ISO 2017-1:2005
Current
Current
The latest, up-to-date edition.
Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
02-07-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 2017-1:2005 establishes requirements to ensure the appropriate exchange of information between users, manufacturers and suppliers of vibration sources and receivers regarding the application of isolation systems. The sources and the receivers can be machines, structures, people or sensitive equipment subjected to vibrations and shocks generated by machines, railways, road traffic and other external and internal sources where the vibrations are usually transmitted through the ground to a building.
ISO 2017-1:2005 is applicable to the use of new products (source or receiver), and can also be applied to previously installed products when the user wishes to solve a newly arisen vibration problem.
| Committee |
ISO/TC 108
|
| DevelopmentNote |
Supersedes ISO/DIS 2017-1. (02/2005) Together with ISO 2017-2 supersedes ISO 2017. (03/2008)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF ISO 2017-1 : 2005 | Identical |
| SAC GB/T 30173-1 : 2013 | Identical |
| BS ISO 2017-1:2005 | Identical |
| GOST R ISO 2017-1 : 2011 | Identical |
| NEN ISO 2017-1 : 2005 | Identical |
| SS-ISO 2017-1 : 2005 | Identical |
| DIN EN 1299:2009-02 | MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION |
| BS EN ISO 10846-2:2008 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| 15/30293881 DC : 0 | BS ISO 2017-3 - MECHANICAL VIBRATION AND SHOCK - RESILIENT MOUNTING SYSTEMS - PART 3: TECHNICAL INFORMATION TO BE EXCHANGED FOR APPLICATION OF VIBRATION ISOLATION TO NEW BUILDINGS |
| BS ISO 2017-3:2015 | Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for application of vibration isolation to new buildings |
| Z412-17 | Office ergonomics — An application standard for workplace ergonomics |
| I.S. EN ISO 10846-2:2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| I.S. EN 1299:1997 | MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION |
| DIN EN ISO 10846-5:2009-07 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO 2017-3:2015 | Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings |
| ISO 10846-2:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| UNI EN ISO 10846-5 : 2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| UNI EN 1299 : 2009 | MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION |
| UNI EN ISO 10846-2 : 2008 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
| 05/30127567 DC : DRAFT JAN 2005 | ISO 20283-3 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATORY NOISE MEASUREMENT OF SHIPBOARD EQUIPMENT |
| I.S. EN ISO 10846-5:2009 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO 10846-5:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| BS EN 1299 : 1997 | MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION |
| EN ISO 10846-5:2009 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008) |
| EN ISO 10846-2:2008 | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008) |
| BS EN ISO 10846-5:2009 | Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion |
| BS ISO 20283-3 : 2006 | MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATION MEASUREMENT OF SHIPBOARD EQUIPMENT |
| ISO 20283-3:2006 | Mechanical vibration Measurement of vibration on ships Part 3: Pre-installation vibration measurement of shipboard equipment |
| DIN EN ISO 10846-2:2008-11 | ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION |
| ISO 10846-4:2003 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
| ISO 10846-3:2002 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion |
| EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 10846-1:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines |
| ISO 9688:1990 | Mechanical vibration and shock — Analytical methods of assessing shock resistance of mechanical systems — Information exchange between suppliers and users of analyses |
| ISO 10846-2:2008 | Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.