ISO 17409:2015
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Electrically propelled road vehicles Connection to an external electric power supply Safety requirements
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
02-28-2020
English, French
10-23-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 17409:2015 specifies electric safety requirements for conductive connections of electrically propelled road vehicles to an external electric power supply using a plug or vehicle inlet.
It applies to electrically propelled road vehicles with voltage class B electric circuits. In general, it may apply to motorcycles and mopeds if no dedicated standards for these vehicles exist.
It applies only to vehicle power supply circuits. It applies also to dedicated power supply control functions used for the connection of the vehicle to an external electric power supply.
It does not provide requirements regarding the connection to a non-isolated d.c. charging station.
It does not provide comprehensive safety information for manufacturing, maintenance, and repair personnel.
The requirements when the vehicle is not connected to the external electric power supply are specified in ISO 64693.
NOTE 1 This International Standard does not contain requirements for vehicle power supply circuits using protection by class II or double/reinforced insulation but it is not the intention to exclude such vehicle applications.
NOTE 2 Requirements for EV supply equipment are specified in IEC 61851.
| DevelopmentNote |
Supersedes ISO/DIS 17409. (10/2015)
|
| DocumentType |
Standard
|
| Pages |
23
|
| ProductNote |
THIS STANDARD ALSO HAVE CORRECT VERSION FOR ENGLISH FOR THE YEAR 2015 THIS STANDARD ALSO REFERS TO ISO/IEC 15118
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN ISO 17409:2017 | Identical |
| ONORM EN ISO 17409 : 2017 | Identical |
| DIN EN ISO 17409:2016-09 (Draft) | Identical |
| NS EN ISO 17409 : 2017 | Identical |
| SS-EN ISO 17409:2017 | Identical |
| UNI EN ISO 17409 : 2017 | Identical |
| PN-EN ISO 17409:2017-03 | Identical |
| SN EN ISO 17409 : 2017 | Identical |
| I.S. EN ISO 17409:2017 | Identical |
| NEN EN ISO 17409 : 2017 | Identical |
| EN ISO 17409:2017 | Identical |
| BS EN ISO 17409:2017 | Identical |
| NF EN ISO 17409 : 2017 | Identical |
| BS ISO 17409 : 2015 | Identical |
| ISO/PAS 19363:2017 | Electrically propelled road vehicles Magnetic field wireless power transfer Safety and interoperability requirements |
| 17/30345266 DC : 0 | BS ISO 6469-3 - ELECTRICALLY PROPELLED ROAD VEHICLES - SAFETY SPECIFICATIONS - PART 3: ELECTRICAL SAFETY |
| I.S. EN ISO 18246:2017 | ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY (ISO 18246:2015) |
| IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
| IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| 17/30336998 DC : 0 | BS IEC 62969-4 ED.1.0 - SEMICONDUCTOR DEVICES - SEMICONDUCTOR INTERFACES FOR AUTOMOTIVE VEHICLES - PART 4: EVALUATION METHOD OF DATA INTERFACE FOR AUTOMOTIVE VEHICLE SENSORS |
| BS EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles. Safety requirements for conductive connection to an external electric power supply |
| I.S. EN 62752:2016/AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| UNE-EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015) |
| IEC 62955:2018 | Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles |
| BS ISO 18246 : 2015 | ELECTRICALLY PROPELLED MOPEDS AND MOTORCYCLES - SAFETY REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN EXTERNAL ELECTRIC POWER SUPPLY |
| EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| IEC TS 62840-1:2016 | Electric vehicle battery swap system - Part 1: General and guidance |
| ISO 18246:2015 | Electrically propelled mopeds and motorcycles — Safety requirements for conductive connection to an external electric power supply |
| EN ISO 18246:2017 | Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2015) |
| PD IEC/TS 62840-1:2016 | Electric vehicle battery swap system General and guidance |
| CEI EN 62752 : 1ED 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| IEC 62196-3:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| IEC 60038:2009 | IEC standard voltages |
| ISO 6469-2:2009 | Electrically propelled road vehicles Safety specifications Part 2: Vehicle operational safety means and protection against failures |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| ISO 16750-4:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
| IEC 62196-2:2016 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
| IEC TS 62763:2013 | Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire |
| IEC 62196-3:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers |
| IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV | Plugs and socket-outlets for household and similar purposes - Part1: General requirements |
| ISO 6469-1:2009 | Electrically propelled road vehicles Safety specifications Part 1: On-board rechargeable energy storage system (RESS) |
| ISO 20653:2013 | Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against foreign objects, water and access |
| IEC 61557-2:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
| IEC 60364-6:2016 | Low voltage electrical installations - Part 6: Verification |
| ISO 6469-3:2011 | Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock |
| IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
| IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
| IEC 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.