ISO 16904:2016
Current
The latest, up-to-date edition.
Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
02-12-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 16904:2016 specifies the design, minimum safety requirements and inspection and testing procedures for liquefied natural gas (LNG) marine transfer arms intended for use on conventional onshore LNG terminals, handling LNG carriers engaged in international trade. It can provide guidance for offshore and coastal operations. It also covers the minimum requirements for safe LNG transfer between ship and shore.
Although the requirements for power/control systems are covered, this International Standard does not include all the details for the design and fabrication of standard parts and fittings associated with transfer arms.
ISO 16904:2016 is supplementary to local or national standards and regulations and is additional to the requirements of ISO 28460.
ISO 16904:2016 needs not be applied to existing facilities.
| DevelopmentNote |
Supersedes ISO/DIS 16904. (02/2016)
|
| DocumentType |
Standard
|
| Pages |
67
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 16904:2016-11 | Identical |
| NF EN ISO 16904 : 2016 | Identical |
| NBN EN ISO 16904 : 2016 | Identical |
| NEN EN ISO 16904 : 2016 | Identical |
| NS EN ISO 16904 : 2016 | Identical |
| I.S. EN ISO 16904:2016 | Identical |
| PN EN ISO 16904 : 2016 | Identical |
| SN EN ISO 16904 : 2016 | Identical |
| UNI EN ISO 16904 : 2016 | Identical |
| UNE-EN ISO 16904:2016 | Identical |
| BS EN ISO 16904:2016 | Identical |
| EN ISO 16904:2016 | Identical |
| DIN EN ISO 16904:2013-04 (Draft) | Identical |
| BS EN ISO 20519:2017 | Ships and marine technology. Specification for bunkering of liquefied natural gas fuelled vessels |
| I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
| PREN 1473 : DRAFT 2018 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
| UNE-EN ISO 20519:2017 | Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017) |
| I.S. EN ISO 20519:2017 | SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF LIQUEFIED NATURAL GAS FUELLED VESSELS (ISO 20519:2017) |
| ISO 20519:2017 | Ships and marine technology Specification for bunkering of liquefied natural gas fuelled vessels |
| EN ISO 20519:2017 | Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017) |
| 18/30369304 DC : DRAFT APR 2018 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| DIN EN ISO 20519:2016-05 (Draft) | SHIPS AND MARINE TECHNOLOGY - SPECIFICATION FOR BUNKERING OF LIQUEFIED NATURAL GAS FUELLED VESSELS (ISO 20519:2017) |
| BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
| DIN EN ISO 20519:2017-06 | Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels (ISO 20519:2017) |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| IEC 62305-1:2010 | Protection against lightning - Part 1: General principles |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| ISO 28460:2010 | Petroleum and natural gas industries Installation and equipment for liquefied natural gas Ship-to-shore interface and port operations |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 9001:2015 | Quality management systems — Requirements |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| ISO 1460:1992 | Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area |
| IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| ISO 76:2006 | Rolling bearings Static load ratings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.