ISO 17842-1:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Safety of amusement rides and amusement devices — Part 1: Design and manufacture
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
09-12-2023
Language(s)
English
Published date
06-24-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 17842-1:2015 specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of the following: mobile, temporary or permanently installed machinery and structures, e.g. roundabouts, swings, boats, Ferris wheels, roller coasters, chutes, grandstands, membrane or textile structures, booths, stages, side shows, and structures for artistic aerial displays. These amusement devices are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Fixed grandstands, construction site installations, scaffolding, removable agricultural structures and simple coin operated children's amusement devices intended for up to 3 children are not covered.
It can nevertheless be used in the design of any similar structural or passenger-carrying device.
| Committee |
ISO/TC 254
|
| DevelopmentNote |
Supersedes ISO/DIS 17842-1. (06/2015)
|
| DocumentType |
Standard
|
| Pages |
158
|
| ProductNote |
THIS STANDARD ALSO REFERS TO EN 485,EN 755,EN 1677,EN 1677,EN 1993-1-1,EN 1993-1-8,EN 1993-1-9:2005,EN 1995-1-1, EN 1999-1-1,EN 10210,EN 10219,EN 1090,
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| Standards | Relationship |
| DS ISO 17842-1 : 2015 | Identical |
| NEN ISO 17842-1 : 2015 | Identical |
| BS ISO 17842-1:2015 | Identical |
| BS ISO 17842-3:2015 | Safety of amusement rides and amusement devices Requirements for inspection during design, manufacture, operation and use |
| ISO 17842-3:2015 | Safety of amusement rides and amusement devices Part 3: Requirements for inspection during design, manufacture, operation and use |
| ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements |
| ISO/TR 20172:2009 | Welding Grouping systems for materials European materials |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| ISO 10547:2009 | Polyester fibre ropes Double braid construction |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| BGR 181 : 2003 | FUSSBOEDEN IN ARBEITSRAEUMEN UND ARBEITSBEREICHEN MIT RUTSCHGEFAHR |
| ISO 1141:2012 | Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes |
| ISO 11666:2010 | Non-destructive testing of welds Ultrasonic testing Acceptance levels |
| ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
| ISO 10325:2009 | Fibre ropes High modulus polyethylene 8-strand braided ropes, 12-strand braided ropes and covered ropes |
| ISO 23277:2015 | Non-destructive testing of welds Penetrant testing Acceptance levels |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 10556:2009 | Fibre ropes of polyester/polyolefin dual fibres |
| ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| ISO/TR 23849:2010 | Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| ISO/TR 20173:2009 | Welding Grouping systems for materials American materials |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| ISO/TS 17929:2014 | Biomechanical effects on amusement ride passengers |
| EN 13889:2003+A1:2008 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 14731:2006 | Welding coordination Tasks and responsibilities |
| ISO 10572:2009 | Mixed polyolefin fibre ropes |
| ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 9554:2010 | Fibre ropes General specifications |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 23278:2015 | Non-destructive testing of welds Magnetic particle testing Acceptance levels |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| DIN 51130:2014-02 | Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test |
| ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 10554:2009 | Polyamide fibre ropes Double braid construction |
| ISO 9692-1:2013 | Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 1181:2004 | Fibre ropes — Manila and sisal — 3-, 4- and 8-strand ropes |
| EN 1069-1:2017 | Water slides - Part 1: Safety requirements and test methods |
| IEC 60364-7-740:2000 | Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ISO 9692-3:2016 | Welding and allied processes Types of joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| EN 50172:2004 | Emergency escape lighting systems |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| AS 3533.1-2009 | Amusement rides and devices Design and construction |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| ISO 2307:2010 | Fibre ropes Determination of certain physical and mechanical properties |
| ISO 1346:2012 | Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) 3-, 4-, 8- and 12-strand ropes |
| EN 1261:1995 | Fibre ropes for general service - Hemp |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| GOST R 53130 : 2008 | SAFETY OF ATTRACTIONS - GENERAL REQUIREMENTS |
| ISO 23279:2017 | Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds |
| ISO 9692-2:1998 | Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| EN 288-9 : 1999 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST FOR PIPELINE WELDING ON LAND AND OFFSHORE SITE BUTT WELDING OF TRANSMISSION PIPELINES |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
| IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| GOST 12.2.049 : 1980 | OCCUPATIONAL SAFETY STANDARDS SYSTEM - INDUSTRIAL EQUIPMENT - GENERAL ERGONOMIC REQUIREMENTS |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| ISO 4018:2011 | Hexagon head screws Product grade C |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| DIN 51097:2016-04 (Draft) | TESTING OF FLOOR COVERINGS; DETERMINATION OF THE ANTI SLIP PROPERTIES; WET LOADED BAREFOOT AREAS; WALKING METHOD; RAMP TEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.