ISO 1999:2013
Current
Current
The latest, up-to-date edition.
Acoustics — Estimation of noise-induced hearing loss
Available format(s)
Hardcopy , PDF
Language(s)
Russian, English
Published date
09-23-2013
US$172.00
Excluding Tax where applicable
ISO 1999:2013 specifies a method for calculating the expected noise-induced permanent threshold shift in the hearing threshold levels of adult populations due to various levels and durations of noise exposure; it provides the basis for calculating hearing disability according to various formulae when the hearing threshold levels at commonly measured audiometric frequencies, or combinations of such frequencies, exceed a certain value.
The measure of exposure to noise for a population at risk is the noise exposure level normalized to a nominal 8 h working day, LEX,8h, for a given number of years of exposure. ISO 1999:2013 applies to noise at frequencies less than approximately 10 kHz which is steady, intermittent, fluctuating, irregular. Use of ISO 1999:2013 for sound pressures exceeding 200 Pa (140 dB relative to 20 µPa) is recognized as extrapolation.
| Committee |
ISO/TC 43
|
| DevelopmentNote |
Supersedes ISO/DIS 1999. (09/2013)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 1999:2013 | Identical |
| NEN ISO 1999 : 2016 | Identical |
| ANSI/ASA S3.44 PART 1 : 2016 | Identical |
| PN-ISO 1999:2022-12 | Identical |
| IS 7194 : 2018 | Identical |
| PN ISO 1999 : 2000 | Identical |
| NFS 31 013 : 1985 | Similar to |
| NBN ISO 1999 : 1992 | Identical |
| UNE 74023:1992 | Similar to |
| ANSI S3.28 : 86 DRAFT | EVALUATION OF THE POTENTIAL EFFECT ON HUMAN HEARING OF SOUNDS WITH PEAK-A-WEIGHTED SOUND PRESSURE LEVELS ABOVE 120 DECIBELS AND PEAK-C-WEIGHTED SOUND PRESSURE LEVELS BELOW 140 DECIBELS, |
| BS EN 16603-10-11:2014 | Space engineering. Human factors engineering |
| PD ISO/TS 16976-7:2013 | Respiratory protective devices. Human factors Hearing and speech |
| I.S. EN 415-9:2009 | SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3 |
| NFPA 130 : 2017 | FIXED GUIDEWAY TRANSIT AND PASSENGER RAIL SYSTEMS |
| BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
| EN 45510-5-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
| DIN ISO 230-5:2006-03 | Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000) |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| DGUV INFORMATION 209-023 : 2013 | |
| BS 8233:1987 | Code of practice for sound insulation and noise reduction for buildings |
| DIN EN ISO 28802:2012-06 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
| BS 6086:1981 | Method of measurement of noise inside motor vehicles |
| 15/30297064 DC : DRAFT MAY 2015 | BS ISO 7029 - ACOUSTICS - STATISTICAL DISTRIBUTION OF HEARING THRESHOLDS RELATED TO AGE AND GENDER |
| BS EN 415-9:2009 | Safety of packaging machines Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
| STANAG 2899 : 2001 | PROTECTION OF HEARING |
| I.S. EN 16603-10-11:2014 | SPACE ENGINEERING - HUMAN FACTORS ENGINEERING |
| I.S. EN ISO 9612:2009 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| ISO/TR 18569:2004 | Safety of machinery — Guidelines for the understanding and use of safety of machinery standards |
| I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| EN ISO 11690-1:1996 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996) |
| I.S. EN ISO 7029:2017 | ACOUSTICS - STATISTICAL DISTRIBUTION OF HEARING THRESHOLDS RELATED TO AGE AND GENDER (ISO 7029:2017) |
| BS 7445-1:2003 | Description and measurement of environmental noise Guide to quantities and procedures |
| BS 6739:2009 | Code of practice for instrumentation in process control systems: installation design and practice |
| DIN EN ISO 17776:2003-09 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - GUIDELINES ON TOOLS AND TECHNIQUES FOR HAZARD IDENTIFICATION AND RISK ASSESSMENT |
| VDI 3766:2012-09 | Ultrasound - Workplace - Measurement, assessment, judgement and reduction |
| DIN EN 415-9:2010-02 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
| BS ISO 15664:2001 | Acoustics. Noise control design procedures for open plant |
| BS EN ISO 9612:2009 | Acoustics. Determination of occupational noise exposure. Engineering method |
| BS EN 60215:1996 | Safety requirements for radio transmitting equipment |
| BS EN 61252 : 1997 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
| CEI UNI EN 45510-5-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
| BS EN ISO 24504:2016 | Ergonomics. Accessible design. Sound pressure levels of spoken announcements for products and public address systems |
| 07/30137110 DC : 0 | ISO 9612 - ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| 08/30136724 DC : DRAFT MAY 2008 | BS 6739 - CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS - INSTALLATION DESIGN AND PRACTICE |
| NFS 31 084 : 2002 | ACOUSTICS - METHOD FOR MEASURING NOISE EXPOSURE LEVELS IN WORK ENVIRONMENTS |
| I.S. EN ISO 28802:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE (ISO 28802:2012) |
| BS 7445-1:1991 | Description and measurement of environmental noise Guide to quantities and procedures |
| DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| ISO 9612:2009 | Acoustics — Determination of occupational noise exposure — Engineering method |
| ISO 28802:2012 | Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
| EEMUA 141 : 2014 | GUIDE TO THE USE OF EEMUA 140 NOISE PROCEDURE SPECIFICATION |
| EN 45510-5-2:1998 | Guide for procurement of power station equipment - Part 5-2: Gas turbines |
| 09/30191965 DC : 0 | BS ISO 28802 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENT OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
| ISO/TS 16976-7:2013 | Respiratory protective devices — Human factors — Part 7: Hearing and speech |
| DIN ISO 5128:1984-11 | Acoustics; measurement of noise inside motor vehicles |
| 12/30234183 DC : 0 | BS ISO 24504 - ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS |
| BS EN ISO 28802:2012 | Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
| I.S. EN ISO 24504:2016 | ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS (ISO 24504:2014) |
| SAE J1166_201409 | Sound Measurement—Off-Road Self-Propelled Work Machines Operator-Work Cycle |
| BS 3863:1979 | Guide for gas turbines procurement |
| ISO 1996-1:2016 | Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures |
| IEC 60215:2016 | Safety requirements for radio transmitting equipment - General requirements and terminology |
| ISO 7029:2017 | Acoustics — Statistical distribution of hearing thresholds related to age and gender |
| IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| BS EN ISO 7029:2017 | Acoustics. Statistical distribution of hearing thresholds related to age and gender |
| BS EN 45510-5-2:1998 | Guide for the procurement of power station equipment Gas turbines |
| BS EN ISO 11690-1:1997 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control strategies |
| 00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
| ISO 24504:2014 | Ergonomics — Accessible design — Sound pressure levels of spoken announcements for products and public address systems |
| IEC 61252:1993+AMD1:2000+AMD2:2017 CSV | Electroacoustics - Specifications for personal sound exposure meters |
| EN 61252:1995/A2:2017 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS (IEC 61252:1993/A2:2017) |
| EN ISO 7029:2017 | Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017) |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN ISO 28802:2012 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
| EN ISO 9612:2009 | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009) |
| EN ISO 24504:2016 | Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems (ISO 24504:2014) |
| EN 16603-10-11:2014 | Space engineering - Human factors engineering |
| EN 415-9:2009 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
| DIN EN ISO 9612:2009-09 | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009) |
| NF EN 45510 5-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: TURBINES - GAS TURBINES |
| I.S. EN 61252:1996 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
| I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| ISO 11690-1:1996 | Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 1: Noise control strategies |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
| ISO 5128:1980 | Acoustics — Measurement of noise inside motor vehicles |
| UNE-EN 415-9:2010 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
| ONORM EN ISO 9612 : 2009 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| UNE-EN ISO 7029:2017 | Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017) |
| BS 6402(1994) : 1994 AMD 9323 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
| BS 3192(1990) : 1990 AMD 9197 | SPECIFICATION FOR SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT |
| BS 3192(1996) : 1996 | SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT |
| ISO 11466:1995 | Soil quality — Extraction of trace elements soluble in aqua regia |
| ISO/TR 25417:2007 | Acoustics — Definitions of basic quantities and terms |
| ISO 389-1:1998 | Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones |
| ISO 8253-1:2010 | Acoustics — Audiometric test methods — Part 1: Pure-tone air and bone conduction audiometry |
| ISO 9612:2009 | Acoustics — Determination of occupational noise exposure — Engineering method |
| ISO 389-2:1994 | Acoustics — Reference zero for the calibration of audiometric equipment — Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 7029:2017 | Acoustics — Statistical distribution of hearing thresholds related to age and gender |
| AS ISO 7029:2019 | Acoustics - Statistical distribution of hearing thresholds related to age and gender |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.