ISO 17641-2:2015
Current
The latest, up-to-date edition.
Destructive tests on welds in metallic materials Hot cracking tests for weldments Arc welding processes Part 2: Self-restraint tests
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
10-22-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 17641-2:2015 specifies the required specimens, the test piece dimensions, and the procedures to be followed to carry out self-restraint hot cracking tests.
The following tests are described:
- T-joint weld cracking test;
- weld metal tensile test;
- longitudinal bend test.
The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials.
ISO 17641-2:2015 applies primarily to fully austenitic stainless steels, nickel, nickel base, and nickel copper weld metals. This part of ISO 17641 can also be used for other weld metals.
ISO 17641-2:2015 describes only how to carry out the tests and report the results. It does not give any acceptance criteria.
| DevelopmentNote |
Supersedes ISO/FDIS 17641-2. (10/2015)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 17641-2:2015 | Identical |
| NF EN ISO 17641-2 : 2015 | Identical |
| UNE-EN ISO 17641-2:2016 | Identical |
| NBN EN ISO 17641-2 : 2015 | Identical |
| NEN EN ISO 17641-2 : 2015 | Identical |
| NS EN ISO 17641-2 : 2005 | Identical |
| I.S. EN ISO 17641-2:2015 | Identical |
| PN EN ISO 17641-2 : 2015 | Identical |
| SN EN ISO 17641-2 : 2016 | Identical |
| UNI EN ISO 17641-2 : 2006 | Identical |
| BS EN ISO 17641-2:2015 | Identical |
| EN ISO 17641-2:2015 | Identical |
| GOST R ISO 17641-2 : 2012 | Identical |
| DIN EN ISO 17641-2:2016-03 | Identical |
| DIN EN ISO 17641-1:2004-10 | Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17641-1:2004) |
| ISO 17641-1:2004 | Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 1: General |
| EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN ISO 17641-1:2004 | Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17641-1:2004) |
| BS EN ISO 17641-1:2004 | Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes General |
| ISO 17641-1:2004 | Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc welding processes — Part 1: General |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15792-1:2000 | Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys |
| ISO 5178:2001 | Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.