ISO 2177:2003
Current
Current
The latest, up-to-date edition.
Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
03-19-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 2177:2002 describes a coulometric method by anodic dissolution for measuring the thickness of metallic coatings. It is only applicable to conductive coatings.
Typical combinations of coatings and substrates that can be tested by this method are given. Other combinations may be tested with electrolytes in current use, or new electrolytes may be developed for them but, in both cases, it is necessary to verify the suitability of the complete system.
ISO 2177:2002 is also applicable to multi-layer systems, e.g Cu-Ni-Cr. It may be used to measure the thickness of coatings applied by various means, if due account is taken of special features such as the presence of an alloy layer. In some cases, the presence and thickness of diffusion layers can also be measured. It can also be used to measure the thickness of coatings on cylindrical specimens and wires.
| Committee |
ISO/TC 107
|
| DevelopmentNote |
Supersedes ISO/FDIS 2177. (03/2003)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IS 14126 : 2019 | Identical |
| NBN EN 2133 : 2010 | Identical |
| NBN EN ISO 2177 : 2004 | Identical |
| NEN EN ISO 2177 : 2004 | Identical |
| NS EN ISO 2177 : 2ED 2004 | Identical |
| I.S. EN ISO 2177:2004 | Identical |
| PN EN ISO 2177 : 2006 | Identical |
| SN EN ISO 2177 : 2004 | Identical |
| UNI EN ISO 2177 : 2004 | Identical |
| SS-EN ISO 2177:2004 | Identical |
| UNE-EN ISO 2177:2005 | Identical |
| BS EN ISO 2177:2004 | Identical |
| EN ISO 2177:2004 | Identical |
| NF EN ISO 2177 : 2004 | Identical |
| NFA 91 111 : 1986 | Identical |
| SNV ISO 2177 : 1985 | Identical |
| DIN EN ISO 2177:2004-08 | Identical |
| UNI ISO 2177 : 1988 | Identical |
| DIN 50955:1983-12 | Similar to |
| UNE 112002:1992 | Identical |
| ISO 8442:1988 | Stainless steel and silver-plated table cutlery Requirements |
| 07/30174185 DC : 0 | BS EN ISO 1461 - HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
| UNI EN ISO 4521 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| EN ISO 2081:2018 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018) |
| 11/30240462 DC : 0 | BS EN 13603 - COPPER AND COPPER ALLOYS - TEST METHODS FOR ASSESSING PROTECTIVE TIN COATINGS ON DRAWN ROUND COPPER WIRE FOR ELECTRICAL PURPOSES |
| BS EN 2535:2011 | Aerospace series. Vacuum deposition of cadmium |
| 08/30101302 DC : DRAFT JAN 2008 | BS ISO 17334 - METALLIC AND OTHER INORGANIC COATINGS - AUTOCATALYTIC NICKEL OVER AUTOCATALYTIC COPPER FOR ELECTROMAGNETIC SHIELDING |
| BS EN ISO 2179:2016 | Electroplated coatings of tin-nickel alloy. Specification and test methods |
| 15/30297370 DC : 0 | BS ISO 19487 - METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED NICKEL-CERAMICS COMPOSITE COATING |
| BS ISO 19487:2016 | Metallic and other inorganic coatings. Electrodeposited nickel-ceramics composite coatings |
| ISO 17334:2008 | Metallic and other inorganic coatings — Autocatalytic nickel over autocatalytic copper for electromagnetic shielding |
| BS EN ISO 4521:2008 | Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods |
| 92/75739 DC : DRAFT APR 1992 | PREN 3765 - AEROSPACE SERIES - ELECTROLYTIC SILVER PLATING FOR GENERAL USE - STEELS, HEAT RESISTING ALLOYS, COPPER AND COPPER ALLOYS |
| EN 13603:2013 | Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
| I.S. EN ISO 4518:1995 | METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - PROFILOMETRIC METHOD |
| BS EN ISO 27874:2008 | Metallic coatings. Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes. Specification and test methods |
| I.S. EN 15646:2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| UNE-EN 15646:2010 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| 07/30167467 DC : 0 | BS EN ISO 27874 - METALLIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| BS ISO 1458:2002 | Metallic coatings. Electrodeposited coatings of nickel |
| I.S. EN 2535:2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| PREN 3765 : 200P1 | AEROSPACE SERIES - ELECTROLYTIC SILVER PLATING FOR GENERAL USE - STEELS, HEAT RESISTING ALLOYS, COPPER AND COPPER ALLOYS |
| I.S. EN ISO 6158:2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
| ONORM EN ISO 6158 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
| ISO 19487:2016 | Metallic and other inorganic coatings — Electrodeposited nickel-ceramics composite coatings |
| BS EN ISO 6158:2011 | Metallic and other inorganic coatings. Electrodeposited coatings of chromium for engineering purposes |
| ISO 6158:2011 | Metallic and other inorganic coatings Electrodeposited coatings of chromium for engineering purposes |
| I.S. EN ISO 27874:2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| BS EN ISO 2081:2018 | Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel |
| ASTM B 504 : 1990 : R2011 | Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
| DIN EN ISO 2081:2016-04 (Draft) | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| ASTM B 504 : 1990 : R1997 | Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
| ISO 22779:2006 | Metallic coatings — Physical vapour-deposited coatings of aluminium — Specification and test methods |
| DIN EN 13603:2013-08 | Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
| ISO 2179:1986 | Electroplated coatings of tin-nickel alloy — Specification and test methods |
| ISO 8442-4:1997 | Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 4: Requirements for gold plated cutlery |
| EN 2133:2010 | Aerospace series - Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys |
| EN ISO 2082:2017 | Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017) |
| DIN EN ISO 8442-2:2017-09 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - CUTLERY AND TABLE HOLLOWARE - PART 2: REQUIREMENTS FOR STAINLESS STEEL AND SILVER-PLATED CUTLERY (ISO 8442-2:1997) |
| EN ISO 1456:2009 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
| EN 12330 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
| DIN EN ISO 4527:2003-10 | METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS |
| I.S. EN 12330:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM ON IRON OR STEEL |
| I.S. EN 12329:2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| UNE-EN ISO 19598:2017 | Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016) |
| 14/30298696 DC : 0 | BS ISO 3160-2 - WATCH-CASES AND ACCESSORIES - GOLD ALLOY COVERINGS - PART 2: DETERMINATION OF FINENESS, THICKNESS, CORROSION RESISTANCE AND ADHESION |
| BS EN ISO 9717:2017 | Metallic and other inorganic coatings. Phosphate conversion coating of metals |
| 03/317246 DC : 0 | ISO 2081 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| BS EN ISO 2082:2017 | Metallic and other inorganic coatings. Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| 03/321258 DC : 0 | ISO/DIS 2082 - METALLIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| EN ISO 4518:1995 | Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1980) |
| BS ISO 22778:2006 | Metallic coatings. Physical vapour-deposited coatings of cadmium on iron and steel. Specification and test methods |
| BS ISO 3160-2:2015 | Watch-cases and accessories. Gold alloy coverings Determination of fineness, thickness, corrosion resistance and adhesion |
| ISO 4522-1:1985 | Metallic coatings Test methods for electrodeposited silver and silver alloy coatings Part 1: Determination of coating thickness |
| 07/30171995 DC : 0 | BS ISO 15726 - ELECTRODEPOSITED COATINGS AND RELATED FINISHES - ELECTROPLATED ZINC ALLOYS WITH NICKEL, COBALT OR IRON |
| NF EN ISO 1456 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND OF COOPER PLUS NICKEL PLUS CHROMIUM |
| ASTM B 504 : 1990 : R2017 | Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
| 97/700600 DC : DRAFT JAN 1997 | PREN 3839 - AEROSPACE SERIES - ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL |
| UNI EN 13603 : 2013 | COPPER AND COPPER ALLOYS - TEST METHODS FOR ASSESSING PROTECTIVE TIN COATINGS ON DRAWN ROUND COPPER WIRE FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 2081:2018 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2081:2018) |
| PREN 2535 : 200P1 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| DIN EN ISO 8442-2:1998-03 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - CUTLERY AND TABLE HOLLOWARE - PART 2: REQUIREMENTS FOR STAINLESS STEEL AND SILVER-PLATED CUTLERY (ISO 8442-2:1997) |
| ISO 9717:2017 | Metallic and other inorganic coatings — Phosphate conversion coating of metals |
| ISO 22778:2006 | Metallic coatings — Physical vapour-deposited coatings of cadmium on iron and steel — Specification and test methods |
| UNE-EN ISO 4521:2010 | Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008) |
| ISO 4525:2003 | Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials |
| BS EN 12540:2000 | Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium |
| BS EN ISO 4527:2003 | Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods |
| BS EN 12329:2000 | Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel |
| ISO 4526:2004 | Metallic coatings Electroplated coatings of nickel for engineering purposes |
| I.S. EN 13603:2013 | COPPER AND COPPER ALLOYS - TEST METHODS FOR ASSESSING PROTECTIVE TIN COATINGS ON DRAWN ROUND COPPER WIRE FOR ELECTRICAL PURPOSES |
| DIN EN 12329:2000-09 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON AND STEEL |
| I.S. EN 2133:2010 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| DIN EN 12330:2000-09 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF CADMIUM IRON OR STEEL |
| UNI EN 2133 : 2011 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| DIN EN ISO 27874:2009-01 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| BS ISO 17334:2008 | Metallic and other inorganic coatings. Autocatalytic nickel over autocatalytic copper for electromagnetic shielding |
| BS EN ISO 19598:2016 | Metallic coatings. Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment |
| 15/30312397 DC : 0 | BS EN 16866 - METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
| 16/30329239 DC : 0 | BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| 08/30178971 DC : DRAFT FEB 2008 | BS ISO 1456 - METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM AND OF COPPER PLUS NICKEL PLUS CHROMIUM |
| 16/30329243 DC : 0 | BS EN ISO 2082 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| DIN EN 3765:1997-09 (Draft) | AEROSPACE SERIES - ELECTROLYTIC SILVER PLATING FOR GENERAL USE - STEELS, HEAT RESISTING ALLOYS, COPPER AND COPPER ALLOYS |
| BS EN ISO 1456:2009 | Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| UNE-EN ISO 2082:2017 | Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2017) |
| BS EN 15646:2009 | Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods |
| UNI EN 15646 : 2009 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| 03/317245 DC : DRAFT OCT 2003 | ISO 22778 - METALLIC COATINGS - VAPOUR DEPOSITED COATINGS OF CADMIUM ON IRON AND STEEL - SPECIFICATION AND TEST METHODS |
| PREN 3839 : DRAFT 1996 | AEROSPACE SERIES ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL |
| ASTM B 504 : 1990 : R2007 | Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
| I.S. EN ISO 2179:2016 | ELECTROPLATED COATINGS OF TIN-NICKEL ALLOY - SPECIFICATION AND TEST METHODS (ISO 2179:1986) |
| ASTM B 659 : 1990 : R2008 : EDT 1 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ISO 2081:2018 | Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel |
| I.S. EN ISO 4521:2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| ISO 1458:2002 | Metallic coatings Electrodeposited coatings of nickel |
| ASTM B 659 : 1990 : R2014 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ISO 7587:1986 | Electroplated coatings of tin-lead alloys — Specification and test methods |
| ISO 4518:1980 | Metallic coatings Measurement of coating thickness Profilometric method |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| UNE-EN ISO 6158:2012 | Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011) |
| EN ISO 4521:2008 | Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008) |
| EN ISO 4527:2003 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
| UNI EN ISO 1456 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND OF COPPER PLUS NICKEL PLUS CHROMIUM |
| ONORM EN 2535 : 2011 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| I.S. EN ISO 8442-4:1998 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - CUTLERY AND TABLE HOLLOWARE - PART 4: REQUIREMENTS FOR GOLD-PLATED CUTLERY |
| EN ISO 27874:2008 | Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008) |
| ISO 3160-2:2015 | Watch-cases and accessories — Gold alloy coverings — Part 2: Determination of fineness, thickness, corrosion resistance and adhesion |
| ISO 15726:2009 | Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron |
| DIN EN ISO 2179:2016-08 | ELECTROPLATED COATINGS OF TIN-NICKEL ALLOY - SPECIFICATION AND TEST METHODS (ISO 2179:1986) |
| I.S. EN ISO 2082:2017 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF CADMIUM WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2082:2017) |
| NF EN ISO 6158 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
| 16/30339916 DC : 0 | BS EN 2133 - AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| RE.AERO 62125 : 1978 | METALLIC AND NON-METALLIC COATINGS - MEASUREMENT OF THE THICKNESS BY MEANS OF NON-DESTRUCTIVE PROCESS |
| ONORM EN 2133 : 2011 | AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH UP TO 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| 03/317247 DC : DRAFT OCT 2003 | ISO 22779 - METALLIC COATINGS - VAPOUR DEPOSITED COATINGS OF ALUMINIUM - SPECIFICATION AND TEST METHODS |
| 15/30300661 DC : 0 | BS EN ISO 19598 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)- FREE TREATMENT |
| 17/30366369 DC : 0 | BS EN 2133 AEROSPACE SERIES - CADMIUM PLATING OF STEELS WITH SPECIFIED TENSILE STRENGTH <= 1450 MPA, COPPER, COPPER ALLOYS AND NICKEL ALLOYS |
| BS ISO 15726:2009 | Metallic coatings and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron |
| I.S. EN ISO 9717:2017 | METALLIC AND OTHER INORGANIC COATINGS - PHOSPHATE CONVERSION COATING OF METALS (ISO 9717:2017) |
| UNI EN ISO 6158 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
| ASTM B 659 : 1990 : R1997 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| ASTM B 504 : 1990 : R2002 | Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method |
| EN ISO 6158:2011 | Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011) |
| ISO 8442-2:1997 | Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 2: Requirements for stainless steel and silver-plated cutlery |
| DIN EN ISO 3882:2003-10 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| BS EN ISO 3882:2003 | Metallic and other inorganic coatings. Review of methods of measurement of thickness |
| BS EN ISO 4526:2004 | Metallic coatings. Electroplated coatings of nickel for engineering purposes |
| ISO 4521:2008 | Metallic and other inorganic coatings — Electrodeposited silver and silver alloy coatings for engineering purposes — Specification and test methods |
| BS EN ISO 12683:2004 | Mechanically deposited coatings of zinc. Specification and test methods |
| ISO 8442-3:1997 | Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 3: Requirements for silver-plated table and decorative holloware |
| BS EN ISO 8442-3:1998 | Materials and articles in contact with foodstuffs. Cutlery and table holloware Requirements for silver-plated table and decorative holloware |
| ISO 8442-6:2000 | Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 6: Lightly silver-plated table holloware protected by lacquer |
| ISO 2361:1982 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method |
| BS EN ISO 8442-4:1998 | Materials and articles in contact with foodstuffs. Cutlery and table holloware Requirements for gold-plated cutlery |
| ISO 12683:2004 | Mechanically deposited coatings of zinc Specification and test methods |
| ISO 2082:2017 | Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel |
| UNE-EN ISO 1456:2010 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
| BS EN 13603:2013 | Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
| BS EN 2133:2010 | Aerospace series. Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys |
| BS EN 12330:2000 | Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel |
| EN 16866:2017 | Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| EN ISO 2179:2016 | Electroplated coatings of tin-nickel alloy - Specification and test methods (ISO 2179:1986) |
| EN ISO 19598:2016 | Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment (ISO 19598:2016) |
| EN ISO 4526:2004 | Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO 4526:2004) |
| EN ISO 12683:2004 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004) |
| EN 15646:2009 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| EN ISO 2361:1995 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) |
| EN 2535:2011 | Aerospace series - Vacuum deposition of cadmium |
| EN ISO 8442-3:1997 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 3: Requirements for silver-plated table and decorative holloware (ISO 8442-3:1997) |
| UNI EN ISO 27874 : 2008 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| UNI EN 2535 : 2012 | AEROSPACE SERIES - VACUUM DEPOSITION OF CADMIUM |
| DIN EN ISO 1456:2009-12 | Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009) |
| BS EN 16866:2017 | Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) |
| UNE-EN ISO 2179:2016 | Electroplated coatings of tin-nickel alloy - Specification and test methods (ISO 2179:1986) |
| I.S. EN 16866:2017 | METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST) |
| BS EN ISO 8442-2:1998 | Materials and articles in contact with foodstuffs. Cutlery and table holloware Requirements for stainless steel and silver-plated cutlery |
| BS ISO 4526 : 2004 AMD 15798 | METALLIC COATINGS - ELECTROPLATED COATINGS OF NICKEL FOR ENGINEERING PURPOSES |
| 17/30360728 DC : DRAFT MAY 2017 | BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| BS ISO 1456:2003 | Metallic coatings. Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium |
| BS ISO 22779:2006 | Metallic coatings. Physical vapour-deposited coatings of aluminium. Specification and test methods |
| I.S. EN ISO 19598:2016 | ETALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| BS ISO 4525:2003 | Metallic coatings. Electroplated coatings of nickel plus chromium on plastics materials |
| UNE-EN ISO 2081:2010 | Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2008) |
| UNI EN ISO 2081 : 2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| UNE-EN ISO 27874:2010 | Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008) |
| DIN EN ISO 19598:2015-07 (Draft) | METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| ASTM B 659 : 1990 : R2003 | Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings |
| EN ISO 9717:2017 | Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2017) |
| I.S. EN ISO 1456:2009 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF NICKEL, NICKEL PLUS CHROMIUM, COPPER PLUS NICKEL AND OF COPPER PLUS NICKEL PLUS CHROMIUM |
| ISO 27874:2008 | Metallic and other inorganic coatings — Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes — Specification and test methods |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| ISO 19598:2016 | Metallic coatings — Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment |
| DIN EN ISO 19598:2017-04 | METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC AND ZINC ALLOYS ON IRON OR STEEL WITH SUPPLEMENTARY CR(6)-FREE TREATMENT (ISO 19598:2016) |
| EN 12329 : 2000 | CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL |
| DIN EN ISO 2081:2009-05 | METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
| DIN EN ISO 4526:2004-09 | Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO 4526:2004); German version EN ISO 4526:2004 |
| DIN EN ISO 4521:2009-01 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| DIN EN ISO 6158:2011-10 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES (ISO 6158:2011) |
| DIN EN ISO 12683:2005-02 | Mechanically deposited coatings of zinc - Specification and test methods (ISO 12683:2004); German version EN ISO 12683:2004 |
| DIN EN 15646:2009-07 | ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 3882:2003 | METALLIC AND OTHER INORGANIC COATINGS - REVIEW OF METHODS OF MEASUREMENT OF THICKNESS |
| ISO 2080:2008 | Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.