ISO 187:1990
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
10-18-2022
Superseded by
Language(s)
English, French
Published date
12-13-1990
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies the standard atmosphere for conditioning and testing pulp, paper, and board, and also the procedures for measuring the temperature and relative humidity. For the conditioning of laboratory prepared handsheets in accordance with ISO 5269-1, the standard atmosphere is that defined in this standard, but the procedure is different. Annex A covers the measurement of temperature and relative humidity. Annex B (informative) describes the interdependence of temperature and relative humidity. This second edition cancels and replaces the first edition (1977) which has been technically revised.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST R ISO 187 : 2012 | Identical |
| NEN ISO 187 : 1994 | Identical |
| NS ISO 187 : 1ED 1993 | Identical |
| I.S. EN 20187:1994 | Identical |
| PN EN 20187 : 2000 | Identical |
| SN EN 20187 : 1994 | Identical |
| BIS IS 1060-4-1 : 2014 | Identical |
| UNE-EN 20187:1994 | Identical |
| BS EN 20187:1993 | Identical |
| EN 20187:1993 | Identical |
| DIN EN 20187:1993-11 | Identical |
| NF EN 20187 : 1993 | Identical |
| ONORM EN 20187 : 1994 | Identical |
| UNE 57001:1986 | Identical |
| BS EN ISO 12625-15:2015 | Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
| DIN ISO 16260:2016-10 (Draft) | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| NF ISO 2493-1 : 2011 | PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION |
| DIN ISO 9961:1994-03 | DRAUGHTING MEDIA FOR TECHNICAL DRAWINGS - NATURAL TRACING PAPER |
| ISO 9895:2008 | Paper and board — Compressive strength — Short-span test |
| I.S. EN ISO 12625-12:2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| BS ISO 20494:2017 | Paper. Requirements for stability for general graphic applications |
| 03/309374 DC : DRAFT JUNE 2003 | ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| 15/30302582 DC : 0 | BS ISO 5631-1 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES) |
| 16/30325728 DC : 0 | BS ISO 9416 - PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY) |
| 09/30201918 DC : 0 | BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
| 14/30287209 DC : 0 | BS ISO 11476 - PAPER AND BOARD - DETERMINATION OF CIE-WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) |
| NF ISO 16532-3 : 2010 | PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS |
| NF ISO 20369 : 2010 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
| 15/30325867 DC : 0 | BS EN 868-3 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| 07/30164326 DC : 0 | BS ISO 16532-1 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 1: GREASE PERMEABILITY METHOD |
| 11/30247446 DC : 0 | BS EN ISO 12625-11 - TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
| EN 12130:1998 | Feather and down - Test methods - Determination of the filling power (massic volume) |
| 09/30210529 DC : 0 | BS ISO 12625-13 - TISSUE PAPER AND TISSUE PRODUCTS - PART 13: DETERMINATION OF THE SPECTRAL REFLECTANCE FACTOR (BRIGHTNESS) AT THE WAVELENGTH R 457 NM WITH AND WITHOUT UV STIMULUS AND OPACITY |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| ISO 2493:1992 | Paper and board Determination of resistance to bending |
| ISO 11605:1995 | Paper and board Calibration of variable-area flowmeters |
| ISO 13821:2002 | Corrugated fibreboard Determination of edgewise crush resistance Waxed edge method |
| DIN 53113:1990-06 | DETERMINING THE BURSTING STRENGTH OF PAPER |
| NF EN 60332-1-3 : 2005 AMD 1 2015 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES |
| ISO 5269-3:2008 | Pulps — Preparation of laboratory sheets for physical testing — Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system |
| ISO 5629:2017 | Paper and board — Determination of bending stiffness — Resonance method |
| BS ISO 3781:2011 | Paper and board. Determination of tensile strength after immersion in water |
| ISO 12192:2011 | Paper and board — Determination of compressive strength — Ring crush method |
| BS ISO 16260:2016 | Paper and board. Determination of internal bond strength |
| ISO 16532-3:2010 | Paper and board — Determination of grease resistance — Part 3: Turpentine test for voids in glassine and greaseproof papers |
| UNI ISO 11108 : 2011 | INFORMATION AND DOCUMENTATION - ARCHIVAL PAPER - REQUIREMENTS FOR PERMANENCE AND DURABILITY |
| DIN ISO 16260 E : 2017 | PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH (ISO 16260:2016) |
| BS ISO 11556:2005 | Paper and board. Determination of curl using a single vertically suspended test piece |
| 00/562030 DC : DRAFT MAY 2000 | ISO 17190-6 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 6: GRAVIMETRIC DETERMINATION OF FLUID RETENTION CAPACITY IN SALINE AFTER CENTRIFUGATION |
| DIN ISO 11476:2017-10 | PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, C/2 DEGREES (INDOOR ILLUMINATION CONDITIONS) (ISO 11476:2016) |
| ISO 2834-3:2008 | Graphic technology Laboratory preparation of test prints Part 3: Screen printing inks |
| DIN ISO 15592-2:2005-05 | Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing (ISO 15592-2:2001) |
| 06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| BS ISO 2470-2:2008 | Paper, board and pulps. Measurement of diffuse blue reflectance factor Outdoor daylight conditions (D65 brightness) |
| ISO 8791-3:2017 | Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method |
| 16/30325457 DC : 0 | BS ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD |
| BS ISO 5269-1 : 1998 AMD 13456 | PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - CONVENTIONAL SHEET-FORMER METHOD |
| BS ISO 3783:2006 | Paper and board. Determination of resistance to picking. Accelerated speed method using the IGT-type tester (electric model) |
| DIN ISO 3039:2011-06 | Corrugated fibreboard - Determination of grammage of the component papers after separation (ISO 3039:2010) |
| 12/30242237 DC : 0 | BS ISO 8791-2 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD |
| BS ISO 16945:2014 | Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
| 07/30162477 DC : 0 | BS ISO 5269-3 - PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 3: CONVENTIONAL AND RAPID-KOETHEN SHEET FORMERS USING A CLOSED WATER SYSTEM |
| DIN ISO 1924-3:2007-06 | Paper and board - Determination of tensile properties - Part 3: Constant rate of elongation method (100 mm/min) (ISO 1924-3:2005) |
| 10/30202469 DC : 0 | BS ISO 12192 - PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD |
| 13/30230645 DC : 0 | BS ISO 16260 - PAPER AND BOARD - DETERMINATION OF INTERNAL BOND STRENGTH |
| DD ENV 12625-2:1999 | Tissue paper and tissue products Procedures for sampling and conditioning |
| AAMI ISO 11140-4 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| BS ISO 15592-2:2001 | Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis Atmosphere for conditioning and testing |
| UNI ISO 5636-5 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| BS ISO 14968:1999 | Paper and board. Cut-size office paper. Measurement of curl in a pack of sheets |
| 09/30173892 DC : 0 | BS ISO 16532-3 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 3: TURPENTINE TEST FOR VOIDS IN GLASSINE AND GREASEPROOF PAPERS |
| CAN/CSA-Z5100-17 | Cellulose nanomaterials - Test methods for characterization |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| ISO/TS 17958:2013 | Paper and board — Determination of fracture toughness — Constant rate of elongation method (1,7 mm/s) |
| BS EN 12131:1998 | Feather and down. Test methods. Determination of the quantitive composition of feather and down (manual method) |
| ISO 22414:2004 | Paper — Cut-size office paper — Measurement of edge quality |
| I.S. EN ISO 1974:2012 | PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD (ISO 1974:2012) |
| I.S. EN ISO 217:2013 | PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION (ISO 217:2013) |
| I.S. EN ISO 3035:2011 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE (ISO 3035:2011) |
| ISO 2528:2017 | Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method |
| DIN EN ISO 12625-11:2013-04 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| ISO 11476:2016 | Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions) |
| ISO 19594:2017 | Graphic technology Test method for the determination of the binding strength for perfect-bound products Page-pull test working upwards |
| ISO 11140-5:2007 | Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
| ISO 14968:1999 | Paper and board Cut-size office paper Measurement of curl in a pack of sheets |
| UNE-EN ISO 12625-16:2015 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| ISO 3039:2010 | Corrugated fibreboard Determination of grammage of the component papers after separation |
| UNE-ISO 8787:2012 | Paper and board. Determination of capillary rise. Klemm method |
| ISO 2493-2:2011 | Paper and board Determination of bending resistance Part 2: Taber-type tester |
| ISO 3037:2013 | Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method) |
| ISO 12625-7:2014 | Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight) |
| EN ISO 12625-7:2014 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| DIN EN ISO 11140-4:2007-07 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| DIN EN ISO 11140-3:2009-09 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| UNE-EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| BS EN 867-5:2001 | Non-biological systems for use in sterilizers Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S |
| ISO 2759:2014 | Board — Determination of bursting strength |
| BS EN ISO 5270:2012 | Pulps. Laboratory sheets. Determination of physical properties |
| UNE-EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| BS EN ISO 8254-1:2009 | Paper and board. Measurement of specular gloss 75 degree gloss with a converging beam, TAPPI method |
| UNE-EN ISO 12625-7:2015 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| BS EN 868-3:2017 | Packaging for terminally sterilized medical devices Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods |
| BS EN ISO 8254-2:2003 | Paper and board. Measurement of specular gloss 75° gloss with a parallel beam, DIN method |
| UNE-EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| BS EN 1164:1999 | Feather and down. Test methods. Determination of the turbidity of an aqueous extract |
| BS EN ISO 12625-4:2016 | Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| BS EN 12132-2:1999 | Feather and down. Methods of testing the down-proof properties of fabrics Impact test |
| BS EN ISO 2759:2014 | Board. Determination of bursting strength |
| I.S. EN ISO 12625-9:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
| EN 12281:2002 | Printing and business paper - Requirements for copy paper for dry toner imaging processes |
| DIN EN 868-2:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| ONORM EN ISO 12625-7 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014) |
| DIN ISO 5630-5:2017-03 | Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 ?C (ISO 5630-5:2008) |
| EN ISO 12625-5:2016 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| DIN EN ISO 217:2013-12 | PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION (ISO 217:2013) |
| EN 12283:2002 | Printing and business paper - Determination of toner adhesion |
| EN 1163:1996 | Feather and down - Test methods - Determination of the oil and fat content |
| EN 13543:2001 | Manufactured articles filled with feather and down - Measurement of water absorption of filling material |
| EN ISO 12625-6:2016 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| EN 1167:1996 | Feather and down - Method of test for measuring the sizes of quilts filled with feather and/or down |
| DIN EN ISO 534:2012-02 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| EN 13186:2004 | Feather and down - Specification for feather and down filled bedding articles |
| EN ISO 12625-4:2016 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| EN 1165:1996 | Feather and down - Test methods - Determination of water-soluble chlorides |
| EN 12149:1997 | Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release |
| EN 13542:2001 | Manufactured articles filled with feather and down - Method for determining the compressibility index of clothing |
| BS EN ISO 291:2008 | Plastics. Standard atmospheres for conditioning and testing |
| NF EN ISO 216 : 2007 | WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION |
| ONORM EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| ONORM EN ISO 535 : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| ONORM EN ISO 3037 : 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013) |
| UNE-EN ISO 217:2013 | Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013) |
| 13/30272957 DC : 0 | BS EN ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
| BS ISO 8791-3:2017 | Paper and board. Determination of roughness/smoothness (air leak methods) Sheffield method |
| 07/30130569 DC : 0 | BS ISO 22754 - PULP AND PAPER - DETERMINATION OF THE EFFECTIVE RESIDUAL INK CONCENTRATION (ERIC NUMBER) BY INFRARED REFLECTANCE MEASUREMENT |
| ISO 3783:2006 | Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model) |
| ISO 17190-8:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 8: Gravimetric determination of flowrate |
| BS EN ISO 217:2013 | Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges, and indication of machine direction |
| BS ISO 13821:2001 | Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method |
| ISO 1924-3:2005 | Paper and board Determination of tensile properties Part 3: Constant rate of elongation method (100 mm/min) |
| 15/30274545 DC : 0 | BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES |
| 12/30196194 DC : 0 | BS ISO 5636-5 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 5: GURLEY METHOD |
| BS ISO 5626:1993 | Paper. Determination of folding endurance |
| ISO 16945:2014 | Corrugating medium — Determination of the edge crush resistance after laboratory fluting |
| UNE-ISO 2965:2011 | Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone -- Determination of air permeability |
| 15/30323949 DC : 0 | BS EN ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT MAXIMUM FORCE AND TENSILE ENERGY ABSORPTION |
| 15/30323953 DC : 0 | BS EN ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
| BS ISO 16532-3:2010 | Paper and board. Determination of grease resistance Turpentine test for voids in glassine and greaseproof papers |
| DIN EN ISO 3035:2012-02 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| I.S. EN 11140-4:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| BS ISO 15361:2000 | Pulps. Determination of zero-span tensile strength, wet or dry |
| NF EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| ISO 5630-5:2008 | Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C |
| 07/30166924 DC : DRAFT AUG 2007 | BS EN 868-2 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 1974:2012 | Paper. Determination of tearing resistance. Elmendorf method |
| BS ISO 11108:1996 | Information and documentation. Archival paper. Requirements for permanence and durability |
| PREN 868-7 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 12625-12:2010 | Tissue paper and tissue products Determination of tensile strength of perforated lines. Calculation of perforation efficiency |
| BS EN ISO 12625-16:2015 | Tissue paper and tissue products Determination of optical properties. Opacity (paper backing). Diffuse reflectance method |
| BS ISO 16762:2016 | Graphic technology. Post-press. General requirements for transfer, handling and storage |
| I.S. EN ISO 535:2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| DIN ISO 2965:2012-07 | Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability - Determination of air permeability (ISO 2965:2009) |
| UNE-ISO 15754:2012 | Paper and board - Determination of z-directional tensile strength |
| UNE-ISO 12192:2017 | Paper and board. Determination of compressive strength. Ring crush method |
| BS ISO 11476:2010 | Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions) |
| 10/30202472 DC : 0 | BS ISO 3035 - CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
| 00/562033 DC : DRAFT MAY 2000 | ISO 17190-9 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 9: GRAVIMETRIC DETERMINATION OF DENSITY |
| 16/30309800 DC : 0 | BS ISO 12647-7 - GRAPHIC TECHNOLOGY - PROCESS CONTROL FOR THE PRODUCTION OF HALF-TONE COLOUR SEPARATIONS, PROOF AND PRODUCTION PRINTS - PART 7: PROOFING PROCESSES WORKING DIRECTLY FROM DIGITAL DATA |
| 08/30182464 DC : DRAFT JUNE 2008 | BS ISO 20370 - MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
| BS ISO 12192:2011 | Paper and board. Determination of compressive strength. Ring crush method |
| BS ISO 5636-4:2013 | Paper and board. Determination of air permeance (medium range) Sheffield method |
| BS ISO 16532-2:2007 | Paper and board. Determination of grease resistance Surface repellency test |
| DIN EN ISO 535:2014-06 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
| NF ISO 2493-2 : 2011 | PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 2: TABER-TYPE TESTER |
| BS ISO 5636-3:2013 | Paper and board. Determination of air permeance (medium range) Bendtsen method |
| 05/30094664 DC : DRAFT JAN 2005 | ISO 216 - WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES |
| 00/562035 DC : DRAFT MAY 2000 | ISO 17190-11 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISATION - PART 11: DETERMINATION OF CONTENT OF RESPIRABLE PARTICLES |
| 09/30181245 DC : 0 | BS ISO 3039 - CORRUGATED FIBREBOARD - DETERMINATION OF GRAMMAGE OF THE COMPONENT PAPERS AFTER SEPARATION |
| 12/30252903 DC : 0 | BS ISO 15397 - GRAPHIC TECHNOLOGY - COMMUNICATION OF GRAPHIC PAPER PROPERTIES |
| ISO 15359:1999 | Paper and board Determination of the static and kinetic coefficients of friction Horizontal plane method |
| AAMI ISO 11140-5 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
| 03/316095 DC : DRAFT OCT 2003 | BS ISO 1924-3 - PAPER AND BOARD - TENSILE STRENGTH, STRAIN AT BREAK, TENSILE ENERGY ABSORPTION AND TENSILE STIFFNESS - PART 3: CONSTANT RATE OF ELONGATION METHOD (100 MM/MIN) |
| 03/310719 DC : DRAFT JUNE 2003 | ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
| ISO 8791-4:2007 | Paper and board Determination of roughness/smoothness (air leak methods) Part 4: Print-surf method |
| ISO 1924-1:1992 | Paper and board Determination of tensile properties Part 1: Constant rate of loading method |
| 03/305959 DC : DRAFT MAY 2003 | EN 60332-1-3 ED. 1 - TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/ PARTICLES |
| 06/30144858 DC : DRAFT JAN 2006 | ISO 2965 - MATERIALS USED AS CIGARETTE PAPERS, FILTER PLUG WRAP AND FILTER JOINING PAPER, INCLUDING MATERIALS HAVING AN ORIENTED PERMEABLE ZONE - DETERMINATION OF AIR PERMEABILITY |
| AAMI ISO 11140-4 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| I.S. EN ISO 7263:2011 | CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| ISO 17190-1:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 1: Determination of pH |
| UNI CEN/TS 15968 : 2010 | Determination of extractable perfluoro octane sulfonate (PFOS) in solid, coated and impregnated articles, in liquids and fire-fighting foams - Method for sampling, extraction and analysis by means of LC-qMS or LC-MS |
| ISO 9416:2017 | Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| UNE-ISO 5636-3:2015 | Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method |
| BS 1248-3:1990 | Wallcoverings in roll form Specification for wallcoverings for subsequent decoration |
| BS ISO 5628:2012 | Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods |
| I.S. EN ISO 12625-16:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
| ISO 5631-3:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees) |
| ISO 2493-1:2010 | Paper and board Determination of bending resistance Part 1: Constant rate of deflection |
| ISO 16260:2016 | Paper and board — Determination of internal bond strength |
| UNI EN ISO 12625-11 : 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH |
| PREN 868-3 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| EN ISO 12625-11:2012 | Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
| EN 13088:2001 | Manufactured articles filled with feather and down - Method for the determination of a filled product's total mass and of the mass of the filling |
| ISO 12625-3:2014 | Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk |
| DIN EN 13186:2005-02 | Feather and down - Specification for feather and down filled bedding articles; German version EN 13186:2004 |
| UNE-EN ISO 3037:2013 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| UNE-EN ISO 536:2013 | Paper and board - Determination of grammage (ISO 536:2012) |
| BS EN 13855-1:2003 | Manufactured articles solely filled with feathers and down. Measurement of thickness and compressibility of cushions Test method by rotation |
| BS EN ISO 12625-5:2016 | Tissue paper and tissue products Determination of wet tensile strength |
| BS EN ISO 2758:2014 | Paper. Determination of bursting strength |
| BS EN 868-7:2017 | Packaging for terminally sterilized medical devices Adhesive coated paper for low temperature sterilization processes. Requirements and test methods |
| UNE-EN ISO 5270:2013 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| DIN EN 14035-24:2004-11 | FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
| I.S. EN ISO 12625-3:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK (ISO 12625-3:2014) |
| DIN EN 14035-25:2006-01 | FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
| I.S. EN ISO 12625-7:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014) |
| I.S. EN 868-3:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11140-3:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| I.S. EN 868-7:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 291:2008 | PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| I.S. EN ISO 5269-2:2005 | PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 2: RAPID-KOTHEN METHOD |
| DIN EN 14035-8:2004-11 | FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-7:2004-11 | FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
| I.S. EN ISO 12625-5:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH (ISO 12625-5:2016) |
| DIN 53107:1982-05 | DETERMINING THE SMOOTHNESS OF PAPER AND BOARD BY THE BEKK METHOD |
| DIN 55468-1:1999-03 | CORRUGATED FIBREBOARD - PART 1: REQUIREMENTS AND TESTING |
| I.S. EN ISO 12625-8:2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER-ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD |
| I.S. EN ISO 1924-2:2009 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| I.S. EN 868-6:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 3037:2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO 3037:2013) |
| I.S. EN ISO 8254-2:2016 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 2: 75 DEGREE GLOSS WITH A PARALLEL BEAM, DIN METHOD (ISO 8254-2:2016) |
| I.S. EN ISO 12625-6:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMGE |
| I.S. EN ISO 2758:2014 | PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
| I.S. EN ISO 2759:2014 | BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
| DIN EN 14035-29:2004-11 | FIREWORKS - PART 29: SERPENTS - SPECIFICATION AND TEST METHODS |
| I.S. EN ISO 5270:2012 | PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES (ISO 5270:2012) |
| I.S. EN ISO 5269-1:2005 | PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 1: CONVENTIONAL SHEET-FORMER METHOD |
| I.S. EN ISO 216:2007 | WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION |
| I.S. EN ISO 8254-1:2009 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| I.S. EN ISO 534:2011 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME (ISO 534:2011) |
| I.S. EN ISO 12625-4:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| UNI ISO 16532-1 : 2009 | PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 1: PERMEABILITY TEST |
| ONORM EN ISO 5270 : 2013 | PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES (ISO 5270:2012) |
| BS 3631:1984 | Method for determination of ash of paper and board |
| ONORM EN ISO 12625-15 : 2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| BS 5743:2000 | Tobacco and tobacco products. Atmosphere for conditioning and testing |
| ISO 15754:2009 | Paper and board Determination of z-directional tensile strength |
| BS ISO 5636-5:2013 | Paper and board. Determination of air permeance (medium range) Gurley method |
| DIN EN ISO 535 E : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD (ISO 535:2014) |
| NF ISO 20370 : 2009 | MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF ACETATE CONTENT |
| ISO 8254-3:2016 | Paper and board Measurement of specular gloss Part 3: 20 degree gloss with a converging beam, TAPPI method |
| 06/30159524 DC : 0 | BS EN ISO 12625-10 - TISSUE PAPER AND TISSUE PRODUCTS - PART 10: DETERMINATION OF DEMAND WATER ABSORPTION RATE AND CAPACITY, UNDER CONTROLLED HYDRAULIC PRESSURE |
| DIN EN ISO 1974:2012-09 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| UNI ISO 2471 : 2009 | PAPER AND BOARD - DETERMINATION OF OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD |
| I.S. EN 14035-25:2005 | FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
| 16/30330102 DC : 0 | BS ISO 16762 - GRAPHIC TECHNOLOGY - POST PRESS - GENERAL REQUIREMENTS FOR TRANSFER, HANDLING AND STORAGE |
| I.S. EN ISO 12625-11:2012 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| BS ISO 5636-6:2015 | Paper and board. Determination of air permeance (medium range) Oken method |
| 14/30294441 DC : 0 | BS ISO 2834-2 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 2: LIQUID PRINTING INKS |
| BS ISO 2759 : 2001 AMD 14673 | BOARD - DETERMINATION OF BURSTING STRENGTH |
| 00/562025 DC : DRAFT MAY 2000 | ISO 17190-1 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 1: DETERMINATION OF PH |
| BS 4415-2:1986 | Determination of the tensile properties of paper and board Constant rate of elongation method |
| ISO 16532-2:2007 | Paper and board Determination of grease resistance Part 2: Surface repellency test |
| ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
| 11/30216364 DC : 0 | BS EN ISO 1974 - PAPER - DETERMINATION OF TEARING RESISTANCE (ELMENDORF METHOD) |
| BS 6388-3:1987 | Accelerated ageing of paper and board Method for moist heat treatment at 80°C and 65% relative humidity |
| BS ISO 9416:2017 | Paper. Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| BS ISO 11093-2:1994 | Paper and board. Testing of cores Co-ordinating of test samples |
| PD ISO/TS 17958:2013 | Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s) |
| UNI EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| ISO 8787:1986 | Paper and board — Determination of capillary rise — Klemm method |
| NF ISO 3034 : 2011 | CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS |
| BS ISO 5631-2:2015 | Paper and board. Determination of colour by diffuse reflectance Outdoor daylight conditions (D65/10°) |
| BS ISO 11605:1995 | Paper and board. Calibration of variable-area flowmeters |
| 08/30130536 DC : DRAFT MAR 2008 | BS ISO 2470-1 - PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 1: INDOOR DAYLIGHT CONDITIONS (ISO BRIGHTNESS) |
| 10/30204991 DC : 0 | BS ISO 534 - PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME |
| 15/30323163 DC : 0 | BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| BS ISO 15359:1999 | Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method |
| 15/30323957 DC : 0 | BS EN ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE |
| BS ISO 2493-2:2011 | Paper and board. Determination of bending resistance Taber-type tester |
| 12/30213199 DC : 0 | BS ISO 5636-3 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
| 09/30190545 DC : 0 | BS ISO 2493-1 - PAPER AND BOARD - DETERMINATION OF BENDING RESISTANCE - PART 1: CONSTANT RATE OF DEFLECTION |
| DIN ISO 20370:2012-10 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content (ISO 20370:2009) |
| 00/562031 DC : DRAFT MAY 2000 | ISO 17190-7 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 7: GRAVIMETRIC DETERMINATION OF ABSORPTION UNDER PRESSURE |
| 08/30182461 DC : DRAFT JUNE 2008 | BS ISO 20369 - MATERIAL USED FOR PRODUCING WRAPPINGS FOR CIGARETTE FILTERS, CIGARETTES AND OTHER TOBACCO PRODUCTS - DETERMINATION OF CITRATE CONTENT |
| BS ISO 15397:2014 | Graphic technology. Communication of graphic paper properties |
| 03/309339 DC : DRAFT JUNE 2003 | ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| BS ISO 4046-5:2016 | Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board |
| DIN ISO 5630-6:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) (ISO 5630-6:2009) |
| 08/30183287 DC : DRAFT JUNE 2008 | BS ISO 12625-12 - TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| UNE-EN ISO 3035:2012 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| 07/30130545 DC : 0 | BS ISO 8254-1 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| BS ISO 20369:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of citrate content |
| BS ISO 12634:2017 | Graphic technology. Determination of tack of paste inks and vehicles by a rotary tackmeter |
| BS ISO 11140-5:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators for Bowie and Dick-type air removal tests |
| BS ISO 19594:2017 | Graphic technology. Test method for the determination of the binding strength for perfect-bound products. Page-pull test working upwards |
| BS ISO 5630-7:2014 | Paper and board. Accelerated ageing Exposure to light |
| 10/30196197 DC : 0 | BS ISO 2493-2 - PAPER AND BOARD - DETERMINATION OF RESISTANCE TO BENDING - PART 2:TABER-TYPE TESTER |
| ISO 13820:2014 | Paper, board and corrugated fibreboard Description and calibration of compression-testing equipment |
| BS ISO 3039:2010 | Corrugated fibreboard. Determination of grammage of the component papers after separation |
| BS ISO 22414:2004 | Paper. Cut-size office paper. Measurement of edge quality |
| UNE-ISO 5631-2:2015 | Paper and board. Determination of colour by diffuse relfectance. Part 2: Outdoor daylight conditions (D65/10º) |
| UNE-ISO 3039:2013 | Corrugated fibreboard. Determination of the grammage of the component papers after separation |
| AAMI ISO 11140-5 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 5: CLASS 2 INDICATORS FOR BOWIE AND DICK-TYPE AIR REMOVAL TESTS |
| ISO 11556:2005 | Paper and board — Determination of curl using a single vertically suspended test piece |
| PREN ISO 3037 : DRAFT 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) (ISO/FDIS 3037:2013) |
| ASTM D 7680 : 2010 | Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester |
| DIN ISO 15754:2010-04 | Paper and board - Determination of z-directional tensile strength (ISO 15754:2009) |
| ISO 5630-7:2014 | Paper and board — Accelerated ageing — Part 7: Exposure to light |
| ISO 8791-2:2013 | Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method |
| UNI EN ISO 1974 : 2012 | PAPER - DETERMINATION OF TEARING RESISTANCE - ELMENDORF METHOD |
| ISO 17190-5:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 5: Gravimetric determination of free swell capacity in saline solution |
| ONORM EN ISO 12625-11 : 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
| ISO 5636-4:2013 | Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method |
| ISO 15397:2014 | Graphic technology — Communication of graphic paper properties |
| ISO/TS 20460:2015 | Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
| BS ISO 2470-1:2016 | Paper, board and pulps. Measurement of diffuse blue reflectance factor Indoor daylight conditions (ISO brightness) |
| BS EN 12130:1998 | Feather and down. Test methods. Determination of the filling power (massic volume) |
| UNI EN ISO 535 : 2014 | PAPER AND BOARD - DETERMINATION OF WATER ABSORPTIVENESS - COBB METHOD |
| BS ISO 8254-3:2016 | Paper and board. Measurement of specular gloss 20° gloss with a converging beam, TAPPI method |
| ISO 16532-1:2008 | Paper and board — Determination of grease resistance — Part 1: Permeability test |
| ISO 17190-6:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 6: Gravimetric determination of fluid retention capacity in saline solution after centrifugation |
| BS 6427-1:1983 | Conditioning of sacks for testing. Method for conditioning paper sacks |
| PREN 868-2 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| UNI ISO 2470-2 : 2010 | PAPER, BOARD AND PULPS - MEASUREMENT OF DIFFUSE BLUE REFLECTANCE FACTOR - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65 BRIGHTNESS) |
| NF EN ISO 3035 : 2011 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
| ISO 5631-1:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees) |
| ISO 2470-1:2016 | Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness) |
| ISO 7263:2011 | Corrugating medium Determination of the flat crush resistance after laboratory fluting |
| DIN EN ISO 536:2012-11 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| DIN EN ISO 7263:2011-05 | CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| DIN EN ISO 9706:2010-02 | Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
| BS EN 14035-25:2005 | Fireworks Party poppers. Specification and test methods |
| UNE-EN ISO 8254-2:2016 | Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016) |
| ISO 11140-3:2007 | Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| BS EN 259:1997 | Wallcoverings in roll form. Specification for heavy duty wallcoverings |
| BS EN 20534:1993 | Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board |
| BS EN 13542:2001 | Manufactured articles filled with feather and down. Method for determining the compressibility index of clothing |
| BS EN ISO 12625-8:2010 | Tissue paper and tissue products Water-absorption time and water-absorption capacity, basket-immersion test method |
| BS EN 12149:1998 | Wallcoverings in roll form. Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release |
| BS EN 14035-7:2004 | Fireworks Bengal matches. Specification and test methods |
| BS EN 12956:1999 | Wallcoverings in roll form. Determination of dimensions, straightness, spongeability and washability |
| BS EN ISO 5269-2:2004 | Pulps. Preparation of laboratory sheets for physical testing Rapid-Koethen method |
| BS EN 13186:2004 | Feather and down. Specification feather and down filled bedding articles |
| BS EN 12281:2002 | Printing and business paper. Requirements for copy paper for dry toner imaging processes |
| UNE-EN 60332-1-3:2005 | Tests on electric and optical fibre cables under fire conditions -- Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles |
| UNE-EN ISO 12625-8:2011 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
| EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| EN ISO 8254-2:2016 | Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016) |
| ENV 12625-2 : DRAFT 1999 | TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING |
| UNI EN ISO 7263 : 2011 | CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| UNI EN ISO 5270 : 2012 | PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES |
| UNI EN ISO 11140-3 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| UNI EN ISO 12625-8 : 2011 | TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER-ABSORPTION TIME AND WATER- ABSORPTION CAPACITY, BASKET-IMMERSION TEST METHOD |
| BS 5381-4:1998 | Methods for determination of physical properties of tobacco and tobacco products Determination of air permeability of materials used as cigarette papers, filter plug wrap and filter joining paper |
| UNI EN ISO 12625-7 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREES (OUTDOOR DAYLIGHT) |
| UNI EN ISO 1924-2 : 2009 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| UNI EN ISO 2758 : 2014 | PAPER - DETERMINATION OF BURSTING STRENGTH |
| UNI EN ISO 8254-1 : 2009 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| UNI EN ISO 534 : 2012 | PAPER AND BOARD - DETERMINATION OF THICKNESS, DENSITY AND SPECIFIC VOLUME |
| UNI EN ISO 291 : 2008 | PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| UNI EN ISO 3037 : 2013 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| UNI EN ISO 2759 : 2014 | BOARD - DETERMINATION OF BURSTING STRENGTH |
| UNI EN ISO 12625-3 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY AND BULK |
| 03/309373 DC : DRAFT JUNE 2003 | ISO 12625-3 - TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY |
| UNE-ISO 9416:2011 | Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| DIN EN ISO 12625-15:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| UNI ISO 5636-4 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| 11/30240486 DC : 0 | BS EN 16256-5 - PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
| BS ISO 2493-1:2010 | Paper and board. Determination of bending resistance Constant rate of deflection |
| 15/30325855 DC : 0 | BS EN 868-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| DIN ISO 3781:2012-07 | Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011) |
| ISO 12634:2017 | Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter |
| 00/562029 DC : DRAFT MAY 2000 | ISO 17190-5 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 5: GRAVIMETRIC DETERMINATION OF FREE SWELL CAPACITY IN SALINE |
| 07/30128549 DC : 0 | BS ISO 2834-3 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 3: SCREEN PRINTING INKS |
| PD ISO/TR 12705:2011 | Graphic technology. Laboratory test method for chemical ghosting in lithography |
| PD 6577:1995 | The influence of environmental conditions on the testing of textile materials |
| 03/319401 DC : DRAFT NOV 2003 | BS EN 14035-25 - FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
| ISO 3034:2011 | Corrugated fibreboard — Determination of single sheet thickness |
| BS ISO 20370:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of acetate content |
| PD CEN/TS 15968:2010 | Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams. Method for sampling, extraction and analysis by LCqMS or LC-tandem/MS |
| 06/30145155 DC : DRAFT JAN 2006 | ISO 16532-2 - PAPER AND BOARD - DETERMINATION OF GREASE RESISTANCE - PART 2: SURFACE REPELLENCY TEST |
| BS ISO 2758 : 2001 AMD 14672 | PAPER - DETERMINATION OF BURSTING STRENGTH |
| 13/30277424 DC : 0 | BS EN ISO 3037 - CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| 07/30140460 DC : 0 | BS ISO 9416 - PAPER - DETERMINATION OF LIGHT SCATTERING AND ABSORPTION COEFFICIENTS (USING KUBELKA-MUNK THEORY) |
| UNI ISO 5636-3 : 2014 | PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 3: BENDTSEN METHOD |
| 00/562032 DC : DRAFT MAY 2000 | ISO 17190-8 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 8: GRAVIMETRIC DETERMINATION OF FLOWRATE |
| 11/30239244 DC : 0 | BS EN ISO 12625-7 - TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR |
| 04/30118282 DC : DRAFT AUG 2004 | EN ISO 12625-8 - TISSUE PAPER AND TISSUE PRODUCTS - PART 8: WATER ABSORPTION TIME AND RESIDUAL WATER ABSORPTION CAPACITY, MANUAL AND AUTOMATED BASKET IMMERSION TEST METHOD |
| UNE-ISO 5636-5:2015 | Paper and board. Determination of air permeance (medium range). Part 5: Gurley method |
| BS ISO 15754:2009 | Paper and board. Determination of z-directional tensile strength |
| BS ISO 5630-5:2008 | Paper and board. Accelerated ageing Exposure to elevated temperature at 100 °C |
| BS ISO 8791-2:2013 | Paper and board. Determination of roughness/smoothness (air leak methods) Bendtsen method |
| 07/30165293 DC : 0 | BS EN ISO 7263 - CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| 04/30089096 DC : DRAFT APR 2004 | BS EN ISO 291 - PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| 10/30205404 DC : 0 | BS ISO 5628 - PAPER AND BOARD - DETERMINATION OF BENDING STIFFNESS - GENERAL PRINCIPLES FOR TWO-POINT, THREE-POINT AND FOUR-POINT METHODS |
| DIN ISO 5630-5:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 5: EXPOSURE TO ELEVATED TEMPERATURE AT 100 DEGREES C (ISO 5630-5:2008) |
| 15/30294424 DC : 0 | BS ISO 12634 - GRAPHIC TECHNOLOGY - DETERMINATION OF TACK OF PASTE INKS AND VEHICLES BY A ROTARY TACKMETER |
| BS ISO 5631-1:2015 | Paper and board. Determination of colour by diffuse reflectance Indoor daylight conditions (C/2°) |
| 13/30283973 DC : 0 | BS EN ISO 12625-15 - TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT |
| BS ISO 5269-3:2008 | Pulps. Preparation of laboratory sheets for physical testing Conventional and Rapid-Köthen sheet formers using a closed water system |
| 06/30158432 DC : 0 | BS ISO 2834-2 - GRAPHIC TECHNOLOGY - LABORATORY PREPARATION TEST PRINTS - PART 2: LIQUID PRINTING INKS |
| 03/310721 DC : DRAFT JUNE 2003 | ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH |
| 15/30311310 DC : 0 | BS ISO 5631-3 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 DEGREES) |
| 15/30311307 DC : 0 | BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES) |
| DIN ISO 5630-4:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
| 12/30196191 DC : 0 | BS ISO 5636-4 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE (MEDIUM RANGE) - PART 4: SHEFFIELD METHOD |
| 16/30328581 DC : 0 | BS ISO 19594 - GRAPHIC TECHNOLOGY - TEST METHODS FOR THE DETERMINATION OF THE BINDING STRENGTH FOR PERFECT BOUND PRODUCTS - PAGE PULL TEST WORKING UPWARDS |
| 01/121198 DC : DRAFT MAR 2001 | BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREES GLOSS |
| PREN 868-6 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS ISO/IEC 15457-3:2008 | Identification cards. Thin flexible cards Test methods |
| BS ISO 5631-3:2015 | Paper and board. Determination of colour by diffuse reflectance Indoor illumination conditions (D50/2°) |
| BS ISO 12647-7:2016 | Graphic technology. Process control for the production of halftone colour separations, proof and production prints Proofing processes working directly from digital data |
| 13/30286354 DC : 0 | BS EN ISO 12625-9 - TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH |
| ISO 20494:2017 | Paper — Requirements for stability for general graphic applications |
| 03/306710 DC : DRAFT APR 2003 | ISO 8791-3 - PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 3: SHEFFIELD METHOD |
| 07/30166936 DC : DRAFT AUG 2007 | BS EN 868-6 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR THE MANUFACTURE OF STERILE BARRIER SYSTEMS INTENDED FOR STERILIZATION BY LOW TEMPERATURE STERILIZATION PROCESSES OR IRRADIATION - REQUIREMENTS AND TEST METHODS |
| UNE-ISO 2493-2:2014 | Paper and board. Determination of resistance to bending. Part 2: Taber-type tester |
| NF ISO 5628 : 2012 | PAPER AND BOARD - DETERMINATION OF BENDING STIFFNESS - GENERAL PRINCIPLES FOR TWO-POINT, THREE-POINT AND FOUR-POINT METHODS |
| BS ISO 5270:1998 | Pulps. Laboratory sheets. Determination of physical properties |
| AAMI ISO 11140-3 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| BS ISO 13820:2014 | Paper, board and corrugated fibreboard. Description and calibration of compression-testing equipment |
| BS ISO 5269-2 : 1998 AMD 13429 | PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - RAPID-KOETHEN METHOD |
| UNE-ISO 16945:2015 | Corrugating medium. Determination of the edge crush resistance after laboratory fluting |
| UNE-EN ISO 12625-11:2013 | Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2012) |
| ISO 11093-2:1994 | Paper and board — Testing of cores — Part 2: Conditioning of test samples |
| ISO 5631-2:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) |
| INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| AAMI ISO 11140-3 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 3: CLASS 2 INDICATOR SYSTEMS FOR USE IN THE BOWIE AND DICK-TYPE STEAM PENETRATION TEST |
| DIN ISO 5630-7:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 7: EXPOSURE TO LIGHT (ISO 5630-7:2014) |
| ISO 5630-6:2009 | Paper and board Accelerated ageing Part 6: Exposure to atmospheric pollution (nitrogen dioxide) |
| ISO 17190-2:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 2: Determination of amount of residual monomers |
| UNE-ISO 15592-2:2012 | Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing |
| DIN ISO 20369:2012-10 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content (ISO 20369:2009) |
| 03/309336 DC : DRAFT JUNE 2003 | ISO 22414 - PAPER - CUT-SIZE OFFICE PAPER - MEASUREMENT OF EDGE QUALITY |
| BS ISO 5629:2017 | Paper and board. Determination of bending stiffness. Resonance method |
| INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| UNI EN ISO 217 : 2013 | PAPER - UNTRIMMED SIZES - DESIGNATION AND TOLERANCES FOR PRIMARY AND SUPPLEMENTARY RANGES, AND INDICATION OF MACHINE DIRECTION |
| ISO 2470-2:2008 | Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness) |
| BS 1248-1:1990 | Wallcoverings in roll form Terms and symbols |
| ASTM D 685 : 2017 : REDLINE | Standard Practice for Conditioning Paper and Paper Products for Testing |
| ISO 4046-5:2002 | Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board |
| S.R. CEN TS 15968:2010 | DETERMINATION OF EXTRACTABLE PERFLUOROOCTANESULPHONATE (PFOS) IN COATED AND IMPREGNATED SOLID ARTICLES, LIQUIDS AND FIRE FIGHTING FOAMS - METHOD FOR SAMPLING, EXTRACTION AND ANALYSIS BY LC-QMS OR LC-TANDEM/MS |
| PD EN 14035-18:2004 | Fireworks Hand-held fountains. Specification and test methods |
| ISO 12647-7:2016 | Graphic technology Process control for the production of halftone colour separations, proof and production prints Part 7: Proofing processes working directly from digital data |
| ISO 16762:2016 | Graphic technology Post-press General requirements for transfer, handling and storage |
| ISO 5636-6:2015 | Paper and board Determination of air permeance (medium range) Part 6: Oken method |
| ISO 10549:2000 | Micrographics A6 size aperture cards |
| ISO 17190-9:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 9: Gravimetric determination of density |
| ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
| EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
| DIN EN ISO 12625-9:2015-05 | TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
| DIN EN ISO 3037:2013-12 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| DIN EN ISO 5270:2013-02 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| DIN EN 868-6:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 2759:2014-10 | Board - Determination of bursting strength (ISO 2759:2014) |
| DIN EN ISO 12625-8:2011-04 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
| DIN EN ISO 12625-3:2014-09 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014) |
| DIN EN ISO 2758:2014-12 | PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2014) |
| DIN EN ISO 12625-7:2014-08 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10? (outdoor daylight) (ISO 12625-7:2014) |
| ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
| UNE-EN ISO 12625-4:2017 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| BS EN ISO 11140-4:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| BS EN ISO 3037:2013 | Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method) |
| BS EN 868-2:2017 | Packaging for terminally sterilized medical devices Sterilization wrap. Requirements and test methods |
| BS EN ISO 12625-3:2014 | Tissue paper and tissue products Determination of thickness, bulking thickness and apparent bulk density and bulk |
| BS EN ISO 536:2012 | Paper and board. Determination of grammage |
| ISO 535:2014 | Paper and board — Determination of water absorptiveness — Cobb method |
| BS EN 14035-29:2004 | Fireworks Serpents. Specification and test methods |
| ISO 12625-12:2010 | Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency |
| BS EN ISO 12625-9:2005 | Tissue paper and tissue products Determination of ball burst strength |
| ISO 12625-8:2010 | Tissue paper and tissue products Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method |
| ISO 1974:2012 | Paper — Determination of tearing resistance — Elmendorf method |
| UNI EN ISO 536 : 2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
| UNE-ISO 2493-1:2014 | Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection |
| BS EN ISO 534:2011 | Paper and board. Determination of thickness, density and specific volume |
| BS EN ISO 5269-1:2005 | Pulps. Preparation of laboratory sheets for physical testing Conventional sheet-former method |
| BS EN 867-4:2001 | Non-biological systems for use in sterilizers Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
| BS EN ISO 12625-6:2016 | Tissue paper and tissue products Determination of grammage |
| BS EN 14086:2003 | Paper and board. Measurement of specular gloss. 45° gloss with a parallel beam, DIN method |
| BS EN ISO 9706:2000 | Information and documentation. Paper for documents. Requirements for permanence |
| UNE-EN ISO 12625-5:2017 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| BS EN ISO 216:2001 | Writing paper and certain classes of printed matter. Trimmed sizes. A and B series |
| ISO 9706:1994 | Information and documentation — Paper for documents — Requirements for permanence |
| ISO 12625-16:2015 | Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method |
| DIN EN ISO 216:2007-12 | WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION |
| BS EN 14035-34:2003 | Fireworks Table bombs. Specification and test methods |
| BS EN 14035-19:2003 | Fireworks Hand-held sparklers. Specification and test methods |
| BS EN 13855-2:2003 | Manufactured articles solely filled with feathers and down. Measurement of thickness and compressibility of cushions Test method by oscillation |
| BS EN ISO 7263:2011 | Corrugating medium. Determination of the flat crush resistance after laboratory fluting |
| ISO 5269-2:2004 | Pulps — Preparation of laboratory sheets for physical testing — Part 2: Rapid-Köthen method |
| ISO 8254-1:2009 | Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method |
| UNE-EN ISO 534:2012 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| UNE-EN ISO 12625-3:2015 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| UNE-EN ISO 12625-9:2015 | Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015) |
| BS EN 14035-24:2004 | Fireworks Novelty matches. Specification and test methods |
| BS EN 14035-23:2003 | Fireworks Non-hand-held sparklers. Specification and test methods |
| ISO 5269-1:2005 | Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method |
| ISO 5270:2012 | Pulps — Laboratory sheets — Determination of physical properties |
| BS EN ISO 12625-7:2014 | Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight) |
| ISO 8254-2:2016 | Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN method |
| ISO 216:2007 | Writing paper and certain classes of printed matter Trimmed sizes A and B series, and indication of machine direction |
| UNE-EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| ISO 2758:2014 | Paper Determination of bursting strength |
| BS EN ISO 1924-2:2008 | Paper and board. Determination of tensile properties Constant rate of elongation method (20 mm/min) |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 12625-9:2015 | Tissue paper and tissue products Part 9: Determination of ball burst strength |
| UNE-EN ISO 12625-6:2017 | Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016) |
| ISO 217:2013 | Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction |
| UNE-EN ISO 2759:2014 | Board - Determination of bursting strength (ISO 2759:2014) |
| BS EN 14035-15:2003 | Fireworks Fountains. Specification and test methods |
| UNE-ISO 3781:2015 | Paper and board - Determination of tensile strength after inmersion in water |
| ISO 12625-4:2016 | Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| ONORM EN ISO 536 : 2013 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| BS EN 868-6:2017 | Packaging for terminally sterilized medical devices Paper for low temperature sterilization processes. Requirements and test methods |
| ISO 6599-1:1983 | Packaging — Sacks — Conditioning for testing — Part 1: Paper sacks |
| EN 14035-29:2004 | Fireworks - Part 29: Serpents - Specification and test methods |
| EN ISO 5269-2:2004 | Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Köthen method (ISO 5269-2:2004) |
| EN ISO 217:2013 | Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013) |
| EN ISO 535:2014 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) |
| EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| EN 14035-7:2004 | Fireworks - Part 7: Bengal matches - Specification and test methods |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| EN ISO 1974:2012 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| EN ISO 12625-16:2015 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| EN ISO 534:2011 | Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) |
| EN 14035-25:2005 | Fireworks - Part 25: Party Poppers - Specification and test methods |
| EN ISO 11140-4:2007 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| EN 14035-24:2004 | Fireworks - Part 24: Novelty matches - Specification and test methods |
| EN ISO 11140-3:2009 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007, including Cor 1:2007) |
| EN ISO 3035:2011 | Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011) |
| EN ISO 2759:2014 | Board - Determination of bursting strength (ISO 2759:2014) |
| EN 14086:2003 | Paper and board - Measurement of specular gloss - 45° gloss with a parallel beam, DIN method |
| EN 26599-1:1992 | Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:1983) |
| EN ISO 12625-8:2010 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010) |
| EN ISO 12625-9:2015 | Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015) |
| EN ISO 12625-12:2010 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| EN ISO 7263:2011 | Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011) |
| EN ISO 12625-15:2015 | Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
| EN ISO 5270:2012 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| EN ISO 1924-2:2008 | Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008) |
| EN ISO 3037:2013 | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2013) |
| EN 13855-1:2003 | Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation |
| EN 259:1991/AC:1997 | WALL COVERINGS IN ROLL FORM - SPECIFICATION FOR HEAVY DUTY WALL COVERINGS |
| EN ISO 9706:1998 | Information and documentation - Paper for documents - Requirements for permanence (ISO 9706:1994) |
| EN 14035-18:2004 | Fireworks - Part 18: Hand-held fountains - Specification and test methods |
| EN ISO 8254-1:2009 | Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009) |
| EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| EN ISO 5269-1:2005 | Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005) |
| BS ISO 9895:2008 | Paper and board. Compressive strength. Short-span test |
| BS ISO 2834-2:2015 | Graphic technology. Laboratory preparation test prints Liquid printing inks |
| UNE-EN ISO 12625-12:2010 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| 13/30247449 DC : 0 | BS ISO 16945 - CORRUGATING MEDIUM - DETERMINATION OF THE EDGE CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| UNE-ISO 2470-1:2012 | Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness) |
| 03/310720 DC : DRAFT JUNE 2003 | ISO 12625-6 - TISSUE PAPER AND TISSUE PRODUCTS - PART 6: DETERMINATION OF GRAMMAGE |
| BS ISO 18522:2016 | Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles |
| ISO 17190-7:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 7: Gravimetric determination of absorption under pressure |
| 03/319402 DC : DRAFT NOV 2003 | BS EN 14035-26 - FIREWORKS - PART 26: PERCUSSION CAPS - SPECIFICATION AND TEST METHODS |
| BS ISO 3034:2011 | Corrugated fibreboard. Determination of single sheet thickness |
| 17/30323191 DC : DRAFT JAN 2017 | BS ISO 20494 - PAPER - REQUIREMENTS FOR STABILITY FOR GENERAL, GRAPHIC APPLICATIONS |
| NF ISO 12192 : 2011 | PAPER AND BOARD - DETERMINATION OF COMPRESSIVE STRENGTH - RING CRUSH METHOD |
| 07/30140452 DC : 0 | BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES) |
| I.S. EN 14035-18:2005 | FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
| DIN EN ISO 12625-16:2015-05 | Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015) |
| 14/30219261 DC : 0 | BS ISO 5636-6 - PAPER AND BOARD - DETERMINATION OF AIR PERMEANCE AND AIR RESISTANCE (MEDIUM RANGE) - PART 6: OKEN METHOD |
| 00/562026 DC : DRAFT MAY 2000 | ISO 17190-2 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 2: DETERMINATION OF AMOUNT OF RESIDUAL MONOMER |
| PD ISO/TS 20460:2015 | Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
| 13/30283977 DC : 0 | BS EN ISO 12625-16 - TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE FACTOR |
| BS ISO 1924-3:2005 | Paper and board. Determination of tensile properties Constant rate of elongation method (100 mm/min) |
| DIN EN ISO 12625-12:2010-05 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| 07/30140456 DC : 0 | BS ISO 5631-3 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 3: INDOOR ILLUMINATION CONDITIONS (D50/2 ) |
| 11/30241890 DC : 0 | BS EN 16261-3 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 3: TEST METHODS |
| DIN ISO 3034:2016-08 | CORRUGATED FIBREBOARD - DETERMINATION OF SINGLE SHEET THICKNESS (ISO 3034:2011) |
| ISO/TR 12705:2011 | Graphic technology Laboratory test method for chemical ghosting in lithography |
| 15/30325864 DC : 0 | BS EN 868-7 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS ISO 2834-3:2008 | Graphic technology. Laboratory preparation of test prints Screen printing inks |
| PREN ISO 12625-3 : DRAFT 2013 | TISSUE PAPER AND TISSUE PRODUCTS - PART 3: DETERMINATION OF THICKNESS, BULKING THICKNESS AND APPARENT BULK DENSITY (ISO/DIS 12625-3:2013) |
| BS ISO 16532-1:2008 | Paper and board. Determination of grease resistance Permeability test |
| ISO 17190-10:2001 | Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 10: Determination of extractable polymer content by potentiometric titration |
| BS ISO 5630-6:2009 | Paper and board. Accelerated ageing Exposure to atmospheric pollution (nitrogen dioxide) |
| UNI EN ISO 3035 : 2012 | CORRUGATED FIBREBOARD - DETERMINATION OF FLAT CRUSH RESISTANCE |
| BS EN ISO 535:2014 | Paper and board. Determination of water absorptiveness. Cobb method |
| BS ISO 2471:1998 | Paper and board. Determination of opacity (paper backing). Diffuse reflectance method |
| BS ISO 8791-4:2007 | Paper and board. Determination of roughness/smoothness (air leak methods) Print-surf method |
| 00/562034 DC : DRAFT MAY 2000 | ISO 17190-10 - POLYMER-BASED ABSORBENT MATERIALS - MEASUREMENT OF CHARACTERISTICS - PART 10: DETERMINATION OF EXTRACTABLE POLYMER CONTENT BY POTENTIOMETRIC TITRATION |
| UNE-ISO 15359:2014 | Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method |
| 15/30325858 DC : 0 | BS EN 868-6 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| 15/30302564 DC : 0 | BS ISO 8254-3 - PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 3: 20 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| BS EN ISO 12625-11:2012 | Tissue paper and tissue products Determination of wet ball burst strength |
| 07/30166927 DC : DRAFT AUG 2007 | BS EN 868-3 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-7:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| 03/310738 DC : DRAFT JULY 2003 | EN 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| UNI ISO 8791-2 : 2014 | PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) - PART 2: BENDTSEN METHOD |
| NF ISO 2965 : 2009 | MATERIALS USED AS CIGARETTE PAPERS, FILTER PLUG WRAP AND FILTER JOINING PAPER, INCLUDING MATERIALS HAVING A DISCRETE OR ORIENTED PERMEABLE ZONE AND MATERIALS WITH BANDS OF DIFFERING PERMEABILITY - DETERMINATION OF AIR PERMEABILITY |
| BS ISO 2528:2017 | Sheet materials. Determination of water vapour transmission rate (WVTR). Gravimetric (dish) method |
| 08/30181295 DC : DRAFT APR 2008 | BS ISO 5631-1 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 1: INDOOR DAYLIGHT CONDITIONS (C/2 DEGREES) |
| BS ISO 9706 : 94 AMD 10518 | INFORMATION AND DOCUMENTATION - PAPER FOR DOCUMENTS - REQUIREMENTS FOR PERMANENCE |
| 07/30122297 DC : 0 | BS ISO 15754 - PAPER AND BOARD - DETERMINATION OF Z-DIRECTIONAL TENSILE STRENGTH |
| BS EN ISO 3035:2011 | Corrugated fibreboard. Determination of flat crush resistance |
| BS ISO 8254-1 : 99 AMD 14259 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1 - 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| BS ISO 536 : 1995 AMD 9309 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE |
| 01/648266 DC : DRAFT MAY 2001 | ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| 09/30193349 DC : DRAFT FEB 2009 | BS ISO 11476 - PAPER AND BOARD - DETERMINATION OF CIE-WHITENESS, C/2 DEGREE (INDOOR ILLUMINATION CONDITIONS) |
| CSA ISO/IEC 15457-3 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| CSA Z5100/Z5200 PACKAGE : 2017 | CONSISTS OF Z5100-17, CELLULOSE NANOMATERIALS - TEST METHODS FOR CHARACTERIZATION AND Z5200-17, CELLULOSE NANOMATERIALS - BLANK DETAIL SPECIFICATION |
| ISO 17190-11:2001 | Urine-absorbing aids for incontinence — Test methods for characterizing polymer-based absorbent materials — Part 11: Determination of content of respirable particles |
| UNE-ISO 3036:2013 | Board. Determination of puncture resistance. |
| TAPPI/ANSI T 402 sp:2013 | STANDARD CONDITIONING AND TESTING ATMOSPHERES FOR PAPER, BOARD, PULP HANDSHEETS, AND RELATED PRODUCTS |
| UNE-EN ISO 1974:2013 | Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012) |
| I.S. EN ISO 12625-15:2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 15: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH C/2 DEGREES (INDOOR DAYLIGHT) ILLUMINANT (ISO 12625-15:2015) |
| UNI ISO 9895 : 2009 | PAPER AND BOARD - COMPRESSIVE STRENGTH - SHORT-SPAN TEST |
| ISO 5636-5:2013 | Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method |
| ONORM EN ISO 7263 : 2011 | CORRUGATING MEDIUM - DETERMINATION OF THE FLAT CRUSH RESISTANCE AFTER LABORATORY FLUTING |
| UNE-ISO 11093-2:2015 | Paper and board. Testing of cores. Part 2: Conditioning of test samples |
| ISO 2965:2009 | Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability Determination of air permeability |
| ISO 20370:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products Determination of acetate content |
| ISO 11108:1996 | Information and documentation — Archival paper — Requirements for permanence and durability |
| NF EN 14225-3 : 2005 | DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT (SYSTEMS) - REQUIREMENTS AND TEST METHODS |
| ISO 2834-2:2015 | Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks |
| UNE-ISO 5631-1:2015 | Paper and board. Determination of colour by diffuse reflectance. Part 1: Indoor daylight conditions (C/2º) |
| UNE-ISO 16532-3:2017 | Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers |
| BS ISO 2965:2009 | Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability. Determination of air permeability |
| UNE-EN ISO 12625-15:2015 | Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015) |
| NF ISO 5630-6 : 2009 | PAPER AND BOARD - ACCELERATED AGEING - PART 6: EXPOSURE TO ATMOSPHERIC POLLUTION (NITROGEN DIOXIDE) |
| UNE-ISO 2834-3:2013 | Graphic technology -- Laboratory preparation of test prints -- Part 3: Screen printing inks |
| ISO 8226-1:1994 | Paper and board Measurement of hygroexpansivity Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % |
| I.S. ENV 12625-2:1999 | TISSUE PAPER AND TISSUE PRODUCTS - PART 2: PROCEDURES FOR SAMPLING AND CONDITIONING |
| ISO 20369:2009 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products Determination of citrate content |
| I.S. EN 13088:2001 | MANUFACTURED ARTICLES FILLED WITH FEATHER AND DOWN - METHOD FOR THE DETERMINATION OF A FILLED PRODUCT'S TOTAL MASS AND OF THE MASS OF THE FILLING |
| ISO 15361:2000 | Pulps Determination of zero-span tensile strength, wet or dry |
| I.S. EN ISO 536:2012 | PAPER AND BOARD - DETERMINATION OF GRAMMAGE (ISO 536:2012) |
| DIN EN ISO 1924-2:2009-05 | PAPER AND BOARD - DETERMINATION OF TENSILE PROPERTIES - PART 2: CONSTANT RATE OF ELONGATION METHOD (20 MM/MIN) |
| DIN EN 868-3:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-2:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| BS EN 13543:2001 | Manufactured articles filled with feather and down. Measurement of water absorption of filling material |
| BS EN ISO 11140-3:2009 | Sterilization of health care products. Chemical indicators Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| UNE-EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| BS EN 20535:1994 | Paper and board. Determination of water absorptiveness. Cobb method |
| BS EN 12283:2002 | Printing and business paper. Determination of toner adhesion |
| ISO 12625-6:2016 | Tissue paper and tissue products Part 6: Determination of grammage |
| ISO 12625-5:2016 | Tissue paper and tissue products — Part 5: Determination of wet tensile strength |
| BS EN 12858:1999 | Paper. Printing and business paper. Requirements for continuous stationery |
| BS EN 868-1:1997 | Packaging materials and systems for medical devices which are to be sterilized General requirements and test methods |
| BS EN 644:1999 | Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances, expression of direction of manufacture |
| BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
| BS EN 12132-1:1999 | Feather and down. Methods of testing the down-proof properties of fabrics Rubbing test |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO 12625-15:2015 | Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant |
| ISO 3035:2011 | Corrugated fibreboard — Determination of flat crush resistance |
| EN 1162:1996 | Feather and down - Test methods - Determination of the oxygen index number |
| DIN EN 868-3:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN ISO 5630-4:2017-03 | PAPER AND BOARD - ACCELERATED AGEING - PART 4: DRY HEAT TREATMENT AT 120 OR 150 DEGREES C (ISO 5630-4:1986) |
| CEN/TS 15968:2010 | Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS |
| EN ISO 216:2007 | Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction (ISO 216:2007) |
| DIN ISO 5630-6:2017-03 | Paper and board - Accelerated ageing - Part 6: Exposure to atmospheric pollution (nitrogen dioxide) (ISO 5630-6:2009) |
| DIN EN ISO 8254-1:2009-09 | PAPER AND BOARD - MEASUREMENT OF SPECULAR GLOSS - PART 1: 75 DEGREE GLOSS WITH A CONVERGING BEAM, TAPPI METHOD |
| EN 1164:1998 | Feather and down - Test methods - Determination of the turbidity of an aqueous extract |
| DIN EN ISO 2759:2003-11 | BOARD - DETERMINATION OF BURSTING STRENGTH (ISO 2759:2014) |
| EN ISO 12625-3:2014 | Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) |
| DIN EN 868-6:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 5269-2:2005-03 | Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Koethen method (ISO 5269-2:2004) |
| DIN EN ISO 5269-1:2005-05 | Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005) |
| DIN ISO 8791-4:2008-05 | Paper and board - Determination of roughness/smoothness (air leak methods) - Part 4: Print-surf method (ISO 8791-4:2007) |
| DIN ISO 5630-7:2017-03 | Paper and board - Accelerated ageing - Part 7: Exposure to light (ISO 5630-7:2014) |
| DIN EN ISO 291:2008-08 | PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| CAN/CSA-ISO 11140-3:18 | Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (Adopted ISO 11140-3:2007, second edition, 2007-03-15, including technical corrigendum 1:2007) |
| BS 6036(1995) : 1995 AMD 9160 | CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD) |
| BS 4419:1980 | Methods for determination of folding endurance of paper |
| CAN/CSA-ISO 11140-4:18 | CAN/CSA-ISO 11140-4:18 - Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (Adopted ISO 11140-4:2007, second edition, 2007-03-15) |
| ONORM EN ISO 12625-16 : 2015 | TISSUE PAPER AND TISSUE PRODUCTS - PART 16: DETERMINATION OF OPTICAL PROPERTIES - OPACITY (PAPER BACKING) - DIFFUSE REFLECTANCE METHOD (ISO 12625-16:2015) |
| BS 3983(1989) : AMD 7810 | METHOD FOR DETERMINATION OF THICKNESS AND APPARENT BULK DENSITY OR APPARENT SHEET DENSITY OF PAPER AND BOARD |
| BS 4468(1990) : 90 AMD 8176 | METHOD FOR DETERMINATION OF THE INTERNAL TEARING RESISTANCE OF PAPER |
| BS 2644(1991) : AMD 8174 | METHOD FOR DETERMINATION OF WATER ABSORPTIVENESS OF PAPER AND BOARD (COBB METHOD) |
| BS 3432:1980 | Method for determination of grammage of paper and board |
| ISO 5269-1:2005 | Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method |
| ISO 4677-1:1985 | Atmospheres for conditioning and testing Determination of relative humidity Part 1: Aspirated psychrometer method |
| AS 1301.403:2019 | Methods of test for pulp and paper Bursting strength of paper (ISO 2758:2014, MOD) |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| AS 1301.438:2019 | Methods of test for pulp and paper Bursting strength of board (ISO 2759:2014, MOD) |
| ISO 5269-2:2004 | Pulps — Preparation of laboratory sheets for physical testing — Part 2: Rapid-Köthen method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.