ISO 2039-1:2001
Current
Current
The latest, up-to-date edition.
Plastics Determination of hardness Part 1: Ball indentation method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
12-06-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This part of ISO 2039 specifies a method for determining the hardness of plastics and ebonite by means of a
loaded ball indenter.
The ball indentation hardness determined by this method may provide data for research and development, quality
control and acceptance or rejection under specifications.
| DevelopmentNote |
Supersedes ISO/FDIS 2039-1 (12/2001)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 2039-1:2003 | Identical |
| NBN EN ISO 2039-1 : 2003 | Identical |
| NEN EN ISO 2039-1 : 2003 | Identical |
| NS EN ISO 2039-1 : 2ED 2003 | Identical |
| I.S. EN ISO 2039-1:2003 | Identical |
| PN EN ISO 2039-1 : 2004 | Identical |
| SN EN ISO 2039-1 : 2003 | Identical |
| UNI EN ISO 2039-1 : 2006 | Identical |
| BS EN ISO 2039-1:2003 | Identical |
| EN ISO 2039-1:2003 | Identical |
| NEN ISO 2039-1 : 1989 | Identical |
| NF ISO 2039-1 : 1994 | Identical |
| BS 2782-3.365D(1997) : 1997 | Identical |
| DIN EN ISO 2039-1:2003-06 | Identical |
| DIN ISO 2039-1:1990-09 | Identical |
| DIN EN ISO 19712-2:2013-04 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| UNI EN ISO 15015 : 2011 | PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS |
| 10/30211370 DC : DRAFT JUNE 2010 | BS ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| BS ISO 19712-3 : 2007 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| BS ISO 20753 : 2008 | PLASTICS - TEST SPECIMENS |
| UNE-EN ISO 19712-2:2013 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| DIN EN 16506:2014-12 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| 05/30137738 DC : DRAFT AUG 2005 | ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50131-2-8:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| DIN EN ISO 20753 E : 2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| DIN EN ISO 20753:2014-07 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| ASTM F 944 : 1997 | Standard Specification for Properties of Adult Alpine Ski Boots (Withdrawn 2004) |
| I.S. EN ISO 11833-1:2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| DIN EN 14598-3:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| DIN EN 14598-2:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements |
| BS EN ISO 3167:2014 | Plastics. Multipurpose test specimens |
| ISO 15015:2011 | Plastics Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) Requirements and test methods |
| ONORM EN ISO 13000-2 : 2006 | PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN ISO 5355:2006-05 | ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| DIN EN ISO 8257-2:2006-06 | PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 1337-2:2004 | Structural bearings - Part 2: Sliding elements |
| EN 50131-2-8:2016 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| EN 1337-5:2005 | Structural bearings - Part 5: Pot bearings |
| BS ISO 9523:2015 | Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods |
| 05/30132990 DC : DRAFT APR 2005 | ISO 20753 - PLASTICS - TEST SPECIMENS |
| BS EN 50131-2-8:2016 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors |
| BS ISO 19712-2 : 2007 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| 06/30147348 DC : DRAFT MAR 2006 | ISO 19712-3 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| ISO 20753:2008 | Plastics Test specimens |
| BS ISO 8257-2:1990 | Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| I.S. EN ISO 19712-2:2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007) |
| UNI EN ISO 11833-1 : 2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| UNI EN ISO 19712-3 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN ISO 14530-2:2000-08 | Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999 |
| DIN EN 1337-5:2005-07 | Structural bearings - Part 5: Pot bearings |
| BS EN ISO 14528-2:2000 | Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| BS EN 1337-5:2005 | Structural bearings Pot bearings |
| BS EN 14598-2:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements |
| BS EN 1337-2:2004 | Structural bearings Sliding elements |
| I.S. EN ISO 13000-2:2006 | PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN ISO 9523:2016-05 | TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS (ISO 9523:2015) |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN ISO 11833-1:2012-11 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| I.S. EN ISO 3167:2014 | PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
| I.S. EN ISO 8257-2:2006 | PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ONORM ISO 5355 : 2006 | ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| BS 3412:1992 | Methods of specifying general purpose polyethylene materials for moulding and extrusion |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| BS EN 16506:2014 | Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL) |
| BS EN ISO 19712-3:2013 | Plastics. Decorative solid surfacing materials Determination of properties. Solid surface shapes |
| PREN 16506 : DRAFT 2012 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| UNI EN 16506 : 2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| BS EN ISO 15015:2011 | Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods |
| 12/30274859 DC : 0 | BS ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS |
| IEC TS 62989:2018 | Primary optics for concentrator photovoltaic systems |
| 06/30137509 DC : DRAFT MAR 2006 | ISO 19712-2 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| 04/30091878 DC : DRAFT FEB 2004 | BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 15015:2011-07 | Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) |
| I.S. EN ISO 20753:2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| I.S. EN ISO 19712-3:2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| BS EN ISO 20753:2014 | Plastics. Test specimens |
| ISO 5355:2005 | Alpine ski-boots Requirements and test methods |
| ASTM D 5857 : 2017 : REDLINE | Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
| ASTM D 5936 : 1996 | Specification for Multipurpose Test Specimens (Withdrawn 1998) |
| ISO 11833-1:2012 | Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm |
| DIN EN 1337-2:2004-07 | Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004 |
| ISO 9523:2015 | Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods |
| UNE-EN ISO 11833-1:2012 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
| EN 16506:2014 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
| UNI EN ISO 3167 : 2014 | PLASTICS - MULTIPURPOSE TEST SPECIMENS |
| UNI EN 1337-2 : 2004 | STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
| ONORM EN ISO 19712-3 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
| BS EN ISO 19712-2:2013 | Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods |
| 12/30275810 DC : 0 | BS EN 16506 - SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| ONORM EN ISO 11833-1 : 2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| 07/30137506 DC : 0 | BS ISO 19712-1 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 1: CLASSIFICATION AND SPECIFICATIONS |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| BS 7825-3.3:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics |
| UNE-EN 50131-2-8:2017 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| UNI EN ISO 20753 : 2014 | PLASTICS - TEST SPECIMENS |
| I.S. EN ISO 15015:2011 | PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS |
| PREN ISO 11833-1 : DRAFT 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| EN ISO 20753:2014 | Plastics - Test specimens (ISO 20753:2008) |
| DIN EN ISO 3167:2014-11 | PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014) |
| BS EN ISO 14529-2:2000 | Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties |
| BS EN ISO 13000-2:2005 | Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Preparation of test specimens and determination of properties |
| ISO 14528-2:1999 | Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 2039-2:1987 | Plastics Determination of hardness Part 2: Rockwell hardness |
| ISO 4613-2:1995 | Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| ISO 14530-2:1999 | Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| IEC 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| ISO 8257-2:2001 | Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 14529-2:1999 | Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 2039-2:2000 | Determination of Rockwell hardness. Rockwell hardness Rockwell hardness |
| BS EN ISO 14527-2:2000 | Preparation of test specimens and determination of properties |
| BS EN ISO 8257-2:2006 | Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 14598-3:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements |
| BS EN ISO 11833-1:2012 | Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness not less than 1 mm |
| ISO 13000-2:2005 | Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| ISO 19712-3:2007 | Plastics Decorative solid surfacing materials Part 3: Determination of properties Solid surface shapes |
| ISO 14526-2:1999 | Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 19712-2:2007 | Plastics Decorative solid surfacing materials Part 2: Determination of properties Sheet goods |
| UNE-EN ISO 3167:2014 | Plastics - Multipurpose test specimens (ISO 3167:2014) |
| BS EN ISO 14526-2:2000 | Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties |
| EN ISO 8257-2:2006 | Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001) |
| EN ISO 15252-2:1999 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999) |
| EN ISO 19712-2:2013 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| EN ISO 14529-2:1999 | Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999) |
| EN ISO 2039-2:1999 | Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987) |
| EN ISO 3167:2014 | Plastics - Multipurpose test specimens (ISO 3167:2014) |
| EN ISO 14530-2:1999 | Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999) |
| EN ISO 19712-3:2013 | Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
| EN ISO 14528-2:1999 | Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999) |
| EN ISO 14526-2:1999 | Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999) |
| EN ISO 11833-1:2012 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
| EN 14598-3:2005 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| EN ISO 15015:2011 | Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN ISO 14527-2:1999 | Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF-MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999) |
| 06/30130317 DC : DRAFT JULY 2006 | ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| UNI EN ISO 19712-2 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| BS ISO 11833-1:1998 | Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics Sheets of thickness not less than 1 mm |
| UNE-EN 16506:2015 | Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
| UNE-EN ISO 19712-3:2013 | Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
| I.S. EN 16506:2014 | SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
| EN ISO 13000-2:2005 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005) |
| UNE-EN ISO 20753:2015 | Plastics - Test specimens (ISO 20753:2008) |
| BS EN 13199-3:2000 | Packaging. Small load carrier systems Bond Stackable System (BSS) |
| ISO 15252-2:1999 | Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 14631:1999 | Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods |
| ISO 14527-2:1999 | Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 14530-2:2000 | Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties |
| BS EN ISO 15252-2:2000 | Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties |
| EN 13199-3:2000 | Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS) |
| DIN EN ISO 13000-2:2006-02 | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005) |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| BS 2782-3.365C(1992) : 1992 AMD 10694 | PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.