ISO 15713:2006
Current
The latest, up-to-date edition.
Stationary source emissions Sampling and determination of gaseous fluoride content
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
06-09-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 15713:2006 is applicable to the measurement of the gaseous fluorides that are entrained in gases carried in stacks or ducts. The gaseous fluoride content is expressed as a mass of hydrogen fluoride in the stack gas.
ISO 15713:2006 is applicable to all stacks emitting gases with fluoride concentrations of below 200 mg/m3. It can be used for higher concentrations, but then the absorption efficiency of the bubblers should be checked before the results can be regarded as valid. The detection limit of the method is estimated as 0,1 mg m-3, based on a sample volume of 0,1 m3. All compounds that are volatile at the filtration temperature and produce soluble fluoride compounds upon reaction with water are measured by this method. The method does not measure fluorocarbons. The concentration of fluoride in the adsorbent solution is then measured using an ion selective electrode. The amount of fluoride measured is then expressed as hydrogen fluoride by convention, though this may not reflect the chemical nature of the compounds, which are measured.
| DevelopmentNote |
Supersedes ISO/DIS 15713 (06/2006)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF ISO 15713 : 2006 | Identical |
| UNE-ISO 15713:2007 | Identical |
| GOST R ISO 15713 : 2009 | Identical |
| SS-ISO 15713 : 2006 | Identical |
| NEN ISO 15713 : 2011 | Identical |
| BS ISO 15713:2006 | Identical |
| BS EN 16723-2:2017 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network Automotive fuels specification |
| 17/30326671 DC : 0 | BS ISO 27919-1 - CARBON DIOXIDE CAPTURE - PART 1: PERFORMANCE EVALUATION METHODS FOR POST-COMBUSTION CO[2] CAPTURE INTEGRATED WITH A POWER PLANT |
| 14/30296490 DC : 0 | BS EN 16723-2 - NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUEL SPECIFICATIONS |
| I.S. EN 16723-2:2017 | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION |
| DIN EN 16723-2:2017-10 | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION |
| DIN EN 16723-2:2014-06 (Draft) | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 2: AUTOMOTIVE FUELS SPECIFICATION |
| I.S. EN ISO 13833:2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION (ISO 13833:2013) |
| 11/30227244 DC : 0 | BS EN ISO 13833 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION |
| 14/30296487 DC : 0 | BS EN 16723-1 - NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 1: SPECIFICATIONS FOR BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK |
| I.S. EN 16723-1:2016 | NATURAL GAS AND BIOMETHANE FOR USE IN TRANSPORT AND BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK - PART 1: SPECIFICATIONS FOR BIOMETHANE FOR INJECTION IN THE NATURAL GAS NETWORK |
| EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
| UNE-EN 16723-1:2017 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 1: Specifications for biomethane for injection in the natural gas network |
| BS EN 16723-1:2016 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network Specifications for biomethane for injection in the natural gas network |
| BS EN ISO 13833:2013 | Stationary source emissions. Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide. Radiocarbon sampling and determination |
| UNI EN ISO 13833 : 2013 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION |
| S.R. CWA 16060:2009 | ENVIRONMENTAL TECHNOLOGY VERIFICATION - AIR EMISSION ABATEMENT TECHNOLOGIES |
| ISO 13833:2013 | Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination |
| EN 16723-2:2017 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 2: Automotive fuels specification |
| EN 16723-1:2016 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network - Part 1: Specifications for biomethane for injection in the natural gas network |
| DIN EN ISO 13833:2013-07 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE RATIO OF BIOMASS (BIOGENIC) AND FOSSIL-DERIVED CARBON DIOXIDE - RADIOCARBON SAMPLING AND DETERMINATION (ISO 13833:2013) |
| UNE-EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
| UNE-CWA 16060:2010 IN | Environmental technology verification - Air emission abatement technologies |
| ISO 10780:1994 | Stationary source emissions — Measurement of velocity and volume flowrate of gas streams in ducts |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.