ISO 19372:2015
Current
Current
The latest, up-to-date edition.
Microturbines applications — Safety
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
02-13-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 19372:2015 covers the safety requirements for industrial, commercial, and residential automated stationary microturbine (micro gas turbine) engine generator assemblies with an individual system or subsystem output rating with nominal supply voltages not exceeding 1 000 V for alternating current (A.C.) and not exceeding 1 500 V for direct current (D.C.), 500 kW per individual unit/subsystem or less that are intended for installation and use in ordinary and hazardous location using liquid or gaseous fuels and the safety related control and detection systems and essential auxiliaries for all types of open cycles, closed-cycle, and semi-closed (simple, combined, regenerative, reheat, etc.) used in onshore and offshore applications including floating production platforms.
| Committee |
ISO/TC 192
|
| DevelopmentNote |
Supersedes ISO/DIS 19372. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
89
|
| ProductNote |
THIS STANDARD ALSO REFERS TO EN 14461
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NEN ISO 19372 : 2015 | Identical |
| BS ISO 19372:2015 | Identical |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| AGMA 6023 : A | DESIGN MANUAL FOR ENCLOSED EPICYCLIC GEAR DRIVES |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| ISO 12499:1999 | Industrial fans Mechanical safety of fans Guarding |
| ISO 14691:2008 | Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| NFPA 2001 : 2015 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| ISO 9972:2015 | Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method |
| IEC 60068-2-18:2017 | Environmental testing - Part 2-18: Tests - Test R and guidance: Water |
| AGMA 6011 : I | SPECIFICATION FOR HIGH SPEED HELICAL GEAR UNITS |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV | Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements |
| ISO 6183:2009 | Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation |
| IEC TR 60079-20:1996 | Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
| IEC 60034-22:2009 | Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
| IEC 60695-1-1:1999 | Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| IEC 60079-19:2010+AMD1:2015 CSV | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| ISO 3977-1:1997 | Gas turbines — Procurement — Part 1: General introduction and definitions |
| IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 11086:1996 | Gas turbines — Vocabulary |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 13478:2001+A1:2008 | Safety of machinery - Fire prevention and protection |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| UL 2200:2ED 2012-06-01 | Standard for Stationary Engine Generator Assemblies |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| ISO 3977-9:1999 | Gas turbines — Procurement — Part 9: Reliability, availability, maintainability and safety |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ANSI B11 : 2008 | GENERAL SAFETY REQUIREMENTS COMMON TO ANSI B11 MACHINES |
| ISO 14123-1:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers |
| ISO 16010:2005 | Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| IEC TR 61000-5-2:1997 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| IEC 60730-2-14:2017 | Automatic electrical controls - Part 2-14: Particular requirements for electric actuators |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| IEC 62305-1:2010 | Protection against lightning - Part 1: General principles |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| ISO/TR 13387-7:1999 | Fire safety engineering Part 7: Detection, activation and suppression |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| NFPA 68 : 2013 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| EN 626-2:1996+A1:2008 | Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
| IEC 61511-3:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| CEN/TS 14816:2008 | Fixed firefighting systems - Water spray systems - Design, installation and maintenance |
| IEC 60079-29-2:2015 RLV | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 15156-1:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| ISO 14520-1:2015 | Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 3864-3:2012 | Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs |
| ISO 10441:2007 | Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 13732-3:2005 | Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces |
| ISO 3977-3:2004 | Gas turbines — Procurement — Part 3: Design requirements |
| IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV | Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 1838:2013 | Lighting applications - Emergency lighting |
| ISO 10494:1993 | Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method |
| ISO 19353:2015 | Safety of machinery Fire prevention and fire protection |
| IEC TR 61000-5-1:1996 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.