRUSH-CUTTERS AND GRASS-TRIMMERS - PART 2: MACHINES WITH BACK-PACK POWER SOURCE
BS EN 1034-27:2012	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll handling systems
CSA Z434 : 2014	INDUSTRIAL ROBOTS AND ROBOT SYSTEMS
BS EN 15163:2017	Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws
04/30086349 DC : DRAFT APR 2004	EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
UNI EN 1870-18 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
UNE-EN 1807-2:2013	Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
BS ISO 20966:2007	Automatic milking installations. Requirements and testing
ANSI B11.6 : 2001 : R2007	SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
DIN EN 16500 E : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
DIN EN ISO 8230-1:2009-05	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
BS EN 16774:2016	Safety of machinery. Safety requirements for steel converter and associated equipment
BS ISO 1219-3:2016	Fluid power systems and components. Graphical symbols and circuit diagrams Symbol modules and connected symbols in circuit diagrams
DIN EN 1034-26:2012-06	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES
I.S. EN 1807-1:2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
ISO 5599-2:2001	Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
UNE-EN 1672-1:2015	Food processing machinery - Basic concepts - Part 1: Safety requirements
ISO 1219-2:2012	Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
I.S. EN 1034-27:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS
I.S. EN ISO 28881:2013	MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES (ISO 28881:2013)
PREN 15467 : DRAFT 2012	FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 13856-3:2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 3: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2013)
PREN 13378 : DRAFT 2016	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
ISO 1219-3:2016	Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams
I.S. EN 62282-3-100:2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
ISO 22673:2008	Ships and marine technology — Launching appliances for free-fall lifeboats
I.S. EN 16191:2014	TUNNELLING MACHINERY - SAFETY REQUIREMENTS
I.S. EN ISO 13482:2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014)
I.S. EN ISO/IEC 80079-38:2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
CEN ISO/TR 22100-1:2017	Safety of machinery - Relationship with ISO 12100 - Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015)
S.R. CWA 16688:2013	BATTERY SWAP SYSTEMS INTERFACES FOR ELECTRIC VEHICLES
I.S. EN ISO 80079-37:2016	EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO/DIS 80079-37:2014)
I.S. EN ISO 8230-1:2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
I.S. EN ISO 16089:2015	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014)
14/30301874 DC : 0	BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS
UNE-EN ISO 80079-37:2018	Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
17/30362673 DC : 0	BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
BS EN 12013:2018	Plastics and rubber machines. Internal mixers. Safety requirements
PD CEN ISO/TR 22100-1:2017	Safety of machinery. Relationship with ISO 12100 How ISO 12100 relates to type-B and type-C standards
EN 15163:2017	Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
UNE-EN ISO 12100:2012	Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
ISO 14118:2017	Safety of machinery — Prevention of unexpected start-up
ISO/TR 22100-1:2015	Safety of machinery Relationship with ISO 12100 Part 1: How ISO 12100 relates to type-B and type-C standards
DIN EN 13135:2013-05	CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT
ISO 12643-5:2010	Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Stand-alone platen presses
DIN EN 940:2012-05	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
DIN EN 861:2012-09	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
DIN EN ISO 13850:2016-05	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN (ISO 13850:2015)
DIN EN 859:2012-09	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
DIN EN 13852-1:2014-01	Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
DIN EN 860:2012-09	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN 13463-5:2011	Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\'
BS EN ISO 13850:2015	Safety of machinery. Emergency stop function. Principles for design
ISO 8230-1:2008	Safety requirements for dry-cleaning machines Part 1: Common safety requirements
BS EN 1870-12:2013	Safety of woodworking machines. Circular sawing machines Pendulum cross-cut sawing machines
BS ISO 17842-1:2015	Safety of amusement rides and amusement devices Design and manufacture
BS EN 13871:2014	Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements
BS EN 13223:2015	Safety requirements for cableway installations designed to carry persons. Drive systems and other mechanical equipment
BS EN 815 : 1997	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
ISO 8230:1997	Safety requirements for dry-cleaning machines using perchloroethylene
UNE-EN 16228-1:2015	Drilling and foundation equipment - Safety - Part 1: Common requirements
UNE-EN ISO 13850:2016	Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
ISO 4254-1:2013	Agricultural machinery — Safety — Part 1: General requirements
UNE-EN 13524:2003	Highway maintenance machines - Safety requirements
BS EN 13289 : 2001	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12779:2015	Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements
ISO 13482:2014	Robots and robotic devices Safety requirements for personal care robots
UNE-EN 1870-15:2013	Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
UNE-EN 16005:2013	Power operated pedestrian doorsets - Safety in use - Requirements and test methods
BS ISO 19372:2015	Microturbines applications. Safety
11/30211394 DC : DRAFT MAR 2011	BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
UNE-EN 415-6:2014	Safety of packaging machines - Part 6: Pallet wrapping machines
ISO 10218-2:2011	Robots and robotic devices Safety requirements for industrial robots Part 2: Robot systems and integration
ISO 13856-3:2013	Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
BS EN 1870-3:2014	Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
ISO 23125:2015	Machine tools — Safety — Turning machines
UNE-EN ISO 11680-2:2012	Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)
UNE-EN 12750:2013	Safety of woodworking machines - Four sided moulding machines
BS EN 12750:2013	Safety of woodworking machines. Four sided moulding machines
BS EN 1870-11:2013	Safety of woodworking machines. Circular sawing machines Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
BS EN 983 : 1996	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
ISO 11680-2:2011	Machinery for forestry Safety requirements and testing for pole-mounted powered pruners Part 2: Machines for use with back-pack power source
ISO 13856-1:2013	Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 10099:2001	Pneumatic fluid power — Cylinders — Final examination and acceptance criteria
BS EN 1501-1 : 2011	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
UNE-ISO 16110-1:2015	Hydrogen generators using fuel processing technologies -- Part 1: Safety
BS EN 1870-4:2012	Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 11806-2:2011	Agricultural and forestry machinery Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Part 2: Machines for use with back-pack power unit
ISO 18217:2015	Safety of woodworking machines Edge-banding machines fed by chain(s)
ISO 80079-37:2016	Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
UNE-EN 860:2007	Safety of woodworking machines - One side thickness planing machines
ISO 16093:2017	Machine tools — Safety — Sawing machines for cold metal
IEC 62282-3-100:2012	Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
ISO 13856-2:2013	Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars
BS EN 1808:2015	Safety requirements for suspended access equipment. Design calculations, stability criteria, construction. Examinations and tests
BS EN 1870-13 : 2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
UNE-EN 1870-9:2013	Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
UNE-EN 1870-16:2013	Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
BS EN 13870:2015	Food processing machinery. Portion cutting machines. Safety and hygiene requirements
BS EN 536:2015	Road construction machines. Mixing plants for road construction materials. Safety requirements
UNE-EN 940:2010	Safety of woodworking machines - Combined woodworking machines
UNE-EN 13871:2015	Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
BS EN ISO 13849-1:2015	Safety of machinery. Safety-related parts of control systems General principles for design
UNE-EN 859:2008	Safety of woodworking machines - Hand fed surface planing machines
BS EN 1870-5 : 2002	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
UNE-EN ISO 13849-1:2016	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
UNE-EN 13870:2016	Food processing machinery - Portion cutting machines - Safety and hygiene requirements
BS EN 860 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
UNE-EN 13852-1:2014	Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
UNE-EN 1870-8:2013	Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
EN 1417:2014	Plastics and rubber machines - Two-roll mills - Safety requirements
EN 691-1:2012	Safety of woodworking machines - Part 1: Common requirements
EN 16774:2016	Safety of machinery - Safety requirements for steel converter and associated equipment
EN 1570-1:2011+A1:2014	Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
EN ISO 12100:2010	Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN 15467:2014	Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements
EN 1808:2015	Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
EN 536:2015	Road construction machines - Mixing plants for road construction materials - Safety requirements
EN ISO 13856-1:2013	Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)
EN 415-10:2014	Safety of packaging machines - Part 10: General Requirements
EN ISO 13850:2015	Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
EN 15955-2:2013	Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements
ONORM EN 12750 : 2013	SAFETY OF WOODWORKING MACHINES - FOUR-SIDED MOULDING MACHINES
EN 15954-2:2013	Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
EN ISO 13856-2:2013	Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)
EN 1672-1:2014	Food processing machinery - Basic concepts - Part 1: Safety requirements
ONORM EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
EN ISO 10472-1:2008	Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
UNI EN 13524 : 2014	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
EN 1870-16:2012	Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting
EN 15949:2012	Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills
EN 1870-13:2007+A2:2012	Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines
EN 1953:2013	Atomising and spraying equipment for coating materials - Safety requirements
EN ISO 13849-1:2015	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 13482:2014	Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)
EN 16500:2014	Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
EN 1870-6:2017	Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
EN 1889-1:2011	Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
EN ISO 13849-2:2012	Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)
EN 1870-3:2014	Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
EN 1870-18:2013	Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
EN 13852-1:2013	Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 1870-14:2007+A2:2012	Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines
EN 1807-2:2013	Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines
EN ISO 8230 : 1997	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
EN 1870-5 : 2002	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
EN 1870-7:2012	Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
EN 13871:2014	Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements
EN 15165:2014	Food processing machinery - Forming machines - Safety and hygiene requirements
EN 983:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 1870-19:2013	Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
ONORM EN 13870 : 2015	FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
EN 859:2007+A2:2012	Safety of woodworking machines - Hand fed surface planing machines
EN ISO 11806-2:2011	Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)
EN 14033-3:2017	Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements
EN 1870-17:2012+A1:2015	Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
EN 815:1996+A2:2008	Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
EN ISO 16089:2015	Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)
ONORM EN 13524 : 2014	HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
EN 848-2 : 2007 COR 2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
EN 861:2007+A2:2012	Safety of woodworking machines - Surface planing and thicknessing machines
EN 940:2009+A1:2012	Safety of woodworking machines - Combined woodworking machines
EN 848-3:2012	Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines
EN 1870-8:2012	Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
EN 16743:2016	Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements
EN 15861:2012	Food processing machinery - Smokehouses - Safety and hygiene requirements
EN 15572:2015	Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines
EN 415-6:2013	Safety of packaging machines - Part 6: Pallet wrapping machines
EN 16474:2015	Plastics and rubber machines - Tyre curing machines - Safety requirements
EN 1870-4:2012	Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading
EN ISO 10218-2:2011	Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)
EN 15180:2014	Food processing machinery - Food depositors - Safety and hygiene requirements
EN 289:2014	Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
EN 1870-12:2013	Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines
EN 1870-10:2013	Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
EN ISO 13856-3:2013	Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)
EN 1870-9:2012	Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
EN 15906:2011	Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity
BS ISO 10099:2001	Pneumatic fluid power. Cylinders. Final examination and acceptance criteria
14/30265058 DC : 0	BS EN ISO 13850 - SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
UNI EN ISO 13482 : 2014	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS
DIN EN 1034-21:2012-11	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES
BS ISO 16030:2001	Pneumatic fluid power. Connections. Ports and stud ends
DIN EN 691-1:2013-01	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 1034-8:2012-06	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
11/30232437 DC : 0	BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
BS ISO 13122:2011	Ships and marine technology. Launching appliances for davit-launched liferafts
03/301050 DC : DRAFT JAN 2003	ISO 4254-1 ED.3 - AGRICULTURAL MACHINERY - TECHNICAL MEANS FOR ENSURING SAFETY - PART 1: GENERAL
16/30318924 DC : 0	BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES')
BS EN 16500:2014	Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements
I.S. EN ISO 8230:1998	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
16/30328756 DC : 0	BS EN 13814-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
I.S. EN 1870-13:2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
13/30276220 DC : 0	BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
16/30341470 DC : 0	BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS)
BS EN ISO 18217:2015	Safety of woodworking machines. Edge-banding machines fed by chain(s)
PREN 15571 : DRAFT 2013	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
12/30260496 DC : 0	BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
PREN 13289 : DRAFT 2015	PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 11806-2:2011	Agricultural and forestry machinery. Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers Machines for use with back-pack power unit
I.S. EN 15165:2014	FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15861:2012	Food processing machinery. Smokehouses. Safety and hygienerequirements
BS PD ISO/TR 22100-1 : 2015	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
14/30276846 DC : 0	BS EN ISO 18217 - SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED CHAIN(S)
I.S. EN 12042:2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1034-26:2012	Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll packaging machines
11/30239643 DC : 0	BS EN ISO 13856-2 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
09/30196814 DC : 0	BS ISO 11680-2 - MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE
12/30273148 DC : 0	BS EN 15467 - FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
10/30238615 DC : DRAFT NOV 2010	BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
ISO 16090-1:2017	Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements
12/30243459 DC : 0	BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH'
15/30329716 DC	BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements
UNE-EN 1870-18:2013	Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws
UNE-EN 15571:2015	Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines
16/30331355 DC : 0	BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES
DIN EN 15954-2:2013-11	Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements
14/30299146 DC : 0	BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS ISO 17842-2:2015	Safety of amusement rides and amusement devices Operation and use
DIN EN ISO 11806-2:2012-04	Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)
I.S. EN 16474:2015	PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS
DIN EN 1034-27:2012-12	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems
DIN ISO 20966:2008-04	AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING
ANSI/ISO 12100 : 2012	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
ISO 13578:2017	Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces
BS EN ISO 13856-1:2013	Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
BS EN ISO 23125:2015	Machine tools. Safety. Turning machines
PD ISO/TR 17529:2014	Machine tools. Practical guidance and example of risk assessment on electro-discharge machines
11/30245401 DC : 0	BS EN 1034-8 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
ANSI B11.11 : 2001 : R2012	SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES
BS ISO 22673:2008	Ships and marine technology. Launching appliances for free-fall lifeboats
UNE-EN ISO 18217:2016	Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
CSA Z142 : 2010 : FR	CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS
UNE-EN ISO 13856-3:2013	Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)
04/30115437 DC : 0	ISO 5598 - FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY
ANSI B11.8:2001(R2012)	SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
ANSI B11.11 : 2001 : R2007	SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES
CSA Z142 :2010	CODE FOR POWER PRESS OPERATION: HEALTH, SAFETY, AND SAFEGUARDING REQUIREMENTS
ISO 19085-5:2017	Woodworking machines — Safety — Part 5: Dimension saws
ONORM EN 1501-5 : 2012	REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES
I.S. EN 16228-1:2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
I.S. EN 1034-8:2012	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS
I.S. EN ISO 19085-1:2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
I.S. EN ISO 13856-1:2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
I.S. EN 1870-19:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
BS EN ISO 19085-1:2017	Woodworking machines. Safety Common requirements
UNE-EN ISO 11806-2:2012	Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)
ISO 19085-3:2017	Woodworking machines Safety requirements Part 3: Numerically controlled (NC) boring and routing machines
DIN EN ISO 16089:2016-06	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015)
EN ISO 18217:2015	Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)
ISO 18652:2005	Building construction machinery and equipment External vibrators for concrete
UNI EN 1672-1 : 2014	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
15/30279801 DC : 0	BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
ANSI/ISO 12100-2 : 2007	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
I.S. EN ISO 23125:2015	MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015)
I.S. EN ISO 11680-2:2011	MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLEMOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACKPACK POWER SOURCE (ISO 11680-2:2011)
IEC 62840-2:2016	Electric vehicle battery swap system - Part 2: Safety requirements
I.S. EN ISO 12100:2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
DIN EN 1870-4:2012-06	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 415-6:2013-09	Safety of packaging machines - Part 6: Pallet wrapping machines
DIN EN 1501-1:2016-03	Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles (includes Amendment A1:2015)
DIN EN 1870-5:2013-01	Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines (includes Amendment A2:2012)
DIN EN 13289:2015-12 (Draft)	Pasta processing plant - Dryers and coolers - Safety and hygiene requirements; German and English version prEN 13289:2015
DIN EN ISO 13849-1:2016-06	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
DIN EN ISO 11680-2:2012-04	Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)
DIN EN 13524:2014-07	Highway maintenance machines - Safety requirements (includes Amendment A2:2014)
DIN EN 289:2014-09	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
DIN EN 13871:2015-01	FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1870-8:2012	Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
UNE-EN 12779:2016	Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
PD ISO/TR 18569:2004	Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
UNE-EN ISO 4254-1:2016	Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)
UNE-EN 1808:2016	Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
BS EN 848-3:2012	Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines
DD ISO/TS 20100:2008	Gaseous hydrogen. Fuelling stations
BS EN 415-6:2013	Safety of packaging machines Pallet wrapping machines
BS EN 1953:2013	Atomising and spraying equipment for coating materials. Safety requirements
ISO 28881:2013	Machine tools Safety Electro-discharge machines
I.S. EN 860:2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN 13852-1:2013	Cranes. Offshore cranes General-purpose offshore cranes
BS EN ISO 10472-1:2008	Safety requirements for industrial laundry machinery Common requirements
BS EN 1870-14 : 2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
BS EN 1870-17 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
ISO 13849-2:2012	Safety of machinery — Safety-related parts of control systems — Part 2: Validation
EN 16228-6:2014	Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
EN 1012-3:2013	Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN 1034-3:2011	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
DIN EN 815:1996-11	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
UNI EN ISO 11680-2 : 2012	MACHINERY FOR FORESTRY - SAFETY REQUIREMENTS AND TESTING FOR POLE-MOUNTED POWERED PRUNERS - PART 2: MACHINES FOR USE WITH BACK-PACK POWER SOURCE
EN 1034-16:2012	Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines
EN 13223:2015	Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
EN ISO 11680-2:2011	Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)
DIN EN 983:1996-09	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
DIN EN 983:2009-06	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
EN 12750:2013	Safety of woodworking machines - Four sided moulding machines
DIN EN 815:2009-12	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
EN 12111:2014	Tunnelling machines - Road headers and continuous miners - Safety requirements
EN 13463-5:2011	Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
UNE-EN 860:2007+A2:2012	Safety of woodworking machines - One side thickness planing machines
UNE-EN 1870-17:2013	Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
UNE-EN 848-2:2007+A1:2010	Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
UNE-EN 848-2:2007	Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines
ONORM EN 1417 : 2015	PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
CEI EN IEC 62061:2023	Safety of machinery - Functional safety of safety-related control systems
UNE-EN 1870-5:2003	Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines.
UNE-EN 859:2008+A2:2012	Safety of woodworking machines - Hand fed surface planing machines
ONORM EN 1570-1 : 2014	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
UNE-EN 1570-1:2012	Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings
UNE-EN 1501-1:2012	Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

ISO 6301-1:2017	Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 19973-3:2015	Pneumatic fluid power Assessment of component reliability by testing Part 3: Cylinders with piston rod
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
IEC 61000-6-2:2016	Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
ISO 13732-1:2006	Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 19973-2:2015	Pneumatic fluid power Assessment of component reliability by testing Part 2: Directional control valves
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 19973-4:2014	Pneumatic fluid power — Assessment of component reliability by testing — Part 4: Pressure regulators
IEC 61310-3:2007	Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
ISO 3740:2000	Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards
ISO 13851:2002	Safety of machinery Two-hand control devices Functional aspects and design principles
ISO 19973-1:2015	Pneumatic fluid power Assessment of component reliability by testing Part 1: General procedures
ISO 14121-1:2007	Safety of machinery Risk assessment Part 1: Principles
AS/NZS 4024.1603:2019	Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up
ISO 6953-1:2015	Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
ISO 3746:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
IEC 61000-6-4:2006+AMD1:2010 CSV	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO 5782-1:2017	Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Shopping Cart

ISO 4414:2010

Pneumatic fluid power General rules and safety requirements for systems and their components

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory