ISO 3951:1989
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Sampling procedures and charts for inspection by variables for percent nonconforming
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
09-12-2018
Superseded by
ISO 3951-1:2005
ISO 3951-2:2006
ISO 3951-2:2013
ISO 3951-1:2013
Language(s)
English, French
Published date
09-14-1989
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Is complementary to ISO 2859. Object of the methods laid down is to ensure that lots of an acceptable quality have a high probability of acceptance and that the probability of rejection of inferior lots is as high as possible. To be used under the following conditions: inspection procedure to be applied to a continuous series of lots of discrete products supplied by one producer using one production process; only a single quality characteristic is considered which must be measurable on a continuous scale; production is stable and quality characteristic is distributed normally; a contract or standard defines an upper and/or a lower specification limit.
| DevelopmentNote |
Also numbered as BS 6002-1(1993). (06/2004)
|
| DocumentType |
Standard
|
| Pages |
107
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE 66030:1984 | Identical |
| PN ISO 3951 : 1997 | Identical |
| DIN ISO 3951:1992-08 | Identical |
| NBN ISO 3951 : 1993 | Identical |
| AS 2490-1997 | Identical |
| PNE 66030 | Identical |
| ISO 8255-2:2013 | Microscopes — Cover glasses — Part 2: Quality of materials, standards of finish and mode of packaging |
| 05/30137420 DC : DRAFT AUG 2005 | IEC 60086-1 - PRIMARY BATTERIES - PART 1: GENERAL |
| XP CEN ISO/TS 15876-7 : 2004 XP | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS ISO 2113:1996 | Reinforcement fibres. Woven fabrics. Basis for a specification |
| 99/123581 DC : DRAFT OCT 1999 | ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS |
| 10/30233182 DC : 0 | BS EN 492 - FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| ASTM F 2407 : 2006 : R2013 : EDT 1 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| 10/30233189 DC : 0 | BS EN 494 - FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| VDE 0212-2 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| BS ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| ASTM C 1448/C1448M : 2005 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| DD ENV 1006:2003 | Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties |
| 05/30127247 DC : DRAFT JAN 2005 | ISO 16149 - AGRICULTURAL IRRIGATION EQUIPMENT - PVC ABOVE-GROUND LOW PRESSURE SURFACE IRRIGATION PIPE - SPECIFICATIONS AND TEST METHODS |
| CEI EN 61897 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| CEI EN 60300-3-2 : 2006 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| CSA C1325 : 1999 : R2016 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| CAN/CSA-ISO/IEC 15426-1-07 (R2017) | Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Verifier Conformance Specification - Part 1: Linear Symbols (Adopted ISO/IEC 15426-1:2006, second edition, 2006-06-01) |
| XP CEN ISO/TS 15874-7 : 2004 XP | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ASTM C 1449/C1449M : 2005 : REV A | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| I.S. EN 60704-3:2006 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES |
| ASTM C 1447/C1447M : 2004 : EDT 1 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM C 1447/C1447M : 2004 : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ISO 2067:1998 | Granulated cork Sampling |
| I.S. EN 61325:1997 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| I.S. EN 2240-001:2009 | AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION |
| UNE-ISO 2859-1:2012 | Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| IEC 60810:2017 | Lamps, light sources and LED packages for road vehicles - Performance requirements |
| ASTM C 1185 : 2008 : R2012 | Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards |
| ASTM C 1450/C1450M : 2004 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM C 1185 : 2008 : R2016 | Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards |
| EN ISO/TS 15874-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 14020-3:2002 | Reinforcements. Specification for textile glass rovings Specific requirements |
| BS EN 326-3:2003 | Wood-based panels. Sampling, cutting and inspection Inspection of an isolated lot of panels |
| BS EN ISO/IEC 15415 : 2005 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| BS EN ISO/IEC 15416:2002 | Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Linear symbols |
| BS EN 681-2:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers |
| BS EN 681-1:1996 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
| EN 61897:1998 | Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers |
| VDE 0212-3 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| DIN EN ISO 186:2002-08 | Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002 |
| ANSI X9.100-20 : 2015 | PRINT AND TEST SPECIFICATIONS FOR MAGNETIC INK PRINTING (MICR) - PART 1: PRINT SPECIFICATIONS - PART 2: CONFORMANCE TESTING - PART 3: SECONDARY REFERENCE DOCUMENTS |
| EN 60810 : 2018 | LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| DIN EN ISO 6497:2005-06 | Animal feeding stuffs - Sampling (ISO 6497:2002); German version EN ISO 6497:2005 |
| EN 60300-3-2:2005 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| EN 61284:1997 | Overhead lines - Requirements and tests for fittings |
| EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
| ENV 1452-7:2000 | Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity |
| I.S. EN IEC 60810:2018 | LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| I.S. EN ISO/TS 15876-7:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 61854:1998 | Overhead lines. Requirements and tests for spacers |
| BS ISO 16149:2006 | Agricultural irrigation equipment. PVC above-ground low-pressure pipe for surface irrigation. Specifications and test methods |
| BS 6428:1983 | Method for sampling empty sacks for testing |
| 05/30134607 DC : DRAFT JUNE 2005 | ISO 22110 - MILK AND MILK PRODUCTS - SAMPLING - INSPECTION BY VARIABLES IN THE PRESENCE OF MEASUREMENT ERROR |
| NF EN 2240-001 : 2010 | AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION |
| 16/30337687 DC : 0 | BS ISO 9788 - AIR CARGO - DOUBLE STUD TIE-DOWN FITTINGS - DESIGN AND TESTING REQUIREMENTS |
| 08/30183116 DC : DRAFT AUG 2008 | BS EN 459-1 - BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
| DIN 1057-2:1985-07 | BUILDING MATERIALS FOR FREE-STANDING CHIMNEYS - LINING BLOCKS - REQUIREMENTS, TESTING, INSPECTION |
| 03/102154 DC : DRAFT MAY 2003 | CEN TS 14632 - PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 10/30209149 DC : 0 | BS EN ISO/IEC 15415 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| ASTM C 1185 : 2008 | Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards |
| DD ENV 459-1:1995 | Building lime Definitions, specifications and conformity criteria |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| I.S. EN 60432-1:2004 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999 (MOD)) |
| CSA ISO/IEC 15426-1 : 2007 : R2012 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATIONS - PART 1: LINEAR SYMBOLS |
| DD CEN/TS 12201-7:2003 | Plastics piping systems for water supply. Polyethylene (PE) Guidance for the assessment of conformity |
| NF EN 61854 : 2001 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| PREN 492 : DRAFT 2010 | FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNI ISO 11462-1 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC |
| CEI EN 61284 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| CEI EN 61325 : 1998 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| CEI EN 61854 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| I.S. EN 61897:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| CEN/TS 1456-2:2003 | Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| I.S. EN 60300-3-2:2005 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| BS EN 60432-1 : 2000 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
| EI 1584 : 2017 | FOUR-INCH HYDRANT SYSTEM COMPONENTS AND ARRANGEMENTS |
| ISO 9788:2017 | Air cargo — Double stud tie-down fittings — Design and testing requirements |
| DD CEN/TS 1456-2:2003 | Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| ASTM F 2407 : 2006 | Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities |
| ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity |
| ISO 7749-1:1995 | Agricultural irrigation equipment Rotating sprinklers Part 1: Design and operational requirements |
| ISO 10290:1993 | Textiles Cotton yarns Specifications |
| DIN EN 1916:2003-04 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 12654-2:1998-12 | Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998 |
| DIN EN 1917:2003-04 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 326-3:2004-02 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 61854:1998 | Overhead lines - Requirements and tests for spacers |
| BS EN 13084-5:2005 | Free-standing chimneys Material for brick liners. Product specifications |
| IEC 61897:1998 | Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers |
| BS EN 588-1:1997 | Fibre-cement pipes for sewers and drains Pipes, joints and fittings for gravity systems |
| DIN EN 681-1:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber |
| DIN EN ISO-IEC 15416 E : 2002 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS |
| DIN EN 61897 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| I.S. EN 326-3:2003 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 3: INSPECTION OF AN ISOLATED LOT OF PANELS |
| DIN EN 681-4:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements |
| DIN EN 681-3:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber |
| I.S. EN ISO/IEC 15415:2005 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| DIN EN 206-1:2001-07 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| DIN EN 681-2:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers |
| BS 6000:1996 | Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots |
| DIN EN 61284 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| VDE 0212-1 : 1998 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| BS 6315:1993 | Methods for sampling and further preparative procedures for raw, natural and synthetic rubber |
| DIN V ENV 1452-7:2001-03 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Elements of SPC |
| 16/30334770 DC : 0 | BS EN 60704-3 ED 3.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES |
| 03/312758 DC : DRAFT AUG 2003 | ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE |
| I.S. EN 206-1:2002 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 61854 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| BS ISO 8007-3:2004 | Carbonaceous materials used in the production of aluminium. Sampling plans and sampling from individual units Sidewall blocks |
| I.S. ENV 1452-7:2000 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| NF EN 163 : 1991 | CERAMIC TILES - SAMPLING AND BASIS FOR ACCEPTANCE |
| 05/30132248 DC : DRAFT APR 2005 | EN 14547 - SAMPLING SCHEMES FOR THIRD PARTY CONFORMITY ASSESSMENT OF FINENESS IN PRECIOUS METAL ARTICLES |
| ISO 22702:2003 | Utility lighters General consumer-safety requirements |
| 06/30156380 DC : DRAFT SEP 2006 | BS ISO 1795 - RUBBER, RAW NATURAL AND RAW SYNTHETIC - SAMPLING AND FURTHER PREPARATIVE PROCEDURES |
| PREN 12467 : DRAFT 2010 | FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| GOST ISO/IEC 15426-1 : 2003 | AUTOMATIC IDENTIFICATION - BAR CODING - LINEAR BAR CODE SYMBOLS VERIFIER - CONFORMITY REQUIREMENTS |
| DD ENV 1452-7:2001 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| 04/30112025 DC : DRAFT APR 2004 | ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
| BS EN 60383-1:1998 | Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria |
| 02/121978 DC : DRAFT APR 2002 | ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS |
| BS ISO/IEC 15426-1:2006 | Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification Linear symbols |
| PREN 2240-001 : 200P2 | AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION |
| PREN 2962 : 200P1 | AEROSPACE SERIES - CARBON FIBRE FILAMENT YARN (POLYACRYLONITRILE PRECURSOR) - TECHNICAL SPECIFICATION |
| EN ISO/TS 15876-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ASTM C 1450/C1450M : 2004 : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| DD ENV 1401-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity |
| I.S. EN 60810:2015 | LAMPS FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| NF ENV 459-1 : 95 FD | BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
| I.S. EN 27574-4:1991 | ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 4: METHODS FOR STATED VALUES FOR BATCHES OF MACHINES |
| I.S. EN 61854:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| I.S. EN 27574-1:1991 | ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - GENERAL CONSIDERATIONS AND DEFINITIONS |
| BS EN IEC 60810:2018 | Lamps, light sources and led packages for road vehicles. Performance requirements |
| BS ISO 10290:1993 | Textiles. Cotton yarns. Specifications |
| I.S. CEN TS 13244-7:2003 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| NF EN 61284 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS |
| ASTM C 1449/C1449M : 2005 : REV A : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity |
| ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity |
| CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003) |
| I.S. EN 1917:2002 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| DIN EN 13084-5:2005-12 | Free-standing chimneys - Part 5: Material for brick liners - Product specifications |
| NF EN 60086-1 : 2011 | PRIMARY BATTERIES - PART 1: GENERAL |
| DIN EN 681-1:2016-07 (Draft) | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016 |
| DIN EN 512:1994-11 | FIBRE-CEMENT PRODUCTS - PRESSURE PIPES AND JOINTS |
| DIN EN ISO 5555:2014-10 | ANIMAL AND VEGETABLE FATS AND OILS - SAMPLING (ISO 5555:2001 + AMD 1:2014) |
| DIN EN 682:2006-10 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| BS EN 681-4:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements |
| ISO 7574-1:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions |
| ONORM B 4710-2 : 2008 | CONCRETE - PART 2: LIGHTWEIGHT CONCRETE WITH CLOSED STRUCTURES AND A MINIMUM DRY DENSITY OF 800 KG/M[3] - SPECIFICATION, PRODUCTION, USE AND PROOF OF CONFORMITY - RULES FOR THE IMPLEMENTATION OF ONORM EN 206-1 FOR LIGHTWEIGHT CONCRETE |
| I.S. EN ISO/IEC 15416:2002 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS |
| UNI EN 13084-5 : 2005 | FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS |
| UNI EN 1917 : 2004 | CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| BS 4778-2:1991 | Quality vocabulary Quality concepts and related definitions |
| EN 14020-3:2002 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
| UNI EN 1916 : 2004 | CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
| UNI EN ISO 5555 : 2014 | ANIMAL AND VEGETABLE FATS AND OILS - SAMPLING - AMENDMENT 1: FLEXITANKS |
| ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC |
| 03/102273 DC : DRAFT MAR 2003 | BS ISO 13448-0 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION OF PRIORITIES PRINCIPLES (APP) - PART 1: GUIDELINES FOR THE APP APPROACH |
| 15/30303461 DC : 0 | BS EN 16907-5 - EARTHWORKS - PART 5: QUALITY CONTROL |
| PREN 295-2 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| 10/30233185 DC : 0 | BS EN 12467 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| BS 6002:1979 | Specification for sampling procedures and charts for inspection by variables for percent defective |
| BS 6068-4.10(1999) : 1999 | WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA IN SURFACE AND WASTE WATER - PART 3: MINIATURIZED METHOD (MOST PROBABLE NUMBER) FOR THE DETECTION AND ENUMERATION OF E. COLI IN SURFACE AND WASTE WATER |
| 10/30216987 DC : 0 | BS EN 295-2 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
| 12/30257889 DC : 0 | BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| 94/110814 DC : DRAFT JAN 1995 | ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS |
| BS ISO 9788:2017 | Air cargo. Double stud tie-down fittings. Design and testing requirements |
| 07/30150572 DC : 0 | ISO 25337 - PLASTICS - PRODUCTION QUALITY CONTROL - STATISTICAL METHOD FOR APPLYING SINGLE MEASUREMENTS |
| BS 6002-4.1:1994 | Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation |
| BS EN 2240-001:2009 | Aerospace series. Lamps, incandescent Technical specification |
| DD CEN ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance for the assessment of conformity |
| BS 7459-1:1991 | Rotating sprinklers for irrigation equipment Specification for design and operational requirements |
| BS EN 60300-3-2:2005 | Dependability management Application guide. Collection of dependability data from the field |
| XP PREN 2240-001 : 1997 XP | AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| NF ISO/IEC 15426-1 : 2004 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATIONS - PART 1: LINEAR SYMBOLS |
| ISO 16149:2006 | Agricultural irrigation equipment PVC above-ground low-pressure pipe for surface irrigation Specifications and test methods |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| 98/108338 DC : DRAFT OCT 1998 | PREN 13084-5 - FREE-STANDING INDUSTRIAL CHIMNEYS - PART 5: MATERIALS FOR BRICK LINERS - PRODUCT SPECIFICATIONS |
| PREN 3675 : 200P1 | AEROSPACE SERIES - SAMPLING PLAN FOR ACCEPTANCE TESTING OF ARAMID, CARBON FIBRE AND TEXTILE GLASS FILAMENT YARNS |
| I.S. EN 74:1989 | COUPLERS, LOOSE SPIGOTS AND BASE-PLATES FOR USE IN WORKING SCAFFOLDS AND FALSEWORK MADE OF STEEL TUBES - REQUIREMENTS AND TEST PROCEDURES |
| EN IEC 60810:2018 | Lamps, light sources and led packages for road vehicles - Performance requirements |
| I.S. ENV 1006:2003 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
| BS ISO 6497:2002 | Animal feeding stuffs. Sampling |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| ASTM C 1448/C1448M : 2005 : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| XP CEN/TS 13244-7 : 2004 XP | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO 23711:2003 | Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers |
| I.S. CEN TS 12201-7:2003 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO/IEC 15426-1:2006 | Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 1: Linear symbols |
| I.S. EN ISO/TS 15875-7:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| IEC 61854:1998 | Overhead lines - Requirements and tests for spacers |
| 16/30350012 DC : 0 | BS EN 60810 - LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| BS EN ISO 1886:1995 | Reinforcement fibres. Sampling plans applicable to received batches |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| IEC 60704-3:2006 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values |
| IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| BS EN 12654-2:1999 | Textile glass. Yarns Methods of test and general specifications |
| BS EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| BS EN 681-3:2000 | Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber |
| ISO 7574-4:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines |
| BS EN 1635:1998 | Bar coding. Test specifications. Bar code symbols |
| ISO 6497:2002 | Animal feeding stuffs Sampling |
| BS EN 512:1995 | Fibre-cement products. Pressure pipes and joints |
| BS EN ISO 7899-1:1999 | Water quality. Detection and enumeration of intestinal enterococci in surface and waste water Miniaturized method (Most probable number) for surface and waste water |
| BS EN 14020-2:2002 | Reinforcements. Specification for textile glass rovings Methods of test and general requirements |
| BS EN ISO 6497:2005 | Animal feeding stuffs. Sampling |
| BS EN ISO 186:2002 | Paper and board. Sampling to determine average quality |
| BS EN 60810:2015 | Lamps for road vehicles. Performance requirements |
| ISO 5555:2001 | Animal and vegetable fats and oils — Sampling |
| BS EN ISO 9308-3:1999 | Water quality. Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water Miniaturized method (most probable number) for the detection and enumeration of <i>E. coli</i> in surface and waste water |
| BS EN 682:2002 | Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids |
| BS EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects |
| BS EN 1917:2002 | Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced |
| EN 74 : 1988 | COUPLERS, LOOSE SPIGOTS & BASE PLATES FOR USE IN WORKING SCAFFOLDS & FALSEWORK MADE OF STEEL TUBES - REQUIREMENTS & TEST PROCEDURES |
| EN 2240-001:2009 | Aerospace series - Lamps, incandescent - Part 001: Technical specification |
| EN 27574-4:1988 | Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines (ISO 7574-4:1985) |
| EN 1635 : 1997 | BAR CODING - TEST SPECIFICATIONS - BAR CODE SYMBOLS |
| EN ISO 186:2002 | Paper and board - Sampling to determine average quality (ISO 186:2002) |
| EN 27574-1:1988 | Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions (ISO 7574-1:1985) |
| EN 14020-2:2002 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
| EN 588-1:1996 | Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN ISO/TS 15877-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN 27023:1992 | Packaging - Sacks - Method of sampling empty sacks for testing (ISO 7023:1983) |
| EN ISO/IEC 15416:2001 | Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols (ISO/IEC 15416:2000) |
| EN ISO 6497:2005 | Animal feeding stuffs - Sampling (ISO 6497:2002) |
| EN 13975:2003 | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
| ISO 8007-3:2003 | Carbonaceous materials used in the production of aluminium Sampling plans and sampling from individual units Part 3: Sidewall blocks |
| 02/121776 DC : DRAFT APR 2002 | PREN 14403 - SAMPLING OF THE PRECIOUS METAL ALLOYS IN JEWELLERY AND ASSOCIATED PRODUCTS |
| BS ISO 8255-2:2013 | Microscopes. Cover glasses Quality of materials, standards of finish and mode of packaging |
| NF EN 61897 : 2001 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS |
| BS EN 61897:1999 | Overhead lines. Requirements and tests for Stockbridge type aeolian vibration dampers |
| BS EN 61284:1998 | Overhead lines. Requirements and tests for fittings |
| 09/30210295 DC : DRAFT SEP 2009 | BS EN 60086-3 - PRIMARY BATTERIES - PART 3: WATCH BATTERIES |
| CEI UNI EN ISO 15415 : 2012 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| BS ISO 10725:2000 | Acceptance sampling plans and procedures for the inspection of bulk materials |
| DD CEN/TS 13244-7:2003 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| I.S. EN ISO/TS 15874-7:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS ISO 22702 : 2003 | UTILITY LIGHTERS - GENERAL CONSUMER-SAFETY REQUIREMENTS |
| ASTM C 1447/C1447M : 2004 : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| NF EN 60432-1 : 2001 AMD 2 2013 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
| NF ISO 2067 : 2002 | GRANULATED CORK - SAMPLING |
| NF EN ISO/TS 15877-7 : 2004 XP | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 07/30169285 DC : 0 | BS ISO 8336 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| DEFSTAN 00-42(PT1)/2(2008) : 2008 | RELIABILITY AND MAINTAINABILITY (R&M) ASSURANCE ACTIVITY - PART 1: ONE-SHOT DEVICES/SYSTEMS |
| 03/108624 DC : DRAFT JULY 2003 | IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| 98/402025 DC : DRAFT JAN 1998 | BS ISO 13448-1 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION-OF-PRIORITIES PRINCIPLE (APP) - PART 1: GUIDE TO THE APP APPROACH |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| 00/564528 DC : DRAFT SEP 2000 | BS EN 13975 - SAMPLING PROCEDURES USED FOR ACCEPTANCE TESTING OF INVITRO DIAGNOSTIC MEDICAL DEVICES - STATISTICAL ASPECTS |
| 03/109038 DC : DRAFT MAY 2003 | ISO 9163 - TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| AHRI 545 : 2017 | PERFORMANCE RATING OF MODULATING POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| ASTM C 1448/C1448M : 2005 : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| CSA ISO/IEC 15426-1 : 2007 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATIONS - PART 1: LINEAR SYMBOLS |
| 07/30152250 DC : 0 | BS ISO 11596 - SAMPLING OF THE PRECIOUS METAL ALLOYS FOR AND IN JEWELLERY AND ASSOCIATED PRODUCTS |
| PREN 494 : DRAFT 2010 | FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| CSA C1325 : 1999 : R2011 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| XP CEN ISO/TS 15875-7 : 2004 XP | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSS LINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. CEN TS 1456-2:2003 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ISO 2113:1996 | Reinforcement fibres — Woven fabrics — Basis for a specification |
| ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach |
| ASTM C 1449/C1449M : 2005 : REV A : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| CEI EN 60704-3 : 2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES |
| ASTM C 1450/C1450M : 2004 : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| BS EN 60704-3:2006 | Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Procedure for determining and verifying declared noise emission values |
| I.S. EN ISO/TS 15877-7:2004 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN 1916:2002 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
| ISO 1886:1990 | Reinforcement fibres Sampling plans applicable to received batches |
| BS EN ISO 5555 : 2002 | ANIMAL AND VEGETABLE FATS AND OILS - SAMPLING |
| ISO 7023:1983 | Packaging Sacks Method of sampling empty sacks for testing |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| EN 60432-1:2000/A2:2012 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011) |
| CEN/TS 13244-7 : 2003 | PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN 61325:1995 | Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria |
| EN 12654-2:1998 | Textile glass - Yarns - Part 2: Methods of test and general specifications |
| EN 60704-3:2006 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values |
| BS 627(1991) : 1991 AMD 8670 | METHODS FOR SAMPLING OF ANIMAL AND VEGETABLE FATS AND OILS |
| AHRI 540 : 2004 | PERFORMANCE RATING OF POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS AND COMPRESSOR UNITS |
| ISO 3534:1977 | Statistics — Vocabulary and symbols |
| ISO 2854:1976 | Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
| ISO 2859:1974 | Sampling procedures and tables for inspection by attributes |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ISO 5479:1997 | Statistical interpretation of data — Tests for departure from the normal distribution |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.