ISO 22968:2010
Current
The latest, up-to-date edition.
Forced draught oil burners
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
10-19-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 22968:2010 specifies the terminology, test procedures and general requirements for the construction and operation of automatic forced draught oil burners supplied with a fuel having a viscosity at the burner inlet of 1,6 mm2/s (cSt) to 6 mm2/s (cSt) at 20 C or higher, boiling petroleum in accordance with ISO 8217-based first raffinates, and the provision of related control and safety devices.
It is applicable to automatic oil burners fitted with a combustion air fan, equipped as described therein, and intended for use in appliances of different types and operated with fuel oils, single burners with a single combustion chamber, singlefuel and dualfuel burners when operating only on oil, and the oil function of dual-fuel burners designed for simultaneous operation on gaseous and liquid fuels (for the former operation, see also ISO 22967).
It is not applicable to burners used in direct fired processes either with defined combustion chamber applications or where the combustion chamber wall surface temperature is greater than 750 C or the heat transfer medium temperature is greater than 500 C.
| DevelopmentNote |
Supersedes ISO/DIS 22968. (10/2010)
|
| DocumentType |
Standard
|
| Pages |
76
|
| ProductNote |
This standard refers to : JIS B 2351-1,JIS H 3401,KS B ISO 8434-1.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| PN-EN 267:2020-06 | Identical |
| BS ISO 22968:2010 | Identical |
| UNE-EN 60730-2-6:2016 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| BS ISO 13577-3:2016 | Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases |
| CAN/CSA-E60730-2-6:17 | Automatic electrical controls — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements (Adopted IEC 60730-2-6:2015, third edition, 2015-04, with Canadian deviations) |
| 13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
| 14/30283312 DC : 0 | BS ISO 13577-3 - INDUSTRIAL FURNACE AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 3: GENERATION AND USE OF PROTECTIVE AND REACTIVE ATMOSPHERE GASES |
| 17/30355404 DC : 0 | BS IEC 62885-5 ED.1.0 - SURFACE CLEANING APPLIANCES - PART 5: HIGH PRESSURE CLEANERS AND STEAM CLEANERS - METHODS OF MEASURING THE PERFORMANCE |
| BS ISO 22967:2010 | Forced draught gas burners |
| IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
| IEC 60730-2-6:2015 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| EN 60730-2-6:2016 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| ISO 22967:2010 | Forced draught gas burners |
| ISO 13577-3:2016 | Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases |
| BS EN 60730-2-6:2016 | Automatic electrical controls Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| I.S. EN 60730-2-6:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 2-6: PARTICULAR REQUIREMENTS FOR AUTOMATIC ELECTRICAL PRESSURE SENSING CONTROLS INCLUDING MECHANICAL REQUIREMENTS |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| AS 2593:2021 | Boilers - Safety management and supervision systems |
| ISO 1129:1980 | Steel tubes for boilers, superheaters and heat exchangers Dimensions, tolerances and conventional masses per unit length |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 9329-1:1989 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| IEC 61810-1:2015 | Electromechanical elementary relays - Part 1: General and safety requirements |
| IEC 60747-5-2:1997+AMD1:2002 CSV | Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics |
| ISO 8217:2017 | Petroleum products — Fuels (class F) — Specifications of marine fuels |
| ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 14532:2014 | Natural gas — Vocabulary |
| ISO 23552-1:2007 | Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 9330-1:1990 | Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties |
| IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners — Specification |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 23550:2011 | Safety and control devices for gas burners and gas-burning appliances General requirements |
| ISO 22967:2010 | Forced draught gas burners |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.