ISO 4287:1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
12-20-2021
Superseded by
Published date
04-03-1997
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Supersedes ISO 4287-1 (04/2001)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| JIS B0601:2001 | Identical |
| JIS B 0601:2013 | Identical |
| ONORM EN ISO 4287 : 2012 | Identical |
| GOST R ISO 4287 : 2014 | Identical |
| NF EN ISO 4287 : 1998 AMD 1 2009 | Identical |
| NBN EN ISO 4287 : 1998 AMD 1 2009 | Identical |
| NEN EN ISO 4287 : 2007 AMD 1 2009 | Identical |
| NEN ISO 4287 : 98 C2 2005 | Identical |
| NS EN ISO 4287 : 1998 AMD 1 2009 | Identical |
| I.S. EN ISO 4287:1999 | Identical |
| PN EN ISO 4287 : 1999 AMD 1 2010 | Identical |
| SN EN ISO 4287 : 1999 AMD 1 2009 | Identical |
| UNI EN ISO 4287 : 2009 | Identical |
| BIS IS 15262 : 2002 | Identical |
| BS EN ISO 4287 : 2000 | Identical |
| DIN EN ISO 4287:2010-07 | Identical |
| BS ISO 4287:1997 | Identical |
| UNE-EN ISO 4287:1999 | Identical |
| PNE-prEN ISO 4287 | Identical |
| BS EN ISO 4287:1998+A1:2009 | Identical |
| EN ISO 4287:1998 | Identical |
| DIN ISO 16260:2016-10 (Draft) | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| I.S. EN ISO 15630-3:2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| DIN ISO 10110-8:2012-02 | Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture; roughness and waviness (ISO 10110-8:2010) |
| BS EN 62444:2013 | Cable glands for electrical installations |
| BS ISO 5781:2000 | Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces |
| 13/30270995 DC : 0 | BS ISO/IEC 8484 - INFORMATION TECHNOLOGY - MAGNETIC STRIPES ON SAVINGSBOOKS |
| ISO/TS 17450-2:2002 | Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
| 07/30170832 DC : DRAFT AUG 2007 | BS ISO 25178-602 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| 06/30157850 DC : 0 | BS EN 13083 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| 14/30303794 DC : 0 | BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS ISO 12301:2007 | Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics |
| ISO 9652-4:2000 | Masonry Part 4: Test methods |
| 06/30153650 DC : DRAFT JULY 2006 | EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| I.S. EN 10329:2006 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| PREN 438-2 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS ISO 14627:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method |
| ISO 11749:2014 | Belt drive — V-ribbed belts for the automotive industry — Fatigue test |
| 04/30098257 DC : DRAFT MAY 2004 | EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| I.S. EN 1071-3:2005 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST |
| 11/30173941 DC : 0 | BS EN ISO 27509 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
| ISO 17440:2014 | Cranes General design Limit states and proof of competence of forged steel hooks |
| 02/712417 DC : DRAFT OCT 2002 | PREN 10049 - MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| 12/30242502 DC : DRAFT MAR 2012 | BS ISO 16525-3 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 3: DETERMINATION OF HEAT TRANSFER PROPERTIES |
| I.S. EN 12761-3:2001 | AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 3: AIR-ASSISTED SPRAYERS FOR BUSH AND TREE CROPS |
| BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
| 11/30199166 DC : 0 | BS ISO 11952 - SURFACE CHEMICAL ANALYSIS - SCANNING PROBE MICROSCOPY - DETERMINATION OF GEOMETRIC QUANTITIES USING SPM - CALIBRATION OF MEASURING SYSTEMS |
| BS ISO 6194-2:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Vocabulary |
| 04/30074924 DC : DRAFT JUNE 2004 | EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| I.S. EN 1724:1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION |
| 09/30207175 DC : 0 | BS EN 62276 - SINGLE CRYSTAL WAFERS FOR SURFACE ACOUSTIC WAVE (SAW) DEVICE APPLICATIONS - SPECIFICATIONS AND MEASURING METHOD |
| ISO 16525-3:2014 | Adhesives — Test methods for isotropic electrically conductive adhesives — Part 3: Determination of heat-transfer properties |
| BS ISO 4211-2:2013 | Furniture. Tests for surface finishes Assessment of resistance to wet heat |
| BS EN ISO 25178-701:2010 | Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments |
| 13/30286407 DC : 0 | BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| BS EN ISO 25178-604:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| DIN EN ISO 15324:2008-07 | Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test (ISO 15324:2000) |
| ISO 19477:2016 | Metallic and other inorganic coatings Measurement of Young's modulus of thermal barrier coatings by beam bending |
| DD ISO/TS 16610-32:2009 | Geometrical product specifications (GPS). Filtration Robust profile filters. Spline filters |
| BS EN ISO 12780-2:2011 | Geometrical product specifications (GPS). Straightness Specification operators |
| I.S. EN 12761-2:2001 | AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 2: FIELD CROP SPRAYERS |
| 17/30302767 DC : 0 | BS ISO 13779-2 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 2: THERMALLY SPRAYED COATINGS OF HYDROXYAPATITE |
| 11/30243507 DC : 0 | BS EN ISO 25178-70 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| UNE-EN ISO 14644-9:2014 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| 05/30109548 DC : DRAFT JAN 2005 | ISO 14880-4 - MICROLENS ARRAYS - PART 4: TEST METHODS FOR NON-OPTICAL PROPERTIES |
| 05/30132854 DC : DRAFT APR 2005 | EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| 06/30145675 DC : DRAFT SEP 2006 | ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS |
| BS ISO 5599-2:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector |
| 09/30201500 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED AND COLD SIZED SQUARE AND RECTANGULAR TUBES |
| UNE-EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| 10/30197641 DC : 0 | BS ISO 7207-2 - IMPLANTS FOR SURGERY - COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METAL, CERAMIC AND PLASTICS MATERIALS |
| DIN ISO 14635-2:2010-01 | Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004) |
| PREN ISO 12780-2 : DRAFT 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| CSA ISO/IEC 7811-6 : 2015 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 6: MAGNETIC STRIPE - HIGH COERCIVITY |
| UNI EN ISO 12780-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| 09/30209365 DC : DRAFT NOV 2009 | BS EN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| BS EN ISO 16119-3:2013 | Agricultural and forestry machinery. Environmental requirements for sprayers Sprayers for bush and tree crops |
| UNE-EN 15129:2011 | Anti-seismic devices |
| 15/30329716 DC | BS EN 13289. Pasta processing plants. Dryers and coolers. Safety and hygiene requirements |
| 10/30197234 DC : 0 | BS ISO 28703 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR THERMAL SHOCK RESISTANCE OF POROUS CERAMICS |
| DD CEN ISO/TS 12780-2:2007 | Geometrical product specifications (GPS). Straightness Specification operators |
| BS ISO 11443:2014 | Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers |
| DIN EN ISO 17450-2:2013-04 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| NF EN ISO 1133-1 : 2012 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
| 12/30262897 DC : DRAFT JUNE 2012 | BS EN 1674 - FOOD PROCESSING MACHINERY - DOUGH SHELTERS - SAFETY AND HYGIENE REQUIREMENTS |
| 12/30248590 DC : 0 | BS ISO 14577-3 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| BS EN ISO 16859-1:2015 | Metallic materials. Leeb hardness test Test method |
| BS ISO 12085 : 96 AMD 9951 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS |
| 12/30261828 DC : 0 | BS ISO 815-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 2: AT LOW TEMPERATURES |
| 14/30304019 DC : 0 | BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES |
| 04/30078983 DC : DRAFT OCT 2004 | ISO 22088-4 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD |
| 15/30325000 DC : 0 | BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| UNI EN ISO 15630-3 : 2010 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| DIN EN 15166:2010-02 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| 05/30130669 DC : DRAFT MAR 2005 | BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS ISO 19487:2016 | Metallic and other inorganic coatings. Electrodeposited nickel-ceramics composite coatings |
| ISO 5287:2003 | Belt drives Narrow V-belts for the automotive industry Fatigue test |
| 16/30282721 DC : 0 | BS ISO 18487-1 - AEROSPACE SERIES - TITANIUM TUBE FOR 35MPA OPERATING PRESSURE - PART 1: INCH SERIES |
| BS ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Calculation of tooth bending strength |
| 05/30032019 DC : DRAFT SEP 2005 | ISO 6194-1 - ROTARY SHAFT LIP TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| UNE-EN ISO 7963:2011 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
| 10/30201497 DC : 0 | BS EN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 04/30074898 DC : DRAFT MAY 2004 | EN ISO 4545-3 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 03/114108 DC : DRAFT AUG 2003 | EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| 10/30234619 DC : 0 | BS EN 14420-2 - HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| BS ISO 28703:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal-shock resistance of porous ceramics |
| BS ISO 3290-1:2014 | Rolling bearings. Balls Steel balls |
| BS EN ISO 25178-605:2014 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (point autofocus probe) instruments |
| 15/30324532 DC : 0 | BS ISO 20808 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF MONOLITHIC CERAMICS BY BALL-ON-DISC METHOD |
| 11/30251971 DC : 0 | BS EN 12041 - FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| 10/30234423 DC : 0 | BS EN ISO 16119-2 - AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 2: FIELD CROP SPRAYERS |
| 08/30184289 DC : DRAFT SEP 2008 | BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| DIN EN ISO 25178-701:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| S.R. CEN/TS 16165:2016 | DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION |
| BS ISO/IEC 15457-2:2007 | Identification cards. Thin flexible cards Magnetic recording technique |
| DD ISO/TS 10993-19:2006 | Biological evaluation of medical devices Physico-chemical, morphological and topographical characterization of materials |
| I.S. EN ISO 17450-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
| UNE-EN ISO 17450-2:2015 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| BS ISO 9084:2000 | Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements |
| INCITS/ISO/IEC 7811-6 : 2015 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 6: MAGNETIC STRIPE - HIGH COERCIVITY |
| ISO 7206-2:2011 | Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials |
| ISO 9981:1998 | Belt drives Pulleys and V-ribbed belts for the automotive industry PK profile: Dimensions |
| EN 15129:2018 | Anti-seismic devices |
| ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
| UNE-EN ISO 25178-602:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| CSA ISO/IEC 22050 : 2004 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT |
| I.S. EN ISO 14607:2009 | NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS (ISO 14607:2018) |
| CSA C62155 : 2006 : R2015 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| SAE AS27196B | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROCARBON RUBBER, AMS7276 |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| EN IEC 60099-8:2018 | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| ISO 23519:2010 | Sintered metal materials, excluding hardmetals Measurement of surface roughness |
| I.S. EN 16281:2013 | CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 13091-1:2001 | Mechanical vibration Vibrotactile perception thresholds for the assessment of nerve dysfunction Part 1: Methods of measurement at the fingertips |
| I.S. EN IEC 60099-8:2018 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| CEI EN 50526-1 : 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| 16/30322240 DC : 0 | BS EN 14535-2 - RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS |
| AWS C4.6M : 2006 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| I.S. EN ISO 16859-1:2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015) |
| S.R. CEN TS 13001-3-5:2010 | CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATES AND PROOF OF COMPETENCE OF FORGED HOOKS |
| I.S. EN 16282-2:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| I.S. EN ISO 16859-3:2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS (ISO 16859-3:2015) |
| I.S. EN 16452:2015+A1:2019 | RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS |
| ISO 8399-2:1998 | Aerospace — Accessory drives and mounting flanges (Metric series) — Part 2: Dimensions |
| UNI ISO 10817-1 : 2011 | ROTATING SHAFT VIBRATION MEASURING SYSTEMS - PART 1: RELATIVE AND ABSOLUTE SENSING OF RADIAL VIBRATION |
| ISO 6195:2013 | Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances |
| ISO 8124-1:2018 | Safety of toys — Part 1: Safety aspects related to mechanical and physical properties |
| UNE-EN 60099-4:2016 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| CSA ISO 5362 : 2014 | ANAESTHETIC RESERVOIR BAGS |
| EN 12331:2015 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| 18/30365854 DC : 0 | BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| BS ISO 254:2011 | Belt drives. Pulleys. Quality, finish and balance |
| UNI EN ISO 25178-6 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
| BS EN 12697-31:2007 | Bituminous mixtures. Test methods for hot mix asphalt Specimen preparation by gyratory compactor |
| DIN EN 15129:2010-06 | ANTI-SEISMIC DEVICES |
| ISO 14607:2007 | Non-active surgical implants Mammary implants Particular requirements |
| BIS IS 10187 : 2013 | HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES |
| EN 71-8:2018 | Safety of toys - Part 8: Activity toys for domestic use |
| UNI EN ISO 17450-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
| I.S. EN ISO 13287:2012 | PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012) |
| DIN EN 1672-2:2009-07 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements (includes Amendment A1:2009) |
| DIN EN 1673:2010-10 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009) |
| I.S. EN 12390-4:2000 | TESTING HARDENED CONCRETE - PART 4: COMPRESSIVE STRENGTH - SPECIFICATION FOR TESTING MACHINES |
| DIN EN 13288:2010-10 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 1759-1:2005-02 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| DIN EN 12852:2011-02 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13081:2012-05 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (includes Amendment A1:2012) |
| DIN EN 13591:2010-10 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN ISO 14577-3:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
| DIN EN ISO 6508-3:2015-06 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| DIN EN 13389:2010-10 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009) |
| BS EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings |
| BS EN ISO 1302:2002 | Geometrical product specifications (GPS). Indication of surface texture in technical product documentation |
| BS EN ISO 14880-4:2006 | Optics and photonics. Microlens arrays Test methods for geometrical properties |
| BS EN ISO 3274:1998 | Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments |
| BS EN 12852 : 2001 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13954 : 2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12984 : 2005 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 15183:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test |
| BS EN ISO 4288:1998 | Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture |
| UNE-EN ISO 11114-4:2017 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) |
| BS EN 623-4:2004 | Advanced technical ceramics. Monolithic ceramics. General and textural properties Determination of surface roughness |
| BS EN 13311-5:2001 | Biotechnology. Performance criteria for vessels Kill tanks |
| BS EN 10305-2:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes |
| UNE-EN ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012) |
| BS EN ISO 12085 : 1998 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS |
| BS EN 454:2014 | Food processing machinery. Planetary mixers. Safety and hygiene requirements |
| DIN EN 10305-1:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| BS EN ISO 5436-1:2001 | Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards |
| BS EN 13886 : 2005 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12721 : 2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT |
| BS EN 12853 : 2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12571:1999 | Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing |
| BS EN 1678 : 1998 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1673 : 2000 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 1672-2:2005+A1:2009 | Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
| EN 13870:2015 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| I.S. EN 13871:2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13951:2012 | LIQUID PUMPS - SAFETY REQUIREMENTS - AGRIFOODSTUFFS EQUIPMENT; DESIGN RULES TO ENSURE HYGIENE IN USE |
| I.S. EN 10305-2:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| DIN EN 12851:2010-10 | FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13570:2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 454:2014 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 60099-4:2014 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| EN ISO 12780-2:2011 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| EN ISO 13287:2012 | Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012) |
| EN 13001-3-3:2014 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
| CEN ISO/TS 12181-2:2007 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003) |
| EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 12722:2009+A1:2013 | Furniture - Assessment of surface resistance to dry heat |
| EN 62444:2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| EN 13231-4:2013 | Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings |
| EN 12761-3:2001 | Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - Part 3: Air-assisted sprayers for bush and tree crops |
| EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
| EN 13311-1:2001 | Biotechnology - Performance criteria for vessels - Part 1: General performance criteria |
| EN 12952-3:2011 | Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
| EN 12571:1998 | Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing |
| EN 13083:2008+A1:2013 | Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading |
| EN 12355:2003+A1:2010 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
| EN 10339:2007 | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| EN 12852:2001+A1:2010 | Food processing machinery - Food processors and blenders - Safety and hygiene requirements |
| EN ISO 14638:2015 | Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
| EN 12043:2014 | Food processing machinery - Intermediate provers - Safety and hygiene requirements |
| DIN EN ISO 15732:2005-09 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) |
| EN 13208:2003+A1:2010 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
| EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| DIN EN 13001-3-3:2015-02 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| EN 12390-4:2000 | Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
| EN 12462:1998 | Biotechnology - Performance criteria for pumps |
| EN 12041:2014 | Food processing machinery - Moulders - Safety and hygiene requirements |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN 13534:2006+A1:2010 | Food processing machinery - Curing injection machines - Safety and hygiene requirements |
| EN 13311-5:2001 | Biotechnology - Performance criteria for vessels - Part 5: Kill tanks |
| EN 13312-1:2001 | Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| EN 1337-2:2004 | Structural bearings - Part 2: Sliding elements |
| EN 12561-6:2011 | Railway applications - Tank wagons - Part 6: Manholes |
| EN 1071-2:2002 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method |
| EN 13231-3:2012 | Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track |
| EN 13081:2008+A1:2012 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler |
| EN 12690:1999 | Biotechnology - Performance criteria for shaft seals |
| I.S. EN ISO 1302:2002 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION |
| EN 1337-6:2004 | Structural bearings - Part 6: Rocker bearings |
| EN 1071-1:2003 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer |
| EN 12854:2003+A1:2010 | Food processing machinery - Beam mixers - Safety and hygiene requirements |
| CEN ISO/TS 12780-2:2007 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003) |
| EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| DIN EN ISO 11114-4:2017-09 | TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017) |
| ONORM EN 12355 : 2011 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ONORM EN ISO 293 : 2005 | PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
| VDI/VDE 2252 Blatt 2:2007-09 | Precision engineering components - Guides - Synthetic gliding bearings |
| EN 50368:2003 | Cable cleats for electrical installations |
| DD CEN/TS 13001-3-5:2010 | Cranes. General design Limit states and proof of competence of forged hooks |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| ISO 16589-1:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances |
| DIN EN 12722:2014-02 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT |
| ISO 14627:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method |
| 09/30200407 DC : 0 | BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| 12/30237808 DC : DRAFT JUNE 2012 | BS ISO 19631 - AEROSPACE - TUBE FITTINGS FOR FLUID SYSTEMS, 5000 PSI (35000 KPA) - QUALIFICATION SPECIFICATION |
| 13/30273328 DC : 0 | BS ISO 16610-32 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 32: ROBUST PROFILE FILTERS: SPLINE FILTERS |
| DIN EN ISO 1133-1:2012-03 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| BS EN ISO 27509:2012 | Petroleum and natural gas industries. Compact flanged connections with IX seal ring |
| DIN EN ISO 7963:2010-12 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
| DIN ISO 14635-3:2011-08 | Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005) |
| BS ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures |
| BS ISO 13473-2:2002 | Characterization of pavement texture by use of surface profiles Terminology and basic requirements related to pavement texture profile analysis |
| DD ENV 13287:2002 | Safety, protective and occupational footwear for professional use. Test method for the determination of slip resistance |
| BS ISO 16525-3:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of heat-transfer properties |
| DD ISO/TS 16610-1:2006 | Geometrical product specifications (GPS). Filtration Overview and basic concepts |
| 07/30162647 DC : 0 | BS ISO 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
| BS ISO 9083:2001 | Calculation of load capacity of spur and helical gears. Application to marine gears |
| BS ISO 18535:2016 | Diamond-like carbon films. Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method |
| BS ISO 14999-4:2015 | Optics and photonics. Interferometric measurement of optical elements and optical systems Interpretation and evaluation of tolerances specified in ISO 10110 |
| BS ISO 19631:2015 | Aerospace series. Tube fittings for fluid systems, 5 080 psi (35 000 kPa). Qualification specification |
| DIN ISO 815-2:2016-09 | Rubber, vulcanized or thermoplastic - Determination of compression set - Part 2: At low temperatures (ISO 815-2:2014) |
| CEI EN 62217 : 2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| UNI EN ISO 12181-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| 04/30095200 DC : DRAFT MAY 2004 | EN ISO 6506-3 - METALLIC MATERIALS. BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 15/30318551 DC : 0 | BS EN 62276 ED. 3.0 - SINGLE CRYSTAL WAFERS FOR SURFACE ACOUSTIC WAVE (SAW) DEVICE APPLICATION - SPECIFICATIONS AND MEASURING METHODS |
| ISO 4401:2005 | Hydraulic fluid power — Four-port directional control valves — Mounting surfaces |
| 10/30234427 DC : 0 | BS EN ISO 16119-3 - AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - ENVIRONMENTAL PROTECTION - PART 3: AIR-ASSISTED SPRAYERS FOR BUSH AND TREE CROPS |
| 13/30285283 DC : 0 | BS EN 13001-3-5 - CRANES - GENERAL DESIGN - PART 3-5: LIMIT STATE AND PROOF OF COMPETENCE OF FORGED HOOKS |
| UNE-EN 13001-3-3:2015 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
| BS ISO 15407-2:2003 | Pneumatic fluid power. Five-port directional control valves, sizes 18 mm and 26 mm Mounting interface surfaces with optional electrical connector |
| BS ISO 17296-4 : 2014 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 4: OVERVIEW OF DATA PROCESSING |
| 13/30263776 DC : 0 | BS ISO 6506-3 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 12/30260942 DC : 0 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| 13/30269778 DC : 0 | BS ISO/IEC 7811-6 - IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 6: MAGNETIC STRIPE - HIGH COERCIVITY |
| BS ISO 10110-8:2010 | Optics and photonics. Preparation of drawings for optical elements and systems Surface texture; roughness and waviness |
| PREN 14535-2 : DRAFT 2016 | RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 2: BRAKE DISCS MOUNTED ONTO THE WHEEL, DIMENSIONS AND QUALITY REQUIREMENTS |
| BS EN 13001-3-3:2014 | Cranes. General design Limit states and proof of competence of wheel/rail contacts |
| 15/30289820 DC : 0 | BS EN ISO 4545-3 - METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 03/317249 DC : DRAFT OCT 2003 | ISO 12986-2 - CARBONACEOUS MATERIALS USED IN THE PRODUCTION OF ALUMINIUM - PREBAKED ANODES AND CATHODE BLOCKS - PART 2: DETERMINATION OF FLEXURAL STRENGTH BY THE FOUR-POINT METHOD |
| BS ISO 15341:2014 | Graphic technology. Method for radius determination of printing cylinders |
| BS ISO 1099:2017 | Metallic materials. Fatigue testing. Axial force-controlled method |
| 11/30217708 DC : 0 | BS ISO 14628 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ROLLING CONTACT FATIGUE OF SILICON NITRIDE CERAMICS AT ROOM TEMPERATURE BY BALLS-ON-FLAT METHOD |
| 13/30291469 DC : 0 | BS EN 13870 - FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 16/30316689 DC : 0 | BS ISO 7207-2 AMD 1 - IMPLANTS FOR SURGERY - COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METAL, CERAMIC AND PLASTICS MATERIALS |
| 10/30234330 DC : DRAFT DEC 2010 | BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| BS ISO 3384-2:2012 | Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression Testing with temperature cycling |
| BS EN ISO 17450-2:2012 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
| SAE AS27197B | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268 |
| I.S. EN 62444:2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD)) |
| 07/30131653 DC : 0 | BS ISO 6194-2 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 2: VOCABULARY |
| 16/30346239 DC : 0 | BS ISO 8364 - ALPINE SKIS AND BINDINGS - BINDING MOUNTING AREA - REQUIREMENTS AND TEST METHODS |
| PREN 62444 : DRAFT 2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| CEI EN 62155 : 2004 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| DIN ISO 14635-1:2006-05 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000) |
| 03/314803 DC : DRAFT SEP 2003 | ISO 6336-2 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 2: CALCULATION OF SURFACE DURABILITY (PITTING) |
| ISO 15341:2014 | Graphic technology Method for radius determination of printing cylinders |
| DIN ISO 16260 E : 2017 | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| BS EN 16701:2014 | Energetic materials for defence. Safety, vulnerability. Friability |
| UNE-ISO 3384-1:2017 | Rubber, vulcanize or thermoplastic. Determination of stress relaxation in compression. Part 1: Testing at constant temperature |
| 08/30154948 DC : DRAFT FEB 2008 | BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE) |
| BS EN ISO 16946:2017 | Non-destructive testing. Ultrasonic testing. Specification for step wedge calibration block |
| BS EN 50526-2:2014 | Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices |
| 04/104967 DC : DRAFT APR 2004 | ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| NF EN 62155 : 2003 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| 11/30251968 DC : 0 | BS EN 454 - FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| 06/30152318 DC : DRAFT JUL 2006 | BS EN 12721 - FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT |
| 06/30152321 DC : 0 | BS EN 12722 - FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT |
| 13/30246059 DC : 0 | BS ISO 15341 - GRAPHIC TECHNOLOGY - METHOD FOR RADIUS DETERMINATION OF PRINTING CYLINDERS |
| EN 13001-3-5:2016 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| 10/30204467 DC : 0 | BS ISO 16589-2 - ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 2: VOCABULARY |
| BS ISO 13179-1:2014 | Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants General requirements |
| 13/30269775 DC : 0 | BS ISO/IEC 7811-2 - IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE |
| PREN 10049 : DRAFT 2013 | MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| 03/306830 DC : DRAFT APR 2003 | ISO 18669-2 - INTERNAL COMBUSTION ENGINES - PISTONS PINS - PART 2: INSPECTION MEASURING PRINCIPLES |
| 12/30259995 DC : 0 | BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 50526-1:2012 | Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters |
| 07/30144373 DC : 0 | BS ISO 3601-2 - FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS |
| DIN EN ISO 25178-605:2014-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014) |
| 12/30212355 DC : 0 | BS ISO 13179-1 - IMPLANTS FOR SURGERY - PLASMA SPRAYED COATINGS OF UNALLOYED TITANIUM - PART 1: GENERAL REQUIREMENTS |
| BS ISO 17170:2015 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for spherical indentation of porous ceramics |
| UNI EN ISO 25178-701 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| ISO 27307:2015 | Thermal spraying Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing |
| DD CEN ISO/TS 12181-2 : DRAFT 2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| BS EN 16743:2016 | Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements |
| DIN EN ISO 16119-4:2015-04 | AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 4: FIXED AND SEMI-MOBILE SPRAYERS (ISO 16119-4:2014) |
| 09/30185454 DC : 0 | BS ISO 10110-8 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE |
| 12/30261825 DC : 0 | BS ISO 815-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT AMBIENT OR ELEVATED TEMPERATURES |
| BS ISO 17744:2004 | Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method |
| CSA C62155:2006 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| 04/30125823 DC : DRAFT NOV 2004 | ISO 17092 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF CORROSION RESISTANCE OF MONOLITHIC CERAMICS IN ACID AND ALKALINE SOLUTIONS |
| 13/30278066 DC : 0 | BS EN ISO 16119-4 - AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS AND TESTING FOR SPRAYERS - PART 4: FIXED AND SEMI-MOBILE SPRAYERS |
| I.S. EN 15129:2009 | ANTI-SEISMIC DEVICES |
| PREN 12697-31 : DRAFT 2014 | BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| BS ISO 815-1:2014 | Rubber, vulcanized or thermoplastic. Determination of compression set At ambient or elevated temperatures |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| 04/30106630 DC : DRAFT APR 2004 | BS ISO 21182 - LIGHT CONVEYOR BELTS - TEST METHODS FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION |
| S.R. CEN ISO TS 12181-2:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| ISO/TR 6336-30:2017 | Calculation of load capacity of spur and helical gears — Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5 |
| BS ISO 16589-1 : 2011 | ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| ISO 3384-1:2011 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature |
| UNI EN 15165 : 2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-ISO 815-2:2011 | Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures |
| BS ISO 3384-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| UNE-EN ISO 12181-2:2012 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| I.S. EN ISO 16119-4:2014 | AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 4: FIXED AND SEMI-MOBILE SPRAYERS (ISO 16119-4:2014) |
| I.S. EN ISO 12181-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| 16/30337802 DC : 0 | BS EN 1974 - FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 14535-1 : DRAFT 2016 | RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS |
| I.S. EN 50262:1999 | METRIC CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| I.S. EN 13231-4:2013 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS |
| DIN EN ISO 16946:2016-09 (Draft) | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK (ISO 16946:2017) |
| UNI EN 16281 : 2013 | CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| BIS IS 13360-2-2 : 2013 | PLASTICS - METHODS OF TESTING - PART 2: SAMPLING AND PREPARATION OF TEST SPECIMENS - SECTION 2: COMPRESSION MOULDED TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
| IEC 60099-8:2017 | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| ONORM ISO 8364 : 2008 | ALPINE SKIS AND BINDINGS - BINDING MOUNTING AREA - REQUIREMENTS AND TEST METHODS |
| ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
| ISO 10766:2014 | Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| PREN 12041 : DRAFT 2011 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| ISO/TS 10303-5001:2010 | Industrial automation systems and integration — Product data representation and exchange — Part 5001: Guidance on the usage of ISO 10303-214 for gear units |
| ISO 5599-1:2001 | Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector |
| PREN 1974 : DRAFT 2016 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 12301:2007 | Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
| ISO 254:2011 | Belt drives — Pulleys — Quality, finish and balance |
| BS EN ISO 14607:2009 | Non-active surgical implants. Mammary implants. Particular requirements |
| UNI EN ISO 14607 : 2009 | NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS |
| BS EN 15129:2009 | Anti-seismic devices |
| ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
| I.S. EN ISO 25178-70:2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| NF EN ISO 7963 : 2010 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING SPECIFICATION FOR CALIBRATION BLOCK NO 2 |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| DIN EN 12042:2014-07 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 15129 : 2009 | ANTI-SEISMIC DEVICES |
| BS ISO/IEC 7811-2:2014 | Identification cards. Recording technique Magnetic stripe. Low coercivity |
| UNI EN 12042 : 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN ISO 25178-6:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009) |
| UNE-EN 16282-4:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements |
| PREN 1337-6 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| CEI EN 60099-4 : 2015 | SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS |
| UNI EN ISO 16119-3 : 2013 | AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 3: SPRAYERS FOR BUSH AND TREE CROPS |
| NACE TM 01 98 : 2016 | SLOW STRAIN RATE TEST METHOD FOR SCREENING CORROSION-RESISTANT ALLOYS FOR STRESS CORROSION CRACKING IN SOUR OILFIELD SERVICE |
| CEI EN 62444 : 2014 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| I.S. EN ISO 27509:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012) |
| UNI EN ISO 7963 : 2010 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR CALIBRATION BLOCK N DEGREE 2 |
| ASTM D 7127 : 2017 : REDLINE | Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument |
| EN ISO 6507-3:2018 | Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018) |
| ASTM F 2791 : 2015 : REDLINE | Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions |
| EN ISO 6506-3:2014 | Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
| ISO 15218:2003 | Pneumatic fluid power — 3/2 solenoid valves — Mounting interface surfaces |
| I.S. EN ISO 12085:1998 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| IEC TS 61994-4-4:2010 | Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for surface acoustic wave (SAW) devices |
| I.S. EN ISO 15324:2008 | CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST |
| DIN EN 1678:2011-02 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1674:2015-12 | FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 12984:2011-02 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12331:2015-12 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| DIN EN ISO 14577-1:2015-11 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015 |
| DIN EN 1916:2003-04 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN ISO 14577-4:2015-05 (Draft) | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
| DIN EN 13951:2012-08 | LIQUID PUMPS - SAFETY REQUIREMENTS - AGRIFOODSTUFFS EQUIPMENT; DESIGN RULES TO ENSURE HYGIENE IN USE |
| DIN EN ISO 295:2004-05 | Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004) |
| DIN EN 10305-6:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| DIN EN ISO 20482:2014-03 | METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013) |
| DIN EN ISO 14159:2008-07 | Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002) |
| DIN EN 12041:2015-02 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 293:2005-10 | Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004) |
| DIN EN 1337-6:2004-08 | Structural bearings - Part 6: Rocker bearings |
| DIN EN 14655:2010-11 | Food processing machinery - Baguette slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN ISO 8785:1999-10 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE IMPERFECTIONS - TERMS, DEFINITIONS AND PARAMETERS |
| DIN EN ISO 9013:2003-07 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017) |
| BS EN 10049:2013 | Measurement of roughness average <i>Ra</i> and peak count <i>RPc</i> on metallic flat products |
| BS EN 13570 : 2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 1514:2004 | Paints and varnishes. Standard panels for testing |
| UNE-EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
| IEC 62276:2016 | Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods |
| UNE-EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| DIN EN 10305-3:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| BS EN ISO 20482:2013 | Metallic materials. Sheet and strip. Erichsen cupping test |
| BS EN 12884:1999 | Biotechnology. Performance criteria for centrifuges |
| BS EN 12885:1999 | Biotechnology. Performance criteria for cell disrupters |
| UNE-EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| ISO 25178-70:2014 | Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures |
| BS EN 12043:2014 | Food processing machinery. Intermediate provers. Safety and hygiene requirements |
| UNE-EN ISO 7539-1:2013 | Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012) |
| BS EN ISO 8503-4:1995 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure |
| BS EN 1071-3:2005 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of adhesion and other mechanical failure modes by a scratch test |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| ISO 21182:2013 | Light conveyor belts — Determination of the coefficient of friction |
| BS EN 13534 : 2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 1337-2:2004 | Structural bearings Sliding elements |
| I.S. EN ISO 11114-4:2017 | TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017) |
| I.S. EN 10305-5:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| I.S. EN 13954:2005 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 6508-3:2015 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3 - CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015) |
| I.S. EN 10305-6:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN 13288:2005 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12331:2015 | FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13885:2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 9013:2017 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017) |
| UNI EN 1673 : 2010 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13886:2005 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13621:2004 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 10049:2013 | MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| I.S. EN 12721:2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT |
| I.S. EN 12043:2014 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 1673:2000+A1:2009 | Food processing machinery - Rotary rack ovens - Safety and hygiene requirements |
| I.S. EN ISO 21182:2013 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION (ISO 21182:2013) |
| I.S. EN 13534:2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1071-2:2003-02 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 2: DETERMINATION OF COATING THICKNESS BY THE CRATER GRINDING METHOD |
| I.S. EN 13208:2003 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13083:2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| I.S. EN 453:2014 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1672-2 : 2009 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| I.S. EN ISO 21179:2013 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT (ISO 21179:2013) |
| DIN EN 1820:2009-12 | ANAESTHETIC RESERVOIR BAGS |
| I.S. EN ISO 293:2005 | PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
| DIN EN ISO 6506-3:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014) |
| I.S. EN ISO 8503-1:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES (ISO 8503-1:2012) |
| DIN EN 1071-3:2005-10 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST |
| I.S. EN 12355:2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 14159:2008 | SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY |
| I.S. EN 12852:2001 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 8503-4:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE (ISO 8503-4:2012) |
| I.S. EN 12851:2006 | FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 13591:2005 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12020-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN ISO 7539-1:2012 | CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 1: GENERAL GUIDANCE ON TESTING PROCEDURES (ISO 7539-1:2012) |
| I.S. EN 12984:2006 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12041:2014 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1674:2015 | FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 14577-4:2016 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
| EN ISO 17296-4:2016 | Additive manufacturing - General principles - Part 4: Overview of data processing (ISO 17296-4:2014) |
| I.S. EN 1672-2:2005 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - HYGIENE REQUIREMENTS |
| I.S. EN 13555:2014 | FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| I.S. EN 13081:2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| DIN EN ISO 1133:2000-02 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| DIN EN 12761-3:2002-01 | AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS; ENVIRONMENTAL PROTECTION - PART 3: AIR-ASSISTED SPRAYERS FOR BUSH AND TREE CROPS |
| I.S. EN 13389:2005 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 1133:2005-09 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| I.S. EN 13870:2015 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN 13555:2014 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| I.S. EN 13231-3:2012 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| I.S. EN 12952-3:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER |
| I.S. EN 12853:2001 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 6506-3:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2014) |
| I.S. EN ISO 1514:2016 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016) |
| I.S. EN 10305-4:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| I.S. EN ISO 14577-3:2015 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
| DIN EN 12761-2:2002-01 | AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS; ENVIRONMENTAL PROTECTION - PART 2: FIELD CROP SPRAYERS |
| I.S. EN 12854:2003 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 10305-1:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| I.S. EN ISO 5981:2007 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING |
| I.S. EN 10305-3:2016 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| ONORM EN 1673 : OCT 2010 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14655:2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12561-6:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| IEC 61914:2015 | Cable cleats for electrical installations |
| I.S. EN 1678:1998 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 14577-1:2015 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 1: TEST METHOD (ISO 14577-1:2015) |
| I.S. EN ISO 20482:2013 | METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013) |
| I.S. EN 13390:2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12722:2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT |
| I.S. EN 1673:2000 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 453 : 2014 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13390 : 2010 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| VDI/VDE 2655 Blatt 1.2:2010-10 | Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement |
| VDI 3414 Blatt 2:2014-02 (Draft) | Quality evaluation of wooden surfaces - Testing and measuring methods |
| VDI 2083 Blatt 17:2013-06 | Cleanroom technology - Compatibility of materials with the required cleanliness |
| VDI 5581:2011-11 | Measurement procedures for quality control in precision moulding of aspherical, freeform and microoptics |
| VDI/VDE 2655 Blatt 1.1:2008-03 | Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement |
| VDI/VDE 2631 Blatt 3:2007-08 | Form measurement - Properties and selection of filters |
| VDI 3414 Blatt 3:2014-02 (Draft) | Quality evaluation of wooden surfaces - Milled, sawn, planed, drilled and turned surfaces. |
| VDI/VDE 2656 Blatt 1:2008-06 | Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems |
| VDI/VDE 2631 Blatt 7:2012-02 | Form measurement - Determination of positional deviations of the form-measurement axes |
| VDI/VDE 2612 Blatt 5:2015-02 | Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments |
| BS 903-A61(2000) : 2000 AMD 13431 | RUBBER - DETERMINATION OF FRICTIONAL PROPERTIES |
| VDI 2083 Blatt 9.1:2006-12 | Clean room technology - Compatibility with required cleanliness and surface cleanliness |
| VDI 3431:2016-08 | Bending of profiles - Testing notes for profile bending elements |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| ONORM EN ISO 1133-1 : 2012 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011) |
| VDI/VDE 2602 Blatt 4:2014-09 | Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement |
| 15/30324994 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| PREN 10305-5 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES |
| DIN ISO 3601-2:2010-08 | Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008) |
| 16/30300288 DC : 0 | BS ISO 19606 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR SURFACE ROUGHNESS OF FINE CERAMIC FILMS BY ATOMIC FORCE MICROSCOPY |
| 16/30290361 DC : 0 | BS EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| UNI EN ISO 25178-604 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS |
| BS ISO 6621-2:2003 | Internal combustion engines. Piston rings Inspection measuring principles |
| BS EN 13231-4:2013 | Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in switches and crossings |
| BS ISO 14635-1:2000 | Gears. FZG test procedures FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils |
| 17/30356577 DC : 0 | BS EN 60099-8 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| BS ISO 9982:1998 | Belt drives. Pulleys and V-ribbed belts for industrial applications. PH, PJ, PK, PL and PM profiles. Dimensions |
| BS ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures |
| 14/30310866 DC : 0 | BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES |
| BS EN ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete. Test methods Prestressing steel |
| BS EN 16281:2013 | Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods |
| 12/30248587 DC : 0 | BS ISO 14577-1 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 1: TEST METHOD |
| 04/30111329 DC : DRAFT NOV 2004 | ISO 22214 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CYCLIC BENDING FATIGUE OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
| 13/30251855 DC : 0 | BS ISO 25178-606 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS |
| I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
| 14/30304022 DC : 0 | BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES |
| BS EN ISO 7963:2010 | Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2 |
| 06/30125744 DC : 0 | EN 13081 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| BS EN ISO 14644-9:2012 | Cleanrooms and associated controlled environments Classification of surface cleanliness by particle concentration |
| 13/30286103 DC : 0 | BS EN 12331 - FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 13871 : DRAFT 2012 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 13379 : DRAFT 2016 | PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 22088-4:2007 | PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD |
| BS ISO 3290-2:2014 | Rolling bearings. Balls Ceramic balls |
| 13/30264465 DC : 0 | BS EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| BS ISO 27307:2015 | Thermal spraying. Evaluation of adhesion/cohesion of thermal sprayed ceramic coatings by transverse scratch testing |
| BS ISO 5287:2003 | Belt drives. Narrow V-belts for the automotive industry. Fatigue test |
| ISO 13473-2:2002 | Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis |
| BS EN ISO 25178-606:2015 | Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments |
| SSPC-PA 17 : 2012 | PROCEDURE FOR DETERMINING CONFORMANCE TO STEEL PROFILE/SURFACE ROUGHNESS/PEAK COUNT REQUIREMENTS |
| I.S. EN ISO 1133:2005 | PLASTICS - DETERMINATION OF THE MELT-MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| 09/30201490 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN 16282-4:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air inlets and outlets; design and safety requirements |
| DIN EN ISO 16859-3:2016-02 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS (ISO 16859-3:2015) |
| BS ISO 11749:2014 | Belt drive. V-ribbed belts for the automotive industry. Fatigue test |
| UNI EN ISO 25178-601 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| BS ISO 12636:2018 | Graphic technology. Blankets for offset printing |
| BS EN ISO 25178-602:2010 | Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments |
| 11/30251965 DC : 0 | BS EN 453 - FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 25178-603:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
| UNI EN ISO 25178-605 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS |
| 17/30250386 DC : 0 | BS ISO 17327-1 - NON-ACTIVE SURGICAL IMPLANTS - IMPLANT COATING - PART 1: GENERAL REQUIREMENTS |
| 04/30077768 DC : DRAFT FEB 2004 | ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES |
| BS EN 60099-8:2011 | Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| UNE-EN 61914:2016 | Cable cleats for electrical installations |
| BS ISO 28704:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for cyclic bending fatigue of porous ceramics at room temperature |
| UNE-EN ISO 13287:2013 | Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012) |
| DIN EN ISO 21534:2009-08 | NON-ACTIVE SURGICAL IMPLANTS - JOINT REPLACEMENT IMPLANTS - PARTICULAR REQUIREMENTS |
| DIN EN 16743:2016-05 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS ISO 18487-1:2017 | Aerospace series. Titanium tube for 35 MPa operating pressure Inch series |
| 14/30301841 DC : 0 | BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| BS EN 15166:2008 | Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements |
| DD IEC/TS 61994-4-4:2010 | Piezoelectric and dielectric devices for frequency control and selection. Glossary Materials Materials for surface acoustic wave (SAW) devices |
| 07/30170829 DC : DRAFT AUG 2007 | BS ISO 25178-601 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| BS ISO 13565-2 : 1996 AMD 9950 | GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO CURVE |
| BS ISO 14628:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method |
| BS ISO 7207-2 : 2011 | IMPLANTS FOR SURGERY - COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METAL, CERAMIC AND PLASTICS MATERIALS |
| 09/30181706 DC : 0 | BS EN 12355:2003/A1 - FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS ISO 13091-1:2001 | Mechanical vibrations. Vibrotactile perception thresholds for the assessment of nerve dysfunction Methods of measurement at the fingertips |
| BS ISO 6263:2013 | Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces |
| 15/30279088 DC : 0 | BS ISO 18535 - DIAMOND-LIKE CARBON FILMS - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF DIAMOND-LIKE CARBON FILMS BY BALL-ON-DISC METHOD |
| DIN EN ISO 25178-70:2014-06 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| 15/30268151 DC : 0 | BS EN ISO 14577-4 - METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS |
| DIN EN 15165:2015-01 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 05/30130673 DC : DRAFT MAR 2005 | BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 16282-2:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements |
| INCITS/ISO/IEC 22050 : 2002 | INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT |
| BS EN 15165:2014 | Food processing machinery. Forming machines. Safety and hygiene requirements |
| 08/30190157 DC : DRAFT SEP 2008 | BS EN ISO 14644-9 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE PARTICLE CLEANLINESS |
| BS ISO 3274 : 1996 AMD 9919 | GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| UNE-EN 61386-25:2012 | Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices |
| BS ISO 7743:2017 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
| BS EN 16282-8:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing |
| 09/30198179 DC : 0 | BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES |
| 16/30315829 DC : 0 | BS ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION |
| BS EN 12042:2014 | Food processing machinery. Automatic dough dividers. Safety and hygiene requirements |
| UNI EN ISO 25178-602 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| NF EN ISO 25178-602 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| 04/30087406 DC : DRAFT NOV 2004 | ISO 7963 - WELDS IN STEEL - CALIBRATION BLOCK NO. 2 FOR ULTRASONIC EXAMINATION OF WELDS |
| 13/30275599 DC : 0 | BS EN 10049 - MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| 13/30263150 DC : 0 | BS EN ISO 16859-1 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD |
| ANSI/AAMI/ISO TIR10993-19:2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 19: PHYSICOCHEMICAL, MORPHOLOGICAL, AND TOPOGRAPHICAL CHARACTERIZATION OF MATERIALS |
| 11/30199626 DC : 0 | BS ISO 11894-1 - FINE CERAMIC (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR CONDUCTIVITY MEASUREMENT OF ION-CONDUCTIVE FINE CERAMICS - PART 1: OXIDE-ION-CONDUCTING SOLID ELECTROLYTES |
| 09/30198155 DC : DRAFT MAY 2009 | BS EN ISO 12181-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| 14/30310862 DC : 0 | BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| 16/30322061 DC : DRAFT MAR 2016 | BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| 17/30333744 DC : 0 | BS EN ISO 25178-600 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 600: METROLOGICAL CHARACTERISTICS FOR AREAL-TOPOGRAPHY MEASURING METHODS |
| NF ISO 10110-8 : 2010 | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE - ROUGHNESS AND WAVINESS |
| BS EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria |
| UNE-EN 14653-1:2012 | Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications |
| CEI EN 61032 : 1998 | PROTECTION OF PERSONS AND EQUIPMENT BY ENCLOSURES - PROBES FOR VERIFICATION |
| PREN 10305-6 : DRAFT 2015 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| BS ISO 14635-3:2005 | Gears. FZG test procedures FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| BS ISO 15113:2005 | Rubber. Determination of frictional properties |
| ISO 15407-2:2003 | Pneumatic fluid power — Five-port directional control valves, sizes 18 mm and 26 mm — Part 2: Mounting interface surfaces with optional electrical connector |
| UNE-EN ISO 16119-2:2013 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03) |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| BS EN ISO 25178-70:2014 | Geometrical product specification (GPS). Surface texture: Areal Material measures |
| DIN ISO 6195:2015-02 (Draft) | FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| BS ISO 815-2:2014 | Rubber, vulcanized or thermoplastic. Determination of compression set At low temperatures |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| BS ISO/IEC 7811-6:2014 | Identification cards. Recording technique Magnetic stripe. High coercivity |
| DIN EN ISO 6507-3:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| INCITS/ISO/IEC 7811-2 : 2001 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE - LOW COERCIVITY |
| DIN ISO 14999-4:2016-04 | Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 (ISO 14999-4:2015) |
| CSA C22.2 No. 18.3 : 2012 | CONDUIT, TUBING, AND CABLE FITTINGS |
| DIN EN ISO 25178-603:2014-02 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
| PREN 71-1 : DRAFT 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| SAE AS27194A | SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315 |
| SAE AS27198B | SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988 |
| BS ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Basic principles, introduction and general influence factors |
| API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| I.S. EN ISO 2431:2011 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
| BS ISO 7368:2016 | Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities |
| CSA ISO/IEC 7811-2 : 2002 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE - LOW COERCIVITY |
| BS EN 16452:2015+A1:2019 | Railway applications. Braking. Brake blocks |
| UNE-EN ISO 16946:2017 | Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017) |
| I.S. EN ISO 17296-4:2016 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 4: OVERVIEW OF DATA PROCESSING (ISO 17296-4:2014) |
| ISO 14628:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method |
| API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| I.S. EN 16743:2016 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 71-1 : 2015 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| I.S. EN ISO 16946:2017 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK (ISO 16946:2017) |
| I.S. EN ISO 14644-9:2012 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION (ISO 14644-9:2012) |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| ISO 815-2:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 2: At low temperatures |
| NF EN 61914 : 2016 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| UNI EN ISO 25178-70 : 2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| I.S. EN 15165:2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 50368:2003 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| 16/30338566 DC : 2016-06 | BS EN 13379 - PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| ONORM EN ISO 6507-3 : 2006 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| NF ISO 7206-2 : 2011 AMD 1 2016 | IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METALLIC, CERAMIC AND PLASTICS MATERIALS |
| PREN 50526-1 : DRAFT 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| NF ISO 7207-2 : 2011 AMD 1 2016 | IMPLANTS FOR SURGERY - COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METAL, CERAMIC AND PLASTICS MATERIALS |
| ISO 12636:2018 | Graphic technology — Blankets for offset printing |
| I.S. EN 12697-31:2007 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| EN 12042 : 2014 COR 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| 14/30310358 DC : 0 | BS EN 12697-31 - BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| UNI ISO 3384-1 : 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| UNE-EN 16282-3:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements |
| AAMI ISO 5362 : 2006 | ANAESTHETIC RESERVOIR BAGS |
| I.S. EN 60099-4:2014 | SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS |
| I.S. EN 16282-3:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| ASTM F 3018 : 2017 | Standard Guide for Assessment of Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices |
| UNI ISO 7743 : 2012 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
| BIS IS/ISO 6194-1 : 2007 | ROTARY SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 1: NOMINAL DIMENSIONS AND TOLERANCES |
| ISO 3384-2:2012 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 2: Testing with temperature cycling |
| ISO 5597:2010 | Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| PREN 13001-3-4 : DRAFT 2016 | CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures |
| DIN EN 71-1:2015-02 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| ISO 6621-2:2003 | Internal combustion engines Piston rings Part 2: Inspection measuring principles |
| ISO 9084:2000 | Calculation of load capacity of spur and helical gears Application to high speed gears and gears of similar requirements |
| ISO 20808:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method |
| ISO 10303-214:2010 | Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
| ISO/IEC 7811-6:2014 | Identification cards Recording technique Part 6: Magnetic stripe High coercivity |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| ISO 18669-2:2004 | Internal combustion engines Piston pins Part 2: Inspection measuring principles |
| ISO 5781:2016 | Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces |
| IEC 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
| ISO 15113:2005 | Rubber — Determination of frictional properties |
| DIN EN ISO 7539-1:2013-04 | CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 1: GENERAL GUIDANCE ON TESTING PROCEDURES (ISO 7539-1:2012) |
| DIN EN 13208:2011-02 | Food processing machinery - Vegetable peelers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12853:2012-02 | Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN ISO 22088-4:2006-11 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006) |
| DIN EN 12355:2011-02 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12854:2010-12 | Food processing machinery - Beam mixers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12721:2014-02 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT |
| DIN EN 13083:2013-08 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| DIN EN 623-4:2005-01 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004 |
| DIN EN 13954:2010-12 | Food processing machinery - Bread slicers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN ISO 4288:1998-04 | GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| DIN EN ISO 13287:2013-02 | PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012) |
| DIN EN 13870:2015-12 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| DIN EN ISO 13565-1:1998-04 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997 |
| DIN EN 454:2015-02 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| DIN EN 13885:2011-02 | Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12043:2015-02 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 1337-2:2004-07 | Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004 |
| UNE-EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
| BS EN 13312-1:2001 | Biotechnology. Performance criteria for piping and instrumentation General performance criteria |
| ISO 1133-1:2011 | Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
| BS EN 10329 : 2005 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| BS EN 12722 : 2009 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT |
| DIN EN 10305-2:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN 10305-5:2010 | Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| UNE-EN 12331:2016 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| BS EN 12355 : 2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 16119-3:2013 | Agricultural and forestry machinery — Environmental requirements for sprayers — Part 3: Sprayers for bush and tree crops |
| UNE-EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| UNE-EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| UNE-EN ISO 17296-4:2017 | Additive manufacturing - General principles - Part 4: Overview of data processing (ISO 17296-4:2014) |
| ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| UNE-EN 12561-6:2012 | Railway applications - Tank wagons - Part 6: Manholes |
| IEC 62217:2012 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| DIN EN 1337-4:2004-08 | Structural bearings - Part 4: Roller bearings |
| BS EN ISO 8785:1999 | Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters |
| DIN EN 10305-5:2016-08 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| ISO 7963:2006 | Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
| I.S. EN 1820:2005 | ANAESTHETIC RESERVOIR BAGS |
| EN ISO 16859-3:2015 | Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015) |
| EN ISO 25178-6:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010) |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| EN 13886:2005+A1:2010 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements |
| EN ISO 293:2005 | Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004) |
| EN 50262 : 1998 AMD 2 2004 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| UNI EN 14655 : 2010 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13288 : 2010 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 21182 : 2013 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION |
| UNI EN ISO 5981 : 2008 | RUBBER OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING |
| UNI EN 12722 : 2013 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO DRY HEAT |
| UNI EN 12854 : 2010 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13621 : 2010 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13886 : 2010 | FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH POWERED STIRRER AND/OR MIXER - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 8503-1 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES |
| UNI EN ISO 2431 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS |
| UNI EN 13954 : 2010 | FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13208 : 2010 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1337-2 : 2004 | STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
| UNI EN 13231-3 : 2012 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| UNI EN 12852 : 2010 | FOOD PROCESSING MACHINERY - FOOD PROCESSORS AND BLENDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13871 : 2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13083 : 2013 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| UNI EN ISO 7539-1 : 2013 | CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 1: GENERAL GUIDANCE ON TESTING PROCEDURES |
| UNI EN 13389 : 2010 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12952-3 : 2012 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER |
| UNI EN 12851 : 2010 | FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 8503-4 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE |
| UNI EN ISO 20482 : 2014 | METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST |
| UNI EN 12043 : 2015 | FOOD PROCESSING MACHINERY - INTERMEDIATE PROVERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 14159 : 2008 | SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY |
| UNI EN 12984 : 2010 | FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 10049 : 2014 | MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| UNI EN 13951 : 2012 | LIQUID PUMPS - SAFETY REQUIREMENTS - AGRIFOODSTUFFS EQUIPMENT - DESIGN RULES TO ENSURE HYGIENE IN USE |
| UNI EN 1678 : 2010 | FOOD PROCESSING MACHINERY - VEGETABLE CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13885 : 2010 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13534 : 2010 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| EN ISO 25178-605:2014 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) |
| UNI EN 454 : 2015 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12041 : 2015 | FOOD PROCESSING MACHINERY - MOULDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 21534 : 2009 | NON-ACTIVE SURGICAL IMPLANTS - JOINT REPLACEMENT IMPLANTS - PARTICULAR REQUIREMENTS |
| UNI EN ISO 21179 : 2013 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT |
| UNI EN 13081 : 2012 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| ONORM EN ISO 12179 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
| UNI EN 1820 : 2009 | ANAESTHETIC RESERVOIR BAGS |
| UNI EN 1916 : 2004 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| UNI EN 12561-6 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| UNI EN 12853 : 2010 | FOOD PROCESSING MACHINERY - HAND-HELD BLENDERS AND WHISKS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12721 : 2013 | FURNITURE - ASSESSMENT OF SURFACE RESISTANCE TO WET HEAT |
| UNI EN 12355 : 2010 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13570 : 2010 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13591 : 2010 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN ISO 12780-2:2012 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| UNE-EN 13231-4:2014 | Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings |
| ISO 6263:2013 | Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces |
| 13/30288815 DC : 0 | BS EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| DIN EN 16701:2015-04 | ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY |
| DIN EN ISO 16119-3:2013-09 | AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 3: SPRAYERS FOR BUSH AND TREE CROPS (ISO 16119-3:2013) |
| DIN EN ISO 25178-601:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| ISO 9982:1998 | Belt drives Pulleys and V-ribbed belts for industrial applications PH, PJ, PK, PL and PM profiles: dimensions |
| UNI ISO 3384 : 2009 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| BS ISO 4211-3:2013 | Furniture. Tests for surface finishes Assessment of resistance to dry heat |
| I.S. CEN ISO TS 12780-2:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| BS EN 61386-25:2011 | Conduit systems for cable management Particular requirements. Conduit fixing devices |
| ISO 3290-2:2014 | Rolling bearings Balls Part 2: Ceramic balls |
| BS EN ISO 12181-2:2011 | Geometrical product specifications (GPS). Roundness Specification operators |
| I.S. EN ISO 25178-605:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014) |
| I.S. EN 16282-8:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING |
| PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN ISO 14644-9:2012-12 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| 14/30261577 DC : 0 | BS EN ISO 9013 - THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| BS ISO 9085:2002 | Calculation of load capacity of spur and helical gears. Application for industrial gears |
| 11/30205376 DC : 0 | BS EN ISO 25178-605 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS |
| UNI EN ISO 1133-1 : 2012 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
| ISO 22215:2006 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for tensile creep of monolithic ceramics |
| ISO 11952:2014 | Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems |
| BS ISO 15324 : 2000 | CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST |
| 02/207432 DC : DRAFT JUN 2002 | IEC 62217. ED.1.0 - CREATION OF A COMMON CLAUSE STANDARD FOR COMPOSITE INSULATORS |
| BS ISO 5597:2010 | Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| PREN 14420-2 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL |
| BS ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Calculation of surface durability (pitting) |
| 12/30156938 DC : 0 | BS EN 16452 - RAILWAY APPLICATIONS - BRAKING - BRAKE BLOCKS |
| BS 3M 60:1998 | Separable tube fittings for fluid systems, 24° cone. General specification |
| ISO 4211-2:2013 | Furniture — Tests for surface finishes — Part 2: Assessment of resistance to wet heat |
| ISO/IEC 8484:2014 | Information technology — Magnetic stripes on savingsbooks |
| ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures |
| I.S. EN 623-4:2004 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - PART 4: DETERMINATION OF SURFACE ROUGHNESS |
| DIN EN ISO 12780-2:2011-07 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| BS ISO 16589-2:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Vocabulary |
| BS ISO 13473-3:2002 | Characterization of pavement texture by use of surface profiles Specification and classification of profilometers |
| BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| BS EN 61914:2016 | Cable cleats for electrical installations |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| BS ISO/IEC 7811-8:2014 | Identification cards. Recording technique Magnetic stripe. Coercivity of 51,7 kA/m (650 Oe) |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| 02/120925 DC : DRAFT MAR 2002 | ISO/DIS 11443 - PLASTICS - DETERMINATION OF THE FLUIDITY OF PLASTICS USING CAPILLARY AND SLIT-DIE RHEOMETERS |
| 14/30266796 DC : 0 | BS EN ISO 1514 - PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| 16/30322243 DC : 0 | BS EN 14535-1 - RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS |
| 13/30283636 DC : 0 | BS ISO 13179-1 - IMPLANTS FOR SURGERY - PLASMA-SPRAYED UNALLOYED TITANIUM COATINGS ON SURGICAL IMPLANTS - PART 1: GENERAL REQUIREMENTS |
| 04/30125833 DC : DRAFT NOV 2004 | ISO 22215 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR TENSILE CREEP OF MONOLITHIC CERAMICS |
| 09/30183435 DC : 0 | BS EN ISO 1133-1 - PLASTICS DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
| 13/30281710 DC : 0 | BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| BS EN 16282-3:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements |
| BS ISO 10766:2014 | Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| 15/30325003 DC : 0 | BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES |
| BS EN ISO 15324:2008 | Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test |
| BS ISO/TR 10064-4:1998 | Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking |
| UNE-EN 10310:2011 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| BS ISO 18669-2:2004 | Internal combustion engines. Pistons pins Inspection measuring principles |
| 07/30154358 DC : DRAFT AUG 2007 | DD ISO/TS 25178-6 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: ARIAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
| DIN EN ISO 25178-6:2010-06 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010) |
| 11/30241728 DC : DRAFT MAR 2011 | BS EN ISO 13287 - PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE |
| BS ISO 8364:2017 | Alpine skis and bindings. Binding mounting area. Requirements and test methods |
| I.S. EN ISO 16119-3:2013 | AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 3: SPRAYERS FOR BUSH AND TREE CROPS (ISO 16119-3:2013) |
| BS EN ISO 14638:2015 | Geometrical product specifications (GPS). Matrix model |
| BS EN 50368:2003 | Cable cleats for electrical installations |
| BS ISO 3601-2:2016 | Fluid power systems. O-rings Housing dimensions for general applications |
| PREN 13870 : DRAFT 2013 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 16610-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| 15/30288130 DC : 0 | BS EN ISO 11114-4 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT |
| BS ISO 13565-1 : 1996 AMD 9949 | GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - FILTERING AND GENERAL MEASUREMENT CONDITIONS |
| 12/30252148 DC : 0 | BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS |
| BS EN ISO 1133-1:2011 | Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
| 08/30184303 DC : DRAFT SEP 2008 | BS EN 12952-3 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS |
| 03/314804 DC : DRAFT SEP 2003 | BS ISO 6336-3 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 3: CALCULATION OF TOOTH BENDING STRENGTH |
| BS ISO 12176-1:2017 | Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Butt fusion |
| 14/30272886 DC : 0 | BS ISO 17841 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR THERMAL FATIGUE OF FINE CERAMICS SUBSTRATE |
| 17/30337243 DC : DRAFT SEP 2017 | BS ISO 21113 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMIC THIN PLATES AT ROOM TEMPERATURE |
| 13/30263156 DC : 0 | BS EN ISO 16859-3 - METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE TEST BLOCKS |
| 11/30217705 DC : 0 | BS ISO 14627 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE RESISTANCE OF SILICON NITRIDE MATERIALS FOR ROLLING BEARING BALLS AT ROOM TEMPERATURE BY INDENTATION FRACTURE METHOD |
| DIN EN 16281:2013-04 | CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS ISO 11894-1:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics Oxide-ion-conducting solid electrolytes |
| ISO/IEC 22050:2002 | Information technology Data interchange on 12,7 mm, 384-track magnetic tape cartridges Ultrium-1 format |
| DD ISO/TS 17450-2:2002 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications,operators and uncertainties |
| BS EN 62276:2016 | Single crystal wafers for surface acoustic wave (SAW) device applications. Specifications and measuring methods |
| BS EN ISO 16859-3:2015 | Metallic materials. Leeb hardness test Calibration of reference test blocks |
| BS ISO 20808:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method |
| BS ISO 17440:2014 | Cranes. General design. Limit states and proof of competence of forged steel hooks |
| BS EN ISO 16119-4:2014 | Agricultural and forestry machinery. Environmental requirements for sprayers Fixed and semi-mobile sprayers |
| 15/30324991 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| 12/30260299 DC : 0 | BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 12/30235298 DC : DRAFT JAN 2012 | BS EN 50526-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| BS EN 16282-2:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements |
| 09/30198161 DC : 0 | BS EN ISO 12780-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| 09/30201494 DC : 0 | BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES |
| PD ISO/TR 6336-30:2017 | Calculation of load capacity of spur and helical gears Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5 |
| BIS IS/ISO 6621-2 : 2003(R2014) | INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 2: INSPECTION MEASURING PRINCIPLES |
| ISO/TS 16610-1:2006 | Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts |
| BS EN 50262:1999 | Cable glands for electrical installations |
| I.S. EN ISO 14638:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| ISO 12891-2:2014 | Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
| 02/122388 DC : DRAFT JUN 2002 | ISO/DIS 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
| BS ISO 6195:2013 | Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances |
| 04/30109196 DC : DRAFT FEB 2004 | EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
| BS ISO/IEC 8484:2014 | Information technology. Magnetic stripes on savingsbooks |
| 08/30185056 DC : DRAFT SEP 2008 | BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 21534:2009 | Non-active surgical implants. Joint replacement implants. Particular requirements |
| 04/30114371 DC : DRAFT JUN 2004 | EN 10339 - STEEL TUBES FOR ONSHORE AND OFFSHORE WATER PIPELINES - INTERNAL LIQUID APPLIED EPOXY LININGS FOR CORROSION PROTECTION |
| CSA ISO/IEC 8484 : 2015 | INFORMATION TECHNOLOGY - MAGNETIC STRIPES ON SAVINGSBOOKS |
| BS EN 71-1 : 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| DIN ISO 7743:2016-08 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011) |
| BS A 328-2:1999 | Accessory drives and mounting flanges (Metric sizes) Dimensions |
| ISO 5362:2006 | Anaesthetic reservoir bags |
| AWS C4.6M:2006(R2012) | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| ISO 10817-1:1998 | Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration |
| UNE-EN ISO 16119-4:2015 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014) |
| BS ISO 17841:2015 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate |
| DIN ISO 815-1:2016-09 | Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures (ISO 815-1:2014) |
| BS ISO 7206-2 : 2011 | IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 2: ARTICULATING SURFACE MADE OF METALLIC, CERAMIC AND PLASTICS MATERIALS |
| SAE AS27195A | SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362 |
| BS EN ISO 13287:2012 | Personal protective equipment. Footwear. Test method for slip resistance |
| ISO 5599-2:2001 | Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector |
| UNI EN ISO 27509 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
| UNE-EN ISO 25178-601:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| I.S. EN 16701:2014 | ENERGETIC MATERIALS FOR DEFENCE - SAFETY, VULNERABILITY - FRIABILITY |
| I.S. EN 60099-8:2011 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| I.S. EN 62217:2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV)) |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| I.S. EN ISO 21534:2009 | NON-ACTIVE SURGICAL IMPLANTS - JOINT REPLACEMENT IMPLANTS - PARTICULAR REQUIREMENTS |
| ISO 17841:2015 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal fatigue of fine ceramics substrate |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| ISO 4211-3:2013 | Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat |
| UNI EN ISO 14644-9 : 2012 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION |
| I.S. EN 16282-4:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS |
| I.S. EN ISO 25178-604:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
| I.S. EN 50526-1:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| ISO 22214:2006 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of monolithic ceramics at room temperature |
| ISO 13473-3:2002 | Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| ISO 7368:2016 | Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities |
| DIN EN ISO 15630-3:2011-02 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| I.S. EN ISO 25178-603:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
| PREN 454 : DRAFT 2011 | FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 12042 : DRAFT 2011 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN ISO 16119-3:2013 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013) |
| BIS IS 6885-3 : 2011 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| EN 16452:2015 | Railway applications - Braking - Brake blocks |
| ISO 16589-2:2001 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Part 2: Vocabulary |
| ISO 17092:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of corrosion resistance of monolithic ceramics in acid and alkaline solutions |
| I.S. EN ISO 25178-601:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| ISO 14654:1999 | Epoxy-coated steel for the reinforcement of concrete |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| EN ISO 14607:2018 | Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018, Corrected version 2018-08) |
| ISO/TS 10993-19:2006 | Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials |
| ISO 11894-1:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes |
| ISO 21809-4:2009 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE) |
| ISO 14610:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of porous ceramics at room temperature |
| EN ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2010) |
| I.S. EN ISO 12780-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| I.S. EN ISO 7963:2010 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR CALIBRATION BLOCK NO. 2 |
| UNE-EN ISO 16859-1:2016 | Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015) |
| I.S. EN ISO 25178-701:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| I.S. EN ISO 6507-3:2018 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6507-3:2018) |
| I.S. EN 71-1:2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| I.S. EN 62276:2016 | SINGLE CRYSTAL WAFERS FOR SURFACE ACOUSTIC WAVE (SAW) DEVICE APPLICATIONS - SPECIFICATIONS AND MEASURING METHODS |
| ISO 16873:2011 | Hydraulic fluid power — Pressure switches — Mounting surfaces |
| I.S. EN 15166:2008 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 62155:2003 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| ISO 8364:2017 | Alpine skis and bindings — Binding mounting area — Requirements and test methods |
| ISO 3290-1:2014 | Rolling bearings Balls Part 1: Steel balls |
| UNE-EN ISO 2431:2012 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| DIN EN ISO 2431:2012-03 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
| DIN EN 1092-3:2004-10 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004 |
| DIN EN 10049:2014-03 | Measurement of roughness average Ra and peak count RPc on metallic flat products |
| DIN EN 13886:2011-02 | Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 14653-1:2005-07 | MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS |
| ISO/TS 12181-2:2003 | Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators |
| BS EN ISO 9013:2017 | Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances |
| BS EN 1092-4:2002 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Aluminium alloy flanges |
| BS EN ISO 14159:2008 | Safety of machinery. Hygiene requirements for the design of machinery |
| BS EN 13885 : 2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN ISO 2431:2011 | Paints and varnishes. Determination of flow time by use of flow cups |
| UNE-EN 14655:2006 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| BS EN 13555:2014 | Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| UNE-EN 13081:2009 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler |
| ISO 16610-1:2015 | Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| ISO 25178-603:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
| BS EN 453:2014 | Food processing machinery. Dough mixers. Safety and hygiene requirements |
| BS EN ISO 22088-4:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC) Ball or pin impression method |
| BS EN 1759-3:2003 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges |
| BS EN 13311-1:2001 | Biotechnology. Performance criteria for vessels General performance criteria |
| BS EN 13389 : 2005 | FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 7539-1:2012 | Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures |
| BS EN 1724:1999 | Light conveyor belts. Test method for the determination of the coefficient of friction |
| BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
| BS EN 1071-2:2002 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by the crater grinding method |
| BS EN ISO 13565-2:1998 | Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the linear material ration curve |
| BS EN 13621 : 2004 | FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13871:2014 | Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements |
| DIN EN ISO 21182:2013-09 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION (ISO 21182:2013) |
| ISO 21534:2007 | Non-active surgical implants Joint replacement implants Particular requirements |
| BS EN 1820:2005 | Anaesthetic reservoir bags |
| ISO 25178-605:2014 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments |
| ISO 14635-2:2004 | Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| ISO 14635-3:2005 | Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| ISO 9085:2002 | Calculation of load capacity of spur and helical gears — Application for industrial gears |
| BS EN 12462:1998 | Biotechnology. Performance criteria for pumps |
| UNE-EN 13231-3:2013 | Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track |
| UNE-EN ISO 14577-3:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
| BS EN ISO 11114-4:2005 | Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents Test methods for selecting metallic materials resistant to hydrogen embrittlement |
| UNE-EN 12722:2009 | Furniture - Assessment of surface resistance to dry heat |
| BS EN 10305-6:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes for hydraulic and pneumatic power systems |
| BS EN 13287:2004 | Safety, protective and occupational footwear for professional use. Test method for slip resistance |
| UNE-EN 13083:2009 | Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading |
| ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
| BS EN 13208 : 2003 | FOOD PROCESSING MACHINERY - VEGETABLE PEELERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 13288:2006 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
| BS EN 13081 : 2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER |
| BS EN 1674:2015 | Food processing machinery. Dough sheeters. Safety and hygiene requirements |
| BS EN ISO 295:2004 | Plastics. Compression moulding of test specimens of thermosetting materials |
| UNE-EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| BS EN 10339:2007 | Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection |
| UNE-EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| UNE-EN 13951:2012 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| BS EN 13083 : 2008 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING |
| ISO 14644-9:2012 | Cleanrooms and associated controlled environments Part 9: Classification of surface cleanliness by particle concentration |
| BS EN 12390-4:2000 | Testing hardened concrete Compressive strength. Specification for testing machines |
| ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
| BS EN 1337-6:2004 | Structural bearings Rocker bearings |
| BS EN 12761-2:2001 | Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection Field crop sprayers |
| UNE-EN ISO 1514:2017 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| BS EN ISO 1133:2005 | Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| UNE-EN ISO 6506-3:2015 | Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
| BS EN 13288 : 2005 | FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN ISO 14577-1:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015) |
| ISO 14577-4:2016 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings |
| UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| ISO 13565-3:1998 | Geometrical Product Specifications (GPS) Surface texture: Profile method; Surfaces having stratified functional properties Part 3: Height characterization using the material probability curve |
| BS EN 12041:2014 | Food processing machinery. Moulders. Safety and hygiene requirements |
| UNE-EN 454:2015 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| ISO 16119-4:2014 | Agricultural and forestry machinery — Environmental requirements for sprayers — Part 4: Fixed and semi-mobile sprayers |
| ISO 3384:2005 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| IEC 60099-4:2014 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
| ISO 13287:2012 | Personal protective equipment Footwear Test method for slip resistance |
| BS EN 12761-3:2001 | Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection Air-assisted sprayers for bush and tree crops |
| ISO 25178-604:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| ISO 5981:2007 | Rubber- or plastics-coated fabrics Determination of resistance to combined shear flexing and rubbing |
| ISO 17296-4:2014 | Additive manufacturing General principles Part 4: Overview of data processing |
| DIN EN ISO 21179:2013-09 | LIGHT CONVEYOR BELTS - DETERMINATION OF THE ELECTROSTATIC FIELD GENERATED BY A RUNNING LIGHT CONVEYOR BELT (ISO 21179:2013) |
| BS EN ISO 13565-1:1998 | Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions |
| BS EN ISO 5981:2007 | Rubber or plastics-coated fabrics. Determination of resistance to combined shear flexing and rubbing |
| ISO/TS 12780-2:2003 | Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators |
| ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
| ISO 8785:1998 | Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters |
| ISO 20482:2013 | Metallic materials — Sheet and strip — Erichsen cupping test |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| BS EN 10305-3:2016 | Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes |
| BS EN 12331:2015 | Food processing machinery. Mincing machines. Safety and hygiene requirements |
| ISO 6508-3:2015 | Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks |
| BS EN ISO 293 : 2005 | PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
| BS EN 13951:2012 | Liquid pumps. Safety requirements. Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
| ISO 14577-1:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| ISO 14577-3:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks |
| ISO 9013:2017 | Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances |
| ISO 5436-1:2000 | Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures |
| ISO 25178-6:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 6: Classification of methods for measuring surface texture |
| UNE-EN 12721:2009 | Furniture - Assessment of surface resistance to wet heat |
| BS EN 10305-1:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes |
| UNE-EN 13591:2006 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
| BS EN 1759-1:2004 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24 |
| BS EN ISO 14577-3:2015 | Metallic materials. Instrumented indentation test for hardness and materials parameters Calibration of reference blocks |
| BS EN 13870:2015 | Food processing machinery. Portion cutting machines. Safety and hygiene requirements |
| BS EN 12560-5:2001 | Flanges and their joints. Gaskets for Class-designated flanges Metallic ring joint gaskets for use with steel flanges |
| UNE-EN ISO 20482:2014 | Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013) |
| UNE-EN 13389:2006 | Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements. |
| UNE-EN 13871:2015 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| ISO 21179:2013 | Light conveyor belts — Determination of the electrostatic field generated by a running light conveyor belt |
| BS EN 12020-1:2008 | Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 Technical conditions for inspection and delivery |
| UNE-EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| BS EN ISO 7539-1:2012 | Corrosion of metals and alloys. Stress corrosion testing General guidance on testing procedures |
| ISO 25178-602:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments |
| UNE-EN ISO 14577-4:2017 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016) |
| IEC 61386-25:2011 | Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices |
| BS EN 13591 : 2005 | FOOD PROCESSING MACHINERY - FIXED DECK OVEN LOADERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-ISO 7743:2016 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
| ISO 16859-3:2015 | Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks |
| ISO 14159:2002 | Safety of machinery — Hygiene requirements for the design of machinery |
| BS EN ISO 14577-1:2015 | Metallic materials. Instrumented indentation test for hardness and materials parameters Test method |
| BS EN 1092-3:2003 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges |
| ISO 25178-606:2015 | Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments |
| UNE-EN 13870:2016 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| UNE-EN 12952-3:2012 | Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
| ISO 12179:2000 | Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
| BS EN 12854 : 2003 | FOOD PROCESSING MACHINERY - BEAM MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 6506-3:2014 | Metallic materials Brinell hardness test Part 3: Calibration of reference blocks |
| ISO 16859-1:2015 | Metallic materials — Leeb hardness test — Part 1: Test method |
| BS EN 1672-2 : 2005 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| ISO 22088-4:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method |
| DIN EN ISO 14577-4:2017-04 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
| EN 62276:2016 | Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods |
| UNI EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| EN ISO 16610-1:2015 | Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) |
| EN ISO 16946:2017 | Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017) |
| EN 12721:2009+A1:2013 | Furniture - Assessment of surface resistance to wet heat |
| EN ISO 25178-606:2015 | Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) |
| EN 13885:2005+A1:2010 | Food processing machinery - Clipping machines - Safety and hygiene requirements |
| EN 1724 : 1998 COR 1999 | LIGHT CONVEYOR BELTS - TEST METHOD FOR THE DETERMINATION OF THE COEFFICIENT OF FRICTION |
| I.S. EN ISO 12179:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
| EN ISO 1133:2005 | Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) |
| I.S. EN ISO 13565-2:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO |
| ENV 13287:2002/AC:2003 | SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE - TEST METHOD FOR THE DETERMINATION OF SLIP RESISTANCE |
| EN ISO 5981:2007 | Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007) |
| EN 623-4:2004 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness |
| EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| EN 13951:2012 | Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
| EN 16701:2014 | Energetic materials for defence - Safety, vulnerability - Friability |
| EN 12984:2005+A1:2010 | Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements |
| EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
| EN 12020-1:2008 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
| EN 1820:2005+A1:2009 | Anaesthetic reservoir bags (ISO 5362:2000, modified) |
| EN ISO 16119-4:2014 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014) |
| EN ISO 22088-4:2006 | Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006) |
| EN ISO 14880-4:2006 | Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) |
| EN 13591:2005+A1:2009 | Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
| EN 453:2014 | Food processing machinery - Dough mixers - Safety and hygiene requirements |
| EN ISO 25178-602:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| EN ISO 25178-701:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| EN 454:2014 | Food processing machinery - Planetary mixers - Safety and hygiene requirements |
| EN ISO 7963:2010 | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
| EN ISO 1133-1:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| EN ISO 21182:2013 | Light conveyor belts - Determination of the coefficient of friction (ISO 21182:2013) |
| EN ISO 3274:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments (ISO 3274:1996) |
| EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
| EN 13621:2004+A1:2010 | Food processing machinery - Salad dryers - Safety and hygiene requirements |
| EN 13954:2005+A1:2010 | Food processing machinery - Bread slicers - Safety and hygiene requirements |
| EN 15166:2008 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| EN ISO 5436-1:2000 | Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000) |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN ISO 11114-4:2017 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) |
| EN 1092-4:2002 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
| EN 14653-1:2005 | Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications |
| EN ISO 21179:2013 | Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt (ISO 21179:2013) |
| EN ISO 8785:1999 | Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998) |
| EN 13981-1:2003 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products |
| EN ISO 1514:2016 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| EN ISO 25178-70:2014 | Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) |
| EN ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012) |
| EN ISO 15732:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) |
| EN 13871:2014 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| EN 15165:2014 | Food processing machinery - Forming machines - Safety and hygiene requirements |
| EN ISO 14577-4:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016) |
| EN 15183:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
| EN ISO 14577-3:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
| EN ISO 14644-9:2012 | Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012) |
| EN ISO 14577-1:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015) |
| EN 16281:2013 | Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods |
| EN ISO 25178-601:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| EN ISO 20482:2013 | Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013) |
| EN ISO 16859-1:2015 | Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015) |
| EN 1674:2015 | Food processing machinery - Dough sheeters - Safety and hygiene requirements |
| EN ISO 14159:2008 | Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002) |
| EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| EN ISO 17450-2:2012 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| EN 1759-4:2003 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
| EN ISO 25178-603:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) |
| EN ISO 13565-1:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
| EN ISO 295:2004 | Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004) |
| EN ISO 25178-604:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) |
| EN 14655:2005+A1:2010 | Food processing machinery - Baguette slicers - Safety and hygiene requirements |
| I.S. EN ISO 4288:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| EN 13390:2002+A1:2009 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements |
| I.S. EN ISO 13565-3:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE -PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE |
| EN ISO 15324:2008 | Corrosion of metals and alloys - Evaluation of stress corrosion cracking by the drop evaporation test (ISO 15324:2000) |
| EN ISO 7539-1:2012 | Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012) |
| EN 1678:1998+A1:2010 | Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements |
| EN 12851:2005+A1:2010 | Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements |
| EN 16282-8:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing |
| UNE-EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| ISO 18535:2016 | Diamond-like carbon films Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method |
| ISO 28703:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal-shock resistance of porous ceramics |
| 12/30265041 DC : 0 | BS EN ISO 16946 - NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR STEP WEDGE CALIBRATION BLOCK |
| BS ISO 14654:1999 | Epoxy-coated steel for the reinforcement of concrete |
| DIN EN ISO 25178-604:2013-12 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
| UNI EN ISO 16119-2 : 2013 | AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 2: HORIZONTAL BOOM SPRAYERS |
| 04/30126837 DC : DRAFT DEC 2004 | BS ISO 6336-1 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 1: BASIC PRINCIPLES, INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| BS ISO 23519:2010 | Sintered metal materials, excluding hardmetals. Measurement of surface roughness |
| BS ISO 21809-4:2009 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE) |
| 11/30212259 DC : 0 | BS ISO 14610 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF POROUS CERAMICS AT ROOM TEMPERATURE |
| BS ISO 19606:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for surface roughness of fine ceramic films by atomic force microscopy |
| INCITS/ISO/IEC 8484 : 2008 | INFORMATION TECHNOLOGY - MAGNETIC STRIPES ON SAVINGSBOOKS |
| DIN ISO 23519:2015-12 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS (ISO 23519:2010) |
| ECMA 319 : 1ED 2001 | DATA INTERCHANGE ON 12,7 MM - 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT |
| 10/30234867 DC : 0 | BS ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION |
| DIN EN ISO 25178-602:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| 12/30258949 DC : 0 | BS ISO 16610-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS |
| 18/30346200 DC : DRAFT APR 2018 | BS ISO 21618 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE RESISTANCE OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY INDENTATION FRACTURE (IF) METHOD |
| ISO 17744:2004 | Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method |
| UNE-EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| CSA ISO/IEC 7811-2 : 2002 : R2015 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE - LOW COERCIVITY |
| DIN EN ISO 12181-2:2011-07 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| BS ISO 10817-1:1999 | Rotating shaft vibration measuring systems Relative and absolute sensing of radial vibration |
| DIN EN ISO 14638:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| 11/30243837 DC : 0 | BS EN 62217 - POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| PREN 13289 : DRAFT 2015 | PASTA PROCESSING PLANT - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 17170:2015 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for spherical indentation of porous ceramics |
| I.S. EN 12042:2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| 04/30112988 DC : DRAFT APR 2004 | ISO 14635-3 - GEARS - FZG TEST PROCEDURES - FZG TEST METHOD A/2.8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES |
| 10/30215350 DC : 0 | BS ISO 16873 - HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES |
| 09/30201486 DC : 0 | BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| 05/30142211 DC : DRAFT NOV 2005 | ISO/IEC 15457-2 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUE |
| DIN EN ISO 4545-3:2015-05 (Draft) | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 02/704943 DC : DRAFT APR 2002 | PREN 10329 - STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| ASTM F 2664 : 2011 : REDLINE | Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods |
| BS EN ISO 16610-1:2015 | Geometrical product specifications (GPS). Filtration Overview and basic concepts |
| 13/30252091 DC : 0 | BS ISO 17170 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR SPHERE INDENTATION OF POROUS CERAMICS |
| 07/30162947 DC : 0 | BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
| 11/30210938 DC : 0 | BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES |
| BS ISO 16873:2011 | Hydraulic fluid power. Pressure switches. Mounting surfaces |
| 03/105598 DC : DRAFT MAY 2003 | BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
| 08/30171709 DC : DRAFT JAN 2008 | BS EN ISO 25178-701 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| DIN EN ISO 16859-1:2016-02 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD (ISO 16859-1:2015) |
| 12/30246399 DC : 0 | BS ISO 11749 - BELT DRIVE - V-RIBBED BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST |
| ISO 6507-3:2018 | Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks |
| DIN ISO 3384-1:2015-12 | Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) |
| 14/30299146 DC : 0 | BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 71-8:2018 | Safety of toys Activity toys for domestic use |
| IEC 62444:2010 | Cable glands for electrical installations |
| 13/30286138 DC : 0 | BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS ISO 9981:1998 | Belt drives. Pulleys and V-ribbed belts for the automotive industry. PK profile:dimensions |
| 10/30202064 DC : 0 | BS ISO 7206-2 - IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METALLIC, CERAMIC AND PLASTICS MATERIALS |
| 11/30247562 DC : 0 | BS EN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 16610-1:2015-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| UNE-EN 16281:2013 | Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods |
| DIN 3863:2003-08 | COMPRESSION COUPLINGS - SPHERICAL LINERS - DESIGN AND TYPES OF PORT END U AND Y |
| ISO 7207-2:2011 | Implants for surgery — Components for partial and total knee joint prostheses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials |
| UNE-EN 71-1:2015 | Safety of toys - Part 1: Mechanical and physical properties |
| ISO 19631:2015 | Aerospace series Tube fittings for fluid systems, 5 080 psi (35 000 kPa) Qualification specification |
| BS ISO 14610:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature |
| BIS IS 1501-3 : 2013 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| BS ISO 6194-1:2007 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Nominal dimensions and tolerances |
| BS ISO 5599-1:2001 | Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector |
| BS EN ISO 25178-6:2010 | Geometrical product specifications (GPS). Surface texture. Areal Classification of methods for measuring surface texture |
| 15/30324988 DC : 0 | BS EN 10305-6 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 6: WELDED COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 06/30094541 DC : DRAFT JUN 2006 | ISO 21534 - NON-ACTIVE SURGICAL IMPLANTS - JOINT REPLACEMENT IMPLANTS - PARTICULAR REQUIREMENTS |
| UNE-EN ISO 1133-1:2012 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| 13/30274174 DC : 0 | BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES |
| BS EN 13001-3-5:2016 | Cranes. General design Limit states and proof of competence of forged hooks |
| BS EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V |
| 15/30328599 DC : 0 | BS ISO 1099 - METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD |
| 13/30272530 DC : 0 | BS ISO/IEC 7811-8 - IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 8: MAGNETIC STRIPE - COERCIVITY OF 51,7 KA/M (650 OE) |
| BS ISO 4288 : 96 AMD 9918 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD: RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| 07/30131694 DC : 0 | BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES |
| BS EN ISO 25178-601:2010 | Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments |
| ISO 18487-1:2017 | Aerospace series — Titanium tube for 35 MPa operating pressure — Part 1: Inch series |
| BS ISO 3384:2005 | Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures |
| BS ISO 4401:2005 | Hydraulic fluid power. Four-port directional control valves. Mounting surfaces |
| UNE-EN 16452:2016 | Railway applications - Braking - Brake blocks |
| 08/30176943 DC : 0 | BS ISO 23519 - SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS |
| 07/30139822 DC : 0 | |
| 08/30174605 DC : DRAFT SEP 2008 | BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| CSA C62155 : 2006 : R2011 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| 99/714207 DC : DRAFT SEP 1999 | ISO/DIS 13091-1 - MECHANICAL VIBRATION - VIBROTACTILE PERCEPTION THRESHOLD FOR THE ASSESSMENT OF NERVE DYSFUNCTION - PART 1: TEST METHODS FOR MEASUREMENT AT THE FINGERTIPS |
| PREN 4833 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| NF EN 60099-8 : 2011 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| 05/30130517 DC : DRAFT MAR 2005 | ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION-JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION |
| CEI EN 61386-25 : 2012 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 25: PARTICULAR REQUIREMENTS - CONDUIT FIXING DEVICES |
| I.S. EN 61914:2016 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| BIS IS 1586-3 : 2012 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (SCALES, A, B, C, D, E, F, G, H, K, N, T) |
| I.S. EN 13001-3-3:2014 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| ISO 7743:2017 | Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
| CSA ISO/IEC 7811-2 : 2002 : R2011 | IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE - LOW COERCIVITY |
| API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| ASTM F 3129 : 2016 | Standard Guide for Characterization of Material Loss from Conical Taper Junctions in Total Joint Prostheses |
| PREN 4836 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH |
| DIN EN 13231-4:2013-06 | Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings |
| CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 | CONDUIT, TUBING, AND CABLE FITTINGS |
| CAN/CSA-ISO/IEC 22050-04 (R2012) | Information Technology - Data Interchange on 12,7 mm, 384-Track Magnetic Tape Cartridges - Ultrium-1 Format (Adopted ISO/IEC 22050:2002, first edition, 2002-10-01) |
| ONORM EN ISO 4545-3 : 2006 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| ISO 11443:2014 | Plastics Determination of the fluidity of plastics using capillary and slit-die rheometers |
| ISO 19487:2016 | Metallic and other inorganic coatings — Electrodeposited nickel-ceramics composite coatings |
| ISO 17327-1:2018 | Non-active surgical implants — Implant coating — Part 1: General requirements |
| I.S. EN ISO 1133-1:2011 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011) |
| ISO/IEC 7811-2:2014 | Identification cards Recording technique Part 2: Magnetic stripe Low coercivity |
| ISO/TS 16610-32:2009 | Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters |
| DIN EN ISO 14607:2009-08 | NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS |
| I.S. EN ISO 25178-606:2015 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015) |
| ISO 4586-2:2015 | High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties |
| BIS IS 1500-3 : 2013 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| ISO 15630-3:2010 | Steel for the reinforcement and prestressing of concrete Test methods Part 3: Prestressing steel |
| ISO 19606:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic films by atomic force microscopy |
| ISO 13179-1:2014 | Implants for surgery Plasma-sprayed unalloyed titanium coatings on metallic surgical implants Part 1: General requirements |
| I.S. EN 50526-2:2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| CEI EN 50526-2 : 2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| UNE-EN ISO 16859-3:2016 | Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015) |
| I.S. EN 71-8:2018 | SAFETY OF TOYS - PART 8: ACTIVITY TOYS FOR DOMESTIC USE |
| UNE-ISO 815-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures |
| PREN 453 : DRAFT 2011 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 60099-4:2014 | Surge arresters Metal-oxide surge arresters without gaps for a.c. systems |
| ISO/IEC 15457-2:2007 | Identification cards — Thin flexible cards — Part 2: Magnetic recording technique |
| ISO 28704:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of porous ceramics at room temperature |
| I.S. EN ISO 16119-2:2013 | AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 2: HORIZONTAL BOOM SPRAYERS (ISO 16119-2:2013, CORRECTED VERSION 2017-03) |
| EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
| NACE TM21423 : 2017 | TEST METHOD FOR DETERMINATION OF SUBSTRATE AND SURFACE TEMPERATURE LIMITS FOR INSULATIVE COATINGS USED FOR PERSONNEL PROTECTION |
| ISO 12176-1:2017 | Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion |
| UNE-EN ISO 25178-701:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| UNI EN 13231-4 : 2013 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS |
| UNI EN 15166 : 2009 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN ISO 25178-603 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS |
| NF EN ISO 25178-6 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
| BS EN ISO 16119-2:2013 | Agricultural and forestry machinery. Environmental requirements for sprayers Horizontal boom sprayers |
| UNI EN ISO 15324 : 2008 | CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST |
| CEI EN 60099-8 : 2012 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| SAE AS 5857 : 2010 | GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS, STATIC APPLICATIONS |
| NF EN ISO 25178-601 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| I.S. EN 61386-25:2011 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 25: PARTICULAR REQUIREMENTS - CONDUIT FIXING DEVICES (IEC 61386-25:2011) |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| ISO 16119-2:2013 | Agricultural and forestry machinery — Environmental requirements for sprayers — Part 2: Horizontal boom sprayers |
| ISO 10110-8:2010 | Optics and photonics Preparation of drawings for optical elements and systems Part 8: Surface texture; roughness and waviness |
| DIN EN 12952-3:2012-03 | Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
| ISO 3601-2:2016 | Fluid power systems — O-rings — Part 2: Housing dimensions for general applications |
| ISO 6194-2:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 2: Vocabulary |
| EN ISO 4545-3:2018 | Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017) |
| KTA 3201.3 : 2007(R2012) | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
| EN 12697-31:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
| IEC 62848-1:2016 | Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps |
| ISO 6194-1:2007 | Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 1: Nominal dimensions and tolerances |
| I.S. EN ISO 4545-3:2018 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 4545-3:2017) |
| ISO/IEC 7811-8:2014 | Identification cards Recording technique Part 8: Magnetic stripe Coercivity of 51,7 kA/m (650 Oe) |
| ISO 14999-4:2015 | Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 |
| ISO/TR 10064-4:1998 | Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| I.S. EN ISO 25178-602:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| I.S. EN ISO 25178-6:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
| UNE-EN 12463:2006 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| UNI EN ISO 13287 : 2012 | PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE |
| DIN EN 13555:2014-07 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| DIN EN 13390:2011-02 | Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| DIN EN 13621:2011-02 | Food processing machinery - Salad dryers - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13570:2011-02 | Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12020-1:2008-06 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
| DIN EN ISO 11114-4:2015-08 (Draft) | TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017) |
| DIN EN ISO 8503-4:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| DIN EN 13534:2011-02 | Food processing machinery - Curing injection machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12561-6:2011-10 | Railway applications - Tank wagons - Part 6: Manholes |
| DIN EN 1759-3:2004-10 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004 |
| DIN EN ISO 8503-1:2013-05 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES (ISO 8503-1:2012) |
| DIN EN 453:2015-04 | FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13871:2015-01 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN ISO 3274:1998-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| BS EN 13981-1:2003 | Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Extruded products |
| ISO 25178-601:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments |
| UNE-EN 1674:2015 | Food processing machinery - Dough sheeters - Safety and hygiene requirements |
| ISO 12181-2:2011 | Geometrical product specifications (GPS) Roundness Part 2: Specification operators |
| BS EN 12690:1999 | Biotechnology. Performance criteria for shaft seals |
| BS EN 1759-4:2003 | Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Aluminium alloy flanges |
| BS EN ISO 15732:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
| BS EN 1916:2002 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
| BS EN 1071-1:2003 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by contact probe filometer |
| BS EN ISO 21182:2013 | Light conveyor belts. Determination of the coefficient of friction |
| BS EN ISO 4545-3:2005 | Metallic materials. Knoop hardness test Calibration of reference blocks |
| ISO 25178-701:2010 | Geometrical product specifications (GPS) Surface texture: Areal Part 701: Calibration and measurement standards for contact (stylus) instruments |
| IEC 61264:1998 | Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear |
| ISO 15324:2000 | Corrosion of metals and alloys Evaluation of stress corrosion cracking by the drop evaporation test |
| BS EN ISO 6507-3:2005 | Metallic materials. Vickers hardness test Calibration of reference blocks |
| BS EN 14653-1:2005 | Manually operated hydraulic shoring systems for groundwork support Product specifications |
| BS EN ISO 21179:2013 | Light conveyor belts. Determination of the electrostatic field generated by a running light conveyor belt |
| BS EN ISO 6508-3:2015 | Metallic materials. Rockwell hardness test Calibration of reference blocks |
| BS EN ISO 14577-4:2016 | Metallic materials. Instrumented indentation test for hardness and materials parameters Test method for metallic and non-metallic coatings |
| BS EN 12561-6:2011 | Railway applications. Tank wagons Manholes |
| BS EN 13231-3:2012 | Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in track |
| BS EN ISO 6506-3:2014 | Metallic materials. Brinell hardness test Calibration of reference blocks |
| ISO 27509:2012 | Petroleum and natural gas industries Compact flanged connections with IX seal ring |
| BS EN 1337-4:2004 | Structural bearings Roller bearings |
| BS EN ISO 12179:2001 | Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments |
| ISO 15732:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
| BS EN 10305-4:2016 | Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| ISO 12780-2:2011 | Geometrical product specifications (GPS) Straightness Part 2: Specification operators |
| BS EN 14655 : 2005 | FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS |
| 01/715268 DC : DRAFT NOV 2001 | BS ISO 13628-7 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| BS EN ISO 13565-3:2000 | Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the material probability curve |
| BS EN 13390 : 2002 | FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12851 : 2005 | FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12952-3:2011 | Water-tube boilers and auxiliary installations Design and calculation for pressure parts of the boiler |
| ONORM EN ISO 13287 : 2013 | PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE (ISO 13287:2012) |
| BS EN ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 14880-4:2006 | Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties |
| ISO 16946:2017 | Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block |
| EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| EN 12761-2:2001 | Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Environmental protection - Part 2: Field crop sprayers |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| EN 13288:2005+A1:2009 | Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
| EN 13287:2004 | Personal protective equipment - Footwear - Test method for slip resistance |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| CEN/TS 13001-3-5:2010 | Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
| EN 61914:2016 | Cable cleats for electrical installations |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| EN 12284:2003 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| UNI EN 13555 : 2014 | FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| EN ISO 13565-3:2000 | Geometrical Product Specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998) |
| DIN EN 13231-3:2012-04 | Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track |
| EN 10049:2013 | Measurement of roughness average Ra and peak count RPc on metallic flat products |
| EN 10329:2006 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| EN ISO 21534:2009 | Non-active surgical implants - Joint replacement implants - Particular requirements (ISO 21534:2007) |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| DIN ISO 3384:2008-07 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| EN 12560-5:2001 | Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges |
| EN ISO 16119-3:2013 | Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013) |
| EN 1071-3:2005 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test |
| DIN EN ISO 14923:2003-10 | THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS |
| EN ISO 12181-2:2011 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| DIN EN 10305-4:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| EN 13570:2005+A1:2010 | Food processing machinery - Mixing machines - Safety and hygiene requirements |
| EN ISO 1302:2002 | Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| EN 61264:1998/corrigendum:2000 | CERAMIC PRESSURIZED HOLLOW INSULATORS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| DIN EN 10329:2006-04 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| DIN EN ISO 5981:2008-01 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING |
| DIN EN ISO 16119-2:2013-09 | AGRICULTURAL AND FORESTRY MACHINERY - ENVIRONMENTAL REQUIREMENTS FOR SPRAYERS - PART 2: HORIZONTAL BOOM SPRAYERS (ISO 16119-2:2013) |
| DIN EN 10339:2007-05 | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| EN 13389:2005+A1:2009 | Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements |
| EN ISO 13565-2:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996) |
| EN 61386-25:2011 | Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices |
| IEC 60099-8:2017 RLV | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| DIN EN ISO 14880-4:2006-08 | Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) |
| EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| DIN EN 15183:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
| DIN EN 10288:2003-12 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL TWO-LAYER EXTRUDED POLYETHYLENE BASED COATINGS |
| UNE-EN 13390:2002 | Food processing machinery- Pie and tart machines - Safety and hygiene requirements. |
| I.S. EN ISO 14880-4:2006 | OPTICS AND PHOTONICS - MICROLENS ARRAYS - PART 4: TEST METHODS FOR GEOMETRICAL PROPERTIES |
| CSA ISO/IEC 15457-2 : 2008 : R2013 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUE |
| UNE-EN 1673:2001 | Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements. |
| CAN/CSA-ISO/IEC 15457-2-08 (R2018) | Identification cards - Thin flexible cards - Part 2: Magnetic recording technique (Adopted ISO/IEC 15457-2:2007, second edition, 2007-06-15) |
| NS-EN ISO 6508-3:2023 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023) |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| AS/NZS ISO 8124.1:2019 | Safety of toys Safety aspects related to mechanical and physical properties |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.