ISO 3274:1996
Current
Current
The latest, up-to-date edition.
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
12-05-1996
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Describes profiles and the general structure of contact (stylus) instruments for measuring surface roughness and waviness. Specifies the properties of the instrument which influence profile evaluation. Replaces the first edition of ISO 3274:1975 and ISO 1880:1979.
| Committee |
ISO/TC 213
|
| DevelopmentNote |
Supersedes ISO 1880 (04/2001)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS B 0651:2001 | Identical |
| NF EN ISO 3274 : 1998 | Identical |
| NF ISO 3274 : 1997 | Identical |
| NBN EN ISO 3274 : 1998 | Identical |
| NEN EN ISO 3274 : 1997 | Identical |
| NEN ISO 3274 : 1997 | Identical |
| NS EN ISO 3274 : 1ED 1998 | Identical |
| I.S. EN ISO 3274:1998 | Identical |
| PN ISO 3274 : 1997 | Identical |
| PN EN ISO 3274 : 2011 | Identical |
| SN EN ISO 3274 : 1998 | Identical |
| UNI EN ISO 3274 : 1998 | Identical |
| UNE-EN ISO 3274:1998 | Identical |
| BIS IS 15261 : 2002 | Identical |
| BS EN ISO 3274:1998 | Identical |
| EN ISO 3274:1997 | Identical |
| BS ISO 3274 : 1996 AMD 9919 | Identical |
| PNE-prEN ISO 3274 | Identical |
| UNE 82314:1991 | Identical |
| DIN EN ISO 3274:1998-04 | Identical |
| I.S. EN ISO 25178-3:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS (ISO 25178-3:2012) |
| DIN EN ISO 16610-41:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015) |
| BS 6741-2:1987 | Glossary of surface roughness terms Measurement of surface roughness parameters |
| I.S. EN ISO 16610-28:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 28: PROFILE FILTERS: END EFFECTS |
| ISO/TS 17450-2:2002 | Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
| 11/30216118 DC : 0 | BS EN ISO 1797-3 - DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS |
| BS ISO 12301:2007 | Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics |
| 17/30309711 DC : 0 | BS EN ISO 13473-1 - CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH |
| 02/712417 DC : DRAFT OCT 2002 | PREN 10049 - MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| 11/30199166 DC : 0 | BS ISO 11952 - SURFACE CHEMICAL ANALYSIS - SCANNING PROBE MICROSCOPY - DETERMINATION OF GEOMETRIC QUANTITIES USING SPM - CALIBRATION OF MEASURING SYSTEMS |
| DIN EN ISO 1797:2016-05 (Draft) | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| BS EN ISO 25178-701:2010 | Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments |
| 13/30286407 DC : 0 | BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| BS EN ISO 25178-604:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| DD ISO/TS 16610-32:2009 | Geometrical product specifications (GPS). Filtration Robust profile filters. Spline filters |
| BS EN ISO 12780-2:2011 | Geometrical product specifications (GPS). Straightness Specification operators |
| BS 6836(1987) : AMD 7527 | SPECIFICATION FOR CENTRIFUGAL PUMPS: CLASS II |
| 11/30243507 DC : 0 | BS EN ISO 25178-70 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| I.S. EN ISO 16610-49:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015) |
| 05/30109548 DC : DRAFT JAN 2005 | ISO 14880-4 - MICROLENS ARRAYS - PART 4: TEST METHODS FOR NON-OPTICAL PROPERTIES |
| 06/30145675 DC : DRAFT SEP 2006 | ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS |
| BS ISO 19674:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of internal stress in ceramic coatings by application of the Stoney formula |
| PREN ISO 12780-2 : DRAFT 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| DIN EN ISO 16610-49:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015) |
| UNI EN ISO 12780-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| 09/30209365 DC : DRAFT NOV 2009 | BS EN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| DD CEN ISO/TS 12780-2:2007 | Geometrical product specifications (GPS). Straightness Specification operators |
| BS EN ISO 25178-3:2012 | Geometrical product specifications (GPS). Surface texture: Areal Specification operators |
| DIN EN ISO 17450-2:2013-04 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| BS EN 50526-1:2012 | Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters |
| 06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| BS ISO 12085 : 96 AMD 9951 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS |
| DD ISO/TS 16610-41:2006 | Geometrical product specifications (GPS). Filtration Morphological profile filters. Disk and horizontal line-segment filters |
| BS EN 62047-26:2016 | Semiconductor devices. Micro-electromechanical devices Description and measurement methods for micro trench and needle structures |
| 15/30324532 DC : 0 | BS ISO 20808 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF MONOLITHIC CERAMICS BY BALL-ON-DISC METHOD |
| I.S. EN ISO 25178-70:2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| DIN EN ISO 25178-701:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| I.S. EN ISO 18452:2016 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THICKNESS OF CERAMIC FILMS BY CONTACT-PROBE PROFILOMETER (ISO 18452:2005) |
| DD ISO/TS 16610-49:2006 | Geometrical product specifications (GPS). Filtration Morphological profile filters. Scale space techniques |
| DD ISO/TS 10993-19:2006 | Biological evaluation of medical devices Physico-chemical, morphological and topographical characterization of materials |
| ANSI INCITS 322 : 2015 | INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS |
| UNE-EN ISO 17450-2:2015 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| BS 6828-1:1987 | Dental rotary instruments Specification for shanks |
| UNE-EN ISO 25178-602:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| ISO 23519:2010 | Sintered metal materials, excluding hardmetals Measurement of surface roughness |
| CEI EN 50526-1 : 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| AWS C4.6M : 2006 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| I.S. EN 16282-2:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| I.S. EN ISO 1797:2017 | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| UNI EN ISO 25178-3 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS |
| UNE-EN 60099-4:2016 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| UNI EN ISO 25178-6 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
| I.S. EN ISO 1797-3:2013 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
| BIS IS 15311-1 : 2003 AMD 1 | DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS |
| UNI EN ISO 17450-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
| I.S. EN ISO 4287:1999 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| ISO 7986:1997 | Hydraulic fluid power — Sealing devices — Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications |
| BS EN ISO 1302:2002 | Geometrical product specifications (GPS). Indication of surface texture in technical product documentation |
| BS EN ISO 14880-4:2006 | Optics and photonics. Microlens arrays Test methods for geometrical properties |
| BS EN 1974 : 1998 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO 25178-701:2010 | Geometrical product specifications (GPS) Surface texture: Areal Part 701: Calibration and measurement standards for contact (stylus) instruments |
| BS EN ISO 4288:1998 | Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture |
| BS EN 623-4:2004 | Advanced technical ceramics. Monolithic ceramics. General and textural properties Determination of surface roughness |
| BS EN ISO 12085 : 1998 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS |
| BS EN ISO 1797-2:1995 | Dental rotary instruments. Shanks Shanks made of plastics |
| BS EN ISO 5436-1:2001 | Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards |
| IEC 62047-26:2016 | Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures |
| EN 1974:1998+A1:2009 | Food processing machinery - Slicing machines - Safety and hygiene requirements |
| EN 60099-4:2014 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| EN ISO 12780-2:2011 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| CEN ISO/TS 12181-2:2007 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003) |
| EN 13231-4:2013 | Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings |
| CEN/TS 1071-11:2005 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula |
| EN 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| EN ISO 14638:2015 | Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
| EN 13231-3:2012 | Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track |
| EN ISO 18452:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005) |
| I.S. EN ISO 1302:2002 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION |
| EN 1071-1:2003 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer |
| CEN ISO/TS 12780-2:2007 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003) |
| EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| ONORM EN 13231-3 : 2012 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| EN 62047-26:2016 | Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures |
| BS 2634-1:1987 | Roughness comparison specimens Specification for turned, ground, bored, milled, shaped and planed specimens |
| 09/30200407 DC : 0 | BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| DIN EN ISO 25178-3:2012-11 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012 |
| 13/30273328 DC : 0 | BS ISO 16610-32 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 32: ROBUST PROFILE FILTERS: SPLINE FILTERS |
| DD ISO/TS 16610-1:2006 | Geometrical product specifications (GPS). Filtration Overview and basic concepts |
| BS ISO 13473-2:2002 | Characterization of pavement texture by use of surface profiles Terminology and basic requirements related to pavement texture profile analysis |
| BS EN ISO 17509:2016 | Dentistry. Torque transmitter for handpieces |
| BS ISO 18535:2016 | Diamond-like carbon films. Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method |
| 15/30299406 DC : 0 | BS EN ISO 16610-28 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 28: PROFILE FILTERS: END EFFECTS |
| CEI EN 62217 : 2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| UNI EN ISO 12181-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| 12/30258949 DC : 0 | BS ISO 16610-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS |
| BS ISO 10110-8:2010 | Optics and photonics. Preparation of drawings for optical elements and systems Surface texture; roughness and waviness |
| 15/30299409 DC : 0 | BS EN ISO 16610-31 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| BS EN ISO 17450-2:2012 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
| BS EN ISO 18452:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thickness of ceramic films by contact-probe profilometer |
| I.S. EN IEC 60099-8:2018 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| BS EN 50526-2:2014 | Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices |
| 04/104967 DC : DRAFT APR 2004 | ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| PREN 10049 : DRAFT 2013 | MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| 12/30258967 DC : 0 | BS ISO 16610-49 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES |
| UNI EN ISO 25178-701 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| DD CEN ISO/TS 12181-2 : DRAFT 2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| 09/30185454 DC : 0 | BS ISO 10110-8 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE |
| CAN/CSA-ISO/IEC 10373-2:16 | Identification cards - Test methods - Part 2: Cards with magnetic stripes (Adopted ISO/IEC 10373-2:2015, third edition, 2015-01-15) |
| S.R. CEN ISO TS 12181-2:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| EN IEC 60099-8:2018 | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| UNE-EN ISO 12181-2:2012 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| I.S. EN ISO 12181-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| I.S. EN 13231-4:2013 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS |
| I.S. EN ISO 13473-1:2004 | CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH |
| ISO 10766:2014 | Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| PREN 1974 : DRAFT 2016 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| ISO/TS 16610-49:2006 | Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques |
| UNE-EN ISO 25178-6:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009) |
| UNE-EN 16282-4:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements |
| CEI EN 60099-4 : 2015 | SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS |
| ASTM F 2791 : 2015 : REDLINE | Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions |
| I.S. EN 60099-4:2014 | SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS |
| I.S. EN ISO 12085:1998 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| DIN EN 1974:2016-06 (Draft) | Food processing machinery - Slicing machines - Safety and hygiene requirements; German and English version prEN 1974:2016 |
| BS EN 10049:2013 | Measurement of roughness average <i>Ra</i> and peak count <i>RPc</i> on metallic flat products |
| ISO 25178-70:2014 | Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures |
| BS EN ISO 8503-4:1995 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure |
| BS EN ISO 5436-2:2012 | Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards |
| BS EN ISO 4287 : 2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| I.S. EN ISO 9013:2017 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017) |
| I.S. EN 10049:2013 | MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| DIN EN 1974:2010-05 | Food processing machinery - Slicing machines - Safety and hygiene requirements (includes Amendment A1:2009) |
| UNI EN 1974 : 2009 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN ISO 8503-4:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE (ISO 8503-4:2012) |
| I.S. EN ISO 5436-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012) |
| I.S. EN 13231-3:2012 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| I.S. EN 1974:1998 | FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS 1134-1:1988 | Assessment of surface texture Methods and instrumentation |
| VDI/VDE 2655 Blatt 1.2:2010-10 | Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement |
| VDI 3414 Blatt 2:2014-02 (Draft) | Quality evaluation of wooden surfaces - Testing and measuring methods |
| VDI/VDE 2655 Blatt 1.1:2008-03 | Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement |
| VDI 3405 Blatt 1:2013-10 | Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control |
| VDI 3414 Blatt 3:2014-02 (Draft) | Quality evaluation of wooden surfaces - Milled, sawn, planed, drilled and turned surfaces. |
| BS 6393:1987 | Specification for calibration of stylus instruments |
| VDI/VDE 2656 Blatt 1:2008-06 | Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems |
| VDI/VDE 2612 Blatt 5:2015-02 | Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| BS 2634-2:1987 | Roughness comparison specimens Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens |
| VDI/VDE 2602 Blatt 4:2014-09 | Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement |
| DIN EN ISO 25178-601:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| UNI EN ISO 25178-604 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS |
| BS EN 13231-4:2013 | Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in switches and crossings |
| 07/30170832 DC : DRAFT AUG 2007 | BS ISO 25178-602 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| 17/30356577 DC : 0 | BS EN 60099-8 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| I.S. EN ISO 5199:2002 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2 |
| I.S. EN ISO 1797-1:2011 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS |
| 13/30269784 DC : 0 | BS ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNE-EN ISO 25178-3:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012) |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| UNE-EN ISO 17509:2017 | Dentistry - Torque transmitter for handpieces (ISO 17509:2016) |
| ISO 13473-2:2002 | Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis |
| BS EN ISO 25178-606:2015 | Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments |
| 16/30337802 DC : 0 | BS EN 1974 - FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 09/30193829 DC : 0 | BS EN ISO 1797-1 - DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS |
| BS EN 16282-4:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air inlets and outlets; design and safety requirements |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNE-EN ISO 1797-3:2013 | Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013) |
| 04/30125826 DC : DRAFT NOV 2004 | ISO 18452 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THICKNESS OF CERAMIC FILMS BY CONTACT-PROBE PROFILOMETER |
| UNI EN ISO 25178-601 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| BS EN ISO 25178-602:2010 | Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments |
| BS EN 60099-8:2011 | Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| DD ISO/TS 16610-31:2010 | Geometrical product specifications (GPS). Filtration Robust profile filters. Gaussian regression filters |
| 15/30279088 DC : 0 | BS ISO 18535 - DIAMOND-LIKE CARBON FILMS - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF DIAMOND-LIKE CARBON FILMS BY BALL-ON-DISC METHOD |
| DIN 4762:1989-01 | SURFACE ROUGHNESS; TERMINOLOGY; SURFACE & ITS PARAMETERS |
| UNE-EN 16282-2:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements |
| DIN EN ISO 1797-3:2013-06 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
| I.S. CEN/TS 1071-11:2005 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 11: DETERMINATION OF INTERNAL STRESS BY THE STONEY FORMULA |
| 14/30281833 DC : 0 | BS EN ISO 17509 - DENTISTRY - TORQUE TRANSMITTER FOR HANDPIECES USED FOR IMPLANTATION |
| BS ISO/IEC 15457-3:2008 | Identification cards. Thin flexible cards Test methods |
| 09/30198179 DC : 0 | BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES |
| BS EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria |
| UNI EN ISO 25178-602 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| NF EN ISO 25178-602 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| BS EN 16282-8:2017 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing |
| 13/30275599 DC : 0 | BS EN 10049 - MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| ANSI/AAMI/ISO TIR10993-19:2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 19: PHYSICOCHEMICAL, MORPHOLOGICAL, AND TOPOGRAPHICAL CHARACTERIZATION OF MATERIALS |
| 09/30198155 DC : DRAFT MAY 2009 | BS EN ISO 12181-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| BS 7780-2:1994 | Specification for rotary shaft lip type seals Vocabulary |
| 17/30333744 DC : 0 | BS EN ISO 25178-600 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 600: METROLOGICAL CHARACTERISTICS FOR AREAL-TOPOGRAPHY MEASURING METHODS |
| I.S. EN ISO 17450-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
| BS EN ISO 25178-70:2014 | Geometrical product specification (GPS). Surface texture: Areal Material measures |
| UNI EN ISO 25178-70 : 2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| IEC 60099-8:2017 | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| PREN 50526-1 : DRAFT 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| BS EN ISO 13473-1:2004 | Characterization of pavement texture by use of surface profiles Determination of mean profile depth |
| DIN EN ISO 13473-1:2004-07 | Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:1997) |
| UNE-EN 16282-3:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements |
| I.S. EN 16282-3:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| ISO 5597:2010 | Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| EN ISO 1797:2017 | Dentistry - Shanks for rotary and oscillating instruments (ISO 1797:2017) |
| ISO 20808:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method |
| DIN EN 623-4:2005-01 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004 |
| DIN EN ISO 4288:1998-04 | GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| DIN EN ISO 13565-1:1998-04 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997 |
| DIN EN ISO 4287:2010-07 | Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd 1:2009) |
| DIN EN ISO 9013:2003-07 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017) |
| UNE-EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
| BS EN ISO 9905 : 1998 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1 |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| IEC 62217:2012 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| UNE-EN ISO 1797-1:2012 | Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011) |
| EN ISO 25178-6:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010) |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| UNI EN 13231-3 : 2012 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK |
| UNI EN ISO 8503-4 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN ISO 9905 : 2011 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1 |
| UNI EN 10049 : 2014 | MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS |
| UNI EN ISO 1797-1 : 2011 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS |
| UNI EN ISO 5436-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS |
| ONORM EN ISO 12179 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
| UNI EN ISO 15783 : 2009 | Seal-less rotodynamic pumps - Class II - Specification |
| UNI EN ISO 4287 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| UNE-EN ISO 12780-2:2012 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| UNE-EN 13231-4:2014 | Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings |
| DIN ISO 10110-8:2012-02 | Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture; roughness and waviness (ISO 10110-8:2010) |
| 16/30316140 DC : 0 | BS ISO 19674 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF INTERNAL STRESS IN CERAMIC COATINGS BY APPLICATION OF THE STONEY FORMULA |
| I.S. CEN ISO TS 12780-2:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| BS EN ISO 12181-2:2011 | Geometrical product specifications (GPS). Roundness Specification operators |
| I.S. EN 16282-8:2017 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING |
| 14/30261577 DC : 0 | BS EN ISO 9013 - THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| 18/30372409 DC : DRAFT APR 2018 | BS EN ISO 3630-1 - DENTISTRY - ENDODONTIC INSTRUMENTS - PART 1: GENERAL REQUIREMENTS |
| 13/30251855 DC : 0 | BS ISO 25178-606 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS |
| ISO 11952:2014 | Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems |
| I.S. EN ISO 25178-701:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| BS ISO 5597:2010 | Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| 03/104329 DC : DRAFT FEB 2003 | PREN ISO 8325 - DENTISTRY - TEST METHODS FOR ROTARY INSTRUMENTS |
| 02/207432 DC : DRAFT JUN 2002 | IEC 62217. ED.1.0 - CREATION OF A COMMON CLAUSE STANDARD FOR COMPOSITE INSULATORS |
| I.S. EN 623-4:2004 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - PART 4: DETERMINATION OF SURFACE ROUGHNESS |
| I.S. EN ISO 8325:2004 | DENTISTRY - TEST METHODS FOR ROTARY INSTRUMENTS |
| DIN EN ISO 14638:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| BS ISO/IEC 10373-2:2015 | Identification cards. Test methods Cards with magnetic stripes |
| DIN EN ISO 12780-2:2011-07 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| BS ISO 13473-3:2002 | Characterization of pavement texture by use of surface profiles Specification and classification of profilometers |
| BS EN ISO 16610-41:2015 | Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters |
| DIN 13950-1:1990-05 | DENTISTRY - DENTAL ROTARY INSTRUMENTS - SHANKS |
| BS EN 16282-3:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements |
| BS ISO 10766:2014 | Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| BS ISO/TR 10064-4:1998 | Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking |
| 07/30154358 DC : DRAFT AUG 2007 | DD ISO/TS 25178-6 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: ARIAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
| BS EN ISO 16610-28:2016 | Geometrical product specifications (GPS). Filtration Profile filters: End effects |
| BS EN ISO 14638:2015 | Geometrical product specifications (GPS). Matrix model |
| BS 7784(1994) : 1994 AMD 9864 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS I |
| 11/30205376 DC : 0 | BS EN ISO 25178-605 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS |
| 00/715013 DC : DRAFT OCT 2000 | PREN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF RAIL GRINDING, MILLING AND PLANING WORK IN TRACK |
| I.S. EN ISO 16610-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| BS ISO 13565-1 : 1996 AMD 9949 | GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - FILTERING AND GENERAL MEASUREMENT CONDITIONS |
| BS EN ISO 16610-49:2015 | Geometrical product specifications (GPS). Filtration Morphological profile filters: Scale space techniques |
| BS 7079-C4(1989) : 1989 AMD 8654 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS & RELATED PRODUCTS - METHOD FOR THE CALIBRATION DETERMINATION OF SURFACE PROFILE USING A STYLUS INSTRUMENT |
| 12/30258964 DC : 0 | BS ISO 16610-41 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS |
| DD ISO/TS 17450-2:2002 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications,operators and uncertainties |
| BS ISO 20808:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method |
| BS EN 16282-2:2016 | Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements |
| 09/30198161 DC : 0 | BS EN ISO 12780-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| NF EN ISO 25178-701 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| ISO/TS 16610-1:2006 | Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts |
| I.S. EN ISO 14638:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| UNI EN ISO 1797-3 : 2013 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS |
| DD CEN/TS 1071-11:2005 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of internal stress by the Stoney formula |
| ISO/TS 16610-28:2010 | Geometrical product specifications (GPS) Filtration Part 28: Profile filters: End effects |
| AWS C4.6M:2006(R2012) | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES |
| BS ISO 4287:1997 | Geometric product specifications (GPS). Surface texture: profile method. Terms, definitions and surface texture parameters |
| PREN 4400-2 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 2: SHEET AND STRIP |
| INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| UNE-EN ISO 25178-601:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| I.S. EN 61189-2:2006 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES |
| I.S. EN 62217:2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV)) |
| I.S. EN 60099-8:2011 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| I.S. EN ISO 16610-31:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016) |
| I.S. EN 16282-4:2016 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS |
| I.S. EN ISO 25178-604:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
| I.S. EN 50526-1:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| ISO 13473-3:2002 | Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers |
| IEC 62848-1:2016 | Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps |
| ISO 16311-4:2014 | Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| ISO/TS 10993-19:2006 | Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials |
| I.S. EN ISO 12780-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
| DIN EN ISO 1797-1:2011-11 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS (ISO 1797-1:2011) |
| DIN EN 10049:2014-03 | Measurement of roughness average Ra and peak count RPc on metallic flat products |
| ISO/TS 12181-2:2003 | Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators |
| BS EN ISO 9013:2017 | Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances |
| ISO 16610-1:2015 | Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts |
| ISO 5436-2:2012 | Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards |
| BS EN ISO 13565-2:1998 | Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the linear material ration curve |
| ISO 15783:2002 | Seal-less rotodynamic pumps — Class II — Specification |
| ISO 1797-3:2013 | Dentistry Shanks for rotary instruments Part 3: Shanks made of ceramics |
| UNE-EN 13231-3:2013 | Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track |
| ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
| UNE-EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| ISO 25178-3:2012 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators |
| ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
| ISO 8325:2004 | Dentistry — Test methods for rotary instruments |
| ISO 1797-1:2011 | Dentistry Shanks for rotary instruments Part 1: Shanks made of metals |
| IEC 60099-4:2014 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
| ISO 18452:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of thickness of ceramic films by contact-probe profilometer |
| ISO 25178-604:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| ISO 5199:2002 | Technical specifications for centrifugal pumps — Class II |
| BS EN ISO 13565-1:1998 | Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions |
| ISO/TS 12780-2:2003 | Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators |
| ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
| ISO 16610-28:2016 | Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects |
| ISO 9013:2017 | Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances |
| ISO 5436-1:2000 | Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures |
| ISO 16610-49:2015 | Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques |
| ISO 25178-6:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 6: Classification of methods for measuring surface texture |
| ISO 9905:1994 | Technical specifications for centrifugal pumps — Class I |
| ISO 1797-2:1992 | Dental rotary instruments Shanks Part 2: Shanks made of plastics |
| IEC 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| ISO 16610-41:2015 | Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters |
| ISO 16610-31:2016 | Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters |
| UNE-EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| ISO 25178-602:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments |
| ISO 25178-606:2015 | Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments |
| ISO 12179:2000 | Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN ISO 16610-1:2015 | Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) |
| EN ISO 25178-606:2015 | Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) |
| EN ISO 5436-2:2012 | Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) |
| EN ISO 16610-28:2016 | Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016) |
| I.S. EN ISO 12179:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
| I.S. EN ISO 13565-2:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO |
| EN 623-4:2004 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness |
| EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| EN ISO 16610-49:2015 | Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015) |
| EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
| EN ISO 14880-4:2006 | Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) |
| EN ISO 25178-602:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| EN ISO 5199:2002 | Technical specifications for centrifugal pumps - Class II (ISO 5199:2002) |
| EN ISO 25178-701:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| EN ISO 25178-3:2012 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012) |
| EN ISO 5436-1:2000 | Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000) |
| EN ISO 8325:2004 | Dentistry - Test methods for rotary instruments (ISO 8325:2004) |
| EN ISO 1797-3:2013 | Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013) |
| EN ISO 25178-70:2014 | Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) |
| EN ISO 16610-41:2015 | Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015) |
| EN ISO 25178-601:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| EN ISO 17450-2:2012 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| EN 753-3 : 1999 | IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS |
| EN ISO 13565-1:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996) |
| EN ISO 17509:2016 | Dentistry - Torque transmitter for handpieces (ISO 17509:2016) |
| EN ISO 16610-31:2016 | Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016) |
| EN ISO 25178-604:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) |
| I.S. EN ISO 4288:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| I.S. EN ISO 13565-3:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE -PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE |
| EN ISO 1797-1:2011 | Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011) |
| EN 16282-8:2017 | Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing |
| UNE-EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| ISO 18535:2016 | Diamond-like carbon films Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method |
| DIN EN ISO 25178-604:2013-12 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
| DD ISO/TS 16610-28:2010 | Geometrical product specifications (GPS). Filtration Profile filters. End effects |
| DIN EN ISO 18452:2016-09 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005) |
| BS ISO 23519:2010 | Sintered metal materials, excluding hardmetals. Measurement of surface roughness |
| BS 2634-3:1980 | Specification for roughness comparison specimens Cast surfaces |
| DIN ISO 23519:2015-12 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS (ISO 23519:2010) |
| DIN EN ISO 16610-31:2015-09 (Draft) | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016) |
| DIN EN ISO 25178-602:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| 11/30197571 DC : 0 | BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON |
| UNE-EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| 05/30127945 DC : DRAFT JAN 2005 | ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES |
| DIN EN ISO 12181-2:2011-07 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| 11/30243837 DC : 0 | BS EN 62217 - POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| ISO/TS 16610-41:2006 | Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters |
| BS EN ISO 16610-1:2015 | Geometrical product specifications (GPS). Filtration Overview and basic concepts |
| 07/30170829 DC : DRAFT AUG 2007 | BS ISO 25178-601 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| BS EN ISO 16610-31:2016 | Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters |
| DIN EN ISO 25178-6:2010-06 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010) |
| 14/30294910 DC : 0 | BS EN 62047-26 ED1.0 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 26: DESCRIPTION AND MEASUREMENT METHODS FOR MICRO TRENCH AND NEEDLE STRUCTURES |
| 08/30171709 DC : DRAFT JAN 2008 | BS EN ISO 25178-701 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| ISO 13473-1:1997 | Characterization of pavement texture by use of surface profiles Part 1: Determination of Mean Profile Depth |
| DIN EN ISO 16610-1:2015-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| BS EN ISO 25178-601:2010 | Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments |
| BS EN ISO 1797-3:2013 | Dentistry. Shanks for rotary instruments Shanks made of ceramics |
| I.S. EN ISO 16610-41:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015) |
| 15/30291323 DC : 0 | BS EN ISO 1797 - DENTISTRY - SHANKS FOR ROTARY, OSCILLATING AND RECIPROCATING INSTRUMENTS |
| BS EN ISO 25178-6:2010 | Geometrical product specifications (GPS). Surface texture. Areal Classification of methods for measuring surface texture |
| NF ISO 5597 : 2010 | HYDRAULIC FLUID POWER - CYLINDERS - DIMENSIONS AND TOLERANCES OF HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS |
| BS ISO 6123-2:2015 | Rubber or plastics covered rollers. Specifications Surface characteristics |
| BS ISO 4288 : 96 AMD 9918 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD: RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| BS EN ISO 1797:2017 | Dentistry. Shanks for rotary and oscillating instruments |
| 08/30176943 DC : 0 | BS ISO 23519 - SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS |
| 08/30174605 DC : DRAFT SEP 2008 | BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| 01/648266 DC : DRAFT MAY 2001 | ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| ISO 12301:2007 | Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
| NF EN 60099-8 : 2011 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| CSA ISO/IEC 15457-3 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| I.S. EN 62047-26:2016 | SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 26: DESCRIPTION AND MEASUREMENT METHODS FOR MICRO TRENCH AND NEEDLE STRUCTURES |
| DIN EN 13231-4:2013-06 | Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings |
| ISO 1797:2017 | Dentistry — Shanks for rotary and oscillating instruments |
| PREN 4400-3 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| ISO/TS 16610-32:2009 | Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters |
| ISO 19674:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula |
| I.S. EN ISO 25178-606:2015 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015) |
| I.S. EN 50526-2:2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| CEI EN 50526-2 : 2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| ISO 6123-2:2015 | Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics |
| BS EN 60099-4:2014 | Surge arresters Metal-oxide surge arresters without gaps for a.c. systems |
| UNE-EN ISO 25178-701:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| UNI EN 13231-4 : 2013 | RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS |
| ISO/IEC 10373-2:2015 | Identification cards Test methods Part 2: Cards with magnetic stripes |
| EN ISO 13473-1:2004 | Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth (ISO 13473-1:1997) |
| CEI EN 60099-8 : 2012 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| NF EN ISO 25178-601 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| ISO 10110-8:2010 | Optics and photonics Preparation of drawings for optical elements and systems Part 8: Surface texture; roughness and waviness |
| ISO/TR 10064-4:1998 | Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| I.S. EN ISO 25178-601:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| ISO/TS 16610-31:2010 | Geometrical product specifications (GPS) Filtration Part 31: Robust profile filters: Gaussian regression filters |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| I.S. EN ISO 25178-602:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| I.S. EN ISO 25178-6:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
| DIN EN ISO 8503-4:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| ISO 17509:2016 | Dentistry Torque transmitter for handpieces |
| ISO 12181-2:2011 | Geometrical product specifications (GPS) Roundness Part 2: Specification operators |
| ISO 25178-601:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments |
| BS EN ISO 15783 : 2003 | SEAL-LESS ROTODYNAMIC PUMPS - CLASS 2 - SPECIFICATION |
| BS EN 1071-1:2003 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by contact probe filometer |
| BS EN ISO 5199:2002 | Technical specifications for centrifugal pumps. Class II |
| BS EN ISO 1797-1:2011 | Dentistry. Shanks for rotary instruments Shanks made of metals |
| BS EN 13231-3:2012 | Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in track |
| BS EN ISO 12179:2001 | Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments |
| BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
| ISO 12780-2:2011 | Geometrical product specifications (GPS) Straightness Part 2: Specification operators |
| BS EN ISO 13565-3:2000 | Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the material probability curve |
| BS EN 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for materials for interconnection structures |
| BS EN ISO 8325:2004 | Dentistry. Test methods for rotary instruments |
| ISO 14880-4:2006 | Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| DIN EN ISO 5199:2003-12 | TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2 |
| EN ISO 13565-3:2000 | Geometrical Product Specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 3: Height characterization using the material probability curve (ISO 13565-3:1998) |
| DIN EN 13231-3:2012-04 | Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track |
| EN 10049:2013 | Measurement of roughness average Ra and peak count RPc on metallic flat products |
| DIN EN ISO 5436-2:2013-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012) |
| DIN EN ISO 14923:2003-10 | THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS |
| EN ISO 12181-2:2011 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| EN ISO 1302:2002 | Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| EN ISO 13565-2:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method; surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996) |
| IEC 60099-8:2017 RLV | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| DIN EN ISO 14880-4:2006-08 | Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) |
| DIN EN ISO 16610-31:2017-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016) |
| DIN EN ISO 8325:2004-12 | Dentistry - Test methods for rotary instruments (ISO 8325:2004) |
| DIN EN ISO 15783:2010-04 | Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002 + Amd.1:2008) (includes Amendment A1:2008) |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| ISO 5436:1985 | Calibration specimens Stylus instruments Types, calibration and use of specimens |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.