ISO 20988:2007
Current
Current
The latest, up-to-date edition.
Air quality Guidelines for estimating measurement uncertainty
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
06-13-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 20988:2007 provides comprehensive guidance and specific statistical procedures for uncertainty estimation in air quality measurements including measurements of ambient air, stationary source emissions, indoor air, workplace atmospheres and meteorology. It applies the general recommendations of the Guide to the Expression of Uncertainty in Measurement (GUM) to boundary conditions met in air quality measurement. The boundary conditions considered include measurands varying rapidly in time, as well as the presence of bias in a series of observations obtained under conditions of intended use of methods of air quality measurement.
The methods of measurement considered comprise methods corrected for systematic effects by repeated observation of reference materials, methods calibrated by paired measurement with a reference method, methods not corrected for systematic effects because they are unbiased by design, and methods not corrected for systematic effects in intended use deliberately taking into account a bias.
Experimental data for uncertainty estimation can be provided either by a single experimental design in a direct approach or by a combination of different experimental designs in an indirect approach.
| DevelopmentNote |
Supersedes ISO/DIS 20988. (06/2007)
|
| DocumentType |
Standard
|
| Pages |
81
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 20988:2007-09 | Identical |
| NF EN ISO 20988 : 2007 | Identical |
| NBN EN ISO 20988 : 2007 | Identical |
| NEN EN ISO 20988 : 2007 | Identical |
| NS EN ISO 20988 : 1ED 2007 | Identical |
| I.S. EN ISO 20988:2007 | Identical |
| PN EN ISO 20988 : 2007 | Identical |
| SN EN ISO 20988 : 2007 | Identical |
| UNI EN ISO 20988 : 2007 | Identical |
| SS-EN ISO 20988:2007 | Identical |
| UNE-EN ISO 20988:2008 | Identical |
| BS EN ISO 20988:2007 | Identical |
| EN ISO 20988:2007 | Identical |
| AS/NZS ISO 20988:2024 | Identical |
| BS ISO 17211:2015 | Stationary source emissions. Sampling and determination of selenium compounds in flue gas |
| 11/30204376 DC : 0 | BS ISO 13271 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM10/PM2,5 MASS CONCENTRATION IN FLUE GAS - MEASUREMENT AT HIGHER CONCENTRATIONS BY USE OF VIRTUAL IMPACTORS |
| 15/30280916 DC : 0 | BS ISO 22262-3 - AIR QUALITY - BULK MATERIALS - PART 3: QUANTITATIVE DETERMINATION OF ASBESTOS BY X-RAY DIFFRACTION METHOD |
| BS EN ISO 25139:2011 | Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography |
| BS EN 19694-3:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Cement industry |
| I.S. EN 15853:2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF MERCURY DEPOSITION |
| BS ISO 22262-3:2016 | Air quality. Bulk materials Quantitative determination of asbestos by X-ray diffraction method |
| I.S. EN 19694-6:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 6: FERROALLOY INDUSTRY |
| DIN EN ISO 13199:2013-02 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER (ISO 13199:2012) |
| DIN EN 15853:2010-11 | Ambient air quality - Standard method for the determination of mercury deposition |
| 15/30304798 DC : 0 | BS EN 16841-1 - AMBIENT AIR - DETERMINATION OF ODOUR IN AMBIENT AIR BY USING FIELD INSPECTION - PART 1: GRID METHOD |
| 15/30314073 DC : 0 | BS 16913 - AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 |
| S.R. CEN/TS 16645:2014 | AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE |
| UNI EN ISO 21258 : 2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD |
| I.S. EN ISO 13199:2012 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER (ISO 13199:2012) |
| I.S. EN 19694-1:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
| I.S. EN 16339:2013 | AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING |
| I.S. EN 15841:2009 | AMBIENT AIR QUALITY - STANDARD METHOD FOR DETERMINATION OF ARSENIC, CADMIUM, LEAD AND NICKEL IN ATMOSPHERIC DEPOSITION |
| ISO 17179:2016 | Stationary source emissions — Determination of the mass concentration of ammonia in flue gas — Performance characteristics of automated measuring systems |
| UNI EN 15841 : 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR DETERMINATION OF ARSENIC, CADMIUM, LEAD AND NICKEL IN ATMOSPHERIC DEPOSITION |
| ISO 22262-3:2016 | Air quality Bulk materials Part 3: Quantitative determination of asbestos by X-ray diffraction method |
| BS EN 14626:2012 | Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| CEN/TS 16115-1:2011 | Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses |
| DIN EN 15549:2008-06 | Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air |
| CEN/TS 15674:2007 | Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods |
| CEN/TS 15675:2007 | Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements |
| DIN EN 16841-1:2017-03 | AMBIENT AIR - DETERMINATION OF ODOUR IN AMBIENT AIR BY USING FIELD INSPECTION - PART 1: GRID METHOD |
| NF EN ISO 25140 : 2010 | STATIONARY SOURCE EMISSIONS - AUTOMATIC METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING FLAME IONISATION DETECTION (FID) |
| DIN EN ISO 25139:2011-08 | Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011) |
| 08/30161739 DC : DRAFT MAY 2008 | BS EN ISO 11771 - AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| UNI CEN/TS 16115-1 : 2011 | AMBIENT AIR QUALITY - MEASUREMENT OF BIOAEROSOLS - PART 1: DETERMINATION OF MOULDS USING FILTER SAMPLING SYSTEMS AND CULTURE-BASED ANALYSES |
| BS EN 13284-1:2017 | Stationary source emissions. Determination of low range mass concentration of dust Manual gravimetric method |
| BS ISO 17179:2016 | Stationary source emissions. Determination of the mass concentration of ammonia in flue gas. Performance characteristics of automated measuring systems |
| 11/30207395 DC : 0 | BS ISO 13199 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOC) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED METHOD EQUIPPED WITH CATALYTIC CONVERTER |
| DD CEN/TS 16115-1:2011 | Ambient air quality. Measurement of bioaerosols Determination of moulds using filter sampling systems and culture-based analyses |
| DIN EN 15841:2010-04 | Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| BS EN 15852:2010 | Ambient air quality. Standard method for the determination of total gaseous mercury |
| 14/30303599 DC : 0 | BS EN ISO 19694-3 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY |
| BS EN ISO 25140:2010 | Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID) |
| 14/30303591 DC : 0 | BS EN ISO 19694-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
| BS EN ISO 11771:2010 | Air quality. Determination of time-averaged mass emissions and emission factors. General approach |
| DD CEN/TS 15675:2007 | Air quality. Measurement of stationary source emissions. Application of EN ISO/IEC 17025:2005 to periodic measurements |
| BS EN 16909:2017 | Ambient air. Measurement of elemental carbon (EC) and organic carbon (OC) collected on filters |
| 08/30142566 DC : DRAFT JUNE 2008 | BS EN ISO 25140 - STATIONARY SOURCE EMISSIONS - AUTOMATIC METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING FLAME IONISATION DETECTION (FID) |
| NF EN ISO 23210 : 2009 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM10/PM2,5 MASS CONCENTRATION IN FLUE GAS - MEASUREMENT AT LOW CONCENTRATIONS BY USE OF IMPACTORS |
| UNE-EN 15841:2010 | Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| UNE-EN ISO 13199:2013 | Stationary source emissions - Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes - Non-dispersive infrared analyser equipped with catalytic converter (ISO 13199:2012) |
| UNE-EN ISO 25140:2011 | Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010) |
| S.R. CEN TS 15675:2007 | AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - APPLICATION OF EN ISO/IEC 17025:2005 TO PERIODIC MEASUREMENTS |
| I.S. EN 19694-3:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 3: CEMENT INDUSTRY |
| PREN 14662-3 : DRAFT 2013 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| UNE-EN 16841-1:2017 | Ambient air - Determination of odour in ambient air by using field inspection - Part 1: Grid method |
| ASTM D 6552 : 2006 : R2016 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| S.R. CEN TS 15674:2007 | AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - GUIDELINES FOR THE ELABORATION OF STANDARDISED METHODS |
| I.S. EN 15549:2008 | AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF BENZO[A]PYRENE IN AMBIENT AIR |
| DIN EN 14625:2012-12 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| DIN EN 14211:2012-11 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| DIN EN 14626:2012-12 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| BS EN 14211:2012 | Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| I.S. EN 14211:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| I.S. EN 14625:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| I.S. EN 14626:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF CARBON MONOXIDE BY NON-DISPERSIVE INFRARED SPECTROSCOPY |
| I.S. EN 14212:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| DIN EN 16909:2017-06 | AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS |
| VDI 2100 Blatt 3:2011-10 | Determination of gaseous compounds in ambient air - Determination of indoor air pollutants - Gas chromatographic determination of organic compounds - Active sampling by accumulation on adsorbents - Thermal desorption |
| VDI 4206 Blatt 1:2010-08 | Performance criteria and test procedures for measuring devices for monitoring emissions at firing installations - Measuring devices for the determination of gaseous emissions and flue gas parameters |
| VDI 3884 Blatt 1:2015-02 | Olfactometry - Determination of odour concentration by dynamic olfactometry - Supplementary instructions for application of DIN EN 13725 |
| VDI 3786 Blatt 3:2012-10 | Environmental meteorology - Meteorologial measurements - Air temperature |
| VDI 4300 Blatt 11:2013-12 | Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM-fraction |
| VDI 4257 Blatt 1:2013-05 | Bioaerosols and biological agents - Emission measurement - Planning and performing emission measurements |
| VDI 3878:2017-09 | Stationary source emissions - Measurement of ammonia (and gaseous ammonium compounds) - Manual method |
| VDI 3478 Blatt 1:2011-03 | Biological waste gas purification - Bioscrubbers |
| VDI 3786 Blatt 1:2013-08 | Environmental meteorology - Meteorological measurements - Fundamentals |
| VDI 2267 Blatt 1:2012-10 | Determination of suspended matter in ambient air - Measurement of the element concentration after sampling on filters - Determination of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sb, Se, Sn, Tl, V and Zn by graphite furnace atomic absorption spectrometry (GF-AAS), by optical emission spectrometry with inductively coupled plasma (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS) |
| VDI 3880:2011-10 | Olfactometry - Static sampling |
| VDI 4252 Blatt 4:2017-07 (Draft) | Bioaerosols and biological agents - Determination of pollen and spores in ambient air by a volumetric method for a measurement network for allergological purposes |
| VDI 3869 Blatt 4:2012-03 | Measurement of ammonia in ambient air - Sampling with diffusive samplers - Photometric or ion chromatographic analysis |
| VDI 3794 Blatt 2:2013-07 | Determination of depositon fluxes of ambient air pollutants - Determination of the deposition flux of ammonia and ammonium compounds by means of the IRMA method |
| VDI 4320 Blatt 2:2012-01 | Measurement of atmospheric depositions - Determination of the dust deposition according to the Bergerhoff method |
| VDI 4285 Blatt 2:2011-03 | Determination of diffusive emissions by measurements - Industrial halls and livestock farming |
| VDI 4320 Blatt 3:2017-01 | Measurement of atmospheric depositions - Determination of the deposition of water-soluble anions and cations - Sampling with bulk- and wet only-collectors |
| VDI 4220:2011-04 | Quality assurance - Requirements on bodies for the determination of air pollutants at stationary sources and in ambient air |
| VDI 4320 Blatt 1:2010-01 | Measurement of atmospheric depositions - Sampling with bulk- and wet only collectors - General principles |
| VDI 2119:2013-06 | Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration |
| I.S. EN 16909:2017 | AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS |
| DIN EN 16909 E : 2017 | AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS |
| BS EN 15841:2009 | Ambient air quality. Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| 13/30272419 DC : 0 | BS EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| I.S. EN 15852:2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY |
| DIN EN 16339:2013-11 | Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
| 14/30251849 DC : 0 | BS ISO 17211 - STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF SELENIUM COMPOUNDS IN FLUE GAS |
| UNI EN ISO 23210 : 2009 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM10/PM2,5 MASS CONCENTRATION IN FLUE GAS - MEASUREMENT AT LOW CONCENTRATIONS BY USE OF IMPACTORS |
| BS EN ISO 21258:2010 | Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide (N2O). Reference method. Non-dispersive infrared method |
| DD CEN/TS 15674:2007 | Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods |
| BS EN 16913:2017 | Ambient air. Standard method for measurement of NO<sub>3</sub><sup>-</sup>, SO<sub>4</sub><sup>2-</sup>, Cl<sup>-</sup>, NH<sub>4</sub><sup>+</sup>, Na<sup>+</sup>, K<sup>+</sup>, Mg<sup>2+</sup>, Ca<sup>2+</sup> in PM2,5 as deposited on filters |
| UNE-EN ISO 17621:2016 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| 14/30303611 DC : 0 | BS EN ISO 19694-6 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 6: FERROALLOY INDUSTRY |
| UNI EN ISO 13199 : 2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED ANALYSER EQUIPPED WITH CATALYTIC CONVERTER |
| 18/30319123 DC : 0 | BS ISO 20264 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL VOLATILE ORGANIC COMPOUNDS (VOCS) IN WASTE GASES FROM NON-COMBUSTION PROCESSES |
| DIN EN ISO 17621:2015-12 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| I.S. EN ISO 23210:2009 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM[10]/PM[2,5] MASS CONCENTRATION IN FLUE GAS - MEASUREMENT AT LOW CONCENTRATIONS BY USE OF IMPACTORS |
| I.S. EN ISO 25139:2011 | STATIONARY SOURCE EMISSIONS - MANUAL METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING GAS CHROMATOGRAPHY |
| UNI EN 15852 : 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY |
| UNE-CEN/TS 16115-1:2013 | Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses |
| I.S. EN ISO 17621:2015 | WORKPLACE ATMOSPHERES - SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS - REQUIREMENTS AND TEST METHODS (ISO 17621:2015) |
| UNI EN 15853 : 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF MERCURY DEPOSITION |
| UNE-EN 16339:2014 | Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
| ASTM D 6552 : 2006 : R2011 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| UNI EN ISO 25139 : 2011 | STATIONARY SOURCE EMISSIONS - MANUAL METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING GAS CHROMATOGRAPHY |
| DIN EN 14212:2012-11 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| UNI EN 14625 : 2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| UNI EN 14626 : 2012 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF CARBON MONOXIDE BY NONDISPERSIVE INFRARED SPECTROSCOPY |
| UNI EN ISO 16911-1 : 2013 | STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD |
| UNI EN 14211 : 2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| DIN EN ISO 11771:2011-04 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| BS EN 16339:2013 | Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
| BS EN 19694-1:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries General aspects |
| DIN EN ISO 23210:2009-12 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
| 15/30289059 DC : 0 | BS ISO 17179 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF AMMONIA IN FLUE GAS - PERFORMANCE CHARACTERISTICS OF AUTOMATED MEASURING SYSTEMS |
| BS EN 19694-6:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries Ferroalloy industry |
| UNE-EN ISO 23210:2010 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
| ASTM D 6552 : 2006 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| 15/30314076 DC : 0 | BS EN 16909 - AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) DEPOSITED ON FILTERS |
| BS EN 16841-1:2016 | Ambient air. Determination of odour in ambient air by using field inspection Grid method |
| BS EN ISO 17621:2015 | Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods |
| BS EN ISO 16911-1:2013 | Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts Manual reference method |
| UNI EN 15549 : 2008 | AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF BENZO[A]PYRENE IN AMBIENT AIR |
| DIN EN ISO 25140:2010-12 | Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010) |
| UNI EN ISO 11771 : 2011 | AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| I.S. EN ISO 21258:2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF DINITROGEN MONOXIDE (N[2]O) - REFERENCE METHOD: NON-DISPERSIVE INFRARED METHOD |
| ISO/TR 14294:2011 | Workplace atmospheres Measurement of dermal exposure Principles and methods |
| DIN EN 16841-1:2015-04 (Draft) | AMBIENT AIR - DETERMINATION OF ODOUR IN AMBIENT AIR BY USING FIELD INSPECTION - PART 1: GRID METHOD |
| PREN ISO 13199 : DRAFT 2011 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF TOTAL VOLATILE ORGANIC COMPOUNDS (TVOC) IN WASTE GASES FROM NON-COMBUSTION PROCESSES - NON-DISPERSIVE INFRARED METHOD EQUIPPED WITH CATALYTIC CONVERTER |
| ISO 13271:2012 | Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors |
| I.S. EN ISO 25140:2010 | STATIONARY SOURCE EMISSIONS - AUTOMATIC METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING FLAME IONISATION DETECTION (FID) |
| ISO 25140:2010 | Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionisation detection (FID) |
| UNE-EN 14626:2013 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| ISO 16911-1:2013 | Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 1: Manual reference method |
| UNE-EN 14625:2013 | Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
| UNE-EN ISO 16911-1:2013 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
| BS EN 14625:2012 | Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
| ISO 21258:2010 | Stationary source emissions — Determination of the mass concentration of dinitrogen monoxide (N2O) — Reference method: Non-dispersive infrared method |
| ISO 25139:2011 | Stationary source emissions — Manual method for the determination of the methane concentration using gas chromatography |
| ISO 17621:2015 | Workplace atmospheres Short term detector tube measurement systems Requirements and test methods |
| ISO 11771:2010 | Air quality Determination of time-averaged mass emissions and emission factors General approach |
| ISO 23210:2009 | Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors |
| UNE-EN 14211:2013 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| ISO 13199:2012 | Stationary source emissions Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes Non-dispersive infrared analyser equipped with catalytic converter |
| UNE-EN 14212:2013 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| EN ISO 23210:2009 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
| EN ISO 13199:2012 | Stationary source emissions - Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes - Non-dispersive infrared analyser equipped with catalytic converter (ISO 13199:2012) |
| EN ISO 25140:2010 | Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010) |
| EN 19694-3:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry |
| EN ISO 21258:2010 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| EN 16841-1:2016 | Ambient air - Determination of odour in ambient air by using field inspection - Part 1: Grid method |
| EN 15852:2010 | Ambient air quality - Standard method for the determination of total gaseous mercury |
| EN 14626:2012 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| EN 15841:2009 | Ambient air quality - Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition |
| EN 19694-1:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects |
| EN 19694-6:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry |
| EN ISO 16911-1:2013 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
| EN ISO 25139:2011 | Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011) |
| EN 15853:2010 | Ambient air quality - Standard method for the determination of mercury deposition |
| EN 16339:2013 | Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling |
| EN 15549:2008 | Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air |
| EN ISO 11771:2010 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| EN 16909:2017 | Ambient air - Measurement of elemental carbon (EC) and organic carbon (OC) collected on filters |
| EN 14211:2012 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| EN 14625:2012 | Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
| DIN EN 15852:2010-11 | Ambient air quality - Standard method for the determination of total gaseous mercury |
| DIN EN ISO 21258:2010-11 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N<(Index)2>O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| PD ISO/TR 14294:2011 | Workplace atmospheres. Measurement of dermal Exposure. Principles and methods |
| UNE-EN ISO 11771:2011 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| BS EN 15549:2008 | Air quality. Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air |
| 15/30323534 DC : 0 | BS EN 13284-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 1: MANUAL GRAVIMETRIC METHOD |
| I.S. EN 16913:2017 | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| BS EN 15853:2010 | Ambient air quality. Standard method for the determination of mercury deposition |
| DIN EN ISO 16911-1:2013-06 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013); German version EN ISO 16911-1:2013 |
| UNE-EN ISO 21258:2010 | Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010) |
| UNI EN 16339 : 2013 | AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING |
| ISO 17211:2015 | Stationary source emissions Sampling and determination of selenium compounds in flue gas |
| BS EN ISO 23210:2009 | Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at low concentrations by use of impactors |
| BS EN ISO 13199:2012 | Stationary source emissions. Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes. Non-dispersive infrared analyser equipped with catalytic converter |
| BS ISO 13271:2012 | Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors |
| PD CEN/TS 16645:2014 | Ambient air. Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene |
| UNI CEN/TS 16645 : 2014 | AMBIENT AIR - METHOD FOR THE MEASUREMENT OF BENZ[A]ANTHRACENE, BENZO[B]FLUORANTHENE, BENZO[J]FLUORANTHENE, BENZO[K]FLUORANTHENE, DIBENZ[A,H]ANTHRACENE, INDENO[1,2,3-CD]PYRENE AND BENZO[GHI]PERYLENE |
| S.R. CEN TS 16115-1:2011 | AMBIENT AIR QUALITY - MEASUREMENT OF BIOAEROSOLS - PART 1: DETERMINATION OF MOULDS USING FILTER SAMPLING SYSTEMS AND CULTURE-BASED ANALYSES |
| EN 16913:2017 | Ambient air - Standard method for measurement of NO3¯, SO4²¯, Cl¯, NH4+, Na+, K+, Mg²+, Ca²+ in PM2,5 as deposited on filters |
| I.S. EN 16841-1:2016 | AMBIENT AIR - DETERMINATION OF ODOUR IN AMBIENT AIR BY USING FIELD INSPECTION - PART 1: GRID METHOD |
| DIN EN 16909:2015-10 (Draft) | AMBIENT AIR - MEASUREMENT OF ELEMENTAL CARBON (EC) AND ORGANIC CARBON (OC) COLLECTED ON FILTERS |
| I.S. EN ISO 16911-1:2013 | STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD (ISO 16911-1:2013) |
| DIN EN 16913:2015-10 (Draft) | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| UNI EN ISO 25140 : 2010 | STATIONARY SOURCE EMISSIONS - AUTOMATIC METHOD FOR THE DETERMINATION OF THE METHANE CONCENTRATION USING FLAME IONISATION DETECTION (FID) |
| UNE-EN 15853:2010 | Ambient air quality - Standard method for the determination of mercury deposition |
| I.S. EN ISO 11771:2010 | AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| I.S. EN 13284-1:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 1: MANUAL GRAVIMETRIC METHOD |
| BS EN 14212:2012 | Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| EN ISO 17621:2015 | Workplace atmospheres - Short term detector tube measurement systems - Requirements and test methods (ISO 17621:2015) |
| CEN/TS 16645:2014 | Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene |
| ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 16107:2007 | Workplace atmospheres Protocol for evaluating the performance of diffusive samplers |
| ISO 11222:2002 | Air quality — Determination of the uncertainty of the time average of air quality measurements |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.