ISO 3170:2004
Current
Current
The latest, up-to-date edition.
Petroleum liquids — Manual sampling
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
01-19-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 3170:2004 specifies the manual methods to be used for obtaining samples of liquid or semi-liquid hydrocarbons, tank residues and deposits from fixed tanks, railcars, road vehicles, ships and barges, drums and cans, or from liquids being pumped in pipelines.
ISO 3170:2004 applies to the sampling of petroleum products, crude oils and intermediate products, which are stored in tanks at or near atmospheric pressure, or transferred by pipelines, and are handled as liquids at temperatures from near ambient up to 200 degrees Celsius.
The sampling procedures specified are not intended for the sampling of special petroleum products which are the subject of other International Standards, such as electrical insulating oils (IEC 60475), liquefied petroleum gases (ISO 4257), liquefied natural gases (ISO 8943) and gaseous natural gases (ISO 10715).
| Committee |
ISO/TC 28/SC 2
|
| DevelopmentNote |
Supersedes ISO/DIS 3170 (01/2004) Supersedes IP PETROLEUM MEASUREMENT PT 6 SEC 1 (07/2004)
|
| DocumentType |
Standard
|
| Pages |
55
|
| ProductNote |
ISO 1998 THIS STANDARD ALSO REFERES
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 3170 : 2004 | Identical |
| BS 2000-475(2004) : 2004 | Identical |
| NEN EN ISO 3170 : 2004 | Identical |
| I.S. EN ISO 3170:2004 | Identical |
| PN EN ISO 3170 : 2006 | Identical |
| SAC GB/T 4756 : 1998 | Identical |
| SN EN ISO 3170 : 2004 | Identical |
| UNI EN ISO 3170 : 2005 | Identical |
| SS-EN ISO 3170:2004 | Identical |
| UNE-EN ISO 3170:2004 | Identical |
| BS EN ISO 3170:2004 | Identical |
| EN ISO 3170:2004 | Identical |
| DIN EN ISO 3170:2004-06 | Identical |
| UNE 51020:1981 | Identical |
| BS 3195-1:1989 | Similar to |
| BS 3195-1:1978 | Similar to |
| NFM 07 001 : 1998 | Similar to |
| NBN ISO 3170 : 1991 | Similar to |
| BS 2000-609(2012) : 2012 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS EN 16734 : 2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| 13/30275105 DC : 0 | BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| 17/30345962 DC : 0 | BS EN ISO 20623 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF LUBRICANTS - FOUR-BALL METHOD (EUROPEAN CONDITIONS) |
| UNE-EN 15721:2014 | Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method |
| 14/30299493 DC : 0 | BS EN 14112 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| DIN EN 16136:2015-04 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS EN ISO 2592:2017 | Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
| I.S. CEN TR 15367-3:2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| 14/30294041 DC : 0 | BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS |
| 09/30206692 DC : 0 | BS EN 228 - AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| BS EN 16997:2017 | Liquid petroleum products. Determination of the sulfur content in Ethanol (E85) automotive fuel. Wavelength dispersive X-ray fluorescence spectrometric method |
| PD CEN/TR 16557:2013 | Automotive fuels. High FAME diesel fuel blends (B11-B30). Background to the parameters required and their respective limits and determination |
| 10/30228224 DC : 0 | BS EN 16136 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| DIN EN 16900 E : 2017 | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN TR 15367-2:2007 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 2: AUTOMOTIVE PETROL FUELS |
| BS EN 16329:2013 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Linear cooling bath method |
| I.S. EN 14517:2004 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| 14/30295249 DC : 0 | BS EN 16715 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| BIS IS 1448-39 : 2012 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 39: DETERMINATION OF VAPOUR PRESSURE - REID METHOD |
| I.S. EN 14078:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS EN 15837:2009 | Ethanol as a blending component for petrol. Determination of phosphorus, copper and sulfur content. Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| 04/30113349 DC : DRAFT MAY 2004 | ISO 4263-3 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS - TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS |
| I.S. EN 12662:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
| BS EN 16715:2015 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| BS ISO 12922 : 99 AMD 13874 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| BS EN 16761-1:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using single column technique |
| BS 2000-579(2009) : 2009 COR 2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| 09/30205523 DC : 0 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| BS 2000-602(2013) : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| BS ISO 4268:2000 | Petroleum and liquid petroleum products. Temperature measurements. Manual methods |
| XP ISO/TS 11365 : 2011 XP | PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR THE MAINTENANCE AND USE OF TRIARYL PHOSPHATE ESTER TURBINE-CONTROL FLUIDS |
| BS EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers. Requirements and test methods |
| I.S. EN 116:2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| UNE-EN 16934:2018 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| BS 2000-465(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| 13/30274224 DC : 0 | BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS EN 15938:2010 | Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity |
| DD ISO/TS 11365:2011 | Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
| 03/300854 DC : DRAFT JAN 2003 | ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| UNE-EN 14865-1:2010 | Railway Applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
| DIN 55679 : 1985 | PAINTS, VARNISHES AND RELATED PRODUCTS; DETERMINATION OF FLASHPOINT; RAPID EQUILIBRIUM METHOD |
| 07/30172878 DC : 0 | BS ISO 10307-1 - PETROLEUM PRODUCTS - TOTAL SEDIMENT IN RESIDUAL FUEL OILS - PART 1: DETERMINATION BY HOT FILTRATION |
| DIN EN 15794:2010-02 | Determination of explosion points of flammable liquids |
| 14/30294038 DC : 0 | BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHY METHOD |
| DIN EN 15691:2009-07 | Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method |
| DIN EN 15692:2009-08 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
| 11/30249539 DC : 0 | BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| BS ISO 13579-1:2013 | Industrial furnaces and associated processing equipment. Method of measuring energy balance and calculating efficiency General methodology |
| NF EN ISO 13032 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| 07/30159027 DC : 0 | BS EN 14865-1 - RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE ORDINARY-SPEED VEHICLES WITH SPEEDS UP TO 200 KM/H AND HIGH-SPEED VEHICLES WITH SPEEDS UP TO 300 KM/H |
| 15/30301955 DC : 0 | BS EN ISO 3924 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| BS 2000-606(2015) : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| BS EN 16143:2013 | Petroleum products. Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils. Procedure using double LC cleaning and GC/MS analysis |
| 12/30258729 DC : 0 | BS EN 15721 - ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| I.S. EN 14522:2005 | DETERMINATION OF THE AUTO IGNITION TEMPERATURE OF GASES AND VAPOURS |
| 09/30205353 DC : 0 | BS EN ISO 20846 - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD |
| 08/30181966 DC : DRAFT MAY 2008 | BS ISO 13739 - PETROLEUM PRODUCTS - PROCEDURES FOR THE TRANSFER OF BUNKER FUEL TO SHIPS |
| 11/30244505 DC : 0 | BS EN 16294 - PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICPOES) |
| 03/300855 DC : DRAFT JAN 2003 | ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| PD CEN/TR 14489:2005 | Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
| 03/108481 DC : DRAFT MAY 2003 | ISO 11223 - PETROLEUM AND LIQUID PETROLEUM PRODUCTS - DIRECT STATIC MEASUREMENTS - MEASUREMENT OF CONTENT OF VERTICAL STORAGE TANKS BY HYDROSTATIC TANK GAUGING |
| I.S. EN ISO 3405:2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| DD CEN/TS 15293:2011 | Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods |
| BS EN 15944:2010 | Liquid petroleum products. Determination of nickel and vanadium content. Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| 12/30264358 DC : 0 | BS EN 1601 - LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| IP 606 : 2016 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| DIN ISO 15380:2004-05 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HETG, HEPG, HEES AND HEPR |
| PD CEN/TR 17103:2017 | Petroleum and related products. Fast pyrolysis bio-oils for stationary internal combustion engines. Quality determination |
| DIN ISO 6617:2011-04 | Petroleum-based lubricating oils - Aging characteristics - Determination of change in Conradson carbon residue after oxidation (ISO 6617:1994) |
| 03/314396 DC : 0 | ISO 20139 - RUBBER COMPOUNDING INGREDIENTS - PROCESS OILS - METHODS OF TEST AND CLASSIFICATION |
| BS ISO 6296:2000 | Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration method |
| 08/30181649 DC : DRAFT JULY 2008 | BS EN 15837 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC DIRECT METHOD |
| 06/30147357 DC : DRAFT MAR 2006 | EN 15488 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| ISO/TR 19686-1:2014 | Petroleum products Equivalency of test method determining the same property Part 1: Atmospheric distillation of petroleum products |
| BS ISO 13357-2:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for dry oils |
| BIS IS 1448-16 : 2014 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 16: CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS - LABORATORY DETERMINATION OF DENSITY - HYDROMETER METHOD |
| PREN ISO 13736 : DRAFT 2011 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| S.R. CEN/TR 16557:2013 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL BLENDS (B11 - B30) - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION |
| BS 2000-412(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS |
| IP 336 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| IP 309 : 2016 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| I.S. EN 16934:2017 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| S.R. CEN/TS 15940:2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16143:2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| I.S. EN 61221:2004 | PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
| S.R. CEN/TS 16640:2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| I.S. EN 15837:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| API MPM CH17.9 : 2012+ADD 1 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17 - MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF) |
| I.S. EN 12177:1998 | LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF BENZENE CONTENT BY GAS CHROMATOGRAPHY |
| BS 2000-582(2016) : 2016 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD (ISO 3924:2016) |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| UNE-EN 15779:2010 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (>= 4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| BS 2000-595(2011) : 2011 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| ISO/TR 13739:1998 | Petroleum products Methods for specifying practical procedures for the transfer of bunker fuels to ships |
| ISO 15167:1999 | Petroleum products Determination of particulate content of middle distillate fuels Laboratory filtration method |
| DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| UNI EN ISO 9038 : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
| BS EN 12916:2016 | Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection |
| BS 2000-138(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF OXIDATION STABILITY OF AVIATION FUEL - POTENTIAL RESIDUE METHOD |
| DIN EN 16997:2016-05 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| IP 143 : 2015 | DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| BS 2000-509(2013) : 2013 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS |
| 17/30363912 DC : 0 | BS EN 17178 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| BS 2000-123(2011) : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE (ISO 3405:2011) |
| UNI EN ISO 3405 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| I.S. EN 16640:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS 2000-388(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY OF MIDDLE-DISTILLATE FUELS |
| I.S. EN 16144:2012 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
| EN 16734:2016 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| BS 2000-547(2006) : 2006 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| ASTM D 7500 : 2015 : REDLINE | Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography |
| BS 2000-574(2014) : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| I.S. EN 13016-3:2018 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| I.S. CEN TR 15522-1:2006 | OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 1: SAMPLING |
| BS EN 16709 : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| I.S. EN 15484:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
| UNI EN ISO 20846 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD |
| ISO 5165:2017 | Petroleum products Determination of the ignition quality of diesel fuels Cetane engine method |
| I.S. EN ISO 20846:2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011) |
| I.S. EN ISO 20884:2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN ISO 6246:2017 | PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017) |
| I.S. EN 228:2017 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 20783-1:2011-04 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011) |
| BS EN 14538:2006 | Fat and oil derivatives. Fatty acid methyl ester (FAME). Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| BS EN ISO 12937:2001 | Methods of test for petroleum and its products. BS 2000-438. Petroleum products. Determination of content. Coulometric Karl Fischer titration method |
| BS EN ISO 9038:2013 | Determination of sustained combustibility of liquids |
| BS EN 14517:2004 | Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method |
| BS EN 15490:2007 | Ethanol as a blending component for petrol. Determination of pHe |
| BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
| BS EN 15487:2007 | Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method |
| BS EN ISO 5164:2014 | Petroleum products. Determination of knock characteristics of motor fuels. Research method |
| BS EN ISO 20783-2:2003 | Petroleum and related products. Determination of emulsion stability of fire-resistant fluids Fluids in category HFB |
| BS EN 15485:2007 | Ethanol as a blending component for petrol. Determination of sulfur content. Wavelength dispersive X-ray fluorescence spectrometric method |
| BS EN 15199-2:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Heavy distillates and residual fuel |
| EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| BS EN ISO 4404-2:2010 | Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Non-aqueous fluids |
| BS EN 15491:2007 | Ethanol as a blending component for petrol. Determination of total acidity. Colour indicator titration method |
| BS EN ISO 4263-4:2006 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for industrial gear oils |
| BS EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS EN 14077:2003 | Petroleum products. Determination of organic halogen content. Oxidative microcoulometric method |
| UNE-EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| BS EN 12662:2014 | Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| ISO 5164:2014 | Petroleum products — Determination of knock characteristics of motor fuels — Research method |
| BS EN ISO 6246:1998 | Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method |
| BS EN 14078:2014 | Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method |
| BS EN ISO 20783-1:2011 | Petroleum and related products. Determination of emulsion stability of fire-resistant fluids Fluids in category HFAE |
| DIN EN 15490:2007-11 | Ethanol as a blending component for petrol - Determination of pHe |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| DIN EN 15938:2010-12 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN 12766-1:2000 | Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| DIN EN 228:2004-03 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| DIN EN 15485:2007-11 | Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method |
| DIN EN 15488:2007-11 | Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method |
| EN 12953-11:2003 | Shell boilers - Part 11: Acceptance tests |
| DIN EN 15489:2007-11 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method |
| DIN EN 15944:2011-02 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| DIN EN ISO 5164:2014-10 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
| DIN EN 15199-1:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| CEN/TS 16640:2014 | Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method |
| DIN ISO 6614:2002-04 | PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS |
| DIN EN ISO 20847:2004-07 | Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004) |
| EN 12634:1998 | Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method |
| DIN EN 1601:2017-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| EN ISO 20884:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2011) |
| DIN EN ISO 8754:2003-12 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DIN EN 15484:2007-11 | Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method |
| EN 13016-2:2007 | Liquid petroleum products - Vapour pressure - Part 2: Determination of absolute pressure(AVP) between 40 C and 100 C |
| EN 12662:2014 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| DIN EN 14832:2005-09 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
| ONORM EN 16329 : 2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS MA 100:1989 | Specification for petroleum fuels for marine oil engines and boilers |
| ONORM EN 16568 : 2015 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| ONORM EN ISO 3679 : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
| I.S. EN 14865-2:2006 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| ONORM EN 15195 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| 11/30232917 DC : 0 | BS ISO 13579-1 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - METHOD OF MEASURING ENERGY BALANCE AND CALCULATING EFFICIENCY - PART 1: GENERAL METHODOLOGY |
| DIN EN 16294:2013-02 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| DIN ISO 9120:2005-08 | Petroleum and related products - Determination of air-release properties of steam turbine and other oils - Impinger method (ISO 9120:1997) |
| BS ISO 3987:2010 | Petroleum products. Determination of sulfated ash in lubricating oils and additives |
| 05/30098184 DC : DRAFT MAY 2005 | ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
| UNI EN ISO 13032 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| 02/122316 DC : DRAFT MAY 2002 | ISO/DIS 20884 - PETROLEUM PRODUCTS - DETERMINATION OF LOW SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| PREN 12662 : DRAFT 2012 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| PD CEN/TR 16514:2013 | Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol |
| EI HM 49 : 2012 | MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF) |
| BS 2000-606(2012) : 2012 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL - GAS CHROMATOGRAPHIC METHOD |
| BS 2000-57(1995) : 1995 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE SMOKE POINT OF KEROSINE |
| BS 2000-476(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-476: PETROLEUM LIQUIDS - AUTOMATIC PIPELINE SAMPLING |
| BS 2000-447(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| PREN 16135 : DRAFT 2010 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS) |
| ONORM EN ISO 3405 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| 13/30277780 DC : 0 | BS EN 16576 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DISTILLATE FUELS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS ISO 9038 : 2002 AMD 15159 | TEST FOR SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| BS 4385-1(1991) : AMD 8663 | METHODS FOR DETERMINATION OF WATER IN CRUDE PETROLEUM, PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS BY DISTILLATION |
| BS 2000-581(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| BS 2000-454(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF PHOSPHORUS IN GASOLINE - SPECTROPHOTOMETRIC METHOD |
| BS 2000-552(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
| 08/30183846 DC : DRAFT AUG 2008 | BS EN 14078 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| 12/30261072 DC : 0 | BS ISO 4261 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF GAS TURBINE FUELS FOR INDUSTRIAL AND MARINE APPLICATIONS |
| DIN EN 16761-1:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| PD ISO/TR 19686-1:2014 | Petroleum products. Equivalency of test method determining the same property Atmospheric distillation of petroleum products |
| 08/30175752 DC : DRAFT JAN 2008 | BS ISO 3987 - PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES |
| BS EN 16270:2015 | Automotive fuels. Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel. Gas chromatographic method |
| I.S. EN 16734:2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| 06/30149512 DC : DRAFT APR 2006 | EN ISO 14596 - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DEFSTAN 91-66/2(1995) : 1995 | THE SEGREGATION, HANDLING AND QUALITY ASSURANCE OF PETROLEUM FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
| 16/30336853 DC : 0 | BS EN 16997 - LIQUID PETROLEUM PRODUCT - DETERMINATION OF SULFUR CONTENT IN ETHANOL CONTAINING PETROL E85 - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| 15/30325297 DC : 0 | BS EN 16896 - PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER VISCOMETER |
| 12/30261556 DC : 0 | BS ISO 5163 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
| 11/30214536 DC : 0 | BS EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| I.S. EN 16900:2017 | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| PREN 15487 : DRAFT 2006 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD |
| BS ISO 28343:2010 | Rubber compounding ingredients. Process oils. Determination of glass transition temperature by DSC |
| DIN EN 15721:2013-12 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| BS EN ISO 16591:2010 | Petroleum products. Determination of sulfur content. Oxidative microcoulometry method |
| BS ISO 20843 : 2003 AMD 15160 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC |
| 08/30178054 DC : DRAFT FEB 2008 | BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| 06/30147369 DC : 0 | EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - ION CHROMATOGRAPHIC METHOD |
| BS 2000-53(1999) : 1999 | CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD |
| BS EN 61221:2004 | Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications |
| BS 2000-555(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD |
| DIN EN 15751 E : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| EN ISO 9038:2013 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| BS 2000-524(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 10/30205520 DC : 0 | BS EN 16144 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - FIXED RANGE INJECTION PERIOD, CONSTANT VOLUME COMBUSTION CHAMBER METHOD |
| PREN 13016-3 : DRAFT 2016 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| PREN 15195 : DRAFT 2013 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| DIN EN 15492:2012-04 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
| PREN 15721 : DRAFT 2012 | ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| DIN EN ISO 13032:2012-06 | Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012) |
| 18/30358441 DC : DRAFT APR 2018 | BS EN ISO 3016 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF POUR POINT |
| BS ISO 8697:1999 | Crude petroleum and petroleum products. Transfer accountability. Assessment of on board quantity (OBQ) and quantity remaining on board (ROB) |
| BS ISO 9403:2000 | Crude petroleum. Transfer accountability. Guidelines for cargo inspection |
| PREN 17057 : DRAFT 2016 | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| 07/30156264 DC : 0 | BS ISO 8820-1 - ROAD VEHICLES - FUSE-LINKS - PART 1: DEFINITIONS AND GENERAL TEST REQUIREMENTS |
| PREN ISO 5164 : DRAFT 2012 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO/DIS 5164:2012) |
| BS EN 15199-4:2015 | Petroleum products. Determination of boiling range distribution by gas chromatography method Light fractions of crude oil |
| BS 2000-170(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND OTHER LIQUIDS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| 17/30352977 DC : 0 | BS ISO 15029-2 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SPRAY IGNITION CHARACTERISTICS OF FIRE-RESISTANT FLUIDS - PART 2: SPRAY TEST - STABILIZED FLAME HEAT RELEASE METHOD |
| BS 2000-480(2006) : 2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS |
| BS 2000-557(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE |
| BS 2000-589(2015) : 2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| IP 14 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - RAMSBOTTOM METHOD |
| ISO 19378:2003 | Lubricants, industrial oils and related products (class L) — Machine-tool lubricants — Categories and specifications |
| EI HM 52 : 2009 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.11: MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT |
| I.S. EN 15199-3:2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| API MPM CH17.9 : 2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17 - MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF) |
| PREN 15492 : DRAFT 2010 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| 02/120652 DC : DRAFT FEB 2002 | ISO/DIS 20843 - PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CLASSES HFA AND HFC |
| PREN 16761-2 : DRAFT 2014 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| UNE-EN 16896:2017 | Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter |
| BS 2000-588(2011) : 2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BIS IS 1448-122 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 122: PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - CONRADSON METHOD |
| I.S. EN 16709:2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| BS 2000-356(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD |
| BS 2000-456(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF POTASSIUM IN GASOLINE - ATOMIC ABSORPTION SPECTROMETRY (AAS) METHOD |
| BS EN ISO 3924:2016 | Petroleum products. Determination of boiling range distribution. Gas chromatography method |
| BS 2000-365(1996) : 1996 | METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM AND PETROLEUM PRODUCTS - DETERMINATION OF DENSITY - OSCILLATING U-TUBE METHOD |
| BS 2000-236(2014) : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
| UNE-EN 15492:2012 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
| DIN EN 15940:2016-09 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| IP 412 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF WATER SEPARABILITY OF PETROLEUM OILS AND SYNTHETIC FLUIDS |
| BIS IS 1448-27 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 27: DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| I.S. EN 16136:2015 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| I.S. EN 16091:2011 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| BS 2000-462(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-462: PETROLEUM PRODUCTS AND USED OILS - DETERMINATION OF PCBS AND RELATED PRODUCTS - PART 1: SEPARATION AND DETERMINATION OF SELECTED PCB CONGENERS BY GAS CHROMATOGRAPHY (GC) USING AN ELECTRON CAPTURE DETECTOR (ECD) |
| UNI EN 15691 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| ISO 6250:1997 | Petroleum products Determination of the water reaction of aviation fuels |
| BS EN 16136:2015 | Automotive fuels. Determination of manganese and iron content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| UNE-EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| ISO 3012:1999 | Petroleum products Determination of thiol (mercaptan) sulfur in light and middle distillate fuels Potentiometric method |
| UNI EN 15492 : 2012 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULPHATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| DIN EN 590:2017-10 | Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017) |
| S.R. CWA 16379:2011 | FUELS AND BIOFUELS - PURE PLANT OIL FUEL FOR DIESEL ENGINE CONCEPTS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| BS 2000-143(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS |
| UNI EN 15779 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS 2000-34(2016) : 2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| API MPM CH17.11 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 17.11 - MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT - EL HYDROCARBON MANAGEMENT HM 52 |
| BS 2000-143(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 143: DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS |
| UNI EN 15794 : 2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| UNI EN ISO 13736 : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| ISO 13579-1:2013 | Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 1: General methodology |
| I.S. EN 14865-1:2009 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| I.S. EN 15692:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| I.S. EN 237:2004 | LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| ISO 4262:1993 | Petroleum products — Determination of carbon residue — Ramsbottom method |
| I.S. EN 12916:2016 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| I.S. EN 15491:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD |
| UNI EN ISO 20884 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 15486:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - ULTRAVIOLET FLUORESCENCE METHOD |
| I.S. EN 15691:2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| DIN EN ISO 12922:2013-04 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| DIN EN 1601:2016-06 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| DIN EN 12953-11:2003-12 | SHELL BOILERS - PART 11: ACCEPTANCE TESTS |
| DIN EN 13016-2:2007-11 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C |
| DIN EN ISO 4263-1:2005-03 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils (ISO 4263-1:2003) |
| DIN EN 12662:2014-07 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| DIN EN 14105:2011-07 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents |
| DIN EN ISO 9038:2013-12 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| DIN EN ISO 20843:2011-04 | Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011) |
| DIN EN 14275:2013-05 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS |
| UNE-EN 1601:2018 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 4404-2:2011-03 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) |
| BS EN ISO 9029:1997 | Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method |
| ISO 8092-2:2005 | Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements |
| BS EN ISO 20847:2004 | Methods of test for petroleum and its products. BS 2000-496. Petroleum products. Determination of the sulfur content of automotive fuels. Energy-dispersive X-ray fluorescence spectrometry |
| ISO 4263-2:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 2: Procedure for category HFC hydraulic fluids |
| UNE-EN ISO 20846:2012 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
| BS EN ISO 14935:1999 | Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| UNE-EN ISO 20844:2016 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2015) |
| UNE-EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| I.S. EN ISO 14596:2007 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN ISO 9038:2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| I.S. EN ISO 8754:2003 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 15199-2:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| I.S. EN ISO 5164:2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
| I.S. EN ISO 13736:2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| I.S. EN 15199-1:2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 1: MIDDLE DISTILLATES AND LUBRICATING BASE OILS |
| DIN EN 12662:1998-10 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| EN 14112:2016 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| I.S. EN ISO 20843:2011 | CATEGORIESAND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC |
| I.S. EN 14105:2011 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS |
| UNI EN 14105 : 2011 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENTS |
| DIN ISO 15597:2006-01 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-503: DETERMINATION OF CHLORINE AND BROMINE CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN ISO 4404-2:2010 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 2: NON-AQUEOUS FLUIDS |
| I.S. EN 14275:2013 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS |
| I.S. EN ISO 8092-2:2006 | ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: DEFINITIONS, TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS |
| I.S. EN ISO 20783-1:2011 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF EMULSION STABILITY OF FIRE-RESISTANT FLUIDS - PART 1: FLUIDS IN CATEGORY HFAE |
| EN 15199-1:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils |
| EN 15199-3:2008 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| NF EN ISO 20884 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULPHUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN ISO 20844:2015 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE (ISO 20844:2015) |
| I.S. EN ISO 4263-3:2015 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING EHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015) |
| I.S. EN 14112:2016 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| EN 15199-2:2006 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| I.S. EN ISO 2719:2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| I.S. EN ISO 3679:2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
| EN 14105:2011 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents |
| DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS 3900-A8:1986 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Test for flash/no flash (closed cup equilibrium method) |
| ONORM EN 16091 : 2012 | LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| BS 3900-A13:1986 | Methods of test for paints Test for flash/no flash (rapid equilibrium method) |
| BS 3900-A9:1986 | Methods of test for paints Determination of flashpoint (closed cup equilibrium method) |
| BS 4726:1986 | Methods for sampling raw materials for paints and varnishes |
| BS 2000-16(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE FREEZING POINT OF AVIATION FUELS |
| BS EN 16576:2014 | Automotive fuels. Determination of manganese and iron content in diesel. Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| BS 2000-239(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-239: DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS) |
| UNI EN 15751 : 2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS EN 15199-3:2008 | Petroleum products. Determination of boiling range distribution by gas chromatography method Crude oil |
| 08/30176795 DC : DRAFT APR 2008 | BS EN 15779 - FATS AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES - DETERMINATION OF POLY-UNSATURATED FATTY ACID METHYL ESTERS BY GAS CHROMATOGRAPHY |
| EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
| BS ISO 10050:2005 | Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| 13/30280888 DC : 0 | BS EN ISO 4263-3 - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS |
| I.S. EN ISO 3680:2004 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 10/30216576 DC : 0 | BS EN 16091 - LIQUID PETROLEUM PRODUCTS - MIDDLE DISTILLATES AND FATTY ACID METHYL ESTER (FAME) FUELS AND BLENDS - DETERMINATION OF OXIDATION STABILITY BY RAPID SMALL SCALE OXIDATION METHOD |
| PD CEN/TR 15367-3:2009 | Petroleum products. Guide for good housekeeping Prevention of cross contamination |
| 14/30300905 DC : 0 | BS EN 16761-2 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| 07/30169525 DC : 0 | BS EN 15721 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| I.S. EN ISO 5163:2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
| 02/122315 DC : DRAFT MAY 2002 | ISO/DIS 20847 - PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT OF AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| 13/30282501 DC : 0 | BS EN 15195 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| BS 2000-309(2015) : 2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| 09/30199323 DC : 0 | BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL REQUIREMENTS AND TEST METHODS |
| 11/30197271 DC : DRAFT NOV 2011 | BS EN ISO 9038 - DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| ISO 9403:2000 | Crude petroleum Transfer accountability Guidelines for cargo inspection |
| DIN EN 15779:2013-12 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (<groesser |
| BS 2000-156(2007) : 2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| I.S. EN 16896:2016 | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| BS 2000-433(1999) : 1999 | PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE S-RAY FLUORESCENCE SPECTROMETRY (IDENTICAL WITH IP 433/1999) |
| BS 2000-600(2012) : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD (ISO 13032:2012) |
| BS ISO 13739:2010 | Petroleum products. Procedures for transfer of bunkers to vessels CD-ROM |
| DIN ISO 3733:2003-02 | PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS - DETERMINATION OF WATER - DISTILLATION METHOD |
| 08/30184585 DC : DRAFT JUNE 2008 | BS EN ISO 3924 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| UNI EN 15692 : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| 11/30251420 DC : 0 | BS EN 16329 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| 16/30339201 DC : 0 | BS EN 1601 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| BS EN 16761-2:2015 | Automotive fuels. Determination of methanol in automotive ethanol (E85) fuel by gas chromatography Method using heart cut technique |
| BS EN 16934:2017 | Automotive fuels and fat and oil derivates, Determination of steryl glycosides in fatty acid methyl esters (FAME). Method by GC-MS with prior purification by SPE |
| PREN 15488 : DRAFT 2006 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| UNI EN 15721 : 2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| 02/121972 DC : DRAFT APR 2002 | ISO/DIS 20844 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE |
| ISO 6615:1993 | Petroleum products Determination of carbon residue Conradson method |
| BS ISO 15169:2003 | Petroleum and liquid petroleum products. Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems |
| DIN EN 15751:2014-06 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS ISO 17308:2015 | Petroleum products and other liquids. Ethanol. Determination of electrical conductivity |
| I.S. EN 15199-4:2015 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| IP 615 : 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| DIN 51453:2004-10 | Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method |
| BS EN 16135:2011 | Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS) |
| BS 2000-489(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LOW LEAD CONTENTS IN GASOLINES - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY (XRF) |
| BS 2000-523(2015) : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS 2000-195(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS OF VOLATILE ORGANIC LIQUIDS |
| 14/30298209 DC : 0 | BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
| 15/30301302 DC : 0 | BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| 03/321614 DC : DRAFT DEC 2003 | PREN 14865-2 - RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| 11/30242687 DC : DRAFT APR 2011 | BS EN 16270 - AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS IN PETROL - GAS CHROMATOGRAPHIC METHOD |
| BIS IS 1448-30 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 30: CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD |
| 17/30341515 DC : 0 | BS ISO 12925-1 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY C (GEARS) - PART 1: SPECIFICATIONS FOR LUBRICANTS FOR ENCLOSED GEAR SYSTEMS |
| 06/30147345 DC : DRAFT MAR 2006 | EN 15484 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE - POTENTIOMETRIC METHOD |
| BS EN 15794:2009 | Determination of explosion points of flammable liquids |
| ISO 4268:2000 | Petroleum and liquid petroleum products Temperature measurements Manual methods |
| 16/30346963 DC : 0 | BS EN 17057 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF SATURATED MONOGLYCERIDES CONTENT IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-FID |
| 03/303313 DC : DRAFT APR 2003 | EN 14639 - CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS |
| XP ISO/TS 11366 : 2011 XP | PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
| 02/121969 DC : DRAFT APR 2002 | ISO/DIS 20623 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS) |
| 09/30185734 DC : 0 | BS EN 116/BS 2000-309 - DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT |
| 18/30358429 DC : DRAFT APR 2018 | BS EN ISO 3015 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF CLOUD POINT |
| 12/30266121 DC : 0 | BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| 06/30149412 DC : 0 | EN ISO 22854 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| 14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| BS EN 16144:2012 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method |
| BS 2000-4(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-4: DETERMINATION OF ASH |
| UNE-EN 16807:2017 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
| BS 2000-439(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCT - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD |
| BS 2000-131(1998) : 1998 | PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD |
| BS 2000-563(2011) : 2011 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| BS 2000-270(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF LEAD CONTENT OF GASOLINE - IODINE MONOCHLORIDE METHOD |
| PD ISO/TS 17307:2016 | Petroleum products. Biodiesel. Determination of total esters content by gas chromatography |
| 17/30359115 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| BS 2000-605(2013) : 2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| BS 2000-571(2013) : 2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| 10/30216579 DC : 0 | BS EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| BS EN 15492:2012 | Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method |
| BS EN 14865-1 : 2009 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| 16/30323482 DC : 0 | BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
| PREN 590 : DRAFT 2011 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| BIS IS 1448-9 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 9: DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| 14/30310326 DC : 0 | BS EN 15940 - AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| BS EN 14832:2005 | Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| ISO 3007:1999 | Petroleum products and crude petroleum — Determination of vapour pressure — Reid method |
| ISO 3987:2010 | Petroleum products — Determination of sulfated ash in lubricating oils and additives |
| DIN EN 16144:2012-05 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| UNE-EN 16761-1:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| BS 2000-553(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF SULFUR CONTENT - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| IP 498 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| ISO 20623:2017 | Petroleum and related products — Determination of the extreme-pressure and anti-wear properties of lubricants — Four-ball method (European conditions) |
| UNE-EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| I.S. EN 16761-2:2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| I.S. CWA 15145:2005 | AUTOMOTIVE FUELS - WATER IN DIESEL FUEL EMULSIONS FOR USE IN INTERNAL COMBUSTION ENGINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 3924:2016 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| UNE-EN 16734:2017 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
| I.S. EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 22854:2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN AUTOMOTIVE-MOTOR GASOLINE AND IN ETHANOL (E85) AUTOMOTIVE FUEL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD (ISO 22854:2016) |
| ISO/TS 17307:2016 | Petroleum products — Biodiesel — Determination of total esters content by gas chromatography |
| UNI CEN/TR 15367-3 : 2009 | PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION |
| I.S. EN 16997:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE SULFUR CONTENT IN ETHANOL (E85) AUTOMOTIVE FUEL - WAVELENGTH DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD |
| ISO 13739:2010 | Petroleum products Procedures for transfer of bunkers to vessels |
| EN 15692:2009 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method |
| BS 2000-79(2009) : 2009 COR 2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS 2000-428(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-428: LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF LOW LEAD CONCENTRATIONS BY ATOMIC ABSORPTION SPECTROMETRY |
| BS 2000-13(1994) : 1994 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - CONRADSON METHOD |
| BS 2000-556(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHODOUR EN GRAPHITE |
| BS 2000-576(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| BS 2000-74(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND BITUMINOUS MATERIALS - DETERMINATION OF WATER - DISTILLATION METHOD |
| I.S. EN ISO 16591:2010 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD |
| I.S. EN 15940:2016 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| EN ISO 20623:2018 | Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions) (ISO 20623:2017) |
| PD ISO/TS 15029-2:2012 | Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray test. Stabilized flame heat release method |
| EN 13016-1:2018 | Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) |
| BS 2000-447(2007) : 2007 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN 16761-1:2015 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| UNE-EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| I.S. EN 13016-1:2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) |
| ISO 11365:2017 | Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
| PREN 14078 : DRAFT 2013 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| EN ISO 5165:2018 | Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017) |
| EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| DIN EN 12916:2016-06 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| S.R. CEN/TR 17103:2017 | FAST PYROLYSIS BIO-OILS FOR STATIONARY INTERNAL COMBUSTION ENGINES - QUALITY DETERMINATION |
| IP 454 : 2015 | DETERMINATION OF PHOSPHORUS IN GASOLINE - SPECTROPHOTOMETRIC METHOD |
| EI HM 1 : 1999 | CALCULATION OF OIL QUANTITIES |
| UNI EN 16143 : 2013 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| PREN 17178 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE TOTAL VOLATILE SULFUR CONTENT IN LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE |
| DIN EN 16900:2015-09 (Draft) | FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| ONORM EN ISO 20884 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| ISO/TS 11365:2011 | Petroleum and related products Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
| EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| UNI EN 14214 : 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15490:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHE |
| ISO 8691:1994 | Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing |
| NF EN ISO 20846 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD |
| I.S. EN 15489:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD |
| ISO 12925-1:2018 | Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems |
| ISO 15597:2001 | Petroleum and related products — Determination of chlorine and bromine content — Wavelength-dispersive X-ray fluorescence spectrometry |
| I.S. EN 14538:2006 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTER (FAME) - DETERMINATION OF CA, K, MG AND NA CONTENT BY OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| I.S. EN 15492:2012 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD |
| DIN EN ISO 20783-2:2004-05 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003) |
| DIN EN ISO 4263-4:2006-05 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006) |
| DIN EN ISO 4263-3:2016-05 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS USING THE TOST TEST - PART 3: ANHYDROUS PROCEDURE FOR SYNTHETIC HYDRAULIC FLUIDS (ISO 4263-3:2015) |
| DIN EN ISO 4263-2:2003-10 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS; TOST TEST - PART 2: PROCEDURE FOR CLASS HFC HYDRAULIC FLUIDS |
| DIN EN ISO 3679:2015-06 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| UNE-EN ISO 20783-1:2011 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011) |
| DIN EN ISO 20884:2011-07 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| BS EN ISO 4263-3:2010 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Anhydrous procedure for synthetic hydraulic fluids |
| ISO 20783-2:2003 | Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 2: Fluids in category HFB |
| ISO 4260:1987 | Petroleum products and hydrocarbons Determination of sulfur content Wickbold combustion method |
| ISO 4404-2:2010 | Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 2: Non-aqueous fluids |
| ISO 15029-1:1999 | Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 1: Spray flame persistence — Hollow-cone nozzle method |
| BS EN ISO 3680:2004 | Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
| UNE-EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| BS EN 12634:1998 | Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method |
| CEN/TR 15367-1:2014 | Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels |
| UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method |
| BS EN ISO 5163:2014 | Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method |
| BS EN ISO 6245:2002 | Methods of test for petroleum and its products. BS 2000-4: Determination of ash |
| UNE-EN ISO 5163:2014 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) |
| BS EN ISO 8754:2003 | Petroleum products. Determination of sulfur content. Energy-dispersive X-ray fluorescence spectrometry |
| UNE-EN 116:2015 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method |
| UNE-EN 15944:2011 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| UNE-EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
| DIN EN 228:2017-08 | Automotive fuels - Unleaded petrol - Requirements and test methods; German version EN 228:2012+A1:2017 |
| ASTM D 8112 : 2017 | Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid |
| UNI EN ISO 12922 : 2013 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| ONORM EN 116 : 2015 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - STEPWISE COOLING BATH METHOD |
| EN 16906:2017 | Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method |
| EN 14833:2005 | Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| EN ISO 20783-2:2003 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003) |
| EN ISO 20823:2003 | Petroleum and related products - Determination of the flammability characteristics of fluids in contact with hot surfaces - Manifold ignition test (ISO 20823:2003) |
| EN ISO 8754:2003 | Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry (ISO 8754:2003) |
| EN 16576:2014 | Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN ISO 5164:2014 | Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) |
| EN ISO 9029:1995 | Crude petroleum - Determination of water - Distillation method (ISO 9029:1990) |
| EN ISO 14596:2007 | Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007) |
| UNI EN 15938 : 2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| UNI EN ISO 20843 : 2011 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF PH OF FIRE-RESISTANT FLUIDS WITHIN CATEGORIES HFAE, HFAS AND HFC |
| UNI EN 15195 : 2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| UNI EN 14078 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| UNI EN ISO 4404-2 : 2011 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 2: NON-AQUEOUS FLUIDS |
| UNI EN ISO 5163 : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
| UNI EN 14865-2 : 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| UNI EN 14275 : 2013 | AUTOMOTIVE FUELS - ASSESSMENT OF PETROL AND DIESEL FUEL QUALITY - SAMPLING FROM RETAIL SITE PUMPS AND COMMERCIAL SITE FUEL DISPENSERS |
| UNI EN 15944 : 2011 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| UNI EN 12662 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
| EN 16934:2017 | Automotive fuels and fat and oil derivates - Determination of steryl glycosides in fatty acid methyl esters (FAME) - Method by GC-MS with prior purification by SPE |
| UNI EN ISO 20783-1 : 2011 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF EMULSION STABILITY OF FIRE-RESISTANT FLUIDS - PART 1: FLUIDS IN CATEGORY HFAE |
| UNI EN ISO 5164 : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| DIN EN 16896:2015-09 (Draft) | PETROLEUM PRODUCTS AND RELATED PRODUCTS - DETERMINATION OF KINEMATIC VISCOSITY - METHOD BY STABINGER TYPE VISCOSIMETER |
| UNE-EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| DIN EN 16329:2013-07 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| 06/30147354 DC : DRAFT MAR 2006 | EN 15487 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD |
| BIS IS 1448-69 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 69: DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| PD CEN/TR 15367-2:2007 | Petroleum products. Guide for good housekeeping Automotive petrol fuels |
| DIN EN ISO 16591:2011-04 | Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) |
| DIN EN 16091:2012-02 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| UNI ISO 4263 : 2001 | PETROLEUM PRODUCTS - INHIBITED MINERAL OILS - DETERMINATION OF OXIDATION CHARACTERISTICS |
| BS 2000-409(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C |
| BS 2000-612(2013) : 2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS 2000-394(2001) : 2001 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) |
| BS 2000-236(2005) : 2005 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD |
| 15/30330667 DC : 0 | BS EN 16934 - AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTER (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| ICAO 9977 : 2012 | MANUAL ON CIVIL AVIATION JET FUEL SUPPLY |
| BS EN 15751:2014 | Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method |
| IP 434 : 98(R2004) | FREEZING POINT OF AVIATION TURBINE FUELS - AUTOMATED OPTICAL METHOD |
| DIN EN 16143:2013-05 | PETROLEUM PRODUCTS - DETERMINATION OF CONTENT OF BENZO(A)PYRENE (BAP) AND SELECTED POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS - PROCEDURE USING DOUBLE LC CLEANING AND GC/MS ANALYSIS |
| DIN EN 13016-1:2007-11 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT |
| BS EN ISO 13032:2012 | Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method |
| UNI EN 16476 : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| 12/30263877 DC : 0 | BS EN ISO 22854 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN AUTOMOTIVE-MOTOR GASOLINE - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| 06/30138176 DC : 0 | EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| UNI EN ISO 16591 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD |
| BS ISO 6245 : 2001 AMD 15249 | PETROLEUM PRODUCTS - DETERMINATION OF ASH |
| 14/30297823 DC : 0 | BS EN 15199-4 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 4: LIGHT FRACTIONS OF CRUDE OIL |
| BS ISO 8068:2006 | Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
| 09/30207063 DC : 0 | BS EN 14105 - FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF FREE AND TOTAL GLYCEROL AND MONO-, DI-, TRIGLYCERIDE CONTENT (REFERENCE METHOD) |
| ISO 3013:1997 | Petroleum products — Determination of the freezing point of aviation fuels |
| PD CEN/TR 15367-1:2014 | Petroleum products. Guidelines for good housekeeping Automotive diesel fuels |
| I.S. EN 15195:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| 14/30304453 DC : 0 | BS EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| DIN ISO 8691:2010-09 | Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing (ISO 8691:1994) |
| I.S. EN 13016-2:2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 2: DETERMINATION OF ABSOLUTE PRESSURE (AVP) BETWEEN 40 DEGREES C AND 100 DEGREES C |
| UNI EN 15837 : 2010 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS, COPPER AND SULFUR CONTENT - DIRECT METHOD BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| DIN 55680:1983-08 | PAINTS, VARNISHES AND RELATED PRODUCTS; FLASH/NO FLASH TEST; RAPID EQUILIBRIUM METHOD; ISO 3680 MODIFIED |
| 04/30113378 DC : DRAFT MAY 2004 | ISO 4263-4 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE AGEING BEHAVIOUR OF INHIBITED OILS AND FLUIDS - TOST TEST - PART 4: PROCEDURE FOR INDUSTRIAL GEAR OILS |
| 04/30113923 DC : DRAFT MAY 2004 | EN 12916 - PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| BS ISO 3007:1999 | Methods of test for petroleum and its products. BS 2000-69. Petroleum products. Determination of vapour pressure. Reid method |
| BS 3195-2:1989 | Methods for sampling petroleum products Automatic pipeline sampling of liquid hydrocarbons |
| CEN/TR 16557:2013 | Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determination |
| PREN 228 : DRAFT 2009 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
| BIS IS 1448-135 : 2013 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 135: CRUDE PETROLEUM - DETERMINATION OF WATER - DISTILLATION METHOD |
| BS EN 16896:2016 | Petroleum products and related products. Determination of kinematic viscosity. Method by Stabinger type viscosimeter |
| I.S. EN 15779:2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>=4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-539(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER COULOMETRIC TITRATION METHOD |
| 16/30325304 DC : 0 | BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| 01/206865 DC : DRAFT SEP 2001 | IEC 61221 ED.2 - PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
| BS ISO 13357-1:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for oils in the presence of water |
| 09/30205358 DC : 0 | BS EN ISO 20884 - PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| UNI EN 14865-1 : 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 1: METHOD TO TEST THE ABILITY TO LUBRICATE |
| 12/30261559 DC : 0 | BS ISO 5164 - PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| BS 2000-160(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-160: CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS - LABORATORY DETERMINATION OF DENSITY - HYDROMETER METHOD |
| BS 2000-34(2002) : 2002 AMD 15248 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| BS EN 15779 : 2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-620(2014) : 2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| DIN EN 16476:2014-07 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| 15/30316146 DC : 0 | BS ISO 13357-1 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
| DIN ISO 13357-1:2009-04 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
| PREN 14214 : DRAFT 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| DEFSTAN 91-91/8(2016) : 2016 | TURBINE FUEL, AVIATION KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| 09/30200031 DC : 0 | BS EN 15938 - AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| ISO 11223:2004 | Petroleum and liquid petroleum products — Direct static measurements — Measurement of content of vertical storage tanks by hydrostatic tank gauging |
| BS ISO 10307-1:2009 | Petroleum products. Total sediment in residual fuel oils Determination by hot filtration |
| ISO 6249:1999 | Petroleum products Determination of thermal oxidation stability of gas turbine fuels JFTOT method |
| PD ISO/TS 17306:2016 | Petroleum products. Biodiesel. Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography |
| BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| PREN 116 : DRAFT 2009 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT |
| BS EN 16568:2014 | Automotive fuels. Blends of Fatty acid methyl ester (FAME) with diesel fuel. Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| 16/30323964 DC : 0 | BS EN ISO 5165 - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| 17/30359794 DC : 0 | BS EN ISO 3924 - PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| 07/30164228 DC : 0 | BS EN 15691 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL DRY RESIDUE (INVOLATILE MATERIAL) - GRAVIMETRIC METHOD |
| 13/30285144 DC : 0 | BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| UNE-EN 16785-1:2016 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| 15/30326182 DC : 0 | BS EN 16906 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| BS EN 16807:2016 | Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants |
| 15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| EI HM 68 : 2011 | PROCEDURES FOR BULK LIQUID FATTY ACID METHYL ESTERS (FAME) AND BLENDED BIODIESEL CARGO INSPECTIONS |
| UNE-EN 16091:2012 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| BS ISO 15597:2001 | Methods of test for petroleum and its products. Determination of chlorine and bromine content. Wavelength-dispersive X-ray fluorescence spectrometry |
| BS 2000-358(1997) : 1997 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - DISTILLATION METHOD |
| 07/30166903 DC : DRAFT AUG 2007 | BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF CONTAMINATION IN MIDDLE DISTILLATES |
| 09/30167033 DC : 0 | |
| BS 2000-237(2005) : 2005 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD |
| BS 2000-170(2013) : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| BS 2000-36(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| UNI CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| ISO 28343:2010 | Rubber compounding ingredients Process oils Determination of glass transition temperature by DSC |
| UNE-EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| UNE-EN 15376:2015 | Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods |
| BS 2000-69(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-69 - PETROLEUM PRODUCTS - DETERMINATION OF VAPOUR PRESSURE - REID METHOD |
| DIN ISO 1516:1987-06 | PAINTS, VARNISHES, PETROLEUM AND RELATED PRODUCTS - FLASH/NO FLASH TEST - CLOSED CUP EQUILIBRIUM METHOD |
| BS 2000-123(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| DIN EN 16568:2015-03 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| BS 2000-413(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - LOW LEVELS OF VANADIUM IN LIQUID FUELS - DETERMINATION BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY AFTER ASHING |
| API MPM CH8.2 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8.2: STANDARD PRACTICE FOR AUTOMATIC SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS |
| UNI EN 15199-3 : 2008 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 3: CRUDE OIL |
| BS 2000-156(1997) : 1997 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| BS 2000-498(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| BS 2000-386(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - CRUDE PETROLEUM - DETERMINATION OF WATER - COULOMETRIC KARL FISCHER TITRATION METHOD |
| I.S. EN 16576:2014 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| S.R. CEN TS 15293:2011 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 13032:2012 | PETROLEUM PRODUCTS - DETERMINATION OF LOW CONCENTRATION OF SULFUR IN AUTOMOTIVE FUELS - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRIC METHOD (ISO 13032:2012) |
| I.S. EN ISO 20623:2018 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF LUBRICANTS - FOUR-BALL METHOD (EUROPEAN CONDITIONS) (ISO 20623:2017) |
| ISO 17308:2015 | Petroleum products and other liquids — Ethanol — Determination of electrical conductivity |
| ISO 3924:2016 | Petroleum products Determination of boiling range distribution Gas chromatography method |
| ISO 4261:2013 | Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications |
| EN 590:2013 | Automotive fuels - Diesel - Requirements and test methods |
| EN ISO 22854:2016 | Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2016) |
| I.S. EN 16807:2016 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
| I.S. EN 16715:2015 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS - IGNITION DELAY AND COMBUSTION DELAY DETERMINATION USING A CONSTANT VOLUME COMBUSTION CHAMBER WITH DIRECT FUEL INJECTION |
| I.S. EN ISO 2592:2017 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
| S.R. CEN/TR 16514:2013 | AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL |
| S.R. CWA 15940:2009 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| NF EN 238 : 1996 AMD 1 2005 | LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY |
| ISO/TS 15029-2:2012 | Petroleum and related products Determination of spray ignition characteristics of fire-resistant fluids Part 2: Spray test Stabilized flame heat release method |
| BS 2000-538(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF TOTAL ACIDITY - COLOUR INDICATOR TITRATION METHOD |
| ONORM EN ISO 9038 : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| PREN 1601 : DRAFT 2016 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| I.S. CEN/TR 14489:2005 | FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT |
| I.S. EN 15938:2010 | AUTOMOTIVE FUELS - ETHANOL BLENDING COMPONENT AND ETHANOL (E85) AUTOMOTIVE FUEL - DETERMINATION OF ELECTRICAL CONDUCTIVITY |
| API MPM CH17.9 SPANISH : 2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17 - MARINE MEASUREMENT - SECTION 9 - VESSEL EXPERIENCE FACTOR (VEF) |
| I.S. EN 16329:2013 | DIESEL AND DOMESTIC HEATING FUELS - DETERMINATION OF COLD FILTER PLUGGING POINT - LINEAR COOLING BATH METHOD |
| BS EN 13016-1:2007 | Liquid petroleum products. Vapour pressure Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) |
| BS 2000-408(2014) : 2014 COR 2014 | LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| BS 2000-394(2007) : 2007 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP) AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) |
| 17/30361216 DC : 0 | BS EN 14110 - FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| 16/30336428 DC : 0 | BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| CEN/TR 15367-2:2007 | Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels |
| BS EN ISO 3405:2011 | Petroleum products. Determination of distillation characteristics at atmospheric pressure |
| PREN 15293 : DRAFT 2016 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14214:2013 | Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods |
| BS 2000-41(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| ONORM EN ISO 13736 : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| BS 2000-409(2001) : 2001 | LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - DETERMINATION OF ABSOLUTE VAPOUR PRESSURE (AVP) BETWEEN 40 DEGREE C AND 100 DEGREE C |
| I.S. EN ISO 12156-1:2016 | DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
| ISO 10050:2005 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| DIN EN ISO 6246:2016-04 (Draft) | PETROLEUM PRODUCTS - GUM CONTENT OF FUELS - JET EVAPORATION METHOD (ISO 6246:2017) |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
| ISO 11158:2009 | Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG |
| ISO 10307-1:2009 | Petroleum products — Total sediment in residual fuel oils — Part 1: Determination by hot filtration |
| I.S. EN 15376:2014 | AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| I.S. CEN TR 15522-2:2006 | OIL SPILL IDENTIFICATION - WATERBORNE PETROLEUM AND PETROLEUM PRODUCTS - PART 2: ANALYTICAL METHODOLOGY AND INTERPRETATION OF RESULTS |
| I.S. EN 15944:2010 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY METHOD (ICP OES) |
| I.S. EN 15794:2009 | DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS |
| ONORM EN ISO 20846 : 2012 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011) |
| DIN EN ISO 14596:2007-12 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DIN EN ISO 13736:2013-08 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| UNE-EN ISO 20843:2011 | Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011) |
| DIN EN 14865-2:2011-01 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010) |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ISO 20847:2004 | Petroleum products — Determination of sulfur content of automotive fuels — Energy-dispersive X-ray fluorescence spectrometry |
| BS EN 15553:2007 | Petroleum products and related materials. Determination of hydrocarbon types. Fluorescent indicator adsorption method |
| UNE-EN ISO 12922:2013 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| BS EN ISO 12185:1996 | Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method |
| BS EN ISO 13736:2008 | Determination of flash point. Abel closed-cup method |
| BS EN ISO 20844:2015 | Petroleum and related products. Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
| BS EN ISO 3675:1998 | Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method |
| ISO 22854:2016 | Liquid petroleum products Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel Multidimensional gas chromatography method |
| BS EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| BS EN ISO 12205:1996 | Methods of test for petroleum and its products. Petroleum products. Determination of the oxidation stability of middle-distillate fuels |
| BS EN 15484:2007 | Ethanol as a blending component for petrol. Determination of inorganic chloride. Potentiometric method |
| ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
| ISO 9029:1990 | Crude petroleum — Determination of water — Distillation method |
| BS EN ISO 20764:2003 | Methods of test for petroleum and its products Petroleum and related products. Preparation of a test portion of high-boiling liquids for the determination of water content. Nitrogen purge method |
| ISO 20884:2011 | Petroleum products Determination of sulfur content of automotive fuels Wavelength-dispersive X-ray fluorescence spectrometry |
| BS EN ISO 20884:2011 | Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry |
| BS EN ISO 4263-2:2003 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for category HFC hydraulic fluids |
| BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
| BS EN ISO 3679:2015 | Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
| BS EN ISO 20763:2004 | Petroleum and related products. Determination of anti-wear properties of hydraulic fluids. Vane pump method |
| UNE-EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| EN ISO 14935:1998 | Petroleum and related products - Determination of wick flame persistence of fire-resistant fluids (ISO 14935:1998) |
| BS EN 15488:2007 | Ethanol as a blending component for petrol. Determination of copper content. Graphite furnace atomic absorption spectrometric method |
| BS EN ISO 20843:2011 | Petroleum and related products. Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC |
| ISO 20783-1:2011 | Petroleum and related products Determination of emulsion stability of fire-resistant fluids Part 1: Fluids in category HFAE |
| ISO 16591:2010 | Petroleum products Determination of sulfur content Oxidative microcoulometry method |
| BS EN 14833:2005 | Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| ISO 4263-1:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
| BS EN 15195:2014 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| BS EN 15486:2007 | Ethanol as a blending component for petrol. Determination of sulfur content. Ultraviolet fluorescence method |
| BS EN ISO 3171:1999 | Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling |
| ISO 13032:2012 | Petroleum products — Determination of low concentration of sulfur in automotive fuels — Energy-dispersive X-ray fluorescence spectrometric method |
| UNE-EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
| ISO 5163:2014 | Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method |
| ISO 6245:2001 | Petroleum products — Determination of ash |
| ISO 8754:2003 | Petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry |
| I.S. EN ISO 12922:2012 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| IEC 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| BS EN 15489:2007 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer coulometric titration method |
| BS EN 13016-2:2007 | Liquid petroleum products. Vapour pressure Determination of absolute vapour pressure (AVP) between 40°C and 100°C |
| ISO 4263-3:2015 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| UNE-EN ISO 5164:2014 | Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) |
| BS EN ISO 14597:1999 | Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry |
| ISO 14596:2007 | Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry |
| ISO 14935:1998 | Petroleum and related products Determination of wick flame persistence of fire-resistant fluids |
| ISO 20844:2015 | Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
| BS EN ISO 20846:2011 | Petroleum products. Determination of sulfur content of automotive fuels. Ultraviolet fluorescence method |
| DIN EN ISO 20844:2015-12 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE (ISO 20844:2015) |
| ISO 9038:2013 | Determination of sustained combustibility of liquids |
| ISO 20843:2011 | Petroleum and related products Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC |
| UNE-EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| ISO 1516:2002 | Determination of flash/no flash — Closed cup equilibrium method |
| BS EN ISO 4263-1:2004 | Petroleum and related products. Determination of the ageing behaviour of inhibited oils and fluids. TOST test Procedure for mineral oils |
| 08/30187368 DC : DRAFT JULY 2008 | BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
| ISO 3680:2004 | Determination of flash/no flash Rapid equilibrium closed cup method |
| ISO 20763:2004 | Petroleum and related products — Determination of anti-wear properties of hydraulic fluids — Vane pump method |
| ISO 3830:1993 | Petroleum products Determination of lead content of gasoline Iodine monochloride method |
| UNE-EN ISO 16591:2011 | Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) |
| BS EN 14112:2003 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of oxidation stability (accelerated oxidation test) |
| BS EN ISO 15029-1:2000 | Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray flame persistence. Hollow-cone nozzle method |
| BS EN ISO 20823:2003 | Petroleum and related products. Determination of the flammability characteristics of fluids in contact with hot surfaces. Manifold ignition test |
| BS EN ISO 3735:1999 | Crude petroleum and fuel oils. Determination of sediment. Extraction method |
| 08/30187364 DC : DRAFT JULY 2008 | BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
| DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
| BS EN ISO 2160:1998 | Petroleum products. Corrosiveness to copper. Copper strip test |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| ISO 20823:2003 | Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test |
| UNE-EN 15938:2011 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| BS EN 14275:2013 | Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers |
| ISO 14597:1997 | Petroleum products — Determination of vanadium and nickel content — Wavelength-dispersive X-ray fluorescence spectrometry |
| DIN EN 15553:2007-07 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| UNE-EN ISO 4404-2:2011 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) |
| UNE-EN ISO 2719:2017 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| BS EN 14105:2011 | Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of free and total glycerol and mono-, di-, triglyceride contents |
| BS EN ISO 8092-2:2005 | Road vehicles. Connections for on-board electrical wiring harnesses Definitions, test methods and general performance requirements |
| BS EN 15199-1:2006 | Petroleum products. Determination of boiling range distribution by gas chromatography method Middle distillates and lubricating base oils |
| UNE-EN 12916:2016 | Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection |
| ISO 12205:1995 | Petroleum products — Determination of the oxidation stability of middle-distillate fuels |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| UNE-EN 14275:2013 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
| DIN EN 15195:2015-02 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| CEN/TR 14489:2005 | Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
| DIN ISO 5275:2005-10 | Petroleum products and hydrocarbon solvents - Detection of thiols and other sulfur species - Doctor test (ISO 5275:2003) |
| DIN EN ISO 20763:2004-10 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004) |
| EN 15488:2007 | Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method |
| EN 16294:2012 | Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EN 16144:2012 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Fixed range injection period, constant volume combustion chamber method |
| EN ISO 1516:2002 | Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002) |
| EN 15489:2007 | Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method |
| EN 14865-1:2009+A1:2010 | Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
| EN ISO 3830:1995 | Petroleum products - Determination of lead content of gasoline - Iodine monochloride method (ISO 3830:1993) |
| EN 1601:2017 | Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID) |
| EN ISO 3735:1999 | Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999) |
| EN 16997:2017 | Liquid petroleum products - Determination of the sulfur content in Ethanol (E85) automotive fuel- Wavelength dispersive X-ray fluorescence spectrometric method |
| EN 16270:2015 | Automotive fuels - Determination of high-boiling components including fatty acid methyl esters in petrol and ethanol (E85) automotive fuel - Gas chromatographic method |
| EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
| EN 14078:2014 | Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method |
| EN 13723:2002 | Petroleum products - Determination of low lead contents in gasolines - Wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
| EN 15779:2009+A1:2013 | Petroleum products and fat and oil derivates - Fatty acid methyl esters (FAME) for diesel engines - Determination of polyunsaturated (≥4 double bonds) fatty acid methyl esters (PUFA) by gas chromatography |
| EN 15490:2007 | Ethanol as a blending component for petrol - Determination of pHe |
| EN 15486:2007 | Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method |
| EN ISO 15029-1:1999 | Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method (ISO 15029-1:1999) |
| EN 14517:2004 | Liquid petroleum products - Determination of hydrocarbon types and oxygenates in petrol - Multidimensional gas chromatography method |
| EN ISO 12205:1996 | Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995) |
| EN ISO 20763:2004 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004) |
| EN 14832:2005 | Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| EN 14538:2006 | Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EN 16329:2013 | Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method |
| EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| EN ISO 20844:2015 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO 20844:2015) |
| EN 15487:2007 | Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method |
| EN 15376:2014 | Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods |
| EN 15721:2013 | Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
| EN 15751:2014 | Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method |
| EN 16568:2014 | Automotive fuels - Blends of Fatty acid methyl ester (FAME) with diesel fuel - Determination of oxidation stability by rapidly accelerated oxidation method at 120 °C |
| EN 237:2004 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry |
| EN 15484:2007 | Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method |
| EN 15195:2014 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| EN 16761-1:2015 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 1: Method using single column technique |
| EN ISO 16591:2010 | Petroleum products - Determination of sulfur content - Oxidative microcoulometry method (ISO 16591:2010) |
| EN ISO 3924:2016 | Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2016) |
| EN 15938:2010 | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
| EN ISO 8092-2:2005 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005) |
| EN 15691:2009 | Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method |
| EN ISO 4404-2:2010 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) |
| EN ISO 20783-1:2011 | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2011) |
| EN 14275:2013 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
| EN 16136:2015 | Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method |
| EN ISO 4263-4:2006 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006) |
| EN ISO 20847:2004 | Petroleum products - Determination of sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry (ISO 20847:2004) |
| EN 16143:2013 | Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis |
| EN 16807:2016 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
| EN ISO 4263-1:2004 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1: Procedure for mineral oils (ISO 4263-1:2003) |
| EN 14522:2005 | Determination of the auto ignition temperature of gases and vapours |
| EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| EN ISO 14597:1999 | Petroleum products - Determination of vanadium and nickel content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14597:1997) |
| EN ISO 20846:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
| EN ISO 20843:2011 | Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2011) |
| EN 16091:2011 | Liquid petroleum products - Middle distillates and fatty acid methyl ester (FAME) fuels and blends - Determination of oxidation stability by rapid small scale oxidation method |
| EN 15944:2010 | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
| EN ISO 13032:2012 | Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012) |
| EN ISO 6246:2017 | Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017) |
| EN 14077:2003 | Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method |
| EI 1535 : 2016 | MINIMUM CRITERIA TO DETERMINE ACCEPTABILITY OF ADDITIVES FOR USE IN MULTI-PRODUCT PIPELINES CO-TRANSPORTING JET FUEL |
| EN ISO 3680:2004 | Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
| EN 15837:2009 | Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| EN 15485:2007 | Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| EN 14865-2:2006+A2:2010 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
| EN 16715:2015 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| EN 15492:2012 | Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method |
| EN ISO 20764:2003 | Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003) |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| EN 16761-2:2015 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique |
| EN 16135:2011 | Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS) |
| EN ISO 4263-3:2015 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015) |
| EN ISO 2160:1998 | Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998) |
| EN ISO 12937:2000 | Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000) |
| EN ISO 6245:2002 | Petroleum products - Determination of ash (ISO 6245:2001) |
| EN 15794:2009 | Determination of explosion points of flammable liquids |
| EN ISO 5163:2014 | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method (ISO 5163:2014) |
| EN ISO 4263-2:2003 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 2: Procedure for category HFC hydraulic fluids (ISO 4263-2:2003) |
| EN 16900:2017 | Fast pyrolysis bio-oils for industrial boilers - Requirements and test methods |
| EN 16476:2014 | Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| DIN EN 16270:2015-08 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| 09/30206695 DC : 0 | BS EN 15376 - AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS 2000-237(2014) : 2014 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS - RESEARCH METHOD (ISO 5164:2014) |
| BS 2000-138(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 138: DETERMINATION OF OXIDATION STABILITY OF AVIATION FUEL POTENTIAL RESIDUE METHOD |
| BS 2000-243(1994) : 1994 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND HYDROCARBONS - DETERMINATION OF SULFUR CONTENT - WICKBOLD COMBUSTION METHOD |
| 02/122677 DC : DRAFT JUN 2002 | ISO/DIS 20763 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF ANTI-WEAR PROPERTIES OF HYDRAULIC FLUIDS - VANE PUMP METHOD |
| PREN 14110 : DRAFT 2017 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF METHANOL CONTENT |
| BS 2000-507(2006) : 2006 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION BY GAS CHROMATOGRAPHY METHOD - PART 2: HEAVY DISTILLATES AND RESIDUAL FUELS |
| 12/30267087 DC : 0 | BS EN 16476 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOLD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP-OES) |
| DIN EN 14865-1:2011-01 | Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate (includes Amendment A1:2010) |
| DIN EN 16135:2012-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 15/30316149 DC : 0 | BS ISO 13357-2 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OIL |
| 14/30300902 DC : 0 | BS EN 16761-1 - AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 1: METHOD USING SINGLE COLUMN TECHNIQUE |
| BS EN 16294:2012 | Petroleum products and fat and oil derivatives. Determination of phosphorus content in fatty acid methyl esters (FAME). Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| PREN 12916 : DRAFT 2014 | PETROLEUM PRODUCTS - DETERMINATION OF AROMATIC HYDROCARBON TYPES IN MIDDLE DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| BS EN 16476:2014 | Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) |
| 14/30290117 DC : 0 | BS EN ISO 20844 - PETROLEUM PRODUCTS AND LUBRICANTS - DETERMINATION OF THE SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTOR NOZZLE - COMPLEMENTARY ELEMENT |
| ISO 10336:1997 | Crude petroleum — Determination of water — Potentiometric Karl Fischer titration method |
| BS 2000-14(1994) : 1994 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - RAMSBOTTOM METHOD |
| 09/30196077 DC : 0 | BS ISO 3405 - PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
| ISO 15169:2003 | Petroleum and liquid petroleum products Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems |
| UNE-EN 16294:2013 | Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| UNE-EN 15199-4:2015 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| BS ISO 11365:2017 | Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
| 08/30172824 DC : DRAFT JAN 2008 | BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS 2000-170(1995) : 1995 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| PREN 14112 : DRAFT 2014 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| BS 2000-510(2004) : 2004 | PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC HALOGEN CONTENT - OXIDATIVE MICROCOULOMETRIC METHOD |
| BS EN ISO 22854:2016 | Liquid petroleum products. Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel. Multidimensional gas chromatography method |
| I.S. EN 1601:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF ORGANIC OXYGENATE COMPOUNDS AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT IN UNLEADED PETROL - METHOD BY GAS CHROMATOGRAPHY (O-FID) |
| BS 2000-429(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 429: LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY |
| BS 2000-309(1998) : 1998 | DIESEL AND DOMESTIC HEATING FUELS. DETERMINATION OF COLD FILTER PLUGGING POINT |
| PD CEN/TR 15522-1:2006 | Oil spill identification. Waterborne petroleum and petroleum products Sampling |
| ISO 9114:1997 | Crude petroleum Determination of water content by hydride reaction Field method |
| DIN EN 16476 E : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| UNE-EN ISO 22854:2016 | Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO 22854:2016) |
| UNE-EN 16715:2016 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| DIN EN 16761-2:2016-02 | AUTOMOTIVE FUELS - DETERMINATION OF METHANOL IN AUTOMOTIVE ETHANOL (E85) FUEL BY GAS CHROMATOGRAPHY - PART 2: METHOD USING HEART CUT TECHNIQUE |
| 12/30268200 DC : 0 | BS EN 15751 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS ISO 15029-2:2018 | Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids Spray test. Stabilised flame heat release method |
| PD ISO/TR 11583:2012 | Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits |
| BS 2000-523(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-523: DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS 2000-313(2001) : 2001 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF AIR RELEASE OF LUBRICATING AND HYDRAULIC OILS |
| BS ISO 11158:2009 | Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG |
| PD CEN/TS 16640:2014 | Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method |
| 10/30228221 DC : 0 | BS EN 16135 - AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (AAS) |
| 17/30340314 DC : 0 | BS EN ISO 3405 - PETROLEUM AND RELATED PRODUCTS FROM NATURAL OR SYNTHETIC SOURCES - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| DIN EN 15837:2010-04 | Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES) |
| BS ISO/TR 13739:1998 | Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships |
| DIN ISO 13357-2:2008-09 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OILS |
| BS 2000-163(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - LUBRICATING OILS AND ADDITIVES - DETERMINATION OF SULFATED ASH |
| 07/30164620 DC : 0 | BS EN 15692 - ETHANOL AS A BLENDING COMPONENT FOR GASOLINE - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| BS 2000-582(2010) : 2010 | PETROLEUM PRODUCTS - DETERMINATION OF BOILING RANGE DISTRIBUTION - GAS CHROMATOGRAPHY METHOD |
| 16/30329930 DC : 0 | BS EN ISO 6246 - PETROLEUM PRODUCTS - GUM CONTENT OF LIGHT AND MIDDLE DISTILLATE FUELS - JET EVAPORATION METHOD |
| DIN EN 15376:2014-12 | AUTOMOTIVE FUELS - ETHANOL AS A BLENDING COMPONENT FOR PETROL - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 15940 : 2012 | AUTOMOTIVE FUELS - PARAFFINIC DIESEL FUEL FROM SYNTHESIS OR HYDROTREATMENT - REQUIREMENTS AND TEST METHODS |
| DIN EN 15199-3:2008-09 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3: Crude oil |
| 15/30310648 DC : 0 | BS ISO 15380 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HETG, HEPG, HEES AND HEPR |
| NF ISO 28343 : 2010 | |
| IP 41 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD |
| I.S. EN 16568:2014 | AUTOMOTIVE FUELS - BLENDS OF FATTY ACID METHYL ESTER (FAME) WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY RAPIDLY ACCELERATED OXIDATION METHOD AT 120 DEGREES C |
| DIN EN 16576:2015-02 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE AND IRON CONTENT IN DIESEL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| 16/30327612 DC : 0 | BS EN 13016-3 - LIQUID PETROLEUM PRODUCTS - VAPOUR PRESSURE - PART 3: DETERMINATION OF VAPOUR PRESSURE AND CALCULATED DRY VAPOUR PRESSURE EQUIVALENT (DVPE) (TRIPLE EXPANSION METHOD) |
| BS EN 16906:2017 | Liquid petroleum products. Determination of the ignition quality of diesel fuels. BASF engine method |
| 15/30325842 DC : 0 | BS EN 16900 - FAST PYROLYSIS BIO-OILS FOR INDUSTRIAL BOILERS - REQUIREMENTS AND TEST METHODS |
| BS EN 16091:2011 | Liquid petroleum products. Middle distillates and fatty acid methyl ester (FAME) fuels and blends. Determination of oxidation stability by rapid small scale oxidation method |
| DIN EN 16715:2015-10 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection |
| BS ISO 4261:2013 | Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications |
| UNI EN 16135 : 2012 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 16294 : 2013 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| BS 2000-589(2011) : 2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) METHOD |
| BS 2000-498(2014) : 2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF IGNITION DELAY AND DERIVED CETANE NUMBER (DCN) OF MIDDLE DISTILLATE FUELS BY COMBUSTION IN A CONSTANT VOLUME CHAMBER |
| I.S. EN 16270:2015 | AUTOMOTIVE FUELS - DETERMINATION OF HIGH-BOILING COMPONENTS INCLUDING FATTY ACID METHYL ESTERS IN PETROL AND ETHANOL (E85) AUTOMOTIVE FUEL - GAS CHROMATOGRAPHIC METHOD |
| BS EN 15692:2009 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method |
| 09/30201423 DC : 0 | BS EN 15944 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF NICKEL AND VANADIUM CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| BS ISO 19378:2003 | Lubricants, industrial oils and related products (class L). Machine-tool lubricants. Categories and specifications |
| BIS IS 1448-8 : 2012 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 8: DETERMINATION OF CARBON RESIDUE - RAMSBOTTOM METHOD |
| BS EN 15376:2014 | Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods |
| BS ISO 15380:2016 | Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR |
| BS EN 15721:2013 | Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method |
| IP 433 : 2015 | PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| BS EN 15691:2009 | Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method |
| I.S. EN 16476:2014 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF SODIUM, POTASSIUM, CALCIUM, PHOSPHORUS, COPPER AND ZINC CONTENTS IN DIESEL FUEL - METHOD VIA INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY (ICP OES) |
| 02/121971 DC : DRAFT APR 2002 | ISO/DIS 20764 - PETROLEUM AND RELATED PRODUCTS - PREPARATION OF A TEST PORTION OF HIGH-BOILING LIQUIDS FOR THE DETERMINATION OF WATER CONTENT - NITROGEN PURGE METHOD |
| OLF 085 : 2012 | RECOMMENDED GUIDELINES FOR SAMPLING AND ANALYSIS OF PRODUCED WATER |
| BS 2000-336(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-336: PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - ENERGY-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DIN EN 15199-4:2015-12 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 4: Light fractions of crude oil |
| BS 2000-143(1996) : 1996 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF ASPHALTENES (HEPTANE INSOLUBLES) IN CRUDE PETROLEUM AND PETROLEUM PRODUCTS |
| IP 383 : 1994(R2004) | APPARENT VISCOSITY OF MOTOR OILS BETWEEN -30 DEGREE C AND -5 DEGREE C - COLD CRANKING SIMULATOR METHOD |
| BS 2000-578(2009) : 2009 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| BS 2000-554(2007) : 2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF |
| BS 2000-433(1998) : 1998 | METHOD OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF VANADIUM AND NICKEL CONTENT - WAVE-LENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| UNE-EN ISO 13032:2012 | Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012) |
| BS EN ISO 12156-1:2016 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| I.S. EN 15721:2013 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD |
| S.R. CEN/TR 15367-1:2014 | PETROLEUM PRODUCTS - GUIDELINES FOR GOOD HOUSEKEEPING - PART 1: AUTOMOTIVE DIESEL FUELS |
| UNE-EN 16761-2:2016 | Automotive fuels - Determination of methanol in automotive ethanol (E85) fuel by gas chromatography - Part 2: Method using heart cut technique |
| I.S. EN 16135:2011 | AUTOMOTIVE FUELS - DETERMINATION OF MANGANESE CONTENT IN UNLEADED PETROL - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS 2000-373(2010) : 2010 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT - OXIDATIVE MICROCOULOMETRY METHOD |
| BS 2000-574(2009) : 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| BS 2000-408(1997) : 1997 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - LIQUID PETROLEUM PRODUCTS - UNLEADED PETROL - DETERMINATION OF ORGANIC OXYGENATE COMPOUND AND TOTAL ORGANICALLY BOUND OXYGEN CONTENT BY GAS CHROMATOGRAPHY (O-FID) |
| CEN/TR 15367-3:2009 | Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination |
| I.S. EN 16906:2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| BS 2000-163(2010) : 2010 | PETROLEUM PRODUCTS - DETERMINATION OF SULFATED ASH IN LUBRICATING OILS AND ADDITIVES |
| BS 2000-342(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF THIOL (MERCAPTAN) SULFUR IN LIGHT AND MIDDLE DISTILLATE FUELS - POTENTIOMETRIC METHOD |
| API MPMS CH17.11 SPANISH : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.11: MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT |
| I.S. EN 238:1996 | LIQUID PETROLEUM PRODUCTS - PETROL - DETERMINATION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY |
| BIS IS 1448-21 : 2012 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 21: DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| I.S. EN 16294:2012 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATIVES - DETERMINATION OF PHOSPHORUS CONTENT IN FATTY ACID METHYL ESTERS (FAME) - OPTICAL EMISSION SPECTRAL ANALYSIS WITH INDUCTIVELY COUPLED PLASMA (ICP OES) |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| IP PM CW : 2004 | DETERMINATION OF LOW LEVEL METALLIC ELEMENTS IN VACUUM GAS OIL/WAXY DISTILLATES AND CRUDE OILS - FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY (AAS) OR INDUCTIVELY COUPLED PLASMA-EMISSION SPECTROPHOTOMETRY (ICP-ES) METHOD |
| I.S. EN 590:2013+A1:2017&LC:2017 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| NF ISO 10336 : 1998 | CRUDE PETROLEUM - DETERMINATION OF WATER - POTENTIOMETRIC KARL FISCHER TITRATION METHOD |
| ISO 15029-2:2018 | Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilised flame heat release method |
| PREN 17155 : DRAFT 2017 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
| ISO/TR 9038:1991 | Paints and varnishes Determination of the ability of liquid paints to sustain combustion |
| DIN EN 16709:2015-12 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
| NF EN ISO 3405 : 2011 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| 17/30360226 DC : 0 | BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER |
| BS EN 590 : 2013 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
| IP 227 : 1999 | DETERMINATION OF CORROSIVENESS TO SILVER OF AVIATION TURBINE FUELS - SILVER STRIP METHOD |
| DIN EN 16906:2015-09 (Draft) | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - BASF ENGINE METHOD |
| BS 2000-572(2009) : 2009 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD |
| DIN EN 16934:2015-12 (Draft) | AUTOMOTIVE FUELS AND FAT AND OIL DERIVATES - DETERMINATION OF STERYL GLYCOSIDES IN FATTY ACID METHYL ESTERS (FAME) - METHOD BY GC-MS WITH PRIOR PURIFICATION BY SPE |
| EN 13016-3:2018 | Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method) |
| IP 578 : 2015 | PETROLEUM PRODUCTS AND FAT AND OIL DERIVATES - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - DETERMINATION OF POLYUNSATURATED (>= 4 DOUBLE BONDS) FATTY ACID METHYL ESTERS (PUFA) BY GAS CHROMATOGRAPHY |
| UNE-EN 15940:2016 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| ISO 15380:2016 | Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR |
| I.S. EN 14832:2005 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE OXIDATION STABILITY AND CORROSIVITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
| ISO 8068:2006 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
| UNE-EN 16709:2016 | Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods |
| I.S. EN ISO 5165:1998 | PETROLEUM PRODUCTS - DETERMINATION OF THE IGNITION QUALITY OF DIESEL FUELS - CETANE ENGINE METHOD (ISO 5165:2017) |
| ISO/TS 17306:2016 | Petroleum products — Biodiesel — Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography |
| I.S. EN 15751:2014 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTER (FAME) FUEL AND BLENDS WITH DIESEL FUEL - DETERMINATION OF OXIDATION STABILITY BY ACCELERATED OXIDATION METHOD |
| DIN EN ISO 3405:2011-04 | PETROLEUM PRODUCTS - DETERMINATION OF DISTILLATION CHARACTERISTICS AT ATMOSPHERIC PRESSURE |
| ISO/TS 11366:2011 | Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| I.S. CWA 15293:2005 | AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS |
| ISO/TR 11583:2012 | Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits |
| I.S. EN 15488:2007 | ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF COPPER CONTENT - GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| I.S. EN 15553:2007 | PETROLEUM PRODUCTS AND RELATED MATERIALS - DETERMINATION OF HYDROCARBON TYPES - FLUORESCENT INDICATOR ADSORPTION METHOD |
| ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| ISO 6246:2017 | Petroleum products — Gum content of fuels — Jet evaporation method |
| DIN EN 14078:2014-09 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| BS EN ISO 1523:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
| DIN EN ISO 20846:2012-01 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011) |
| UNE-EN ISO 4263-3:2016 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO 4263-3:2015) |
| ISO 20764:2003 | Petroleum and related products — Preparation of a test portion of high-boiling liquids for the determination of water content — Nitrogen purge method |
| BS EN 24260:1994 | Methods of test for petroleum and its products. Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method |
| BS EN 237:2004 | Methods of test for petroleum and its products BS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry |
| DD ISO/TS 11366:2011 | Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| UNE-EN 590:2014 | Automotive fuels - Diesel - Requirements and test methods |
| UNE-EN 14112:2017 | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test) |
| BS EN 14331:2004 | Liquid petroleum products. Separation and characterisation of fatty acid methyl esters (FAME) from middle distillates. Liquid chromatography (LC)/gas chromatography (GC) method |
| BS EN 238:1996 | Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry |
| BS EN 116:2015 | Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method |
| BS EN 14865-2 : 2006 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| BS EN 13132:2000 | Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching |
| BS EN 12953-11:2003 | Shell boilers Acceptance tests |
| BS EN ISO 3830:1996 | Petroleum products. Determination of lead content of gasoline. Iodine monochloride method |
| BS EN ISO 14596:2007 | Petroleum products. Determination of sulfur content. Wavelength-dispersive X-ray fluorescence spectrometry |
| BS EN 12177:2000 | Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography |
| BS EN 1601:2017 | Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID) |
| BS EN 12766-1:2000 | Methods of test for petroleum and its products. Petroleum products and used oils. Determination of PCBs and related products Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| BS EN 13723:2002 | Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
| BS EN ISO 1516:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
| ISO 4263-4:2006 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 4: Procedure for industrial gear oils |
| ISO 20846:2011 | Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
| CEN/TS 15293:2011 | Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods |
| CEN/TR 17103:2017 | Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion engines - Quality determination |
| DIN EN 15491:2007-11 | Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method |
| DIN EN 237:2004-12 | Liquid petroleum products - Petrol - Determination of low lead concentrations by atomic absorption spectrometry; German version EN 237:2004 |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| DIN EN ISO 6245:2003-01 | PETROLEUM PRODUCTS - DETERMINATION OF ASH |
| DIN EN 14214:2003-11 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| EN 15553:2007 | Petroleum products and related materials - Determination of hydrocarbon types - Fluorescent indicator adsorption method |
| DIN EN 14517:2004-12 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-256: LIQUID PETROLEUM PRODUCTS - DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN PETROL - MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD |
| DIN EN ISO 20764:2004-02 | Petroleum and related products - Preparation of a test portion of high-boiling liquids for the determination of water content - Nitrogen purge method (ISO 20764:2003) |
| DIN EN 15486:2007-11 | Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method |
| DIN EN 14833:2005-09 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE HYDROLYTIC STABILITY OF FIRE-RESISTANT PHOSPHATE ESTER FLUIDS |
| DIN EN ISO 3680:2004-07 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| DIN EN 15487:2007-11 | Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method |
| DIN EN 16896:2017-02 | Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscosimeter |
| CEN/TR 16514:2013 | Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods, and requirements for E10+ petrol |
| CEN/TR 15522-1:2006 | Oil spill identification - Waterborne petroleum and petroleum products - Part 1: Sampling |
| CEN/TS 15940:2012 | Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods |
| DIN EN 14522:2005-12 | Determination of the auto ignition temperature of gases and vapours |
| DIN EN ISO 15029-1:2002-10 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF SPRAY IGNITION CHARACTERISTICS OF FIRE-RESISTANT FLUIDS - PART 1: SPRAY FLAME PERSISTENCE - HOLLOW-CONE NOZZLE METHOD |
| EN 15491:2007 | Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method |
| DIN EN 15199-2:2007-01 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuels |
| DIN EN ISO 20823:2003-10 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE FLAMMABILITY CHARACTERISTICS OF FLUIDS IN CONTACT WITH HOT SURFACES - MANIFOLD IGNITION TEST |
| DIN EN 14078:2004-03 | LIQUID PETROLEUM PRODUCTS - DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN MIDDLE DISTILLATES - INFRARED SPECTROMETRY METHOD |
| DIN EN 14538:2006-09 | Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| EN 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| DIN EN ISO 5163:2014-10 | PETROLEUM PRODUCTS - DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS - MOTOR METHOD (ISO 5163:2014) |
| I.S. EN ISO 12185:1997 | CRUDE PETROLEUM AND PETROLEUM PRODUCTS - DETERMINATION OF DENSITY - OSCILLATING U-TUBE METHOD |
| UNE-EN 228:2013 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| ASTM D 7500 : 2015 : R2019 | Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography |
| NBR ISO 20844 : 2010 | PETROLEUM PRODUCTS - DETERMINATION OF SHEAR STABILITY OF POLYMER-CONTAINING OILS USING A DIESEL INJECTION NOZZLE |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 10715:1997 | Natural gas — Sampling guidelines |
| ISO 3165:1976 | Sampling of chemical products for industrial use — Safety in sampling |
| ISO 8943:2007 | Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods |
| ISO 3007:1999 | Petroleum products and crude petroleum — Determination of vapour pressure — Reid method |
| ISO 3735:1999 | Crude petroleum and fuel oils Determination of sediment Extraction method |
| IEC 60475:2011 | Method of sampling insulating liquids |
| ISO 3734:1997 | Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method |
| ISO 4257:2001 | Liquefied petroleum gases Method of sampling |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ISO 10336:1997 | Crude petroleum — Determination of water — Potentiometric Karl Fischer titration method |
| ISO 10337:1997 | Crude petroleum — Determination of water — Coulometric Karl Fischer titration method |
| ISO 9029:1990 | Crude petroleum — Determination of water — Distillation method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.