ISO 161-1:1996
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Thermoplastics pipes for the conveyance of fluids Nominal outside diameters and nominal pressures Part 1: Metric series
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-20-2019
Superseded by
Language(s)
English, French
Published date
12-26-1996
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies the nominal outside diameters for metric thermoplastics pipes for the conveyance of fluids under pressure and non-pressure. It also specifies nominal pressure ratings and minimum required strengths for pipes for pressure applications.
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN 16983:1980-05 | Identical |
| DIN 16890:1980-05 | Identical |
| GOST ISO 161-1 : 2004 | Identical |
| SAC GB/T 4217 : 2008 | Identical |
| DIN 16891:1980-05 | Identical |
| DIN 8073:1976-03 | Identical |
| DIN 8072:1972-07 | Identical |
| BS ISO 161-1:2018 | Identical |
| DS ISO 161-1 : 2018 | Identical |
| SN ISO 161-1 : 1996 | Identical |
| DIN 8062:2009-10 | Identical |
| BS 4660(1989) : 1989 | Similar to |
| BS ISO 727-1:2002 | Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure Metric series |
| 17/30339710 DC : 0 | BS ISO 21138-3 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: PIPES AND FITTINGS WITH NON-SMOOTH EXTERNAL SURFACE, TYPE B |
| 17/30339707 DC : 0 | BS ISO 21138-2 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 2: PIPES AND FITTINGS WITH SMOOTH EXTERNAL SURFACE, TYPE A |
| 16/30292774 DC : 0 | BS ISO 10639 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| ASTM F 1901 : 2016 : REDLINE | Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
| UNI EN 15014 : 2008 | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| 11/30239906 DC : 0 | BS EN 15014 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR WATER AND OTHER LIQUIDS UNDER PRESSURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| 13/30280432 DC : 0 | BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS |
| DIN 16834:2009-10 | Pipes of raised-temperature-resistance polyethylene (PE-RT) - PE-RT Type I and PE-RT Type II - Dimensions |
| 12/30257534 DC : 0 | BS ISO 18225 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS |
| 04/30126883 DC : DRAFT DEC 2004 | ISO 4437 - BURIED POLYETHYLENE (PE) PIPES FOR THE SUPPLY OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS |
| BS 8588:2017 | Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land. Size 20 mm to 630 mm |
| 05/30132152 DC : DRAFT APR 2005 | ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY |
| BS EN ISO 13477:2008 | Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Small-scale steady-state test (S4 test) |
| BS EN 50086-2-4:1994 | Specification for conduit systems for cable management. Particular requirements Conduit systems buried underground |
| ISO 15439-2:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 2: Pipes |
| ISO/TR 4191:2014 | Plastics piping systems for water supply Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) Guidance for installation |
| I.S. EN ISO 13477:2008 | THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP) - SMALL-SCALE STEADY-STATE TEST (S4 TEST) |
| ISO 19220:2004 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Styrene copolymer blends (SAN + PVC) |
| ISO 8770:2003 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE) |
| ISO 9624:1997 | Thermoplastics pipes for fluids under pressure Mating dimensions of flange adapters and loose backing flanges |
| ISO 7370:1983 | Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings Nominal diameters, specified diameters and standard lengths |
| 17/30363921 DC : 0 | BS EN 17176-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 2: PIPES |
| ISO 22621-2:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 2: Pipes |
| DIN 16893:2000-09 | CROSSLINKED POLYETHYLENE (PE-X) PIPES - DIMENSIONS |
| ISO 17484-1:2014 | Plastics piping systems — Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Part 1: Specifications for systems |
| DIN EN 15014:2014-06 (Draft) | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| BS EN 15014:2007 | Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints |
| DIN 16831-2:2003-05 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 2: DIMENSIONS OF INJECTION-MOULDED TEES FOR SOCKET WELDING |
| DIN EN ISO 15748-2:2002-09 | SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 2: METHOD OF CALCULATION |
| EN 12484-2:2000 | Irrigation techniques - Automatic turf irrigation systems - Part 2: Design and definition of typical technical templates |
| EN 50086-2-4:1994/A1:2001 | SPECIFICATION FOR CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR CONDUIT SYSTEMS BURIED UNDERGROUND |
| NF EN ISO 13479 : 2009 | POLYOLEFIN PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO CRACK PROPAGATION - TEST METHOD FOR SLOW CRACK GROWTH ON NOTCHED PIPES |
| DIN 8063-10:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 10: WALL BRACKET ELBOWS - DIMENSIONS |
| ASTM F 876 : 2017 : REDLINE | SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING |
| BS ISO 17467-2:2012 | Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Pipes |
| PREN 50626-1 : DRAFT 2017 | CONDUIT SYSTEMS BURIED UNDERGROUND FOR THE PROTECTION AND MANAGEMENT OF INSULATED ELECTRICAL CABLES OR COMMUNICATION CABLES - PART 1: GENERAL REQUIREMENTS |
| 04/30126864 DC : DRAFT DEC 2004 | ISO 18225 - PLASTIC PIPING SYSTEMS - MULTILAYER PIPING SYSTEMS FOR OUTDOOR GAS INSTALLATIONS - SPECIFICATIONS FOR SYSTEMS |
| ISO 7682:2003 | Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene (ABS) |
| 04/30126871 DC : DRAFT DEC 2004 | ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTI-LAYERED PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR - PART 1: SPECIFICATIONS FOR SYSTEMS |
| 03/115115 DC : DRAFT OCT 2003 | ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER - SPECIFICATIONS |
| DIN 8077:2008-09 | POLYPROPYLENE (PP) PIPES - PP-H, PP-B, PP-R, PP-RCT - DIMENSIONS |
| PREN 17176-3 : DRAFT 2017 | PLASTIC PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 3: FITTINGS |
| 03/102146 DC : DRAFT MAY 2003 | EN ISO 1167-2 - THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 2: PREPARATION OF PIPE TEST PIECES |
| DIN 8074:2011-12 | Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English |
| BS 2782-11:Method 1121C:1997 | Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series |
| FM 1614 : 2017 | FIBER REINFORCED COMPOSITE (FRC) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE |
| 04/30081969 DC : DRAFT AUG 2004 | ISO 6993-1 - BURIED, HIGH-IMPACT POLY (VINYL CHLORIDE) (PVC-HI) PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - PART 1: PIPES OPERATING PRESSURE OF 1 BAR (100 KPA) |
| PREN 15014 : DRAFT 2014 | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR WATER UNDER PRESSURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| ISO 10467:2004 | Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| ISO 4065:2018 | Thermoplastics pipes — Universal wall thickness table |
| ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels Metric series Specifications |
| ISO 727-1:2002 | Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure — Part 1: Metric series |
| NF EN ISO 21003-2 : 2008 AMD 1 2011 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES |
| BS EN 28233:1992 | Thermoplastics valves. Torque. Test method |
| BS EN ISO 15748-1:2002 | Ships and marine technology. Potable water supply on ships and marine structures Planning and design |
| ISO 13477:2008 | Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test) |
| DIN 8063-6:1980-07 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 6: INJECTION-MOULDED ELBOWS FOR SOLVENT CEMENTING - DIMENSIONS |
| I.S. EN ISO 13479:2009 | POLYOLEFIN PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO CRACK PROPAGATION - TEST METHOD FOR SLOW CRACK GROWTH ON NOTCHED PIPES |
| DIN 16895:1996-06 | CROSSLINKED MEDIUM DENSITY POLYETHYLENE (PE-MDX) PIPES - DIMENSIONS |
| DIN 16874:2000-06 | PIPES AND FITTINGS OF HIGH-DENSITY POLYETHYLENE (PE-HD) FOR CABLE DUCTING - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
| DIN EN 15014:2008-01 | Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints |
| DIN 8063-3:1980-07 | PIPE JOINT ASSEMBLIES AND FITTINGS FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PRESSURE PIPES - PART 3: DIMENSIONS OF SCREWED PIPE JOINT ASSEMBLIES |
| I.S. EN 15014:2007 | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| DIN 16876:2000-11 | PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR DUCTING - DIMENSIONS AND TECHNICAL DELIVERY CONDITIONS |
| DIN 8063-8:1980-07 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 8: INJECTION-MOULDED SOCKETS, CAPS AND NIPPLES FOR SOLVENT CEMENTING - DIMENSIONS |
| VDE 0605-2-4 : 2001 | CONDUIT SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR CONDUIT SYSTEMS BURIED UNDERGROUND |
| BS 3505:1986 | Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water |
| BS 3867:1987 | Method of specifying outside diameters and pressure ratings for pipe of thermoplastics materials (inch series) |
| DIN EN ISO 21003-2:2011-07 | Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008 + Amd 1:2011) (includes Amendment A1:2011) |
| ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| BS EN 61386-24:2010 | Conduit systems for cable management Particular requirements. Conduit systems buried underground |
| BS 2782-11.1132(1992) : 1992 | METHODS OF TESTING PLASTICS - THERMOPLASTICS VALVES - FATIGUE STRENGTH - TEST METHOD |
| DIN 8079:2009-10 | Chlorinated polyvinyl chloride (PVC-C) pipes - Dimensions |
| DIN ISO 16486-2:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2: Pipes (ISO 16486-2:2012 + AMD 1:2014) |
| 17/30351673 DC : 0 | BS ISO 11922-1 - THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DIMENSIONS AND TOLERANCES - PART 1: METRIC SERIES |
| 03/308785 DC : DRAFT AUG 2003 | IEC 61386-24 ED.1 - CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 24: PARTICULAR REQUIREMENT FOR CONDUIT SYSTEMS BURIED UNDERGROUND |
| BS 2782-11.S 1160A&B(1998) : 1998 | THERMOPLASTICS PIPES FOR INDUSTRIAL APPLICATIONS UNDER PRESSURE - DETERMINATION OF THE CHEMICAL RESISTANCE FACTOR AND OF THE BASIC STRESS - POLYOLEFIN PIPES |
| DIN 16842:2013-05 | Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English |
| 16/30340367 DC : 0 | BS 8588 - POLYEPTRHEYSLSEUNREE PIPES WITH AN ALUMINIUM BARRIER LAYER AND ASSOCIATED FITTINGS FOR POTABLE WATER SUPPLY IN CONTAMINATED LAND - SIZE 20 MM TO 630 MM |
| ISO 16631:2016 | Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement |
| 16/30315829 DC : 0 | BS ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION |
| 04/30107711 DC : DRAFT JAN 2004 | ISO/DIS 14531-3 - PLASTIC PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE CONVEYANCE OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 3: FITTINGS FOR MECHANICAL JOINTING (INCLUDING PE-X/METAL TRANSITIONS) |
| BS ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications |
| 00/120644 DC : DRAFT FEB 2000 | ISO/DIS 10639-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS - (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| BS ISO 14531-1:2002 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Pipes |
| ASTM F 2929 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
| PREN 17176-2 : DRAFT 2017 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 2: PIPES |
| ISO 8584-1:1990 | Thermoplastics pipes for industrial applications under pressure Determination of the chemical resistance factor and of the basic stress Part 1: Polyolefin pipes |
| ISO 4427:1996 | Polyethylene (PE) pipes for water supply Specifications |
| ISO 21138-3:2007 | Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Pipes and fittings with non-smooth external surface, Type B |
| BS EN ISO 15748-2:2002 | Ships and marine technology. Potable water supply on ships and marine structures Method of calculation |
| ISO 15748-2:2002 | Ships and marine technology — Potable water supply on ships and marine structures — Part 2: Method of calculation |
| ISO 13479:2009 | Polyolefin pipes for the conveyance of fluids Determination of resistance to crack propagation Test method for slow crack growth on notched pipes |
| EN ISO 15748-1:2002 | Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design (ISO 15748-1:2002) |
| UNI EN ISO 13479 : 2009 | POLYOLEFIN PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO CRACK PROPAGATION - TEST METHOD FOR SLOW CRACK GROWTH ON NOTCHED PIPES |
| BS 4660(1989) : 1989 | SPECIFICATION FOR UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES AND PLASTICS FITTINGS OF NOMINAL SIZES 110 AND 160 FOR BELOW GROUND GRAVITY DRAINAGE AND SEWERAGE |
| ONORM EN ISO 21003-2 : 2011 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES (ISO 21003-2:2008 + AMD 1:2011) |
| ONORM EN ISO 13479 : 2010 | POLYOLEFIN PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO CRACK PROPAGATION - TEST METHOD FOR SLOW CRACK GROWTH ON NOTCHED PIPES |
| DIN EN ISO 13477:2008-06 | THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP) - SMALL-SCALE STEADY-STATE TEST (S4 TEST) |
| DIN 16969:2012-11 | PIPES MADE OF POLYBUTENE-1 (PB-1) - PB 125 - DIMENSIONS |
| 01/123351 DC : DRAFT SEP 2001 | ISO/DIS 10639.3 - PLASTIC PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| 04/30118843 DC : DRAFT SEP 2004 | EN 15014 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE |
| NF EN 61386-24 : 2011 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 24: PARTICULAR REQUIREMENTS - CONDUIT SYSTEMS BURIED UNDERGROUND |
| ISO 17467-2:2012 | Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 2: Pipes |
| 11/30211183 DC : 0 | BS ISO 16422 - PIPES AND JOINTS MADE OF ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) FOR THE CONVEYANCE OF WATER UNDER PRESSURE - SPECIFICATIONS |
| PD ISO/TR 4191:2014 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O). Guidance for installation |
| SS UNI E13.08.497.0 : 1990 | UNPLASTICIZED PVC PIPES UNDER PRESSURE - TYPES, DIMENSIONS AND REQUIREMENTS |
| DIN 8075:2011-12 | POLYETHYLENE (PE) PIPES - PE 80, PE 100 - GENERAL QUALITY REQUIREMENTS, TESTING |
| I.S. EN 61386-24:2010 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 24: PARTICULAR REQUIREMENTS - CONDUIT SYSTEMS BURIED UNDERGROUND |
| DIN 8063-8:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 8: INJECTION-MOULDED SOCKETS, CAPS AND NIPPLES FOR SOLVENT CEMENTING - DIMENSIONS |
| DIN 8062:2009-10 | Unplasticized polyvinyl chloride (PVC-U) pipes - Dimensions |
| BS 5556:1978 | Specification for general requirements for dimensions and pressure ratings for pipe of thermoplastics materials (metric series) |
| BS 2782-11:Method 1127P:1997 | Methods of testing plastics. Thermoplastics pipes, fittings and valves Thermoplastics pipes, for the conveyance of fluids. Resistance to internal pressure. Test method |
| 11/30248333 DC : 0 | BS ISO 17467-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 2: PIPES |
| 02/121757 DC : DRAFT APR 2002 | BS ISO 19220 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - STYRENE COPOLYMER BLENDS (SAN + PVC) |
| 16/30343625 DC : 0 | BS ISO 10467 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| ASTM F 714 : 2013 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
| BS 5480:1990 | Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
| BS 2782-11.1131(1992) : 1992 | METHODS OF TESTING PLASTICS - THERMOPLASTIC VALVES - TORQUE - TEST METHOD |
| ISO 6993-4:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 4: Code of practice for design, handling and installation |
| UNI EN ISO 21003-2 : 2011 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES |
| UNE-EN 61386-24:2011 | Conduit systems for cable management -- Part 24: Particular requirements - Conduit systems buried underground |
| ISO 11922-1:2018 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| BS ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings |
| NF EN ISO 13477 : 2008 | THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP) - SMALL-SCALE STEADY-STATE TEST (S4 TEST) |
| PREN 61386-24 : DRAFT 2009 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 24: PARTICULAR REQUIREMENTS - CONDUIT SYSTEMS BURIED UNDERGROUND |
| ISO 3663:1976 | Polyethylene (PE) pressure pipes and fittings, metric series — Dimensions of flanges |
| I.S. EN ISO 21003-2:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES |
| UNI EN ISO 13477 : 2008 | THERMOPLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO RAPID CRACK PROPAGATION (RCP) - SMALL-SCALE STEADY-STATE TEST (S4 TEST) |
| FM 1612 : 2016 | POLYVINYL CHLORIDE (PVC) PIPE AND FITTING FOR UNDERGROUND FIRE PROTECTION SERVICE |
| CEI EN 61386-24 : 2011 | CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 24: PARTICULAR REQUIREMENTS - CONDUIT SYSTEMS BURIED UNDERGROUND |
| ISO 14531-1:2002 | Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes |
| ISO 16486-2:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 2: Pipes |
| ISO 6993:2001 | Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels Specifications |
| DIN EN ISO 13479:2010-01 | Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009) |
| IEC 61386-24:2004 | Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground |
| BS EN 28659:1992 | Thermoplastics valves. Fatigue strength. Test method |
| ISO 21003-2:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes |
| ISO 15748-1:2002 | Ships and marine technology — Potable water supply on ships and marine structures — Part 1: Planning and design |
| ISO 14236:2000 | Plastics pipes and fittings Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems |
| BS EN 12484-2:2000 | Irrigation techniques. Automatic turf irrigation systems Design and definition of typical technical templates |
| BS EN ISO 13479:2009 | Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes |
| DIN EN ISO 15748-1:2002-09 | SHIPS AND MARINE TECHNOLOGY - POTABLE WATER SUPPLY ON SHIPS AND MARINE STRUCTURES - PART 1: PLANNING AND DESIGN |
| EN ISO 13479:2009 | Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009) |
| EN 28233:1990 | Thermoplastics valves - Torque - Test method (ISO 8233:1988) |
| EN 15014:2007 | Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints |
| EN ISO 15748-2:2002 | Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation (ISO 15748-2:2002) |
| EN 28659:1990 | Thermoplastics valves - Fatigue strength - Test method (ISO 8659:1989) |
| EN ISO 13477:2008 | Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008) |
| DIN 8063-6:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 6: INJECTION-MOULDED ELBOWS FOR SOLVENT CEMENTING - DIMENSIONS |
| DIN 8063-5:1999-10 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) FOR PIPES UNDER PRESSURE - PART 5: GENERAL QUALITY REQUIREMENTS, TESTING |
| 05/30130526 DC : DRAFT MAR 2005 | ISO 22621-2 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 2: PIPES |
| ISO 21004:2006 | Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply |
| FM 1613 : 2017 | POLYETHYLENE (PE) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE |
| 10/30234867 DC : 0 | BS ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION |
| ISO 18225:2012 | Plastics piping systems — Multilayer piping systems for outdoor gas installations — Specifications for systems |
| ISO 21138-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Pipes and fittings with smooth external surface, Type A |
| BS 2782-11.1109N(1997) : 1997 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - POLYOLEFIN PIPES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF RESISTANCE TO CRACK PROPAGATION - TEST METHOD FOR SLOW CRACK GROWTH ON NOTCHED PIPES (NOTCH TEST) |
| BS ISO 18225:2012 | Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems |
| BS ISO 8584-1:1990 | Thermoplastics pipes for industrial applications under pressure. Determination of the chemical resistance factor and of the basic stress Polyolefin pipes |
| BS ISO 17484-1:2014 | Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) Specifications for systems |
| BS ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| BS ISO 16422:2014 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| 11/30237753 DC : 0 | BS ISO 17484-1 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPE SYSTEMS FOR INDOOR GAS INSTALLATIONS WITH A MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 5 BAR (500 KPA) - PART 1: SPECIFICATIONS FOR SYSTEMS |
| DIN 8063-3:2002-06 | PIPE JOINTS AND COMPONENTS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC U) FOR PIPES UNDER PRESSURE - PART 3: UNIONS - DIMENSIONS |
| 09/30211789 DC : 0 | BS EN 61386-24 - CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 24: PARTICULAR REQUIREMENTS - CONDUIT SYSTEMS BURIED UNDERGROUND |
| 05/30130517 DC : DRAFT MAR 2005 | ISO 12176-1 - PLASTICS PIPES AND FITTINGS - EQUIPMENT FOR FUSION-JOINTING POLYETHYLENE SYSTEMS - PART 1: BUTT FUSION |
| BS 7159:1989 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| BS EN ISO 21003-2 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES |
| ASAE S376.1 : 1992 | DESIGN, INSTALLATION AND PERFORMANCE OF UNDERGROUND, THERMOPLASTIC IRRIGATION PIPELINES |
| ISO/TS 18226:2006 | Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
| ISO 16422:2014 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications |
| ISO 6993-1:2006 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) |
| UNE-ISO 16422:2015 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| 14/30297465 DC : 0 | BS EN 15014 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR WATER UNDER PRESSURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| 17/30363927 DC : 0 | BS EN 17176-3 - PLASTIC PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 3: FITTINGS |
| ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
| DIN 16831-1:2003-05 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 1: DIMENSIONS OF INJECTION-MOULDED ELBOWS FOR SOCKET WELDING |
| DIN 16831-4:2003-05 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 4: DIMENSIONS OF INJECTION-MOULDED REDUCERS FOR SOCKET WELDING |
| DIN 16831-3:2003-05 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 3: DIMENSIONS OF INJECTION-MOULDED SOCKETS AND CAPS FOR SOCKET WELDING |
| DIN 16963-5:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 5: GENERAL QUALITY REQUIREMENTS, TESTING |
| DIN 16831-6:2003-06 | PIPE FITTINGS AND JOINT ASSEMBLIES FOR POLYBUTENE PRESSURE PIPES - TYPE PB 125 - PART 6: DIMENSIONS OF FITTINGS FOR RESISTANCE WELDING |
| EN 61386-24:2010 | Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.