ISO 2178:2016
Current
Current
The latest, up-to-date edition.
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
03-17-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 2178:2016 specifies a method for non-destructive measurements of the thickness of non-magnetizable coatings on magnetizable base metals.
The measurements are tactile and non-destructive on typical coatings. The probe or an instrument with integrated probe is placed directly on the coating to be measured. The coating thickness is displayed on the instrument.
In ISO 2178:2016 the term "coating" is used for material such as, for example, paints and varnishes, electroplated coatings, enamel coatings, plastic coatings, powder coatings, claddings.
NOTE This method can also be applied to the measurement of magnetizable coatings on non-magnetizable base metals or other materials (see ISO 2361).
| DevelopmentNote |
Supersedes ISO/DIS 2178. (03/2016)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 2178 : 2016 | Identical |
| NEN EN ISO 2178 : 2016 | Identical |
| NS EN ISO 2178 : 1995 | Identical |
| I.S. EN ISO 2178:2016 | Identical |
| PN EN ISO 2178 : 2016 | Identical |
| SN EN ISO 2178 : 1995 | Identical |
| UNI EN ISO 2178 : 1998 | Identical |
| SS-EN ISO 2178: 2016 | Identical |
| SN EN ISO 2178:2016 | Identical |
| UNI EN ISO 2178:2016 | Identical |
| UNE-EN ISO 2178:2017 | Identical |
| BS EN ISO 2178:2016 | Identical |
| EN ISO 2178:2016 | Identical |
| NF EN ISO 2178 : 2016 | Identical |
| DIN EN ISO 2178:2015-01 (Draft) | Identical |
| SAC GB/T 4956 : 2003 | Identical |
| DIN EN ISO 2178:1995-04 | Identical |
| SNV ISO 2178 : 1982 | Identical |
| UNI ISO 2178 : 1987 | Identical |
| BS 5411-11(1984) : 1984 AMD 8482 | Identical |
| CSA E60335.2.55 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
| BS ISO 9364:2017 | Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
| BS ISO 15208:2012 | Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality |
| 10/30207371 DC : 0 | BS ISO 4998 - CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF STRUCTURAL QUALITY |
| BS ISO 12301:2007 | Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics |
| 07/30169136 DC : 0 | BS ISO 28763 - VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| NF EN ISO 6158 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
| 10/30231978 DC : 0 | BS EN ISO 28721-1 - VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 1: QUALITY REQUIREMENTS FOR APPARATUS, COMPONENTS, APPLIANCES AND ACCESSORIES |
| BS IEC 60076-15:2015 | Power transformers Gas-filled power transformers |
| CSA C22.2 No. 60745.2.12 : 2005 : INC : AMD 1 : 2008 : R2014 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR CONCRETE VIBRATORS |
| UNI EN ISO 4521 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| 15/30329701 DC : 0 | BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| 16/30332792 DC : DRAFT APR 2016 | BS EN ISO 2360 - NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| 14/30273517 DC : 0 | BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS |
| BS EN 2535:2011 | Aerospace series. Vacuum deposition of cadmium |
| HD 633 S1:1997 | Tests on oil-filled (fluid filled), paper- or polypropylene paper laminate-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV) |
| 13/30280536 DC : 0 | BS ISO 4998 - CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF STRUCTURAL QUALITY |
| GOST R IEC 60745-1 : 2005 ERRATA 2007 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY AND METHODS OF TESTING - PART 1: GENERAL REQUIREMENTS |
| 07/30169024 DC : 0 | BS ISO 28762 - VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| BS EN 60168:1995 | Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000V |
| 17/30344317 DC : 0 | BS ISO 49 AMENDMENT 1 - MALLEABLE CAST IRON FITTINGS THREADED TO ISO 7-1 |
| I.S. EN ISO 2746:2015 | VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST (ISO/FDIS 2746:2015) |
| NF EN ISO 28721-1 : 2011 | VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 1: QUALITY REQUIREMENTS FOR APPARATUS, COMPONENTS, APPLIANCES AND ACCESSORIES |
| 10/30207383 DC : 0 | BS ISO 14788 - CONTINUOUS HOT-DIP ZINC-5% ALUMINIUM ALLOY COATED STEEL SHEET |
| 93/706720 DC : 0 | PREN 2535 - AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| PREN ISO 28763 : DRAFT 2010 | VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| 02/123296 DC : DRAFT SEP 2002 | BS EN ISO 2063 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| BS EN 60335-2-71:2003 | Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals |
| 07/30169151 DC : 0 | BS ISO 28765 - VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES |
| 05/30130018 DC : DRAFT FEB 2005 | EN 15159-1 - VITREOUS AND PORCELAIN ENAMELS - GLASS LINED APPARATUS FOR PROCESS PLANTS - PART 1: TECHNICAL DELIVERY CONDITIONS |
| 98/105109 DC : DRAFT JUNE 1998 | PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY |
| UNE-EN ISO 4528:2015 | Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2015) |
| BS ISO 4528 : 2000 | VITREOUS AND PORCELAIN ENAMEL FINISHES - SELECTION OF TEST METHODS FOR VITREOUS AND PORCELAIN ENAMELLED AREAS OF ARTICLES |
| CEI EN 61537 : 2007 | CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS |
| CSA C1325 : 1999 : R2016 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| 97/700600 DC : DRAFT JAN 1997 | PREN 3839 - AEROSPACE SERIES - ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL |
| I.S. EN 2535:2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| CSA C62155 : 2006 : R2015 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| CSA E60335.2.23 : 2005 : R2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE |
| CEI EN 61325 : 1998 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| I.S. EN 50144-1:1998 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60335-2-28:2003/A11:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES |
| I.S. EN ISO 6158:2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
| I.S. EN 60335-2-23:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE |
| I.S. EN 61325:1997 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| I.S. EN ISO 2360:2017 | NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
| EN ISO 2819:2018 | Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:2017) |
| BS EN ISO 6158:2011 | Metallic and other inorganic coatings. Electrodeposited coatings of chromium for engineering purposes |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ISO 6158:2011 | Metallic and other inorganic coatings Electrodeposited coatings of chromium for engineering purposes |
| BS EN ISO 2063-1:2017 | Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems |
| UNE-EN ISO 2081:2010 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2008) |
| BS EN ISO 2081:2018 | Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel |
| ASTM B 499 : 2009 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
| NF EN 50164-2 : 2008 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| BS EN 60335-2-12 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| ASTM F 2919/F2919M : 2012 : R2018 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.<sup>2</sup > [3871 mm<sup>2</sup>] in Panels |
| DIN EN ISO 2081:2016-04 (Draft) | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| IEC 60745-2-20:2003+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws |
| IEC 60335-2-104:2003 | Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| I.S. EN ISO 2808:2007 | PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 14430:2004 | Vitreous and porcelain enamels. High voltage test |
| IEC 60383-1:1993 | Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria |
| BS EN 14864:2005 | Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification |
| BS EN 15159-1:2006 | Vitreous and porcelain enamels. Glass-lined apparatus for process plants Quality requirements for apparatus, components, appliances and accessories |
| BS EN ISO 2808:2007 | Paints and varnishes. Determination of film thickness |
| BS EN 22063:1994 | Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys |
| UNE-EN 10106:2016 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| UNE-EN ISO 28765:2016 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
| IEC 60335-2-32:2002+AMD1:2008+AMD2:2013 CSV | Household and similar electrical appliances - Safety - Part 2-32:Particular requirements for massage appliances |
| IEC 60335-2-78:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues |
| EN 2133:2010 | Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys |
| I.S. EN 10106:2015 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL SHEET AND STRIP DELIVERED IN THE FULLY PROCESSED STATE |
| EN 60335-2-99:2003 | Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
| DIN EN 14866:2006-03 | VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| EN 62561-2:2012 | Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes |
| I.S. EN 10242:1995 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| EN 60383-1:1996/A11:1999 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| EN 1071-10:2009 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
| EN 60335-2-39:2003/A2:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS |
| EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| DIN EN 13523-1:2017-05 | Coil coated metals - Test methods - Part 1: Film thickness |
| EN ISO 2082:2017 | Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017) |
| EN 60335-2-84:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS |
| EN 60335-2-38:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS |
| DIN EN ISO 11177:2016-10 | VITREOUS AND PORCELAIN ENAMELS - INSIDE AND OUTSIDE ENAMELLED VALVES AND PRESSURE PIPE FITTINGS FOR UNTREATED AND POTABLE WATER SUPPLY - QUALITY REQUIREMENTS AND TESTING (ISO 11177:2016) |
| EN 60335-2-12 : 2003 AMD 1 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| EN 12330 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
| EN 13438:2013 | Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| DIN EN ISO 4527:2003-10 | METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 04/30114374 DC : DRAFT JUN 2004 | ISO 3575 - CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
| 08/30185924 DC : 0 | BS EN 1071-10 - ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
| I.S. EN 14866:2006 | VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| I.S. EN 12330:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
| I.S. EN ISO 13123:2011 | METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT (ISO 13123:2011) |
| I.S. EN 14430:2004 | VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST |
| I.S. EN 12329:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| ISO 15726:2009 | Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron |
| UNE-EN ISO 19598:2017 | Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016) |
| BS EN ISO 2082:2017 | Metallic and other inorganic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| I.S. EN 15159-1:2006 | VITREOUS AND PORCELAIN ENAMELS - GLASS LINED APPARATUS FOR PROCESS PLANTS - PART 1: QUALITY REQUIREMENTS FOR APPARATUS, COMPONENTS, APPLIANCES AND ACCESSORIES |
| BS EN ISO 9717:2017 | Metallic and other inorganic coatings. Phosphate conversion coating of metals |
| 03/317246 DC : 0 | ISO 2081 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| BS ISO 14788:2017 | Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
| 03/321258 DC : 0 | ISO/DIS 2082 - METALLIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| 15/30334742 DC : 0 | BS EN 60404-8-8 ED 2.0 - MAGNETIC MATERIALS - PART 8-8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - THIN ELECTRICAL STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| 06/30145675 DC : DRAFT SEP 2006 | ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS |
| 17/30334103 DC : 0 | BS ISO 9364 - CONTINUOUS HOT-DIP 55% ALUMINIUM/ZINC ALLOY-COATED STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
| BS EN ISO 2746:2015 | Vitreous and porcelain enamels. High voltage test |
| EN 60168:1994/A2:2000 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1KV |
| CEI EN 62155 : 2004 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| UNI EN ISO 13123 : 2012 | METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT |
| 07/30166781 DC : 0 | BS EN 50164-2 AMD 2 - LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| NF EN 62155 : 2003 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| 08/30173308 DC : DRAFT MAY 2008 | BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| 10/30231990 DC : 0 | BS EN ISO 28722 - VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE |
| 07/30171995 DC : 0 | BS ISO 15726 - ELECTRODEPOSITED COATINGS AND RELATED FINISHES - ELECTROPLATED ZINC ALLOYS WITH NICKEL, COBALT OR IRON |
| 17/30357669 DC : 0 | BS ISO 16172 - STEEL SHEET, METALLIC-COATED BY THE CONTINUOUS HOT-DIP PROCESS FOR CORRUGATED STEEL PIPE |
| BS EN 60335-2-91:2003 | Specification for safety of household and similar electrical appliances Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| 01/714180 DC : DRAFT OCT 2001 | BS ISO 14657 - ZINC-COATED STEEL FOR THE REINFORCEMENT OF CONCRETE |
| 03/321261 DC : DRAFT DEC 2003 | PREN 14864 - VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| BS EN 61537:2007 | Cable management. Cable tray systems and cable ladder systems |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| CSA C62155:2006 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| DIN EN ISO 28765:2016-10 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
| CEI EN 62561-2 : 2013 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| BS EN ISO 4521:2008 | Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods |
| I.S. EN 62561-2:2012 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES (IEC 62561-2:2012 (MOD)) |
| NF EN ISO 28762 : 2011 | VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| I.S. EN ISO 2081:2018 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2081:2018) |
| PREN 2535 : 200P1 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| I.S. CEN TS 1071-10:2004 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
| I.S. EN 60335-2-47:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002 (EQV)) |
| BS EN 50144-1:1999 | Safety of hand-held electric motor operated tools General requirements |
| BS EN 60335-2-88:2002 | Specification for safety of household and similar electrical appliances. Particular requirements Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| I.S. EN 50144-2-13:2002 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS |
| ISO 9364:2017 | Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
| I.S. EN 60335-2-81:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV)) |
| I.S. HD 632:2016 | POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 36 KV (U[M] = 42 KV) UP TO 150 KV (U[M] = 170 KV) |
| I.S. EN 60335-2-9:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES (IEC 60335-2-9:2002 (MOD)) |
| CSA C22.2 No. 60745.2.12 : 2005 : INC : AMD 1 : 2008 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR CONCRETE VIBRATORS |
| PREN 10348-2 : DRAFT 2016 | STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS |
| ISO 9717:2017 | Metallic and other inorganic coatings — Phosphate conversion coating of metals |
| ISO 12301:2007 | Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
| I.S. EN ISO 4528:2015 | VITREOUS AND PORCELAIN ENAMEL FINISHES - GUIDE TO SELECTION OF TEST METHODS FOR VITREOUS AND PORCELAIN ENAMELLED AREAS OF ARTICLES (ISO 4528:2015) |
| I.S. EN 50164-2:2008 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| ONORM EN ISO 6158 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
| EN 60335-2-74:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS |
| I.S. EN 60335-2-86:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-86: PARTICULAR REQUIREMENTS FOR ELECTRIC FISHING MACHINES |
| ISO 2819:2017 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
| UNE-EN ISO 4521:2010 | Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008) |
| I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| ASTM B 659 : 1990 : R2014 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| BS EN ISO 11177:2016 | Vitreous and porcelain enamels. Inside and outside enameled valves and pressure pipe fittings for untreated and potable water supply. Quality requirements and testing |
| ASTM B 659 : 1990 : R2008 : EDT 1 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| I.S. EN 60335-2-48:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL GRILLERS AND TOASTERS (IEC 60335-2-48:2002 (EQV)) |
| ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
| I.S. EN 60335-2-26:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS |
| I.S. EN 60335-2-39:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS |
| EN 60335-2-9:2003/A13:2010/AC:2012 | Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
| DIN EN 13438:2013-12 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| BS EN 10242:1995 | Threaded pipe fittings in malleable cast iron |
| IEC 60335-2-16:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers |
| BS EN ISO 4527:2003 | Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
| IEC 60335-2-12:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances |
| BS EN 12329:2000 | Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
| BS EN 13523-1:2017 | Coil coated metals. Test methods Film thickness |
| DIN EN 12329:2000-09 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON AND STEEL |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 10303:2015 | THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| I.S. EN 2133:2010 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN 13523-1:2017 | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| DIN EN 12330:2000-09 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM IRON OR STEEL |
| UNI EN 2133 : 2011 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| I.S. EN 13438:2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| I.S. EN ISO 1461:2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| I.S. EN 13858:2006 | CORROSION PROTECTION OF METALS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS ON IRON OR STEEL COMPONENTS |
| BS 1344-11:1998 | Methods of testing vitreous enamel finishes High voltage test for enamelled articles for service under highly corrosive conditions |
| VDE 0446-5 : 1996 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR DC SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| VDE 0674-1 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| ONORM EN ISO 1461 : 2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| DIN EN 61325 : 1996 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| VDE 0446-1 : 97 COR 1 2001 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - PART 1: CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| DIN EN 60168 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| DIN EN 60383-1 : 97 COR 1 2001 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1 KV - PART 1: CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| BS 3900-C5(2007) : 2007 | PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
| BS 3900-C5:1992 | Methods of test for paints. Tests associated with paint film formation Determination of film thickness |
| PREN ISO 28722 : DRAFT 2010 | VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE |
| BS EN ISO 19598:2016 | Metallic coatings. Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment |
| BS EN ISO 28762:2010 | Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification |
| 11/30187339 DC : 0 | BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES |
| 04/30117553 DC : DRAFT NOV 2004 | ISO 16172 - CONTINUOUS HOT-DIP METALLIC-COATED STEEL SHEET FOR CORRUGATED STEEL PIPE |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| IEC 60404-8-8:2017 | Magnetic materials - Part 8-8: Specifications for individual materials - Thin electrical steel strip and sheet for use at medium frequencies |
| I.S. EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| 11/30234437 DC : 0 | BS ISO 9364 - CONTINUOUS HOT-DIP 55% ALUMINIUM/ZINC ALLOY-COATED STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
| 15/30312507 DC : 0 | BS ISO 3575 - CONTINUOUS HOT-DIP ZINC-COATED AND ZINC-IRON ALLOY-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
| 15/30326949 DC : 0 | BS EN 62561-2 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| CSA E335.1-3E : 1994 | SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| 04/30114377 DC : DRAFT JUN 2004 | ISO 14788 - CONTINUOUS HOT-DIP ZINC-5 % ALUMINIUM ALLOY COATED STEEL SHEET |
| UNI EN ISO 28722 : 2011 | VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE |
| 16/30329243 DC : 0 | BS EN ISO 2082 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| I.S. EN 60335-2-16:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002 (MOD)) |
| DIN EN ISO 17668:2016-06 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| IEC 60745-2-2:2003+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches |
| BS EN 60335-2-99:2003 | Specification for safety of household and similar electrical appliances Particular requirements for commercial electric hoods |
| BS EN ISO 4528:2015 | Vitreous and porcelain enamel finishes. Guide to selection of test methods for vitreous and porcelain enamelled areas of articles |
| 07/30174359 DC : DRAFT NOV 2007 | BS EN 62561-2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| 14/30278233 DC : 0 | BS EN ISO 2746 - VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST |
| EN ISO 2081:2018 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018) |
| BS 3456-201:1990 | Specification for safety of household and similar electrical appliances General requirements |
| 02/711527 DC : DRAFT SEP 2002 | ISO 10684 - FASTENERS - HOT DIP GALVANIZED COATINGS |
| 18/30367063 DC : 0 | BS EN ISO 11177 - VITREOUS AND PORCELAIN ENAMELS - INSIDE AND OUTSIDE ENAMELLED VALVES AND PRESSURE PIPE FITTINGS FOR UNTREATED AND POTABLE WATER SUPPLY - QUALITY REQUIREMENTS AND TESTING |
| BS EN 60383-1:1998 | Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria |
| BS EN ISO 28765:2016 | Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| 10/30231999 DC : 0 | BS EN ISO 28763 - VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| UNE-EN 62561-2:2012 | Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes |
| PREN 3839 : DRAFT 1996 | AEROSPACE SERIES ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL |
| CSA E60335.2.23 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE |
| ASTM F 2919/F2919M : 2012 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.<sup>2</sup> [3871 mm<sup>2</sup>] in Panels |
| ISO 15208:2012 | Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality |
| ISO 2081:2018 | Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel |
| BS EN 60335-2-10 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| I.S. EN ISO 4521:2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| I.S. EN ISO 2063-2:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: EXECUTION OF CORROSION PROTECTION SYSTEMS (ISO 2063-2:2017) |
| CSA C22.2 No. 60745.2.12:2005 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR CONCRETE VIBRATORS |
| I.S. EN 60335-1:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 28722:2011 | VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE |
| BS EN 60335-1 : 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| I.S. EN ISO 17668:2016 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| I.S. EN 60335-2-74:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS |
| NF EN ISO 13123 : 2012 | METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT |
| NFL 10-201 : 1998 | AEROSPACE SERIES - LUBRICATING DRY FLUOROCARBONATED COATING WITH BINDING MATERIAL AND FILLERS, OF A MINIMUM THICKNESS OF 5 MM ON METALLIC SUBSTRATE - QUALITY OF COATED PARTS |
| I.S. EN 61537:2007 | CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS |
| BS ISO 16172:2011 | Continuous hot-dip metallic coated steel sheet for corrugated steel pipe |
| ISO 11177:2016 | Vitreous and porcelain enamels Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply Quality requirements and testing |
| BS EN 60335-2-50 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| EN IEC 62561-2:2018 | Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes |
| ISO 14788:2017 | Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities |
| PREN 13523-1 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| EN ISO 2063-1:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017) |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| ASTM B 499 : 2009 : R2014 | Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals |
| BS EN ISO 28721-1:2011 | Vitreous and porcelain enamels. Glass-lined apparatus for process plants Quality requirements for apparatus, components, appliances and accessories |
| BS EN ISO 28763:2011 | Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications |
| PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| UNI EN 1071-10 : 2009 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
| EN ISO 11177:2016 | Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2016) |
| I.S. EN 60335-2-59:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS |
| ISO 16172:2011 | Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe |
| UNI EN ISO 28721-1 : 2011 | VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 1: QUALITY REQUIREMENTS FOR APPARATUS, COMPONENTS, APPLIANCES AND ACCESSORIES |
| IEC 60335-2-28:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines |
| I.S. EN 1071-10:2009 | ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 10: DETERMINATION OF COATING THICKNESS BY CROSS SECTIONING |
| IEC 60745-2-21:2002+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners |
| IEC 60745-2-9:2003+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers |
| IEC 62561-2:2018 | Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes |
| IEC 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V |
| IEC 60745-2-8:2003+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers |
| EN 60335-2-16:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002/A2:2011) |
| I.S. EN 60335-2-91:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS |
| I.S. EN 60335-2-38:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS |
| IEC 60335-2-59:2002+AMD1:2006+AMD2:2009 CSV | Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers |
| I.S. EN 60335-2-80:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| IEC 60335-2-73:2002+AMD1:2006+AMD2:2009 CSV | Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters |
| IEC 60335-2-62:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks |
| DIN EN ISO 2063:2005-05 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| DIN EN 10303:2016-02 | THIN MAGNETIC STEEL STRIP AND SHEET FOR USE AT MEDIUM FREQUENCIES |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| ISO 13123:2011 | Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient |
| UNE-EN 62841-1:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
| ISO 17668:2016 | Zinc diffusion coatings on ferrous products Sherardizing Specification |
| IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie |
| IEC 60745-2-6:2003+AMD1:2006+AMD2:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers |
| ISO 28765:2016 | Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters |
| EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 60335-2-28:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES |
| UNE-EN ISO 6158:2012 | Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011) |
| EN 60745-1:2006 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60335-1:2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| CAN/CSA-C22.2 NO. 60335-1:11 (R2016) | Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1) |
| UL 60335-1:6ED 2016-10-31 | Standard for Safety of Household and Similar Appliances, Part 1: General Requirements |
| EN ISO 4521:2008 | Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008) |
| EN ISO 28722:2011 | Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008) |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| ONORM EN 2535 : 2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| UNI EN 13438 : 2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| UNI EN 10245-4 : 2011 | Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
| UNI EN ISO 1461 : 2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| UNI EN 10242 : 2009 | Threaded pipe fittings in malleable cast iron |
| ISO 6182-11:2003 | Fire protection Automatic sprinkler systems Part 11: Requirements and test methods for pipe hangers |
| 07/30174185 DC : 0 | BS EN ISO 1461 - HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| 16/30326003 DC : 0 | BS ISO 6182-11 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR PIPE HANGERS |
| 07/30168609 DC : 0 | BS ISO 28722 - VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF THE ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE |
| BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| I.S. EN 13811:2003 | SHERARDIZING - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SPECIFICATION |
| I.S. EN ISO 2082:2017 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2082:2017) |
| DIN EN ISO 28721-1:2011-06 | VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 1: QUALITY REQUIREMENTS FOR APPARATUS, COMPONENTS, APPLIANCES AND ACCESSORIES |
| PREN 13438 : DRAFT 2012 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| 02/121874 DC : DRAFT APR 2002 | PREN 14430 - VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| 13/30275588 DC : 0 | BS EN ISO 4528 - VITREOUS AND PORCELAIN ENAMEL FINISHES - GUIDE TO SELECTION OF TEST METHODS FOR VITREOUS AND PORCELAIN ENAMELLED AREAS OF ARTICLES |
| BS EN 1071-10:2009 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by cross sectioning |
| I.S. EN ISO 2063:2005 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| BS EN 50164-2:2008 | Lightning protection components (LPC) Requirements for conductors and earth electrodes |
| 16/30329239 DC : 0 | BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| BS EN ISO 13123:2011 | Metallic and other inorganic Coatings. Test method of cyclic heating for thermal barrier coatings under temperature gradient |
| BS EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products. Sherardizing. Specification |
| 14/30283676 DC : 0 | BS EN ISO 11177 - VITREOUS AND PORCELAIN ENAMELS - INSIDE AND OUTSIDE ENAMELLED VALVES AND PRESSURE PIPE FITTINGS FOR UNTREATED AND POTABLE WATER SUPPLY - QUALITY REQUIREMENTS AND TESTING |
| I.S. EN 15282:2007 | VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES |
| 11/30234411 DC : 0 | BS ISO 15208 - CONTINUOUS HOT-DIP ZINC-COATED TWIN-ROLL CAST STEEL SHEET OF COMMERCIAL QUALITY |
| 10/30207743 DC : 0 | BS ISO 3575 - CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES |
| DIN EN ISO 28763:2011-06 | VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| BS ISO 15211:2012 | Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| UNE-EN ISO 2082:2017 | Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017) |
| RE.AERO 62125 : 1978 | METALLIC AND NON-METALLIC COATINGS - MEASUREMENT OF THE THICKNESS BY MEANS OF NON-DESTRUCTIVE PROCESS |
| 17/30334109 DC : 0 | BS ISO 14788 - STEEL SHEET, ZINC-5% ALUMINIUM ALLOY-COATED BY THE CONTINUOUS HOT-DIP PROCESS, OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
| 02/121875 DC : DRAFT APR 2002 | PREN 14431 - VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF THE ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE |
| ONORM EN 2133 : 2011 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH UP TO 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| DIN EN ISO 2746:2016-02 | VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST (ISO 2746:2015) |
| 14/30273520 DC : 0 | BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES |
| 16/30339916 DC : 0 | BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| BS EN 60076-1:2011 | Power transformers General |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| 15/30300661 DC : 0 | BS EN ISO 19598 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)- FREE TREATMENT |
| 17/30366369 DC : 0 | BS EN 2133 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| 07/30172345 DC : 0 | BS EN 15724 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - SECONDARY CONTAINMENTS USED WITH TANKS COMPLYING WITH EN 13341 - REQUIREMENTS AND TEST METHODS |
| BS ISO 3575:2011 | Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities |
| BS ISO 15726:2009 | Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron |
| I.S. EN IEC 62561-2:2018 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES |
| 07/30169180 DC : 0 | BS ISO 28721-1 - VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 1: QUALITY REQUIREMENTS FOR APPARATUS, COMPONENTS, APPLIANCES AND ACCESSORIES |
| DIN EN ISO 13123:2012-04 | Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011) |
| UNE-EN ISO 28722:2011 | Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008) |
| I.S. EN ISO 28762:2010 | VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| IEC 60745-2-11:2003+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) |
| I.S. EN 60335-2-10:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| I.S. EN 60335-2-50:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPARATUS - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| ISO 3575:2016 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
| I.S. EN 60335-2-99:2003/A1:2019 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
| I.S. EN ISO 2063-1:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017) |
| I.S. EN ISO 9717:2017 | METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS (ISO 9717:2017) |
| BS EN ISO 2063-2:2017 | Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems |
| CEI EN 60076-1 : 2015 | POWER TRANSFORMERS - PART 1: GENERAL |
| ISO 2063-1:2017 | Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
| BS EN ISO 2819:2018 | Metallic coatings on metallic substrates. Electrodeposited and chemically deposited coatings. Review of methods available for testing adhesion |
| ISO 2063-2:2017 | Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems |
| 16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| UNI EN ISO 6158 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
| ASTM B 659 : 1990 : R1997 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ONORM EN ISO 28763 : 2011 | VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| EN ISO 2063-2:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017) |
| EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
| I.S. EN 60335-2-12:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES |
| EN ISO 6158:2011 | Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011) |
| EN 60335-2-48 : 2003 AMD 11 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS (IEC 60335-2-48:2002) |
| IEC 60168:1994+AMD1:1997+AMD2:2000 CSV | Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V |
| I.S. EN 60335-2-84:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS |
| I.S. EN 60335-2-45:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002 (EQV)) |
| I.S. EN 60335-2-41:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS |
| I.S. EN ISO 28721-1:2011 | VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 1: QUALITY REQUIREMENTS FOR APPARATUS, COMPONENTS, APPLIANCES AND ACCESSORIES |
| I.S. EN 60745-1:2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| IEC 60335-2-100:2002 | Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
| I.S. EN ISO 28765:2016 | VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES (ISO 28765:2016) |
| IEC 60335-2-74:2002+AMD1:2006+AMD2:2009 CSV | Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters |
| I.S. EN ISO 28763:2011 | VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| EN 60335-2-47:2003/A11:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002) |
| IEC 60335-2-76:2002+AMD1:2006+AMD2:2013 CSV | Household and similar electrical appliances - Safety - Part 2-76:Particular requirements for electric fence energizers |
| I.S. EN 60335-2-82:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES |
| IEC 60335-2-85:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers |
| IEC 60335-2-77:2002 | Household and similar electrical appliances - Safety - Part 2-77: Particular requirements for pedestrian controlled mains-operated lawnmowers |
| IEC 60076-15:2015 | Power transformers - Part 15: Gas-filled power transformers |
| I.S. EN 62155:2003 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| I.S. EN 60335-2-51:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002 (EQV)) |
| ONORM EN ISO 28721-1 : 2011 | VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 1: QUALITY REQUIREMENTS FOR APPARATUS, COMPONENTS, APPLIANCES AND ACCESSORIES |
| EN 60335-2-82:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES |
| EN 60335-2-59:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS |
| DIN EN 10242:1995-03 | THREADED PIPE FITTING IN MALLEABLE CAST IRON |
| DIN EN ISO 1461:2009-10 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| DIN EN 13523-1:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS |
| DIN EN ISO 3882:2003-10 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| DIN EN 10106:2016-03 | COLD ROLLED NON-ORIENTED ELECTRICAL STEEL STRIP AND SHEET DELIVERED IN THE FULLY PROCESSED STATE |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| 12/30272980 DC : 0 | BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| IEC 60335-2-88:2002 | Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| IEC 61325:1995 | Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria |
| BS EN ISO 10684:2004 | Fasteners. Hot dip galvanized coatings |
| BS EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| BS EN 10284:2000 | Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems |
| UNE-EN 10303:2016 | Thin magnetic steel strip and sheet for use at medium frequencies |
| BS EN 13858:2006 | Corrosion protection of metals. Non-electrolytically applied zinc flake coatings on iron or steel components |
| BS EN ISO 3882:2003 | Metallic and other inorganic coatings. Review of methods of measurement of thickness |
| IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
| IEC 60335-2-101:2002+AMD1:2008+AMD2:2014 CSV | Household and similar electrical appliances - Safety - Part 2-101:Particular requirements for vaporizers |
| ISO 4521:2008 | Metallic and other inorganic coatings — Electrodeposited silver and silver alloy coatings for engineering purposes — Specification and test methods |
| ISO 28722:2008 | Vitreous and porcelain enamels Characteristics of enamel coatings applied to steel panels intended for architecture |
| BS EN ISO 12683:2004 | Mechanically deposited coatings of zinc. Specification and test methods |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| IEC 60335-2-26:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks |
| BS EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| BS EN 15282:2007 | Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| UNE-EN 60076-1:2013 | Power transformers - Part 1: General |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| IEC 60335-2-61:2002+AMD1:2005+AMD2:2008 CSV | Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
| IEC 60335-2-70:2002+AMD1:2007+AMD2:2013 CSV | Household and similar electrical appliances - Safety - Part 2-70:Particular requirements for milking machines |
| IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| IEC 60745-2-12:2003+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators |
| IEC 60745-2-4:2002+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type |
| ISO 4528:2015 | Vitreous and porcelain enamel finishes Guide to selection of test methods for vitreous and porcelain enamelled areas of articles |
| IEC 60335-2-44:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| IEC 60335-2-92:2002 | Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| IEC 60335-2-99:2003+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
| ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
| ISO 12683:2004 | Mechanically deposited coatings of zinc Specification and test methods |
| ISO 2082:2017 | Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| IEC 60335-2-52:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances |
| IEC 60335-2-98:2002+AMD1:2004+AMD2:2008 CSV | Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers |
| IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
| IEC 60335-2-45:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances |
| IEC 60335-2-96:2002+AMD1:2003+AMD2:2008 CSV | Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating |
| ISO 2746:2015 | Vitreous and porcelain enamels High voltage test |
| BS EN 14866:2005 | Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications |
| IEC 60335-2-84:2002+AMD1:2008+AMD2:2013 CSV | Household and similar electrical appliances - Safety - Part 2-84:Particular requirements for toilet appliances |
| IEC 60745-2-18:2003+AMD1:2008 CSV | Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools |
| IEC 61537:2006 | Cable management - Cable tray systems and cable ladder systems |
| IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
| ISO 28763:2008 | Vitreous and porcelain enamels Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers Specifications |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| ISO 28762:2010 | Vitreous and porcelain enamels Enamel coatings applied to steel for writing surfaces Specification |
| BS EN 13438:2013 | Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| UNE-EN ISO 28721-1:2011 | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2008) |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| UNE-EN ISO 28763:2012 | Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (ISO 28763:2008) |
| IEC 60335-2-56:2002+AMD1:2008+AMD2:2014 CSV | Household and similar electrical appliances - Safety - Part 2-56:Particular requirements for projectors and similar appliances |
| IEC 60335-2-65:2002+AMD1:2008+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-65:Particular requirements for air-cleaning appliances |
| ISO 12736:2014 | Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| BS EN 2133:2010 | Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys |
| BS EN 13811:2003 | Sherardizing. Zinc diffusion coatings on ferrous products. Specification |
| ISO 28721-1:2008 | Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 1: Quality requirements for apparatus, components, appliances and accessories |
| UNE-EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| BS EN 12330:2000 | Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| EN ISO 28762:2010 | Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010) |
| EN ISO 28765:2016 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 14431:2004 | Vitreous and porcelain enamels - Characteristics of the enamel coatings applied to steel panels intended for architecture |
| EN ISO 28721-1:2011 | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories (ISO 28721-1:2008) |
| EN ISO 4528:2015 | Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2015) |
| EN 13858:2006 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| EN ISO 28763:2011 | Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications (ISO 28763:2008) |
| EN 15282:2007 | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016) |
| EN 14430:2004 | Vitreous and porcelain enamels - High voltage test |
| EN ISO 19598:2016 | Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016) |
| EN ISO 2746:2015 | Vitreous and porcelain enamels - High voltage test (ISO 2746:2015) |
| EN ISO 2063:2005 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| EN ISO 13123:2011 | Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011) |
| EN 14864:2005+A1:2007 | Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification |
| EN ISO 12683:2004 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004) |
| EN 22063 : 1993 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS |
| EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| EN 2535:2011 | Aerospace series - Vacuum deposition of cadmium |
| EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN 13811:2003 | Sherardizing - Zinc diffusion coatings on ferrous products - Specification |
| EN 14866:2005 | Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications |
| EN 15159-1:2006 | Vitreous and porcelain enamels - Glass lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN ISO 4527:2003 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
| UNI EN ISO 28762 : 2011 | VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| DIN EN ISO 28762:2011-02 | Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010) |
| 12/30238456 DC : 0 | BS EN 13438 - PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| 14/30256684 DC : 0 | BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION |
| I.S. EN 14431:2004 | VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF THE ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| BS EN 62561-2:2012 | Lightning Protection System Components (LPSC) Requirements for conductors and earth electrodes |
| 05/30129619 DC : DRAFT FEB 2005 | IEC 61537 ED.2 - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS FOR CABLE MANAGEMENT |
| 10/30232007 DC : 0 | BS EN ISO 28765 - VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES |
| BS EN ISO 28722:2011 | Vitreous and porcelain enamels. Characteristics of enamel coatings applied to steel panels intended for architecture |
| UNI EN 2535 : 2012 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| UNE-EN ISO 28762:2011 | Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010) |
| ISO 14657:2005 | Zinc-coated steel for the reinforcement of concrete |
| 16/30340708 DC : 0 | BS EN 10348-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS |
| BS EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools Particular requirements for chain saws |
| DIN EN 1071-10:2009-10 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
| 04/30117557 DC : DRAFT OCT 2004 | ISO 9364 - CONTINUOUS HOT-DIP ALUMINUM/ZINC-COATED STEEL SHEET OF COMMERCIAL, DRAWING AND STRUCTURAL QUALITIES |
| 06/19977015 DC : DRAFT JULY 2006 | BS EN 10344 - MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR STEEL PIPES |
| BS EN 62155:2003 | Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V |
| 96/707693 DC : DRAFT JUN 1996 | ISO/DIS 14788 - CONTINUOUS HOT-DIP ZINC-5% ALUMINIUM ALLOY COATED STEEL SHEET |
| 17/30360728 DC : DRAFT MAY 2017 | BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| NF EN ISO 28722 : 2011 | VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE |
| CSA C62155 : 2006 : R2011 | HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V |
| BS ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
| DIN 28054-1:2000-09 | CHEMICAL APPARATUS - COATING WITH ORGANIC MATERIALS FOR METALLIC COMPONENTS - PART 1: REQUIREMENTS AND TESTING |
| DIN EN ISO 28722:2011-06 | Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008) |
| NF EN ISO 28763 : 2011 | VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| CSA C1325 : 1999 : R2011 | INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| CSA E60335.2.55 : 2005 : R2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
| BS EN 60745-1 : 2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA E60335.2.76 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-76: PARTICULAR REQUIREMENTS FOR ELECTRIC FENCE ENERGIZERS |
| EN 60335-2-73 : 2003 AMD 2 2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS |
| UNI EN ISO 28763 : 2011 | VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS |
| ISO 4522-2:1985 | Metallic coatings Test methods for electrodeposited silver and silver alloy coatings Part 2: Adhesion tests |
| I.S. EN ISO 19598:2016 | ETALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| I.S. EN 60335-2-71:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| I.S. EN ISO 11177:2016 | VITREOUS AND PORCELAIN ENAMELS - INSIDE AND OUTSIDE ENAMELLED VALVES AND PRESSURE PIPE FITTINGS FOR UNTREATED AND POTABLE WATER SUPPLY - QUALITY REQUIREMENTS AND TESTING (ISO 11177:2016) |
| BS EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method |
| ISO 15211:2012 | Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel |
| AEP-59 : 2009 | APPLICATION PROCESS FOR OPTIMUM PAINT AND COATINGS SYSTEMS' PERFORMANCE |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| I.S. EN 60335-2-99:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
| UNI EN ISO 2081 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| I.S. EN ISO 2819:2018 | METALLIC COATINGS ON METALLIC SUBSTRATES - ELECTRODEPOSITED AND CHEMICALLY DEPOSITED COATINGS - REVIEW OF METHODS AVAILABLE FOR TESTING ADHESION (ISO 2819:2017) |
| DIN EN ISO 19598:2015-07 (Draft) | METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| ASTM B 659 : 1990 : R2003 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| EN ISO 9717:2017 | Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017) |
| I.S. HD 633:1999 | TESTS ON OIL-FILLED (FLUID FILLED), PAPER- OR POLYPROPYLENE PAPER LAMINATED-INSULATED, METAL-SHEATHED CABLES AND ACCESSORIES FOR ALTERNATING VOLTAGES UP TO AND INCLUDING 400 KV (UM = 420 KV) |
| IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines |
| I.S. EN 60335-2-73:2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS |
| DIN EN ISO 10684:2011-09 | Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008) |
| IEC 60335-2-55:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds |
| IEC 60335-2-83:2001+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage |
| IEC 60745-2-14:2003+AMD1:2006+AMD2:2010 CSV | Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers |
| IEC 60335-2-10:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines |
| BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
| BS EN 14431:2004 | Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture |
| IEC 60745-1:2006 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
| BS EN 10240:1998 | Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| ISO 19598:2016 | Metallic coatings — Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment |
| EN 60335-2-81:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335-2-81:2002/A2:2011) |
| DIN EN ISO 19598:2017-04 | METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| EN 10284:2000 | Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems |
| DIN EN 15282:2007-06 | VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES |
| EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| EN 60335-2-71 : 2003 AMD 1 2007 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS |
| EN 12329 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| DIN EN ISO 2081:2009-05 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| EN 60335-2-80:2003/A2:2009 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 60335-2-50:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE |
| EN 60335-2-88:2002 | Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| EN 60335-2-91:2003 | Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
| DIN EN 14431:2004-12 | VITREOUS AND PORCELAIN ENAMELS - CHARACTERISTICS OF THE ENAMEL COATINGS APPLIED TO STEEL PANELS INTENDED FOR ARCHITECTURE |
| EN 50164-2:2008 | Lightning Protection Components (LPC) - Part 2: Requirements for conductors and earth electrodes |
| CEN/TS 1071-10:2004 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
| EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| EN 61325:1995 | Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria |
| EN 61537:2007 | Cable management - Cable tray systems and cable ladder systems |
| DIN EN 14864:2007-12 | VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| EN 60335-2-10:2003/A1:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES |
| EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| EN 60335-2-51:2003/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002/A2:2011) |
| EN 60335-2-23:2003/A2:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE (IEC 60335-2-23:2003/A2:2012, MODIFIED) |
| EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws |
| DIN EN 14430:2004-12 | VITREOUS AND PORCELAIN ENAMELS - HIGH VOLTAGE TEST |
| DIN EN ISO 4521:2009-01 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| DIN EN ISO 4528:2015-05 | Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2015) |
| DIN EN ISO 6158:2011-10 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES (ISO 6158:2011) |
| EN 50144-1 : 98 COR 2005 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| EN 60335-2-45:2002/A2:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002/A2:2011) |
| DIN EN ISO 12683:2005-02 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004); German version EN ISO 12683:2004 |
| DIN EN 13858:2007-02 | Corrosion protection of metals - Non-electrolytically applied zinc flake coatings on iron or steel components |
| CSA C22.2 No. 60745.2.20 : 2005 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-20: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| CSA C22.2 No. 60745.2.14 : 2004 : INC : AMD 2 : 2011 : R2013 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR PLANERS |
| CSA C22.2 No. 60745.2.6 : 2004 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS |
| CSA C22.2 No. 60745.1 : 2007 : R2012 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA E60335.2.53 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-53: PARTICULAR REQUIREMENTS FOR SAUNA HEATING APPLIANCES |
| CSA C22.2 No. 60745.2.9 : 2004 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR TAPPERS |
| CSA C22.2 No. 60745.2.4 : 2004 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-4: PARTICULAR REQUIREMENTS FOR SANDERS AND POLISHERS OTHER THAN DISK TYPE |
| CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| PIP CTSL1000 : 2017 | APPLICATION OF INTERNAL LININGS |
| CSA C22.2 No. 60745.2.4 : 2004 : INC : AMD 1 : 2009 : R2013 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-4: PARTICULAR REQUIREMENTS FOR SANDERS AND POLISHERS OTHER THAN DISK TYPE |
| CSA C22.2 No. 60745.2.20 : 2005 : INC : AMD 1 : 2009 : R200900 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-20: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| CSA C22.2 No. 60745.2.18 : 2005 : INC : AMD 1 : 2009 : R2014 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-18: PARTICULAR REQUIREMENTS FOR STRAPPING TOOLS |
| CSA C22.2 No. 60745.1 : 2007 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : FR | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA E60335.2.53 : 2005 : R2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-53: PARTICULAR REQUIREMENTS FOR SAUNA HEATING APPLIANCES |
| PIP CTSU1000 : 2018 | APPLICATION OF UNDERGROUND COATINGS |
| CSA C22.2 No. 60745.2.18 : 2005 : INC : AMD 1 : 2009 : R200900 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-18: PARTICULAR REQUIREMENTS FOR STRAPPING TOOLS |
| CSA C22.2 No. 60745.2.1:2004 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS |
| CSA C22.2 No. 60745.2.1 : 2004 : INC : AMD 1 : 2010 : FR | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS |
| CAN/CSA-E60335-2-53-05 (R2018) | Household and Similar Electrical Appliances - Safety - Part 2-53: Particular Requirements for Sauna Heating Appliances (Adopted CEI/IEC 60335-2-53:2005, third edition, 2002-10) | Appareils électrodomestiques et analogues - Sécurité - Partie 2-53: Règles particulières pour les appareils de chauffage de saunas (norme CEI/IEC 60335-2-53:2005 adoptée, troisième édition, 2002-10) |
| CSA C22.2 No. 60745.2.11 : 2004 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS |
| CSA C22.2 No. 60745.2.1 : 2004 : INC : AMD 1 : 2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS |
| CSA C22.2 No. 60745.2.21 :2005 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR DRAIN CLEANERS |
| CSA C22.2 No. 60745.2.11 : 2004 : INC : AMD 1 : 2009 : R2013 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR RECIPROCATING SAWS |
| CSA C22.2 No. 60745.2.18 : 2005(R2018) | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-18: PARTICULAR REQUIREMENTS FOR STRAPPING TOOLS |
| CSA C22.2 No. 60745.2.9 : 2004 : INC : AMD 1 : 2009 : R2013 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR TAPPERS |
| CSA C22.2 No. 60745.1 : 2007 : INC : UPD 2 : 2011 : R2012 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60745.2.8: 2004 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHEARS AND NIBBLERS |
| I.S. EN ISO 3882:2003 | METALLIC AND OTHER INORGANIC COATINGS - REVIEW OF METHODS OF MEASUREMENT OF THICKNESS |
| CSA C22.2 No. 60745.2.14 :2004 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR PLANERS |
| CSA C22.2 No. 60745.1 : 2007 : INC : UPD 3 : 2013 : R201200 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60745.2.6 : 2004 : INC : AMD 2 : 2009 : R2013 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR HAMMERS |
| CSA C22.2 No. 60745.2.1 : 2004 : INC : AMD 1 : 2010 : R2013 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-1: PARTICULAR REQUIREMENTS FOR DRILLS AND IMPACT DRILLS |
| CSA C22.2 No. 60745.2.8 : 2004 : INC : AMD 1 : 2009 : R2013 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-8: PARTICULAR REQUIREMENTS FOR SHEARS AND NIBBLERS |
| CSA C22.2 No. 60745.2.4 : 2004 : R2013 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-4: PARTICULAR REQUIREMENTS FOR SANDERS AND POLISHERS OTHER THAN DISK TYPE |
| CSA C22.2 No. 60745.2.21 :2005 : INC : AMD 1 : 2009 : R2014 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-21: PARTICULAR REQUIREMENTS FOR DRAIN CLEANERS |
| CSA C22.2 No. 60745.2.18: 2005 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-18: PARTICULAR REQUIREMENTS FOR STRAPPING TOOLS |
| CSA C22.2 No. 60745.2.20 : 2005 : INC : AMD 1 : 2009 : R2014 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-20: PARTICULAR REQUIREMENTS FOR BAND SAWS |
| PIP CTSE1000 : 2012 | APPLICATION OF EXTERNAL COATINGS |
| CSA C22.2 No. 60745.1 : 2007 (R2017) | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| AS 2699.2:2020 | Built-in components for masonry construction Connectors and accessories |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 19840:2012 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| ISO 2361:1982 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| AS 2699.1:2020 | Built-in components for masonry construction Wall ties |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| AS 2699.3:2020 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 21968:2005 | Non-magnetic metallic coatings on metallic and non-metallic basis materials Measurement of coating thickness Phase-sensitive eddy-current method |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.